Email server offline when online
Hi
Can anyone help me with an email send issue? My email will not send because the smtp server keeps saying it's OFFLINE, but everything I check says that it is ONLINE.
I was using email from this same server through the same connection earlier today, and suddenly... I am getting the "Cannot send message using smtp.mac server." When I look at the servers to choose from they are ALL listing as OFFLINE. But when I check anything and everything else, I am told everything is online.
I can access the internet, I can RECEIVE email, I just can't send!
HELP!!!
(I am on OS 10.5.8, by the way and am a shifting MobileMe-to-iCloud user... though that may change soon...)
Hi,
Very hard to say actually because it depends on the Retry situation on your email client/agent. I would resend the email.
Just my 2 cents.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
I have an iPhone and use Roadrunner as my email server. When I open RR it gives me 4 choices, inbox, drafts, sent and trash. I would like to add saved, how can I do this. I contacted RR and they said it is an Apple problem to solve.
Roadrunner is POP email, and the feature you are looking for
is a function of IMAP email. Roadrunner has not announced
any plans to make IMAP available. If this is important to you,
get a gmail account (which can be setup as IMAP) and configure
your Roadrunner account to automatically forward emails to the
gmail account. -
This problem began before upgrading to Mavericks but remains unchanged. My email server constantly responds "Mail was unable to connect to server “mail.speakeasy.net” using SSL on port 955. Verify that this server supports SSL and that your account settings are correct." My settings have been the same for several years and tech support on the server end confirms that they are correct, and on their web site, all email comes and goes as it should. I have an AOL account that works, a Road Runner account that works, and a Gmail account that sometimes goes offline but which can be coaxed back into service. But my two speakeasy accounts refuse to connect.
Any suggestions where I should look next?Anon22176 wrote:
I've checked Apple forums. Nothing there. I am not convinced it is an Apple or MAC problem. I've never had this problem before. Also,
multiple Comcast users started having this problem all of a sudden today.
Are you overseas this week? Several non-US IP addresses are trying to send as your account. It's possible your account was compromised. Try calling the Customer Security Assurance Department at (888) 565-4329 for help with resetting your password, if this doesn't work for you:
http://customer.comcast.com/help-and-support/account/changing-or-resetting-your-password/
-
Upgraded to Yosemite outgoing email server offline BT
Since upgrading to Yosemite this weekend Mac Mail outgoing server is showing as offline. Using BT email account. Able to receive e-mails but cannot send. Have checked all settings and tried removing/ adding both e-mail accounts several times. Still same problem.
My daughter still able to send BT e-mails from BT accounts on her PC, my husband still able to send email via BT account using iPhone 4s which has not had recent upgrade. Also able to send email if I log directly into BT mail and use their system which could indicate Apple Mail/ Yosemite problem with BT account?
Any help, advice or comments would be much appreciated.
Many thanks
DebbieI upgraded to Yosemite over a week ago and all was fine until yesterday when I started getting identical symptoms to those outlined by others.
Would it be possible for you (or someone else) to explain in more detail exactly how you deleted all your SMTP servers.
I have several listed . . . some are bt and some yahoo. -
Contact showing offline when online
Hello, I using (newest) Skype on my computer, and one time i used it too on Windows Phone... First time when i get trouble to other see im online but no i will logout all devices online.. Sooo/showplacesand/remotelogout .So, its helped, but anyway, yesterday i taked a sleep my computer... After a 20 minutes ago has powersupply stopped work so Network card etc has stops working... (so PC fully shuted down). But anyway, its will be STILL VISIBLE like as im Online??? Why??? Actually result from /showplacesYou have 1 online endpoints:
{68xxx553-9xxxx-xxxx-xxxx-dxxxxxxxxxxxx} 'WIN-A4U9Cxxxxxx' (Windows Skype) What to do? Thankstechfreak wrote:
senderbobo wrote:
Hi , i have the same problem. Im from Bulgaria and met a girl , which i fell in love with,shes from Australia,but everytime , either when send message or wait a while,her skype shows its offline and i know it isnt.When i restart skype everything is ok.Please help with solution.
I have the same problem with someone who is only 20 minutes away! Like senderbobo I have to quit Skype and restart it before it admits that my contact is on line. I tried deleting the eas.db file, as suggested in http://community.skype.com/t5/Live-Messenger/No-Messenger-contacts-showing-in-Skype/m-p/1365173/high... and that didn't make a difference. Everything was working fine until a couple of months ago.
Bring back MSN chat. -
Running I tunes offline when online
I dislike the fact that Itunes doesn't give me the option of turning off its Internet access. When my systems on, it immediatly becomes a part of my sattelite server's lan. The only way at the moment that I can use Itunes offline is to turn my Sattelite's modem off, which I don't really want to do.
If somebody can please tell me how I can stop Itunes from continually wanting access to the internet, then please can they tell me.
Have a nice day, Cardanic.Click on START , RUN and enter REGEDIT
That will open the registry Editor.. BE CAREFUL.. if you don't know what you're doing, you can seriously mess up your computer.
go to the top directory and search (CTRL-F) for anything APPLE or iTunes. Then just delete every string that it finds. Keep searching until it can not find anything else. that should completely remove any traces of iTunes from your computer. -
How can I convince T'bird to delete email when online in an IMAP account?
When online, deleting email Thunderbird does not automaticly move the message to the Trash folder as selected in "Account Settings:Server Settings:Server Settings:When I delete a message: Move it to this folder: 'Trash'." However, this does work automaticly when Thunderbird is offline.
I'm fairly sure the constant failure, with a notice, of the program to place a sent email into the 'Sent' folder is related. When I mark a messate as junk it is marked junk but not moved to the 'Junk' folder as set in the account settings....
