Email SMTP issues

Just upgrade to the Q5 from a Blackerry 8900.
I cannot "send"email when external from home office as the email account is setup to use SMTP server cogeco.ca. To resolve this Rogers recommends that I change SMTP to rogerswirelessdata.com. This solved the problem however I cannot use the rogerswirelessdata SMTP when I am back at my home office and the WiFI is on the Q5. Rogers would suggest that I turn off the WiFi on the device when I am at home.
I have an iPad and within their Email settings they allow you to setup multiple SMTP. Allowing you to seamlessly travel with the device without having to update the SMTP depending on your current location.
Rogers and Blackberry informed me that this is new email technology in comparison to the 8900. I view it as a step backwards. Has anyone else contacted their service providers and/or Blackberry about this issue.
Does anyone have any advice. Your feedback would be greatly appreciated,

Hello,
This is a known issue, refer:
KB33824 How to integrate a Cogeco email on a BlackBerry PlayBook or BlackBerry 10 smartphone
It is Cogeco that is the true root cause of this, based on the restrictions that they impose. The desire you have for multiple and automatic SMTP server shifting is a nice idea...but merely that...it is not something implemented in BB10. It is also not equatable to BBOS as those used the BB/RIM SMTP servers, not the email providers...BB10 does not use BIS.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Since updating my macbook air with OS X mavericks i can't send emails smtp account failed my email host is 123reg

since updating my macbook air with OS X mavericks i can't send emails smtp account failed my email host is 123reg any ideas how to sort it out?

I am having the same issue with Media Temple Email.
My problem in more detail is:
Adding my Media Temple Hosted domain email to a desktop service on my Macbook Air.
I have tried this on both Mac Mail and Thunderbird.
I add the account manually and have checked, double checked, triple checked the server addresss and also the user name and password and they are correct.
I have altered the ports from being default to custom and have tried both SSL and non SSL and still it is unable to connect to the SMTP server.
IMAP inbox is working as I recieve mails but can not send them.
I have chatted to Media Temple and they say it must be something to do with the hardware of the MacBook Air which to start with I disagreed with but I have since tried adding the email to my Mac Mini and it works fine.
I am assuming their is an issue in the MacBook Air with the SMTP ports and I would really appreciate some advice on how to fix this as I don't want to use Webmail for ever.
Thanks in Advance

Email notification issue in some schemas

Hi,
My problem is almost identical as here DBMS_SCHEDULER send email notification issue
One privileged scheduler user - user1 receive email notifications while two another (user2, user3) no.
More plot is below i know 'what' resolve the problem but don't know how to do it :-)
I want to execute code below on user3 schema, we tried this successfully on user2 (code executed directly on schema with temporary sys.dbms_aq access) so he receive his notifications.
Problem is - we do not have direct access to second account (user3) how to execute this code as user3 ?
declare
reginfo1    sys.aq$_reg_info;
reginfolist sys.aq$_reg_info_list;
begin
reginfo1    := sys.aq$_reg_info('SYS.SCHEDULER$_EVENT_QUEUE:SCHED$_AGT2$_X',
                                  1,
                                  'plsql://SYS.SCHEDULER$_JOB_EVENT_HANDLER',
                                  null);
reginfolist := sys.aq$_reg_info_list(reginfo1);
dbms_aq.register(reginfolist, 1);
end;
Already tried create procedure on user3 and execute immediate annonymous block but it still register with USER# 1 not 3 in DBA_QUEUE_SUBSCRIBERS.
More detailed plot:
Jobs for user2 and user3 was created by user1, so JOB_CREATOR was user1 but OWNER was user2 or user3.
We started with notifications configuration witch was ended with error on both user2 and user3 accounts:
ORA-24093: AQ agent SCHED$_AGT2$_XX not granted privileges of database user1
W get rid wit this using
dbms_aqadm.enable_db_access(SCHED$_AGT2$_2, user1);
dbms_aqadm.enable_db_access(SCHED$_AGT2$_3, user1);
So user1 get privilege on agents for user2 and user3
I believe error was already there because DBMS_SCHEDULER.add_job_email_notification is more automatic it probably registered subscriber that belongs to user2 and user3 with wrong USER# ID that belongs to user1.
Database is 11.2.0.3

