Email status indicator R
What does a checkmark with a R indicator mean?
Thanks,
Rae
open the email and go to the top, there will be a line starting with "Message status". The content is the R (I don't remember what it is though)
The search box on top-right of this page is your true friend, and the public Knowledge Base too:
Similar Messages
-
Network Connectivity Status Indicator for IPv6 works wrong in Windows 7 and Windows 8
Hi Folks,
I am working on testing Network Connectivity Status Indicator for IPv6 in Windows 7 and 8.
Waht is "Network Connectivity Status Indicator(NCSI)" you can refer to https://technet.microsoft.com/en-us/library/ee126135%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
I found that even if Network Connectivity Status Indicator detect IPv6 connection to http://ipv6.msftncsi.com/ncsi.txt failed.
Windows IE still use IPv6 to connect to website first, rather than stop using IPv6 and to use IPv4.
It will cause IPv6 fallback to IPv4 problem, that's 21 secs and 7 secs delay for fallback in Windows 7 and 8.
Does anyone suffer the same problem?
Or someone know how this works?
Thanks!Hi Roger_Wang0214,
"Windows IE still use IPv6 to connect to website first, rather than stop using IPv6 and to use IPv4."
By default Windows prefers IPv6 over IPv4,we can manually configure the IPv4 prefer over IPv6 if it has result in any troubles.
Here is a link for reference :
Resolving Internet connectivity issues after World IPv6 Launch (June 6, 2012)
https://support.microsoft.com/en-us/kb/2533454
"The "Prefer IPv4 over IPv6" Fix it solution will configure your computer to prefer IPv4, instead of IPv6. By default, Windows prefers IPv6 over IPv4. If you are having problems using IPv6 to connect to some websites, this may resolve the
problem."
For a Windows 7 machine ,we can try the following fixit tool to configure IPv4 prefer over IPv6 .For a Windows 8.1 machine ,we can configure it referring to the manual part .
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledComponents
If the DisabledComponents entry is unavailable, we can create it (DWORD (32-bit) Value).Then set a value with "0x20"to prefer IPv4 over IPv6 by changing entries in the prefix policy table.
Here is a link for reference :
How to disable IPv6 or its components in Windows
https://support.microsoft.com/en-us/kb/929852
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Is there any way to get the finder window spinning wheel status indicator back?
In Mac OS X Lion the bottom finder window frame is gone. Consequently the spinning wheel status indicator in the lower right corner is also gone. How do I get the status wheel back so I can tell whether the window view is still loading or hung?
pixelthinker wrote:
In Mac OS X Lion the bottom finder window frame is gone. Consequently the spinning wheel status indicator in the lower right corner is also gone. How do I get the status wheel back so I can tell whether the window view is still loading or hung?
Up top menu > View > Show Status Bar
Pete -
Status Indicator Light not working
I've been having a recurring issue with the status indicator light on my 15.4-inch MacBook Pro 2.8 GHz (Mid-2009). I learned recently that it's normal for the status indicator light to be on when the computer starts up, shuts down and goes to sleep. Lately, the status indicator light has not appeared at all when the computer starts up, goes to sleep, and shuts down. I've tried almost everything and still nothing has worked
1.) Checked to see if any of the ports are working: FireWire, Ethernet, MagSafe, SD card, USB, Mini-DisplayPort. These ports are behaving as normal, working fine.
2.) Checked and successfully paired a seven button Apple Remote to test the IR receiver.
3.) Ran an Apple Hardware Test, found nothing wrong, passed the test.
4.) Reinstalled and erased my hard drive, still having issues.
5.) Bluetooth, AirPort Extreme, microphone, audio ports, speakers, and iSight are working.
6.) Battery works and the charger is working.
7.) Backlighting for display and keyboard work.
The computer is only 1 year and 4 months old. The issue began occurring two months ago. Now the computer does sleep, but if the fans are going, it takes a bit longer for the computer to go to sleep when I close the lid.
I haven't replaced the hard drive or installed any new hardware.
