Email (SMTP) call from Toolkit, need to add files to Builder?

Labview 6.1 using Internet Tool kit with SMTP call to send email. Do I need to add files to Application Builder for distribution?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Thanks, I was not sure what file it wanted.
I still have a problem. The distributed application is not reading internet.ini for the SMTP configuration. Where does it want this file or how do I specify where it is?
Matt
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Similar Messages

How do I convert emails to PDF from Outlook to make a file on the PC?

how do I convert emails to PDF from Outlook to make a file on the PC

It is always tough for anyone when we need to save our emails into one file for future reference. You could either do it manually or can use a simple tool to Convert all your messages into one pdf file . This Single pdf file can be used if we need to read any past email. you can easily convert oulook to pdf in no time. If you are converting several email messages, you can either save them as separate files with initial layout fully intact or combine them into one big PDF document.

Submit SharePoint app to Office app store, this app need to add file to hosted web style library

I want to submit SharePoint app to Office app store, I road the "Validation policies for the apps submitted to the Office Store : "http://msdn.microsoft.com/en-us/library/office/jj220035(v=office.15)
and the Point 5.9 mention:
"Your app for SharePoint cannot request full-control permission. Apps for SharePoint that request full-control permissions are not accepted in the Office Store."
I need to know if this point applied on site collection, web or List. because my app need to add files to hosted web, and it seem there is bug with "write permission" then I should use "full-control permission" on list.
any suggested solution will highly appreciated
thank you

Below configuration will be enough for adding files. Yes 'Full control' can't be placed on Office store.
<AppPermissionRequests>
<AppPermissionRequest Scope="http://sharepoint/content/sitecollection/web" Right="Write"/>
<AppPermissionRequest Scope="http://sharepoint/content/sitecollection/web/list" Right="Write"/>
</AppPermissionRequests>
See this : App permissions in SharePoint 2013 (See video)
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Mail from RVADOR01 need to add body of the mail

Hi Experts,
How to add mail body for the below case?please look
I am using output tupe Zmail attached to Program ZRVADOR01 and script form ZRVORDER01.
The Program ZRVADOR01 and the script ZRVORDER01are copied from standard prog RVADOR01 and standard script RVORDER01.
And this output type is attached to VA02.
In the Zprogram i could able to give mail subject in OPEN_FORM function module in OPTIONS parameter.
And i am sending to the exterid which is outlook.
For giving the email id i have added some code from the note .357137 before calling the OPEN_FORM function module in the program..
mail is coming with subject line and attachment of script document .
But the only thing needed is , add body text for the mail.
How can i do this?
Regards
Ramakrishna

Hi Rama, I am trying to do the same and noticed that your comments/question appears as "ANSWERED" at the top of the thread.
Were you able to accomplish this?
Jacob

Calling report from forms :- need to disable file menu in report previewer

Hi all,
I am using report 6i and forms 6i
I am invoking report from forms
if report_status='N' then I want to disable the file menu in report previewer
Is it possible to disable and enable file menu in report previewer
Please help
Thanks
:8}

i got way

Backed up iTunes folder, need to add files to new installation. How to?

Hi all,
Basically my Mac HD had some problems which forced me to backup by copying the entire iTunes folder as found in username/Library/ and save to disk.
I am now back up and running with a fresh installation of Leopard and would like to re-add all of my music and other data, as it was on my previous install.
Which of the files out of the iTunes folder do I need to copy over, and will it be a smooth transition?
Any help is much appreciated.

Move the entire iTunes folder back into the Music folder of your home folder. If you erased the hard disk and backed up the iTunes folder in the Library folder but not the copy in the Music folder, your iTunes library has been erased and needs to be reimported or redownloaded.
(34953)

Can I make a database call from within my rss.xml file?

I have a rss.xml file for my web site which works just fine, but has to be manually updated each time my web site blog is updated. Is it possible to insert a sql query in my rss.xml file so it can pull the updated info automatically from my mysql db?
I know the rss.xml file will have to be renamed with a .php extension, will it still work?