it doesn't work because notifications are set from user1 account so USER# is still 1 even when I removed record first.
This is my aproach based on Ask Tom: On Becoming Others, Limits, and Restoration
>sqlplus user1
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
SQL> grant execute on sys.dbms_aq to user1;
Grant succeeded.
SQL> alter user user3 grant connect through user1;
User altered.
SQL> connect user1[user3]
Enter password:
Connected.
SQL> create or replace procedure sched_not_add_q as
2    reginfo1    sys.aq$_reg_info;
3    reginfolist sys.aq$_reg_info_list;
4 begin
5    reginfo1    := sys.aq$_reg_info('SYS.SCHEDULER$_EVENT_QUEUE:SCHED$_AGT2$_3',
6                                    1,
7                                    'plsql://SYS.SCHEDULER$_JOB_EVENT_HANDLER',
8                                    null);
9    reginfolist := sys.aq$_reg_info_list(reginfo1);
10    dbms_aq.register(reginfolist, 1);
11 end;
12 /
Procedure created.
SQL> exec sched_not_add_q;
PL/SQL procedure successfully completed.
SQL> drop procedure sched_not_add_q;
Procedure dropped.
SQL> connect user1
Connected.
SQL> revoke execute on sys.dbms_aq from user3;
Revoke succeeded.
SQL> alter user user3 revoke connect through user1;
User altered.
SQL> exit;
>
So it works now.

Email password issues

Why am i having email password issues? This is the email from [email protected] "Your account (email) could not be authenticated. If you have recently changed your email password, please enter the most current password in settings to continue receiving emails. You can enter the password 100 times a day and still will not receive emails.
Anyone have an answer?

Delete and re-add the account. I just had the same thing happen, and that fixed it. I think it was some error on Verizon's end.

I changed my ID due to an email accessibility issue and I lost access to all my purchased music for the last few years. Been browsing through the support area and it seems like everyone is saying I will have to rebuy everything. Is this really true?

I changed my ID due to an email accessibility issue and I lost access to all my purchased music for the last few years. Been browsing through the support area and it seems like everyone is saying I will have to rebuy everything. Is this really true?
Apple has to be more user friendly than to let something like this happen, right?

Did you change the ID, or did you create a new Apple ID? If you had simply changed the ID then what I suggested above should work as the ID itself is the same (even though the name of the ID - the address - has changed).
However if you created a new ID, logged in with that, and purchased items on it, then you have two separate IDs each with purchased associated with them. You say that you can't log in to the original account with the 'alternate' email - have you tried logging in with the original email address? It doesn't matter if it doesn't actually work to receive mail, as far as logging in is concerned it's just a text string.

Email sync issues

I'm having email sync issues & can't find a solution that fixes my problem. Tried everything I've been able to find, including ensuring Sync function is enabled in multiple locations, disabling then reenabling sync features, powering my phone off/on, even resetting the battery. Received the NK1 update on 11 Dec. Not sure if that's when the problems started or not, as I've been busy, but that's seems about the time things stopped sync'ing properly. Am using the email app that comes with the phone (an S4 mini), and have 3 email accounts, cox.net, and 2 aol accts. The cox & 1 of the aol accts won't sync, but the other aol acct does sync. The one that is working I have set to not auto sync, & the manual sync works. Not so on the other two ... the sync app says they are sync'd, but the email app says they haven't been sync'd in like 2-3 days, even tho I've sync'd them multiple times today. Get a continually circling busy / working symbol. Get new email on desktop computer without issues. After a few days, the other two accts will sync up.