The battery and power information is still at 100%:
Model Information:
Serial Number: W0945***7VC
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0003
Hardware Revision: 0003
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 4165
Fully charged:No
Charging: Yes
Full charge capacity (mAh): 6662
Health Information:
Cycle count: 43
Condition: Normal
Battery Installed: Yes
Amperage (mA): 3177
Voltage (mV): 12109
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x009fe8db
Charging: Yes
My computer's warranty with Apple, including tech support, service, and repair, has expired. However, I do have a remaining two year warranty with Best Buy Geek Squad.
I'm wondering how much would it cost out of pocket to take this computer to an Apple Store for service and repair with a Mac Genius?
So is there anything that could be wrong with this computer and if so, please help!
<Serial Number Edited by Host>studabaker wrote:
I erased the disk with Disk Utility using the installation DVD ....
If you used "Secure erase", you can be certain that there is nothing left on the disk that is causing your problem.
Because you have a long wait for access to an Apple Authorized Service Provider, if you merely clicked "erase" (the one that does not take more than an hour), you could try Secure Erase now if you want to try the final possible fix you can do on your own.
... and installed the combo update recently, the size for that update was over 1GB.
That is the right one.
I have been regularly doing those permissions. Thanks for the suggestions.
You're welcome.
I'm taking my Mac to Geek Squad and Mac Genius next month when I visit my dad in Georgia, there's an Apple Store about 45 minutes away from his house and a Best Buy that sells Macs, cause it turns out Geek Squad's coverage for Apple/Mac is only in places where they sell Macs. I used my zip code and turned up 0 results but I typed the zip code for where my dad lives in North Georgia, and a Best Buy in Atlanta is available. So I will definitely go there and visit the Apple Store to at least see what my options are.
If you need help from Apple before you can go to a physical location next month, other Apple Technical Support service option contacts are available here:
http://www.apple.com/contact/
Best Buy by far has the best warranty for computers from what the sales associate was telling me. Apparently, Best Buy warranty covers spills, drops & breaks, and overall maintenance issues. In fact, they told me if the computer can't be fixed, they'll replace it with a new one.
It should surprise nobody when salesmen tell customers that their own warranty product is best. Because you have apparently already paid for the Best Buy warranty, you can take advantage of their warranty and enjoy the "best" results if you can find a location that honors it.
Thanks for advice and if there's anything else you can think of, let me know.
You're welcome. You have all my suggestions. However, if I think of anything else, I will post back here.
We will watch for your status update. Please let us know what fix works for you.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.7); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.7)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.3.1 -
Messenger status indicator on a JSP page
Greetings
I would like to ask anyone, where can i find a status indicator for the most famous messengers eg. MSN, Yahoo, ICQ, IRC, Jabber. Actually there are two points i want to include to my JSP Page: 1. icons that indicate whether a user is offline or online, for each and every of his messengers (if any) 2. code or script that pops up the selected messenger, if the user i want to chat with, is online.
Actually the second point i mention, is almost fullfilled, but my main problem is the online/offline indicator.
Please help !
Thanks in advanceSee for example Yahoo presence taglib in Coldtags suite:
http://www.servletsuite.com/jsp.htm -
Email-statusing -service error
Hi All,
After configuring Email-statusing-service properties in config.properties file and running run.sh file throws the below error .Please sahre your ideas on this
... 12 more
2012-11-20 18:15:00,013 [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-5] ERROR com.oracle.pgbu.teammember.messaging.TaskMessageServiceImpl - Error while trying to archive messages: Error while trying to load messages: Connection refused
com.oracle.pgbu.teammember.messaging.dao.MessageDaoException: Error while trying to load messages: Connection refused
at com.oracle.pgbu.teammember.messaging.dao.ImapMessageDao.loadMessages(ImapMessageDao.java:89)
at com.oracle.pgbu.teammember.messaging.TaskMessageServiceImpl.processUpdatedTasks(TaskMessageServiceImpl.java:40)
at sun.reflect.GeneratedMethodAccessor3.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.springframework.util.MethodInvoker.invoke(MethodInvoker.java:276)
at org.springframework.scheduling.quartz.MethodInvokingJobDetailFactoryBean$MethodInvokingJob.executeInternal(MethodInvokingJobDetailFactoryBean.java:260)
at org.springframework.scheduling.quartz.QuartzJobBean.execute(QuartzJobBean.java:86)
at org.quartz.core.JobRunShell.run(JobRunShell.java:199)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:546)
Caused by: javax.mail.MessagingException: Connection refused;
nested exception is:
java.net.ConnectException: Connection refused
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:665)
at javax.mail.Service.connect(Service.java:295)
at javax.mail.Service.connect(Service.java:176)
at com.oracle.pgbu.teammember.messaging.dao.ImapMessageDao.loadMessages(ImapMessageDao.java:58)