I think this is what you are looking for[http://dev.mysql.com/doc/refman/5.1/en/xml-functions.html]
They are called XML functions that you can set up in an .php file to export the updated file name as rss.xml, though I think it will overwrite anything already in the .xml file.
If you care to dabble, you may already be a master, but there are some cool rss tutorials here [http://www.w3schools.com/rss/]
Hope this helps!

How to add external call from Report Painter

Hi experts,
I'm working on a report painter, and I need to do an external call, from the generated code.
add something like this    PERFORM Z_CALCULO_IMPORTE_COMPENSADO(ZCASS_FFMRBCS)
                                                                                USING CUR-TAB
Is there any way to do it without an SSCR key?
Thanks in advance

HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID :    des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar

How can I block 'no caller id' calls from contacting me?

Over the last couple of days someone has got a hold of my number, and has been calling me with a private number. I want to know if there is a way I can block all calls on my phone that come from a private 'no caller ID' number, and only allow ones that have a caller ID through. I have tried contacting my service provider Telstra which they said the most they can do is put me on the do not call register (which doesn't help my situation at all, as the person isn't a telemarketer). Does anyone have any ideas about how to fix my problem?
Thanks.
(I have an iPhone 5 iOS 7.1.1 and my service provider is Telstra Australia)

There is no Third Party App you can load onto an iPhone that will be allowed to take over your iPhone's Phone without jailbreaking your device (which cannot be discussed here nor would I ever recommend doing it).
One feature you can use is the Do Not Disturb feature. You can set it to allow calls from your Favorites then add all of your people to your favorites, but that is not quite what you are asking for.

SMTP error from remote mail service

I am receiving a error that states"SMTP error from remote mail service" This is my work e-mail that is a out look e-mail service--but was put on my laptop in mozilla. If I test send e-mails to my gmail, aol and the work e-mail the work e-mail goes through (on the mozilla) but I get the error report for the gmail and aol test.

''Matt [[#answer-672468|said]]''
<blockquote>
what is the complete error message please.
</blockquote>
Hi Matt--thank you for reaching out to assist--here is the full error message I receive when I attempt to send emails--
SMTP error from remote mail server after end of data:
host p3nlsmtpcp-v01.prod.phx3.gdg [72.167.191.78]:
552 5.2.0 bT641p03m3RZ6FL01 :: CPANEL :: Message rejected for spam or virus content ::
Please include this entire message when contacting support ::
v=2.1 cv=Yecz5mhf c=1 sm=1 tr=0 p=dXr4a0FlAAAA:8 a=9P+wmFvZGoNcfX5LD2dIAQ==:117 a=9P+wmFvZGoNcfX5LD2dIAQ==:17 a=TZb1taSUAAAA:8 a=xSRs65CQCjkA:10 a=IkcTkHD0fZMA:10 a=o1OHuDzbAAAA:8 a=YNv0rlydsVwA:10 a=AK46IGkTethYI5b8t1AA:9 a=QEXdDO2ut3YA:10 a=RBqHpAr1aNgA:10 a=SZlYXZE0WA8A:10 a=POQKUN4lQn8A:10 a=5LQJebhDX5EA:10 a=lWHhIcKi20EA:10 a=AP_QpuyW5RgA:10 a=_ZmE1jEfA50A:10 a=fVc70mvjwYYA:10 a=BfRt8DTvoOQA:10 ::
100.00

Mailer object error message "SMTP: invalid from address. SMTP error 530 5.7.0 Must issue a STARTTLS command first. d5sm35857280yhl.19".

I am trying to send an email from Lookout V6.6 using the Mailer object. I have an email address setup through GMAIL and have verified it works. Also, Lookout Mailer object is able to verify GMAIL server. I get the following error message when trying to send the email: "SMTP: invalid from address. SMTP error 530 5.7.0 Must issue a STARTTLS command first. d5sm35857280yhl.19". Anyone know what is causing this?

Another method is to use a SMTP relayer, we have deployed them in the past.
http://www.hmailserver.com/index.php?page=welcome
Mike
Forshock - Consult.Develop.Solve.