CSForest,
From time-to-time I have had this issue with the default email app. Have you checked to see that the app is synched? When it happens with my S4, there is a message at the bottom of the screen saying the app isn't synched. Try this: pull down the status bar and click on the icon at the far right. This will open all the functions available on the status bar. Make sure 'Synch' is on. For some reason, this function on my phone gets turned off without me doing it. KarenC suggested using another email app. As a backup, I use K-9 Mail. I really like this app.
I hope this helps.

ICloud OS X email setup issue

Hi need some help with an iCloud email setup issue that doesn’t seem to have been covered by other posts or the Apple help factsheets.
Used my old mac.com Apple ID to set up an iCloud account which now shows as having my iMac as a linked device. To use iCloud Mail was prompted to create a new email address which I could do by turning on Mail in iCloud settings.
I signed into iCloud via my iMac and having deselected default options to use iCloud for Contacts etc arrived at the account page which has the various options on the RHS and my mac.com ID info on the left.
Ticked the Mail option on the RHS was asked to “choose an iCloud email address” underneath the box where you enter the chosen email address was a note saying “you cannot change your email address after creating it”. When I tried to set up the new iCloud email address got a prompt saying “you cannot change your email address after creating it”.
Help!

You need to know Comcast's settings for incoming and outgoing server when setting up your OSX Mail app. The info should be somewhere on Comcast's help web page.
lenn

Android 2.2 update coming in early September- Will it address the email notification issues??

The upcoming Android 2.2 update for Droid X. Will this update address the email notifications issues?? I don't have a corporate email account, but use my Droid X for my personal business. I love this phone but the email is annoying. The emails are not coming through quick enough, I don't get notified when new email arrives. I have to do a refresh to lear that I have new emails in my inbox.
I want like to know if the upcoming 2.2 update will address these issues for personal email like aol, yahoo etc. I know they mentioned something about exchange servers being faster. This is a disappointment for me, I thought I have push email with Droid X but not really. Can Verizon comment on this?
Thanks,

I did all those, ie. set my email config to push email, battery on performance mode, check my outgoing and incoming servers and ports. All are corect settings, I even configured all my aol accounts with gmail settings to see if that would work but still not getting push emails. I even did a factory reset. I know this is an issue because I also checked Motorola support forums, a lot people were experiencing what I am going except that I think most them have corporate email and exchange issues.
I don't know whether this could be addressed with the upcoming 2.2 update not just for corporate but personal emails as well, VERIZON ? Motorola??
Thanks

TS2756 Tethering. iphone5 email smtp server issue

I have an wifi ipad 2 and an iphone 5 on EE 4G network. I have configured the iphone 5 as a wifi hotspot, I can connect my ipad, browse the web receive emails etc. the problem comes when I want to send emails, it keeps telling me there is a network error. I know this is not true, I have a feeling it has something to do with SMTP outgoing server, possibly the port number? The incoming servier is port 110 and I have outgoing set at port 587 but think it could be some other port or some other issue. Would appreciate any help anyone can shed on this issue
Richard

My problem has been resolved.
Regarding that, probably you should check with SMTP server admin.
For me, the shcedule was success but didn't receive mail. I think the SMTP server admins cleared any firewall filters.
Not sure. Please check with your SMTP server admin.
Regards
Gowtham

IOS4 SMTP email setup issues

IOS4 woes.... Had the "spectacular" experience of updating our Gen2 Itouch to IOS4. Email to our Verizon email account used to work flawlessly. I've sunk about 4 hours and finally got the unit to send email {receiving was never an issue} by creating a second SMTP email account, but outbound emails take 15 minutes to send {when they used to take only 10 seconds, great improvement Apple....}. How do I shut off the DEFAULT Apple / Yahoo account and use the secondary email server as the PRIMARY account?
thank you for your help....Arrrrg {I'm a pirate!}

I was having the same problem with outbound email not working after upgrading my 3GS to OS4.0. The only solution that I found was to disable my existing mail accounts and create new ones. Go to Settings->Mail. Select the mail accounts that don't work properly and set them to Account->OFF. Then select Add Account from the Settings->Mail screen and create a new one. I set two mail accounts that weren't sending mail to OFF, then recreated them with Add Account. They both work perfectly fine now.