... 9 more
Regards,
naga#DO NOT CHANGE THIS LINE
config.version = 0.3
# ================================================================
# ================================================================
# P6 Team Member E-Mail Statusing
# This file controls the settings used by the P6 E-Mail Statusing
# service. Administrators should set up the e-mail account that
# is to be used by the service as well as which messages to look
# for to update assigned tasks.
# ================================================================
# P6 Configuration
# Specify a P6 user that is assigned to at least one module access and has resource access.
p6.admin.user = admin
# Folder containing the P6 Bootstrap file.
p6.bootstrap = ************************
# Frequency for checking mail folder for new messages to process. This value
# must be cron style formatted string
mail.read.schedule=0 0/1 * * * ?
# Outgoing mail (SMTP Settings)
# The SMTP server that will be used to send the e-mails. Hostname or ip address.
send.host = 127.0.0.1
# The port number to use when connecting to the SMTP server.
send.port = 25
# Specifies whether the connection should use SSL. Valid values are true, false
send.ssl = false
# The e-mail address that will be used to send the e-mail.
send.email = [email protected]
# Password for the above username. If you do not specify the password in this file,
# you will be prompted to enter it when the application is started. You also have
# the option of specifying the password on the command line in the following
# manner: -Dsend.password=thePassword
# send.password = thePassword
# Incoming Mail (IMAP Settings)
# Settings for reading e-mails with the IMAP protocol
# Settings for reading e-mails with the IMAP protocol
imap.host = 127.0.0.1
# IMAP port number
imap.port = 143
# Use SSL. Valid values are true and false
imap.ssl = true
# IMAP username
imap.username = testuser ( user created in primavera application)
# Password for the above username. If you do not specify the password in this file,
# you will be prompted to enter it when the application is started. You also have
# the option of specifying the password on the command line in the following
# manner: -Dimap.password=thePassword
# imap.password = Test123
# IMAP search folder. This is the folder that will be searched for
# incoming e-mails to process for updates.
imap.search.folder = inbox
# IMAP Folder configuration
# The folder where messages that have been processed successfully will be
# placed. It will be created if it does not exist.
imap.success.folder = P6Success
# The folder where messages which have resulted in an error during processing
# will be placed. It will be created if it does not exist.
imap.failure.folder = P6Fail
# The folder where messages which are currently being processed will be placed.
# It will be created if it does not exist
imap.temp.folder = P6Temp
# Message Format options
# The text that will be searched for in the subject line of incoming messages.
# Messages matching this term will be for updates and applied to P6
update.task.search.term = Your requested P6 tasks
Can you please confirm the above setting s as.when SSL = true i am receivng the below error .
Error while trying to load messages: Unrecogni zed SSL message, plaintext connection?
javax.mail.MessagingException: Unrecognized SSL message, plaintext connection?;
nested exception is:
javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connecti on?
