Email showing Phone Numbers and Address for a Split Second then Disappears

Hello - I have the I-Phone 4 and am having difficulty with receiving all parts of emails for my business. On incoming emails I am able to see the numbers for only a split second before they disappear. However, if I click on where the number should be (as the screen is white in that area), it will ask if I would like to call the number.
Any ideas for fixing this issue?
Thanks!

Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones  trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

Similar Messages

  • How to get i cloud to show phone numbers and not emails

    how to get i cloud to show phone numbers and not emails

    In the contacts app the information is as you have entered it.  You can include the added information you want for the contacts.  Open a contact and tap edit and add the information you want there and then tap done.  It soulds to me like Facebook friends who have email addresses only have been merged into your contacts

  • TS3297 I can't download apps on my phone after entering my password it shows downloading for a split second, then goes back to available. Works fine on of

    G'day I can't download or update apps on my phone ( on computer is fine ). After entering password it shows downloading for a split second then goes back to being available. It's a new recent change & I can't see anything wrong with my settings on the phone

    Howdy Aussiebloke17,
    It might be worth attempting a restart of the iPhone, and then a reset, should that not resolve the issue.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the iPhone is still not properly downloading apps, you may want to try restoring the iPhone.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    All the best,
    Allen

  • When I turn on my iPhone 4S the apple logo pops up for a split second then the screen goes black but the phone itselfs boots up just fine???

    I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!

    Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones  trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

  • I have an Ipad 2, I recently downloaded IOS 7.0.4, now when I open up Safari to search the internet it will come up for a split second then dissapear and take me back to the home screen. So it wont even let me search for anything.

    So can anyone tell me how to fix this problem? I cant surf the web because as soon as I click on the Safari icon it will pop up for a split second then dissapear and take me to the Ipad homescreen. This happened when I downloaded the IOS 7.0.4.  I have the IPAD 2.

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

    I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite.  Please help!

    Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

  • Ipod touch will not turn on. Did a synch turned on. Then turned off.       and tried to restart. Apple logo came on screen for a few seconds then disappeared and cannot turn back on. This is a new replacement unit. only have had it 4 days.

    Tried powering on again after syn. Apple logo appeared for a few seconds then disappeared and now can not turn on. This is a replacement unit, only have had for 4 days

    Did you try to connect in recovery mode and restore "as new device", without using the latest backup afterwards? iPhone and iPod touch: Unable to restore and How to back up your data and set up as a new device

  • ITunes doesn't open and agreement page opens for a split second then leaves

    Hi well i posted this thread a while back but never got a response soo I though maybe if I post a new one you would see me, sorry if im a burden but I really need the help. Okay well i just uninstalled iTunes because I already had problems with it but now, I just got my iPod and installed the cd on my computer.Then I click on iTunes and the agreement page comes up for one split second then exits out.Well heres all my Inof.I have Norton Anti Virus 2005, Windows XP, Microsoft Firewall (off), i have service pack 2 for microsoft and all the necessary updates are downloaded. I didnt download the optional upgrades only the ones that said were needed. please help me.
    -Danny =]
    Sony Vaio   Windows XP   i like cs and itunes and warcraft ALOT =)

    HI danny!
    sorry you got no response last time. PPLE post and post and post and before you know it, your thread is buried six feet deep under other threads.
    Ok, so you described your problem to me. I think its a particular malware program thats going around and it causes exactly what you described. BUT, because you do have Nortan 2005, its QUITE possible that is the culprit. Norton and itunes dont play nice together. Norton thinks its a malicious program and blocks it from opening. Its a pain, i know, but First, try turning OFF norton before you launch iTunes and report back to me about what happens.
    Cheers,
    Rachyl

  • Firefox 3.6.12 won't open under WinXP. Have uninstalled/reinstalled several times. When I start the program (including safe mode) I see a Firefox process appear for about 3 seconds, then disappear. Run full scan with Norton with no malware discovered.

    I've used Firefox for years with no problems. I've not installed any new extensions or programs between the time it worked great and when the problem began.
    I click to start FF (shortcut, directly on program file, etc.) and I get an hourglass for a couple of seconds like it's starting, then nada. As mentioned, I see FF show up as a process in Task Manager for about 3 seconds, then disappear.
    Solutions I've tried include: Uninstall/reinstall on the same drive and a separate drive, registry cleanup/optimization w/Norton Utilities, full scan for malware/viruses with Norton, stopping some autostartup programs that were installed and in use while FF was running fine.

    I've used Firefox for years with no problems. I've not installed any new extensions or programs between the time it worked great and when the problem began.
    I click to start FF (shortcut, directly on program file, etc.) and I get an hourglass for a couple of seconds like it's starting, then nada. As mentioned, I see FF show up as a process in Task Manager for about 3 seconds, then disappear.
    Solutions I've tried include: Uninstall/reinstall on the same drive and a separate drive, registry cleanup/optimization w/Norton Utilities, full scan for malware/viruses with Norton, stopping some autostartup programs that were installed and in use while FF was running fine.