Z10 SMTP Email Sending Issues

Hello
Could you let me know if you have a workaround for the issue with not being able to send SMTP emails from the new Blackberry Z10 on build 10.0.10.82
The message I get is 'Protocol Layer was unable to send a message'
There is an ever growing discussion on the message boards….
http://forums.crackberry.com/blackberry-z10-f254/unable-send-some-e-mails-protocol-layer-unable-send.../
http://forums.crackberry.com/blackberry-z10-f254/heads-up-email-bug-recent-z10-os-versions-779341/
http://forums.crackberry.com/blackberry-z10-f254/cant-send-e-mail-via-smtp-z10-785848/
I have tried the following;
Using a different port for smtp (currently using 465 with SSL)
Tried turning SSL off and using port 25
Tried using a local smtp from my service provider (Etisalat raher than auth.smtp.1and1.co.uk)
Using a different email
None of the above work.
Any assistance much appreciated...

6hugo9 wrote:
Yes please -- it's annoying that March-2013 update has introduced such a crippling facility.
I have IMAP and Exchange accounts setup, and all of my email accounts suffer this problem every day ..
Quite dibilitating - and not good when this is my primary communication device... I dont look forward to having to resort to an Android based phone if this doesnt get fixed fairly soon
Regards
@6hugo9 - I think that you are talking about two seperate issues, unless you are also using 1&1 as your email provider.
@jjclarke - The 1&1 issue looks like it is being looked into, there is a KB article here. That said, the more of you that call into your Carrier's Blackberry support teams and report the issue, the more likely you are to get it resolved. You may even find that there is already a resolution in the pipeline waiting for Carrier's to OK the release of the updated software?
@6hugo9 - you are listing a number of seperate issues in your linked threads. There is a bug that shows up on some servers over SMTP that the z10 is botching the HTML encoding on the emails (fortunately my server are not having this issue, knock on wood!), also others are having issues with ports being blocked (port 25 is quite frequently blocked by ISPs for anti-spam reasons) which would stop email from being sent.. as you wouldn't be able to connect to your server.
Regardless, the best way to get to the bottom of that issue is also to call your carrier's Blackberry support team.. that will get the issue escalated on the development side. The "more the merrier", so to speak.
A little birdie told me that when that SMTP encoding bug was introduced, the Blackberry support teams were swamped with calls.. So one has to assume that the devs were then working hard on resolving the issue. I imagine that we are all now waiting on our carriers for the fix to be sent through after they get done with the Carrier's "OS tests" that are always delaying our software updates.
Best bet is always to call in and get a resolution, especially for extremely important issues like this one.
-: DrewRead :-
Can't find an app on Blackberry World yet? Tweet the developer and ask when they will #GetWithBB10 !!
"Like it" if you like it.

SMTP issue, cant send emails. Please help!

Hi everyone-
So like everyone else, i assume, i wanted the push email for my work. I set up a .me account, forwarded my work emails over, and then set up my work email (bluetie) as my smtp server as i wanted to have the emails sent from that account. For some reason, it just wont work- i can not send any emails! It just waits and waits and eventually says "one or more email recipients not valid" or just puts the email in my outbox (and never sends it).
I have turned off wifi, as i heard this could be a problem. I have also changed the port number of the smtp to what bluetie recommended. But still no dice.
Frustrating! Is there any kind soul that could help me?
Thanks a lot.

Thanks a lot for the response.
Yes, i am able to send emails from the att smtp server, but i really wanted to send them from my work (bluetie) smtp so they would show my work email addy.
customer service at bluetie said they dont block the smtp server as far as he knew.
any other thoughts?

After upgrade to 10.10, can't send email (SMTP cert. error). On previous version running on another machine, can still send find. This new version is missing the "Usual Ports" checkbox option. Can someone please help?

