Email sending and email general problems

I am using the latest iPhone software version but these problems have been an issue for a while.
Firstly, I can only send an email whilst connected with my Wi Fi on. If I try and send without there is an error message saying '...the outgoing server "smtp.me.com" failed. My .mac account is set as my Primary server and I have an ISP account also. I have checked my Mail settings and some of the servers were not active so I have turned them all on and still can't send Mail, other than when connected with Wi Fi. How do you change the order of the email accounts on your iPhone do you have to do that in Mail o your computer then sync with iPhone?
Secondly, when I receive Mail on my iPhone it comes in ok but if I read it by selecting it it then sometimes doesn't show up in Mail on my computer this has become very annoying because I then have to forward any Mail from my iPhone back to my MBP.
My ISP email account is a POP account and my .mac is an IMAP

HI and Welcome to Apple Discussions..
Try rebuilding the mailbox.
From the Mac Mail Menu Bar, click Mailbox / Rebuild.
Takes a few minutes to run.
If that doesn't help, go to Mail/Preferences. Make not of the preferences under each tab then Quit Mail and locate this file.
~/Library/Preferences. Move that .plist file to the Trash and restart your Mac.
Carolyn
Message was edited by: Carolyn Samit

Similar Messages

  • HT1277 I set up a new folder for an email sender and now my emails are not able to use the rules that I set up.  What can I do to enable them again.

    I set up a new folder for an email sender and now my emails are not able to use the rules that I set up.  What can I do to enable them again.

    I don't seem to be able to copy a rule, but, this is how one rulel displays.
    Name of Rule is Richard Cryar.
    If any of the following conditions are met:
    From contains rcryar@auduboncapital
    Move message to Richard Cryar mailbox
    Not only does this rule not work, but all emails are going into the new box I created and not to the inbox.

  • How can I transfer my email accounts and emails from my old macbook pro with ML to my new macbook pro with ML

    How can I transfer my email accounts and emails from my old macbook pro with ML to my new macbook pro with ML

    Do you have your system backed up to Time Machine? If so, you can open your user Library and copy your Mail folder from Time Machine to your Desktop on your new machine; then copy THAT folder to your new machine's user Library.
    To get to your user Library, open Finder and Go and press the Option key. Library will show up. Click on it to get into your user Library. Now go into Time Machine and you should see your user Library for Time Machine. Restore the Mail folder to your Desktop.

  • I have the iPhone 4s.  I set up my email account and emails come in but I can't retrieve them.

    I have the iPhone 4s.  I set up my email account and emails come in but I cant retrieve them.

    Hi,
    In Messages or iChat go to the App Menu > Preferences > Accounts
    On the left is the list of  Accounts that are set up.
    Everyone gets Bonjour (Although by default it is not Active).
    Highlight the Bonjour Account
    On the right there is a Box that says "Enable this Account" which probably has a tick in it.
    Select it to remove the tick.
    This will turn Off the Bonjour Account.
    The List may also contain any @me.com name you have set up.
    This can be used in Messages as the ID for iMessages
    It is also a Valid AIM screen Name.
    It would helps if we knew which version of iChat and the OS you are using as there are some changes that occur
    An iCloud @me.com name will not work in iChat 5 or earlier due to the checks Apple has in iChat 6 (and Messages) which iChat 5 does not do.
    To also work as a Valid Screen Name the password for your @Me.com name has to be 16 characters or less (AIM server limit)
    9:49 PM      Wednesday; October 17, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT1277 Entourage 2008. All email acounts and emails had gone.

    I'm using Entourage 2008. version 12.0.0(071130). last night we setup email accounts. I had 4 email accounts. we setup one of 4 accounts that is exchange account. we only changed mail exchange server. this morning when we opened computer, all email acounts and emails had gone. how to get them back? Please help!

    Russ,
    Could be that the Property List file has gotten corrupted. Try the following:
    Close Mail
    Move the file com.apple.Mail.plist from folder <home>/Library/Preferences to the Desktop
    Re-start Mail
    Mail will behave as if it is a new installation so create your primary account.
    Create any other accounts you have in the normal manner via Mail Preferences.
    Your Messages are stored in the folder <home>/Library/Mail/Mailboxes and whatever structure you had in terms of folders and subfolders under the Mail window sidebar heading of "ON MY MAC" should be there.
    If Mail has not already found those messages as a result of you re-creating all your email accounts then you can import them using the following method:
    Close Mail
    Drag the folder <home>/Library/Mail/Mailboxes to the desktop
    Launch Mail
    Click File then Import Mailboxes
    Click Mail for Mac OS X
    Click Continue
    Select the folder you moved to the desktop
    Click Choose
    Click Continue
    Chris

