Email sound/vibrate problem

Ever since upgrading to 2.01, I've noticed that when an email is detected, the phone only vibrates and fails to sound the usual tone, though in settings tone is on, as is vibrate. Anyone have any fixes, please?

All fixed: I did a forced quit and restart

Similar Messages

HT1688 I have my phone right in front of me I5S and it's not on vibrate and It's intermintely not ringing, making the text sounds, or email sounds and it's settings are all fine. I took it to the AT&T store yesterday and there's nothing wrong with it

I have an I5S phone and it for some reason intermintely not ringing, no text sounds, or email sounds and the phone is not on vibrate or there hasn't been any setting changes other than I thought maybe I should down load the new 1OS7.04 to see if that corrects the problem and it didn't.

u have to touch your home butto slowly(don't push it).
and when your finger is wet or something like that your fingerprint wont work.
try to put your finger on the center of home button Because the side of your finger isn't work well.

How do I create a custom sound/vibration profile per app, SMS text, phone, or email contact?

I have a Verizon iPhone 4s recently upgraded to iOS 7. I'm an IT engineer who's on call and started a new job last week with a company that doesn't provide company phones like a blackberry. So now I get tons of company email alerts, text messages, and phone calls both private and for work. I always have my phone switched to vibrate to filter out the noise of generic emails/texts/phone calls, but I also need to be able to configure specific emails sent from our network monitoring servers, text messages from my teammates and alerting devices, as well as phone calls from our internal tech support to be sent with sound. Ideally I also need to be able to configure alert options in an "On-call" profile I can switch on so that I can configure alert repeats and the most annoying noise I can find so I don't sleep through network pages.. But I still want to be able to keep the default vibrate for everyone else and everything else.. How do I create a custom sound/vibration profile per app, SMS text, phone, or email contact? In blackberry's, you can easily create different profiles to switch back/forth and configure each app/text/phone option to either a sound option or vibrate. iPhone seems to be all vibrate or all sound, with little to no options to mix/match the two.. If Apple ever hopes to truly capture the enterprise market blackberry has, this is the most standard and essential feature on blackberries for IT professionals.. If I have to buy a third-party app for this, so be it. But I've been searching for hours and found nothing that creates customized sound/vibrate profiles for iPhone like this (minus jailbreaking your phone, but I shouldn't have to jailbreak a $699 "smartphone" for simple sound/vibrate/alert options like this..).

Yeah Appke wants to be like RIM (Blackberry) who is sinking fast and their devices will be door stops.
http://www.apple.com under support you can ask at their forum or you can call them. However if you call under ios7 support they may help you for free. But if not they will cost you $$$$
As far as I can tell with my iphone what you want to do is not possible. There are sites that tell you how to make different ringtones for the device but your choices to change sounds for email and text/sms messages are controlled unders sounds in the setting menu. Again the manual is on your phone and online if you need assistance changing sounds and ringtones.
Good Luck

No email sound notification

Hi all,
on my new iPhone 3G I have several email accounts set to check every 15 min. When the iPhone is in standby mode it does receive those new mails, which I can see on the Mail icon when I switch on, but I never hear a sound notification, although switched on.
Is this supposed to work like that?
Thanks

I have been having the same problem and even got Apple to replace the phone.
Same problem on the second phone.
But, everyone I know who has an iPhone, including my husband, has the email sound working fine.
Has anyone found the answer?
Also, a question: What type of email account is giving you the problem and what is the domain?

HT201401 When my ifone 4 is charging, I cannot hear text or emails sounds. I do hear call sounds. Is this normal

When my iphone4 is charging, text sounds and email sounds do not work. Only phonecall sounds. Is this normal?
Also when you go into settings, sounds, and what to change the default for texts and email you cannnot hear the sounds if the phone is plugged in.
As an example if i change the text tonne from bloom to bell, it makes a bell sound if it is not plugged in. But if it is plugged in, it makes no sound at all.
This doesn't seem like the way the phone should work.
It has the same problem with email sounds. They do not work when the phone is plugged in.
Call sounds work fine with and without charging.
Help.

Seems like your iPhone is sensing that it is Docked into a Dock system. Clean the iPhone charging port with a clean dry toothbrush and see if this fixes it.

Why doesn't outgoing email sound work?

A while back I had this same problem...the outgoing email sound didn't work. So I did this: Applications>Utilities>Audio Midi Setup>Built-in Output>Output> Changed the output to 2ch - 32bit Float (was originally: 2ch-24 bit integer). Then the sound worked fine. Today, once again, the same problem has recurred. Additionally, now when I increase or decrease the sound from the keyboard, there is no "bleeping" sound with each increase or decrease change. There is sound when I watch a video, etc. I went to Audio Midi Setup and tried changing back to 2ch-24 bit integer, but that didn't help. I did try rebooting with 2ch-32 bit Float as well as with 2ch-24bit integer...didn't help. Any suggestions?

You don't give us anything like enough data to go on. What is your operating system? Do you have a functioning iCloud account - i.e. are you signed in in System Preferences>iCloud?
Were you originally a MobileMe subscriber? If so, did you migrate to iCloud?
Was your email still working recently? Do you get any error messages? What happens when you try to use it?
Have you been using an @icloud.com address or an @me.com address?
(Please do not post your email address when answering.)