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:665)
at javax.mail.Service.connect(Service.java:295)
at javax.mail.Service.connect(Service.java:176)
at com.oracle.pgbu.teammember.messaging.dao.ImapMessageDao.loadMessages( ImapMessageDao.java:58)
at com.oracle.pgbu.teammember.messaging.TaskMessageServiceImpl.processUp datedTasks(TaskMessageServiceImpl.java:40)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.springframework.util.MethodInvoker.invoke(MethodInvoker.java:276)
at org.springframework.scheduling.quartz.MethodInvokingJobDetailFactoryB ean$MethodInvokingJob.executeInternal(MethodInvokingJobDetailFactoryBean.java:26 0)
at org.springframework.scheduling.quartz.QuartzJobBean.execute(QuartzJob Bean.java:86)
at org.quartz.core.JobRunShell.run(JobRunShell.java:199)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j ava:546)
Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext conne ction?
at sun.security.ssl.InputRecord.handleUnknownRecord(InputRecord.java:541 )
at sun.security.ssl.InputRecord.read(InputRecord.java:374)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:927)
at sun.security.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl. java:1328)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1355 )
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1339 )
at com.sun.mail.util.SocketFetcher.configureSSLSocket(SocketFetcher.java :507) -
Bypass manual email status update in Agent Inbox
hello,
I have a service class that automatically and successfully creates a Service Request from Email although it does not update email status in Agent Inbox.
my situation is very similar to this one.
[CRM ERMS workbench & Agent inbox status difference;
although the answer provided does not really solve the problem.
My knowledge in ABAP does not really extend to workflow so please do correct me if i'm saying things wrong.
So here's the scenario:
Task A that processes the ERMS rule completes task (service class)
Task B waits for the user's decision before execution so we have to manually update email status to 'Completed' in Agent Inbox.
Our approach is to search for a way to bypass this decision part so the workflow can continue.
Has anyone encountered this before? Can you give me suggestions? Thanks.
Sunntann
Edited by: sunntann on Aug 16, 2011 10:12 AMHi,
Please post it in ABAP Development Forum. then you will get prominent responses.
Regards,
Suman -
Battery Status Indicator (in menu bar) does not update
I've recently noticed that the battery status indicator in the menu bar gets "stuck," and won't update. I can force it to update by disabling and re-enabling it, or by changing the view style, but if I leave it alone, it won't change, even across sleep/wake cycles.
Any ideas?Actually, the problem disappeared after a reboot. I reboot so infrequently, I didn't even consider that as a solution, but something else caused me to need to reboot, and after that, the indicator works fine.
Still no idea what caused it to get stuck in the first place, but for now, it's better.
Good luck! -
Macbook pro 17" 3g battery status indicator stuck on 100%
Battery status indicator stuck on 100% Worked normaly until today
resetting smc does not help
Battery Information:
Model Information:
Serial Number: 9G95201YS4M0A
Manufacturer: DP
Device name: bq20z951
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0042
Hardware Revision: 0001
Cell Revision: 0119
Charge Information:
Charge remaining (mAh): 65262
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 65262
Health Information:
Cycle count: 221
Condition: Replace Now
Battery Installed: Yes
Amperage (mA): -1629
Voltage (mV): 8072I closed the lid for about 10 minutes to do something and when I came back the status seemed to be working correctly (80%) and the health now seems normal. I made no other changes. I will keep an eye on it and post if it goes haywire again. Thanks for your help
Battery Information:
Model Information:
Serial Number: 9G95201YS4M0A
Manufacturer: DP
Device name: bq20z951
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0042
Hardware Revision: 0001
Cell Revision: 0119
Charge Information:
Charge remaining (mAh): 9833
Fully charged: No
Charging: No
Full charge capacity (mAh): 12217
Health Information:
Cycle count: 221
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1550
Voltage (mV): 7930 -
What is causing flashing arrow next to battery status indicator?
I have a flashing white arrow next to the battery status indicator on my ipod touch that is causing music to be unplayable. Everything else appears to be ok. Arrow goes away when doing anything other than music. Any help would be appreciated.
Could be the Location Service icon . Go to SettingsPirvacy and either turn Location services on or off.
Next:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Excite Pro - Battery Status Indicator at 0%
Battery status indicator is stuck at 0% - battery holds charge ok just don't know what it is. I presume the battery stats file is corrupted - is the only way to fix it a factory reset?
Calibration either needs root - not possible or 60% charge - won't work as says 0%!!!!I think you should set it to factory settings.
Press and hold power button and volume up button. Then in the menu choose factory reset.