I just upgraded to 10.10. On the mail program, one of my accounts is having an issue sending email. I am getting the following error message:
The certificate for this server is invalid.
Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
But on another machine running Mavericks, I can still continue to send email. The same is try from my iPhone 5S.
On that machine running Mavericks the SMTP is configured as SSL and for "Usual Ports" (25, 465, 587) but THIS OPTION IS MISSING ON THE NEW VERSION. On the new version I have tried configuring the port to 25 and then 465 and 587 with no success. I have used the Network Utility to see if my provider is blocking me -- it is not. I have no third-party software on this machine (anti virus). I can receive email fine. On the new Yosemitie Mail there are new checkbox options of Automatically check my settings and Allow unsecure connections. I tried to uncheck SSL for SMTP but then it says it cannot send securely my passowrd and i need to check the option "Allow to send unsecurely". I did that but the same error message keeps appearing. So I have tried nearly everything I have been able to, all to no avail. Please can somebody help?

Thanks for your reply. Yes, it is a POP account. Incoming mail is fine. My port for incoming is also 110. But the outgoing port should be 587 (or 24, 465 and 587 as on Mavericks' "Usual Ports" option). I am using the same configuration across three different devices and only the machine running Yosemite is having issues. I notice in the new version of Mail there is no longer the "Usual Ports" option. I am not sure this is the culprit or not. But the fact is no matter how I configure it, it will not send mail for these particular servers. I have multiple clients and only one is affected, meaning I can send email from other email addresses (different hosting contracts) on Yosemite but on this one particular one I cannot.

Cannot send email SMTP to yahoo business email

i have yahoo business email, with 3 email accounts. iphone 3g will happily read the emails of the one account i want it to, but i cannot successfully reply or create new emails, send fails.
i tried to create a gmail account and use its smtp server. this worked for the gmail account, but still cannot send mail to the yahoo account.
tried to delete the outbound email server, but seems to be a bug in the interface - no matter what changes are made in the smtp detail, (even 'delete server') the smtp server for yahoo wil not delete. accordiing to some posts i read, supposedly if main smtp server is deleted, others in chain will pick up. this is not happening, when outbound function fails, it does not try with other smtp servers. yet send does work from gmail account!
what is the correct setting for yahoo? why cant i disable yahoo's standard smtp server as preprogrammed into iphone?

I have the very same issue. Can't delete or modify the "primary" account. All attempts to send result in the same, "Cannot Send Mail" message. As yet, I have heard nothing and the latest update ... 2.0.1 ... had no affects. Let me know if you find the solution.

Local domain, IIS Hosting and SMTP issues.

I have a local domain on Windows server 2012 with dns, dhcp, iis and smtp. (Yes, I am aware of the dangers of these combinations) it is for learning purposes only and not my main pc.
My local domain is willow.run and I am hosting a website, the domain for that is machinerylubricant.com I have IIS 8 installed (6.0 also for smtp)
My original issue was getting IIS to send an email to localhost through a php script for a contact form hosted on the website. I finally got to where it appears to be sending the contact form info to my drop folder but I ahve no idea how to get that .EML
file to actually forward to gmail account or even outlook on my computer/server.
In the email file (.eml in drop folder) it says "To: *******@gmail.com" as it is supposed to but that email is not making it to the specified gmail account. Also no error messages in the ph logs or the log files for smtp. How would I go about setting
up a email program to work on the lan with the acual www domain name I own?
I am learning everything at once basically, windows server, coding, protocols etc. Please bare with me.

Rather than answer your specific question, how about I give you the best way to achieve what you're looking for?
For inbound messages, you want to use the "aliasdetourhost" keyword. Check the documentation for how this is set up.
For outbound messages, you want to use the "alternate conversion channel"
When used together, this will achieve what you're looking for, without the looping that you have generated....
The alternate conversion channel was written up here:
http://ims.balius.com/resources/downloads/files/AlternateConversion.pdf

Email SMTP issues

Similar Messages

Maybe you are looking for