I need help with an email WiFi sending problem on my iPad 2

I’m having an email WiFi sending problem on my iPad 2     Model: MC774C/A; IOS VERSION: 6.1.3 (10B329).
While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca. The settings for this account are:         pop.bellaliant.net            and      smtp.bellaliant.net
I first noticed the problem about 3 weeks ago while travelling across the country (Canada). (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.) Prior to that everything worked well for a couple of years.
I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi. During the day, using my 3G account, all worked fine. I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house. I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at. I did that and the young technician got the iPad sending and receiving by changing the        smtp.bellaliant.net      to         mail.1xbell.ca
However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
I’m looking for any suggestions that might solve this annoying problem?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

My daughters have Iphones and both are registered to my email. The problem with that is that one get the others messages. I have to make one account for each their phones. How do I do that?

My daughters got Iphones a couple of years. I do not have an Apple-phone. I registered both phones on my email. The problem is that one of them get the others messages. I therefore need to make two different accounts for their apple-products. How do I do that?

On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so.

How do I get around the email Apple ID problem on iCloud?

My Primary Apple ID is not an email address. After following Apple's prompts on my iPhone after installing IOS5 I (and I regret this emmensely), created a new ID with my primary email, the same one that is the email linked to my other Apple ID. It allowed me to do this.
Since iCloud would be fairly unmanageable on my iPhone and Macs with 2 IDs, I'd like to figure out the best way to trick the system to merge all this mess into one account.
Here's my problem.
My primary Apple ID is a simple username.
The email for it is my primary email
The secondary Apple ID account I created for iCloud is that same email.
The email for it is that email.
What I want to do is change my primary Apple ID with the username to the primary email name, in order to make all my iTunes purchases synchable with iCloud.
I do know that Apple does not allow an ID to be cancelled, so I can't go this route to get rid of the current email one.
Dropbox? ;-)
TIA

I signed to iCloud using a [email protected] email address as the username. It's the same email address as my primary ID's email.
The problem is not buying apps or music using the iCloud ID, it's managing them later.
You'll end up with a big mess of apps and music all over the place. You won't be able to sync to iCloud all the music you have on your primary ID.
I made the mistake of buying an expensive app using the iCloud ID on my phone, only to not have it be able to sync to my computer, which uses my primary Apple ID. I had to go through Apple to have them void that purchase and buy it again using my primary Apple ID.
All my issues would have been avoided if Apple had allowed me sign up for iCloud using my current Apple ID.
It's because of their requirement that the ID username needs to be an email address.

E75 Email (Access Point problem)

Hi,
I've setup nokia email without any problem using my WiFi and it was synchronizing without a problem. Since then I've I'm unable to change the Access Point to my Mobile provider. I keep getting "Server not found", even though the server name is still properly configured (netac3.vie.hosting.com). Can anyone help?
Regards,
Nuno

Sorry when I wrote this was in Houston at the Continental Presidents club being yelled at... sorry
The problem still exists, with no solution found so far, can anyone help?

HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106

Email new password problem

Hi
I have recently had to change my BT email password because I got hacked.
I can log into my email online no problem with the new password. I've changed the password, in Windows Live Mail but it only works some of the time. Yesterday all emails were getting through, today it keeps asking for the password - and when I put the new one in it says its not correct.
I've run BT desktop help and it also says the password is not correct. (it is!!)
Any ideas?
Frances

I can see your posting now, its in my waiting folder. I have to arrange a trigger for posts with my name on, as there are far too many posts to wade through otherwise
This is an ongoing issue with POP3 access which is unlikely to be fixed, as Yahoo say that the sevice is working within acceptable limits.
Personally I use IMAP access via Thunderbird, and so do many others on this forum. That seems to work fine, perhaps you would like to try it as well as Windows live.
Instructions are on my website.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

The difference of sinad.vi between Sound & Vibration Toolkit and Singal Processing Toolkit

Hi, I'm confused with the the difference of sinad.vi between Sound & Vibration Toolkit and Singal Processing Toolkit.
When the input waveform is single tone, the output is almost the same, but raises much discrepancy while a certain distribution of the spectrum. Does the sinad.vi have some limitation to the input signal? Did I miss some setting of the terminals? Hope someone can give me some suggestion.
Attachments:
SINAD(Front).png ‏85 KB
SINAD(Block).png ‏77 KB

Hi, here's the subVI for the test! Hope someone can give me some suggestion.
Attachments:
SINAD.vi ‏96 KB

Force exponential window in sound&vibration toolkit

hello,
I work on shock acquisition and analysis. I would like to use a window "force exponential" before computing fft. But I don't find the vi to do it directly in sound&vibration toolkit and VI express toolkit.
So I try to do it by using the VI in signal processing toolkit (see the link picture please) but I lost the time data information (the VI uses array data and not dynamic data with time). how to recover the time data?
J F
Attachments:
exponential_window.jpg ‏131 KB
fft.jpg ‏171 KB

Bonjour,
Je ne suis pas sur d'avoir bien compris, vous désirez avoir le temps écoulé ? le temps où la mesure a été faite ? Pouvez vous me donnez plus de précisions svp. Ci-joins un vi en 8.5 qui pourra peut-être vous inspirer.
Cordialement,
Steve M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions
Attachments:
exp2.vi ‏84 KB

Can the email sound be changed in 1.1.1

Can the email sound be changed in 1.1.1?
I know you change ring tones and sms tones, but what about the email tone?

NO just ringtone, ringer and text messages

Email sound/vibrate problem

Similar Messages

Maybe you are looking for