HT201229 I just got a call from someone whom I had blocked. How did this happen?

With iOS 7 I created a contact title "Spam." I then blocked this contact. Anytime I get a call from a telemarketer, I add the number to this contact.
Just now, I got a call on my phone that came up from my spam contact. I thought this was impossible?
I have 8 different numbers assigned to the contact.
Anyone have any insight? Do I have to create an entry/contact for each number individually? If so, that would really suck and would fill up my address book with unwanted contacts.
This is an iPhone 5C on Verizon Version 7.1

You should report to the Do Not Call register and also your carrier.

Best approach for RFC call from Adapter module

What is the best approach for making a RFC call from a <b>reciever</b> file adapter module?
1. JCo
2. Is it possible to make use of MappingLookupAPI classes to achieve this or those run in the mapping runtime environment only?
3. Any other way?
Has anybody ever tried this? Any pointers????
Regards,
Amol

Hi ,
The JCo lookup is internally the same as the Jco call. the only difference being you are not hardcoding the system related data in the code. So its easier to maintain during transportation.
Also the JCO lookup code is more readable.
Regards
Vijaya

[CRM 5.0] How to add file attachements to created ticket (transaction)

Hi!
I have to do engancement and need to add file attachements to tickets (transaction) documents. I made ticket creation but I don't know how to add file attachements to it.
Could someone help? Mayby some function module name?
Thanks for response!
KK

class cl_crm_documents has a number of methods which should be of use to you.
create_with_table will allow the file to be created from data held in a table and attached to the activity.
create_with_File will allow you to create with reference to an existing file.
here is an example of the use of create_with_table.
form create_document using    p_bus_obj type sibflporb
                               p_properties type sdokproptys
                               p_file_access type sdokfilacis
                               p_file_contents type sdokcntbins
                      changing p_error type skwf_error.
call method cl_crm_documents=>create_with_table
   exporting
      business_object     = p_bus_obj
      properties          = p_properties
*                properties_attr     =
             file_access_info    = p_file_access
*                file_content_ascii =
      file_content_binary = p_file_contents
*                raw_mode            =
*                text_as_stream      =
*                parent_folder       =
*                package_id          =
    importing
*                loio                =
*                phio                =
      error               = p_error.
endform.                    " CREATE_DOCUMENT
p_bus_obj-typeid needs to be set with guid of transaction
p_bus_obj-catid = 'BO'.

How delete 'Other SMTP Servers' from email account?

In trying to figure out how to SEND email using my iPhone 3G I changed some port settings, according to Comcast. In the end doing this added a bunch of 'Other SMTP Servers.' I've deleted one of my email accounts and re-set it up, to no avail. The INCOMING port number keeps setting up its own number and I cannot change it to 110, as it should be, so I cannot receive email on theis account. Everytime I change it to 110 it automatically changes itself back to other numbers (587, 99?) when I exit and try to retrieve email. I've synced my iPhone with my pc...didn't work.
So, I need to know how to change my INCOMING port setting to 110 and keep it that way, delete multiple 'Other SMTP Servers' listed within any of my email accounts, and also how do I SEND email while outside the home (I can send email fine when I'm home using my wireless router)?

Same problem. Every time I add a new account its smtp server details are added to the list of available servers, even if exactly the same details already exist in the list. I now have three identical smtp servers listed.
Discovered this when having smtp connection refused problems after adding three different email domain addresses that I use with the same service provider - the first one is ok, the other two always fail smtp connection. The smtp details for all accounts are exactly the same, which works perfectly well when using Mail on my MacPro machine, but not it appears on my iPhone.
I can delete the troublesome accounts on my iPhone (have not yet figured out why all three work fine together on my MacPro machine but not on the iPhone) but, there does not seem to be a way of deleting duplicated or unwanted smtp information from the iPhone. Regarding ports, I use port 25 for sending on all 3 accounts, but I did notice that the iPhone setup automatically chose 587, which although legit does not appear to work.
Any suggestions?

Email (SMTP) call from Toolkit, need to add files to Builder?

Similar Messages

Maybe you are looking for