  • Blackberry email send and receive problem

    Personal e-mail sent from PC, PC and Blackberry also can receive the e-mail. When i sent from Blackberry, PC can receive the e-mail but Blackberry can't receive the e-mail 

    Hi again,
    OK...so just to see if I understand correctly:
    kendalfung wrote:
     1. My Setting is own email server forward personal email to BB account. 
    You have your own personal email system (POP, IMAP, something) that is not a public (e.g., GMail, Yahoo, HotMail, etc.) email system, but it does face the internet. You have, on that server, some rules that are forwarding certain emails to a "BB account"...I'm not sure what "BB account" that specifically is. Is that an @carrier or @RIM email account?
    kendalfung wrote:
     2. PC using outlook/OE sent to personal email account, BB and PC also can receive the email.
    Using PC-based Outlook or Outlook Express, you are sending (as "TO") to that same email account hosted on your own personal email system. When you do that, both the BB and Outlook/OE receive the email just fine (I am assuming the PC via POP to your personal email system; the BB, by virtue of your server-based forwarding rule, though it is still undefined as to if you mean the @Carrier or @RIM BB email account that I mentioned above).
    kendalfung wrote:
     3. BB sent to personal email, PC can receive the email but BB can't receive the email 
    When you create a new email on your BB, sending "To" that email account hosted on your own personal email system, the Email never arrives to your BB but it arrives on your PC/Outlook/OE just fine.
    If all of that is correct, it would seem to me that the fault lies in the forwarding rule on your email server...it is forwarding emails that it receives by virtue of your Outlook/OE (whatever outbound email relay they are using) but it is not forwarding emails that arrive from the RIM SMTP gateways (which is where all outbound, from the BB, emails come from...the RIM SMTP gateways, not your own).
    kendalfung wrote:
    My setting is working before.
    Before what? What changed?
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Hello need some help on a few things with email sending and rec.

    I have had my bb for a while but am only now really trying to utilize it for more.  I am able to access my yahoo and gmail accounts on it and sync.  However when I tried to import my address book from sbc or tried to add the blackberry email I have run into problems.  It will let me send an email on the bb using the bb email address however I have no idea where it ends up on the desktop though.  I can't send out anything on the outlook from either account.    I am very frustrated to say the least.  The only reason I am wanting to get the bb email set up as there are thousands of items on the outlook that tell you don't remove from the outbox.  Hope that some of this makes sense.  Thanks  Carla 
    I have a curve 8310 
    Message Edited by CarlaVM on 09-12-2009 08:52 PM

    Welcome to the forums CarlaVM
    I am a little confused by your post. Could you please clarify a little better.
    If I understand correctly, you have added yahoo and gmail accounts to the blackberry so that it receives email's from those accounts on to your phone.
    What is "sbc" that you are trying to import your address book from? And expand on why you can't add the "blackberry email" (is this the email that says [email protected]?)
    If you send email using your blackberry account ([email protected]) the sent email  is only stored on your phone (and nowhere else). I would send emails using either your yahoo or gmail email account so that it will save a copy in your email accounts as a backup.
    I don't understand what you mean by sending from outlook? What does this have to do with the phone?
    Take a look at this section of the forums for tips and tricks: http://na.blackberry.com/eng/support/blackberry101/#tab_tab_curve
    I am a little confused by your wording so if you can clarify further I'm sure I, or somebody else, will be able to help you further.
    Cheers
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • How to send and email with Multiple attachments

    Hi,
    I'm new to java and been trying to send weekly newsletters to subscribers,
    however the news letters have images that need to be attached to the emails, but i am unsure how to do this.
    As the moment i have a to files.
    writeemail.jsp
    this will have a form where the user will write out there email, and then have a submit message.
    sendemail.jsp
    this script retreves what the user has writen and then calls a class, to send the email
    please help

    http://java.sun.com/products/javamail/FAQ.html#sendmpr

  • Customise EOP Spam Notification End-User email address and email content

    Hi
    We are using EOP with our on-premise Exchange 2010 environment. 
    I am rolling out EOP and have the following two (simple) questions, regarding the Spam Notification email that is sent to end-users:
    1. Can we edit the email address that sends the Quarantine notification email? Or must the email come from [email protected]
    2. Can we customise the Quarantine email that is sent to the End-user (with our company logo)?
    From my experience and understanding, I believe the answer for both is NO, but my customer is adamant that editing the email address and customising the email content is possible.. Please advise.
    Thanks
    Ron

    The safelist/blocklist is tied to one email address. However, if you enable email alias consolidation done by LDAP and leveraging off of the Active Directory, then you may be able to achieve what you want.
    The safelist/blocklist comes into play with respect to anti-spam results. The email alias consolidation should occur much earlier.
    So, see if you can get email alias consolidation using LDAP/Active Directory working and it should address the safelist/blocklist thing.

