Email security Q: Connection to server succeeded; login not required

Hi everyone
I ran the Mail Connection Doctor on my mac at home this morning as I was having trouble sending an email. One of my email accounts (SMTP) has come back with:
"Connection to server succeeded; login not required. "
I am just wondering what that means security wise? As it is my work email I am a bit worried that perhaps the IT people didn't set it up right? They've been having a lot of trouble with someone spoofing the boss's email too.
Does that mean that anyone who knows this email servers details can just use it?
All my other email accounts come back with "Connection and login to server succeeded".

Dear Samir,
In order to try to resolve the issue, please do the following steps :-
1. Go to Add/Remove Program --> Uninstall SAP Business One Client.
2. Go to C:\Program Files\SAP, then take a backup of the SAP Business One Folder and
    then delete the SAP Business One folder.
3. Go to Start --> Run --> %UserProfile%\AppData\Local\SAP\
    Then delete the SAP Business One Folder.
4. Now reinstall the SAP Business One Client application from the B1_SHR.
Now you can login and enter all the details information and then log out from SAP Business One
application. You can open the application again and check this issue.
Note : Please make sure that the Windows user has read and write access to the above two folders
          as per step (2) and (3).
Regards,
Rakesh Pati
SAP Business One Forum Team.

Similar Messages

I have internet connection but my incoming email does not appear. When I try to access new email it says, " connection to server has failed" Help

I have internet connection but myh incoming email does not appear. When I try to access new emails it says, "connection to server has failed". Help

What did your email provider say about it when you contacted them?

Email app says connection to server failed

Email app says connection to server failed

I had the same message. and remembered I had changed my yahoo password. Try going into settings/mail/password and make sure you have the most current password in there...

When sending emails it says connection to server lost can anyone help

I have an iPad which is not sending emails, it says connection to server failed, anyone got a clue please

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.htmlhttp://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.htmlhttp://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

MacBook Pro (OS X 10.9.1) calendar continues to "connect to server" and will not allow shut down or restart. Force quit worked. How can I make this calendar "behave"?

MacBook Pro (OS X 10.9.1) calendar continues to "connect to server" and will not allow shut down or restart. Force quit worked. How can I make this calendar usable? The problem began after I updated to Maverick.

babowa, it seems like it is using Fuse & NTFS, so I don't think it's the classic WD + 10.9 mess, but extra WD tools & drivers can still break things MtTran.
MrTran, if you must use unsupported disk formats on your Mac you must also consider actually paying the developers that made the trial software.
It's probably a good idea to follow the developers removal instructions, reboot & then install one tool at a time.
MacFuse, FuseOSX, NTFS-3G are all likley to confict if you run older versions so you need to be sure you are using the latest version. I can't remeber which one depends on the other, so you will need to read the manuals.
When the disk is readable copy the data to another disk. You could probably do this from a Linux distro or Windows if OS X won't do it.
If you insist on only using the trial versions you will need to reinstall Mac OS, copy data off this disk & reformat it.
Is there any good reason for not using the Mac HFS extended format?

When it starts setting up the trial, it says "trying to connect to server" and will not go any farther in the process. I have left it for multiple hours, yet it never works. I need help!!

I already stated the problem above, but I am able to download the file. Yet, when I try to begin the setup it says "trying to connect to server" and does not do anything else. I need help to finish the set-up!

Download trial photoshop are you on a managed network? Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve connection errors.

I get "can't get email-fail to connect to server" msg constantly when I am connected and getting mail . Have to click ok.

I just started getting two messages on my IPad and IPhone I can't get rid if .
1. " can't get email - connection to server failed " when I am connected and getting email . Have to click ok .
2. " pass word required " when it is not, have to cancel this constantly .

Hello John,
this problem could probably be caused by a Firefox extension.
To make sure that no extension is causing the problems,
start Firefox in Safe Mode by following the instructions in the [[Safe Mode]] article.
Kind regards,
Tobbi
Firefox Support Volunteer

I cannot receive emails keep getting connection to server failure on my iPad

I cannot receive emails on my iPad. Keep getting pop up connection to server failure. What can I do?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

When trying to get email, says "cannot connect to server"

set up email at store, everything was fine. then clicked mail and says "cannot connect to server", yet I can use safari, etc. deleted and re-added the email account

that mean your email server is having problems or unavailable at the moment. Contact them.

Trying to access emails,message reads,connection to server failed.

trying to retrieve emails I get a message saying connection
to server failed,have tried resetting and deleting and reinstalling but still get same message.