The accounts do have a Trash, Junk and Sent folder on account provider's server.
- JimJim, I said right click the account in the folder (that is the list on the far left of your screen) when you select subscribe you get a dialog that looks like the attached image. That is "what the server has" So you checking the other dialog for mismatches. You will also need to look in Server settings for your deleted folder setting. For some reason it is not with the others.
If you click on the advanced button in Synchronization and storage, you will get the same "subscribe" dialog if the other instructions just don't cut it. -
Mail handling while email server is offline
When the server is offline and there's email sent to an account on the server, it waits until the server is back online and then the email gets through. Which is pretty awesome. But how long can the server be offline before the email gets bounced back to the sender? (I assume it won't wait around forever, if there's a long outage.) Is the amount of time some kind of internet standard, or does it vary; if the latter, where does it come from?
Hi Angie33327,
If you are having issues sending email from Mail on your iMac, you may find the troubleshooting steps outlined in the following article helpful:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Regards,
- Brenden -
Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?
Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?
-
Clq status shows quorum server offline eventhough it is online
Hi,
I am facing a problem in my cluster that when I bring all the three nodes in a cluster (2 app-nodes and one quorum server) at almost the same time, the clq status on any of the cluster nodes is showing quorum server as offline. when I do the clqs show on the quorum server, i ge the below output.
clqs show
=== Quorum Server on port 9000 ===
--- Cluster beacluster (id 0x4916625B) Reservation ---
Node ID: 1
Reservation key: 0x4916625b00000001
--- Cluster beacluster (id 0x4916625B) Registrations ---
Node ID: 1
Registration key: 0x4916625b00000001
Node ID: 2
Registration key: 0x4916625b00000002
this is cluster 3.2
any inputs will be appreciated
Thaks in advance
Ushas SymonHi, this is solaris cluster 3.2u1..
I got the quorum server online by
# clq status
--- Quorum Votes by Device ---
Device Name Present Possible Status
rac1 1 1 Offline
# clq add -t quorum_server -p qshost=xxxxxxxxxx -p port 9001 rac2
# clq status
--- Quorum Votes by Device ---
Device Name Present Possible Status
rac1 1 1 Online
rac2 1 1 Online
By just adding one another QS both the QS status came online !!!!!!!!!!!!
no IDEA, what is happening...
anyways I have deleted the second QS by #clq remove rac2 and #clq reset
now it is fine..
Thanking you all
Ushas Symon -
HP AIO Remote shows wireless printer offline when it is online and can print to it.
HP AIO Remote installed on my Windows 8.1 Yoga 2 shows my wireless printer is offline, when it is online and I can print to it wirelessly. How can I get it to recognize my wireless printer is online wirelessly? AIO Remote will only recognize the printer is online when the USB in connected to the Yoga 2.
Hi rpmcintyre,
Thank you for the additional information. I apologize for misunderstanding. I just want to confirm that the HP AiO app that you downloaded onto your Windows 8.1 computer is showing your printer as offline when you are able to print wirelessly to the printer.
I have two different documents for you. The first one is How to Use the HP AiO Remote App for Windows 8. It has a FAQ section at the bottom of the document with trouble shooting steps. I have also included the Supported Printers for the HP Scan and Capture App.
If the above documents don’t assist you, would you please let me know which make/model/product number of HP printer that you have? How Do I Find My Model Number or Product Number?
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?
See my answer to your previous duplicate question. What happened when you tried my answers?
LN -
When trying to email pictures from i photo, a message comes up that "email server didn't recognize your username/password combo" I'm not that savy, does anyone know how to fix this?? I did change my Apple password, but that shouldn't effect it should it??
thanks!!I get the same message.
-
I have the same username and password for my Apple account and iCloud. My main email server is btinternet. When I try to share a photo by sending an email by iCloud I get a message "Server doesn't recognize username/password combination". Do I need to login to iCloud with my btinternet password?
Seeing others with same problem I have gone into iPhoto>Preferences>Accounts and changed password to btinternet password. It worked. Thanks.
-
When attempting to send email photos on my iPhoto 11, I keep getting the message " THE EMAIL SERVER DIDN'T RECOGNIZE YOUR USERNAME/PASSWORD COMBINATION". However, I already have this info in my preferences/account section. What is the problem and
how can it be fixed???The usual fix: Delete the account from your Preferences and Re-Enter it.
Maybe you are looking for
-
59000XT 128-VTD TV-Out problem with video.
I have the MSI GeForce 5900XT-VTD128. I´m using the TV-Out funktion and I clone my primary desktop. It all works fine to show the desktop on my TV. But when I try to play a Quicktime Movie in Quicktime it dosen´t work. It is the same problem with Win
-
Duplicate library within Aperture 3
I'm a novice user whose not gonna know all the relevant information the knowledgeable and helpful folks will need to thoroughly answer my question, but here's the best I can do. Perhaps with specific questions, I'll be able to provide more informati
-
OAM and MS Active Directory Integration on Non-Windows Server envrionment
I will start by saying that I am dealing with a heterogeneous environment here where multiple systems are run by different levels of management. Our Oracle systems chose to go all *nix (Oracle Solaris and Red Hat Linux) and hence we do not have a sin
-
SAP_ESS 633 Software Component Import failed - NWDI CMS
Hi, We are configuring the NWDI for ESS, no problem with check-in tab From the Check-in tab, I had checkedin the Dependent Software componets & SAP_ESS 633 Software Component. But in the Development tab, Import getting the error "Import Failed". SAP
-
How to get each column position in JTable?
I want some buttons appear at the top of each column. For example, Button1 Button2 Button3 | column1 | column2 | column3 | |--------------------------------------------| ...But button1,2 and 3 should be at the top of the column1, 2 and 3. So th