  • Sending and receiving sms problem

    Hi,
    I try to send and receive message with this command;
    MessageConnection conn = (MessageConnection) Connector.open("sms://" + addr);
    When I run this command, I meet this error:
    java.lang.UnsatisfiedLinkError: isNetworkMonitorActive
         at javax.microedition.io.Connector.isNetworkMonitorActive(Native Method)
         at javax.microedition.io.Connector.<clinit>(Connector.java:142)
         at com.sezo.smsyeni.Sms.sendText(Sms.java:36)
         at com.sezo.smsyeni.Sms.main(Sms.java:24)
    I want to send sms over IR with my phone. (Sony Ericsson K500i)
    Is it necessary to use any API?
    What should I do?
    Thanks.

    Hi Friends,
    I'm new in the J2ME domain. I did try to send SMS from my desktop application to mobile. But at runtime I'm getting the following error:-
    ++++++++++++++++++++++++++++++++++++++++++
    java.lang.UnsatisfiedLinkError: isNetworkMonitorActive
    at javax.microedition.io.Connector.isNetworkMonitorActive(Native Method)
    at javax.microedition.io.Connector.<clinit>(Connector.java:142)
    at MessageSender.main(MessageSender.java:12)
    +++++++++++++++++++++++++++++++++++++++++++++++
    Please let me know what all setup/configuration/dll are required to resolve the problem. Appreciate your input.
    Thanks and Regards,
    -AshokM

  • Seemingly random email sending and receiving problems

    I am visiting some friends and have been able to access their Wifi no problem--surfing, streaming and getting some emails easily. 
    Today I noticed, after a few hours of doing some work and personal emailing, that some of my emails have not been going out.  I use Yahoo and Exchange for personal and work, respectively.
    I see one email sitting in the iPad mail app's "outbox" and all the others are nowhere to be found.  When I check on l
    Iine to my account via the Yahoo or Exchange websites, I can't find these sent messages in the "sent" folder. 
    At the same time, I saw that, in my Exchange account, I've received a bunch of emails but they have not appeared in the iPad2's Mail app.
    This is an odd glitch, and I wonder if there could be a problem with how I've set up ths particular wifi access.   I am going to go check this out at a Starbucks or some other place with free Wifi that I've used before, but if I could get any hints as to what settings to check, that would help me do some troubleshooting, I'd really appreciate it.
    Dan

    Hi Russa:
    That is usually caused by an ISP having server issues. I do not know of anything in Mail that would delay mail. I suggest you contact your ISP to see if they will acknowledge problems.
    Barry

  • Email Sends And Receives, But No Delivery

    When I send email to a local user ('localuser'), it is received into the system, but never gets delivered.  I know this because I can capture incoming message from the 'spool' directory.
    Initially, the troubleshooting environment was within Server and it was suggested that DNS was the problem.  I felt that this was outside the scope of the root problem (but, maybe not).  I tried to resolve by correcting my DNS.  No luck.  Now, I'm trying to simplify the issue by removing Server from the equation.  My results are exactly the same as with Server.      
    I appreciate all help and advice.
    Thanks
    System: OSX 10.8.5
    From a terminal (as root)
    Commands and data entry:
        mail -s "Test Message" -F localuser
        test
    Mail.log:
    Jul 21 06:21:56 hostname.com postfix/pickup[12459]: 978FE7F1899: uid=0 from=<root>
    Jul 21 06:21:56 hostname.com postfix/cleanup[12594]: 978FE7F1899: message-id=<[email protected]>
    Jul 21 06:21:56 hostname.com postfix/qmgr[12460]: 978FE7F1899: from=<[email protected]>, size=383, nrcpt=1 (queue active)
    Jul 21 06:21:56 hostname.com postfix/pipe[12599]: 978FE7F1899: to=<[email protected]>, orig_to=<localuser>, relay=dovecot, delay=0.04, delays=0.01/0/0/0.03, dsn=2.0.0, status=sent (delivered via dovecot service)
    Jul 21 06:21:56 hostname.com postfix/qmgr[12460]: 978FE7F1899: removed
    From a terminal (as localuser)
    mail
    No mail for localuser

    Before I got further down the path, my drive crashed.  Once back up, I set up a mail server using standard Mountain Lion, without OSX Server (Much simpler than the convolution that Server adds).
    I did initially have the same problem though.  And, I believe that it was due to the main.cf entry of:
          relayhost = $mydomain
    Once commented out, messages were delivered to the client app.
    -- close the loop.