Okay, I found the answer. I had hacked the domain.xml for this some time ago (this task has been off and on a lot) and forgotten.
I found the tsom_oes reference in there and removed it. Now it deploys.
Hopefully this helps someone else some day... probably not though, eh?

Automatically Connects to Server on login

When we log in to the Student account of some of our school MacBooks they automatically go to the 'Authenticate to Kerberos' box you would normally see after having clicked 'Connect' in 'Connect to Server'. They are trying to log in as particular students. Does anyone know how we can stop this?

1. If the problem occurs with a particular user each time you log in no matter which Mac-book, he most likely has a link to the server in his start-up items.
2. If it happens on a Group of units that are on the same "Computer List" or the Users are all members of the same login group, You most likely have an auto mount setting in WGM.
3. The only other place to look that I can think of is a Login hook that may have been setup, but that seems out of the realm of what you describing.

Cannot get email says cant connect to server

cant get email cant connect to server i got an iphone 4 tried to transfer info but mail wont work

If you encounter problem only on outgoing mail, than maybe I can help, I did face this issue sometime ago, outgoing server for Wi-fi & Cellular using different server, for Wi-fi, the setting should be the same as what you set for your PC, for Cellular, you need to contact your mobile service provider for the outgoing server setting, this should solve the problem as iPhone & iPad allow to have multiple setting

Connecting to server at login -- different subnet

Here's my situation. I have a ethernet LAN with IP addresses 192.168.0.xxx. I have added a wireless router/bridge withg IP addresses 192.168.2.xx.
I have a Mac Mini at 192.168.0.103 and an iMac at 192.168.2.2.
I can connect to the MacMini from the iMac using the "connect to server" option.
If I drag the Volume into the Login section of Account options it does not automatically connect. Instead, I have to do this manually.
Any ideas how I can mount this volume automatically at login?
Many Thanks
Ian

mrsmittys wrote:
I'll give it a try tomorrow at school. The next question is where do I add this script to have work at login? It looks like I should be able to copy it to an appropriate place in the Guest directory?
don't even bother with adding anything to the guest directory. It will be promptly deleted on logout.
From your admin account make a Users Agent using [Lingon|http://lingon.sourceforge.net>. When creating it check the box to run it when somebody logs in. Make it run an application (you'll have to make one) that mounts the server. You can use the automator to make that app as others suggested but I would use Apple Script.
The Script should look something like this:
set UN to do shell script "whoami"
if UN is "Guest" then
--this is to make sure the script only does something if Guest is logged in
mount volume "afp:10.1.1.21/path/to/share/"
end if
You'll have to modify the afp part -I'm still confused about how you want it to work.
Thanks, that looks like the script that I need, and you are completely correct about not needing the username:password syntax. (assuming it works)
Thanks for the suggestion about adding a launchd. You guys ROCK!!
Message was edited by: mrsmittys

Iphone 4 issue - yahoo email can't connect to server on 3G

I find my email not updating in 3G...i get Connection to Server cannot be found or some such thing.

I reset my network connections and that did the trick.

Connecting to server at login (newbie)

I am trying to setup accounts for teachers at our school that would allow them to login in to a local account, but automatically allow them to connect to the server to get at their documents. The reason for this is to bypass the necessity of the teachers to wait for the slowness of the login process, and to not have them need to manually enter in the connect to server, or apple+k command (trust me, it is easier without that!). Ideally, I would like to have that available on these options occur on the Guest account.
Thanks for any help!!

mrsmittys wrote:
I'll give it a try tomorrow at school. The next question is where do I add this script to have work at login? It looks like I should be able to copy it to an appropriate place in the Guest directory?
don't even bother with adding anything to the guest directory. It will be promptly deleted on logout.
From your admin account make a Users Agent using [Lingon|http://lingon.sourceforge.net>. When creating it check the box to run it when somebody logs in. Make it run an application (you'll have to make one) that mounts the server. You can use the automator to make that app as others suggested but I would use Apple Script.
The Script should look something like this:
set UN to do shell script "whoami"
if UN is "Guest" then
--this is to make sure the script only does something if Guest is logged in
mount volume "afp:10.1.1.21/path/to/share/"
end if
You'll have to modify the afp part -I'm still confused about how you want it to work.
Thanks, that looks like the script that I need, and you are completely correct about not needing the username:password syntax. (assuming it works)
Thanks for the suggestion about adding a launchd. You guys ROCK!!
Message was edited by: mrsmittys

Email security Q: Connection to server succeeded; login not required

Similar Messages

Maybe you are looking for