If this will not work, then the issue must be related to hardware failure -
Nokia E75 Battery Status Indicator?
Hello, well i have a problem. on most phones, if you go in the settings, there will be a section where it says all of the phone status. and i find this really useful when it comes to the battery. But on the Nokia E75 i cant seem to find the battery status indicator. Does anyone know where it is?
***Battery Status Indicator is where is says how much percent of the battery is left.Faulty battery maybe. The battery has circuitry that reports its charge level and it sounds like that isn't working. You should have it replaced under warranty if possible!
-
So many status/indicator in 2LIS_02_ITM
i am using 2LIS_02_ITM and found there are so many status/indicator fields. Wondering which one I should restrict in DTP
(in order to reconcile with standard report ME2n)
1) EKKO-MEMORY (PO incomplete)
2) EKPO-LOEKZ (Deletion indicator)
3) EKPO-BSAKZ (Control indicator) --> value such T, R ---> What is it for ??
4) EKPO-STATU (PO status)Hello,
For a Simple way out
Ask Business or funcational guys
waiting for your feedback
Regards
Nitin Bhatia -
DIsplay the status indicator as a circle on adf 11.6
I have requirements on status indicator as below .
Example : based on the employee count on employee table ,if the employees count is >10 means diplay the status indicator in red color ,if count <10 mean then display in green color .
I mean there any option to customize and display the status indicator in round shape in diffrent color each time based on the count .
Any hints ?
ThanksYou can use skinning.
.AFStatusIcon:alias: This icon gives a graphical representation that content is loading (e.g. carousel, inlineFrame). If you are editing this alias, you should also edit .AFStatusIconStyle:alias and .AFBackgroundImageStatus:alias since components will choose among these icons automatically under the necessary circumstances. This typically defines a content URL for an animated image, the width of this image, and the height of this image.
http://jdevadf.oracle.com/adf-richclient-demo/docs/skin-selectors.html -
Show only status indicator icon for Status List Web Part
Is there anyway to show ONLY the traffic light status indicator option for the status indicator web part?
Well heck! I didn't know you were being forced to suffer in Quirks Mode!
Quirks Mode kicks in if a page doesn't have a <!DOCTYPE> tag as its first element, which might have happened if you have any custom master pages, or if you upgraded to SharePoint 2010 from 2007, reusing some of the default master pages.
The fix appears to be to add a proper doc type declaration to the top of your masterpage (or to your standalone page, if it's been customized), before the opening <html> tag.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
For reference:
http://blogs.msdn.com/b/alimaz/archive/2010/01/10/sharepoint-2010-ribbon-and-quirks-mode-issue.aspx
http://blog.tylerholmes.com/2008/08/quirks-mode-strikes-again.html
http://heathersolomon.com/blog/archive/2008/01/25/DOCTYPES-and-SharePoint.aspx
Maybe you are looking for
-
After setting the reverse proxy, SSO doesn't work
Hi, We are facing a problem after setting a reverse proxy. ITS&SSO is working fine for internal users but the problem is with the external users;ITS is working fine for external users but SSO is not working. Does anyone can help us out with this prob
-
Hello Experts When I drill down a report according to Characteristics( ship_to and sold_to) The report is displaying following Messege"abort System error in Program Cl_RSDM_READ_MASTER_DATA and form_sidval_drect_" and the report is disconnecting from
-
Camera Raw like interface for Premiere Pro CC
Hi Adobe I'm a photographer and video producer looking for an easier way to grade and adjust the levels of my footage in Premiere. The DynamicLink with SpeedGrade is really lovely and quick, but getting my head around the new SG interface and being a
-
Solaris 8 ignores /etc/dt/config/C/Xresources
i'm trying to load that resource for all users: XTerm*scrollBar: true i've put it into /etc/dt/config/C/Xresources /etc/dt/config/Xresources /usr/dt/config/C/Xresources /usr/dt/config/Xresources $HOME/.Xresources but it doesn't work, howether loading
-
What is the best way to upload videos to your PC.
What is the best way to download videos from your iphone to your PC.