  • SMTP email sending and executable

    Hi all !
    I have some problems related to my executable I talked about in another message. I decided to create another thread to that question. Hope I'm doing it right !
    As I told you my code is working perfectly. But I got some problems when I created an executable. You guys helped me solve them but now I got another problem:
    I'm using SMTP to send a message notification after a certain condition is met (please see the attached VI).   The "normal " code is working well but the executable, not!
    When I run the executable it's continually sending emails. It should normally send just one time! Can somebody tell me  what's going wrong with my executable?
    Best regards
    Kabanga
    Attachments:
    Email_and_Executable.vi ‏21 KB

    Hi Mike,
    thanks for your help.
    I just put the "OK" button for explanation purpuse. In fact the "ok" is done programatically each time I receive a defined byte from the serial port (please see the attached VI).
    You helped me solve the problem related to byte reception and case-structure "driving"  last week. I'm very sorry not having mentioned it to you know.
    Is it possible in that case to use the event-structure?
    Best regards
    Kabanga
    Attachments:
    Email_and_Executable_modified.vi ‏20 KB

  • I tried to send and email file that was too large and now my email is not working. the draft continue to repopulate over and over

    I need help with email. I composed a new mail with an attachment that was too large. I never sent it, but it locked my mail up and continues to repopulate the draft.

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • Can you chose multiple contacs at once, before you send and email? there must be a way

    Please someone help me with these issue. I made my mum buy and ipad instead of a personal PC, promising it would make her life easier. She only use this device to send mails to hers friends. She its complaining that every time she has to send a mail, she spends 5 minutes choosing the contacts she want, one by one (instead of leting her chose the ones he like in a row and the clik add just ONE time)
    Thanks for your time

    There are a few things you can do. The first is hit reply all to an old email (assuming that this is the same group of friends each time) and just delete the content a type a new email. This way you don't have to type in any addresses. The second is that you could create distribution lists using the Notes app. This way you can create multiple groups of friends for different emails. What you would do is create a new note and at the top write Group A or whatever you want to name it. Then type all of the email addresses of the people you want to email. Save that and when you want to email those people go to the notes app and double tap on a word to bring up the copy/paste slider. Copy all the email addresses (make sure when you type them you separate them the same way the Mail app does) and paste them into the To: field of the message. This can be done for multiple groups of friends by writing different notes. If each email is to a completely different set of people, I am afraid not much can be done.

Maybe you are looking for

  • Possible to get SID of current session when not logged on as SYS

    I would like to get teh SID of my current session, but access to V$MYSTAT is restricted: conn user/******@DB SQL> desc v$mystat ERROR: ORA-04043: object "SYS"."V_$MYSTAT" does not exist SQL> conn sys/******@DB  as sysdba Connected. SQL> desc v$mystat

  • How to use a Global database link

    i try to create a global database link through two databases MZFB et MZF14952. the MZFB database is installed under the machine MZFXPDESK the MZF14952 database is installed under another machine SUPPORT1 i execute this code CREATE DATABASE LINK dbl_1

  • Allow or block links to the Internet in PDFs

    We have an issue on one computer with a Security Block message when clicking a link on a PDF opened in a browser IE, linking to a PDF on a network file share. The message dialog has no ALLOW button only HELP and OK.  On other computers the link opens

  • Alias for Cursor ROWS  in DBMS_XMLGEN

    Gurus, I have following sample function to generate XML content ========================================== create or replace function getxmldata return clob is mysql DBMS_XMLGEN.ctxHandle; begin mysql := DBMS_XMLGEN.newContext(' select cursor(select

  • Mac App Store troubles

    So earlier today I bought iMovie 11 for my Macbook and installed it and it had a problem where the video window was always black no matter what type of video or photo you tried to play. So I decided to clean install of Mac OS X. I finished the instal