  • TS4000 Tasks Disappear on Outlook 2007 (Windows 7) when added on iOS 6 device.  They appear for a few seconds, then disappear.

    I just installed iCloud for Windows on my Windows 7 PC, running Outlook 2007 and IE9.  I have been dealing with an annoying issue for years with my iOS 6 devices, where I enter a reminder (which is sync'd to my MS Exchange server), and the reminder doesn't show up in Outlook until the day after the due date.  I thought installing the iCloud control panel might help this issue.  Now the task shows up for a few seconds, then disappears (from Outlook Today screen).  It shows up in the task list if I click it, but not in my Today view, which is what I use to track my tasks.  Any ideas why this disappearance may be occurring?

    I had this same thing happen to me.  I was using my brand new iphone 5 (texting and listening to music through the speakers) when it flashed the apple logo, stopped my music and brought me to the lock screen. 

  • Iphone 6 stuck on Logo screen with flash of screen for a split second then back to logo screen :(

    I purchase my Iphone 6 Roughly a month ago. Last night it died so I plugged it in and this morning it is stuck on the Apple logo screen and flashes to a red screen for a split second then back to the Applelogo screen. I have not done any updates since purchase. I have tried the power and home buttons together and simotaneously with no result PLEASE HELP!!!

    Hi ptina78,
    As someone who uses and depends on my iPhone on a daily basis, I know I would be upset if my phone did not start up properly. Let's see if we can get you back up and running. If your iPhone is not completing its startup sequence and you continute to see the Apple logo on the display, you may need to reinstall the iOS operating system on the iPhone. This article tells how -
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Specifically -
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Why I get double phone numbers and addresses but not notes within a contact when I sync iphone 4S with Outlook 2007?

    I get double phone numbers, double addresses, but not double notes, when I sync iPhne 4S with Outlook 2007. How can I prevent it from happening?

    Yes, I removed iCloud add-on from Outlook; and uninstalled iCloud.  I then re-installed, and sync would not work (no tab for sync in Outlook either). There was no improvement.
    However, since reading your post, I have just tried signing out of icloud control panel and signing in again....and now all si working as it should.  Weird!!
    Thanks for your assistance.

  • ITouch shows up on iTunes for a few seconds, then disappears. (Wireless Sync)

    When I try syncing my iTouch with iTunes with wireless, the iPod only shows up for a few seconds, than disappears.
    Does anyone else have a similar problem, or any solutions?

    I would go easy on the abbreviations, though. Try the suggestions here:
    * https://support.mozilla.org/en-US/kb/Firefox%20crashes

  • All of my Itunes songs keeps going in and out for a split second

    Every time I am using Itunes lately on my Imac the songs go in and out or pause for a split second.  I do not understand why this is happening - it happens on old songs and new songs that I have purchased.
    PLEASE HELP!!!

    The linki LéonieDF gave for the rebuild workflow was for iPhoto 8 (09) and earlier.  For iPhoto 11 this is the workflow to follow:
    Apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Is it possible to see my phone numbers and addresses that I backed up in the blackberry desktop manager

    I know it may be a silly question -- but I finally was able to download the blackberry desktop manager and then back up all the data from my blackberry to my computer via the desktop manager.  For my peace of mind, I would like to see some of this data (addresses and phone numbers) just to insure that I did the back up correctly.  Is this possible?
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    The file that contains the backup data is designed as proprietery to the Backup/Restore process. It is not designed to be read independently. There are some third party readers, can't recall the names (Amber-something-or-other?), but if you search for an application that can read an IPD file, you might find what you are looking for.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Document level Authorization

    Hi Gurus Can user(Owner) define authorization for the roles/user to change / display particular document. As i know we  can control the users by status level, but our client doesn't want to check any values. They just want to restrict the users to ch

  • Can j2ee applications run on windows xp

    i have a problem i am unable to run j2ee applications on windows xp help me..............

  • Installed leopard 10.6.7 Photoshop CS3 will not see my canon scanner in the file/import

    I have been using CS3 for years, with my faithfull canon 5600F used the import twain feature worked great, installed leopard 10.6.7: now my twain plug in does not show in the import menu: I read through many forums & posts: can't find a solution. I d

  • URL Pattern problem

    Hi I deployed an ear which has a web module with contextroot '/test'. It has a jsp whose url-pattern is mapped to /testjsp. From a html form i'm calling this jsp and the action attribute is /test/testjsp. But the error is resource not found /test/ser

  • How to erase pic from i cluod?

    how to erase pic from i cluod?