Email stopped working on Galaxy S3...any suggestions?

My incoming email on my Galaxy S3 stopped working. I have tried everything. I have Verizon and called them and they told me it was a phone problem.
Any suggestions?

I've noticed the SAME issue on my phone since the update. Frustrating.

Similar Messages

Wireless stopped working for iMac only, any suggestions?

Hi Folks,
I have 10.4.11 installed on my daughter's iMac, and it had been running wirelessly over WPA Personal to a Buffalo router for three months or so. Yesterday it just stopped working. I can connect to other unsecured networks in the area (albeit slowly), and if i pick other secured networks in the area, it prompts me for a password for them.
My home network acts funny though. No matter what i select for the security of the network (WPA, WPA2, etc) it never indicates that i'm using the wrong protocol or have a bad password. For the other secured networks, if i punch in the wrong password, it pops up a dialog saying couldn't join. This one, no such luck..it shows full strength signal, gives an 'autoassigned' DHCP address and sits in isolation on it's own idea of a network.
If it wasn't for the fact that i can get onto other public networks, i would say it's bad hardware...but that works. I will probably try changing my SSID later this evening (kind of a pain b/c of other computers on the network) to see if there is something 'broken' about this SSID in it's configuration.
I've tried the dollar sign thing before the password. I've tried creating new "Locations", no joy. I've tried deleting this network from the 'preferred networks' list, editing it, creating new ones, etc...no joy.
Any suggesions?
Message was edited by: ReadHeaded

Hello RedHeaded:
Please click on the "Solved" button in the header of HenryG4's post, since that solved your problem.
Thanx

I want to copy email from my mac to my pc. Forwarding one at a time via email works well, but when I try to forward several of them at a time I receive one large email. I want to receive the emails individually on my pc. Any suggestions?

I want to copy email from my mac to my pc. Forwarding one at a time via email works well, but when I try to forward several of them at a time I receive one large email. I want to receive the emails individually on my pc. Any suggestions?

Don't know any 'automatic' way - but, i have "Fetch Headers only" set on each of my 'secondary accounts'.
With varying internet service, manual "Get Messages" is probably the "Best Practice" because you will know how good your service is before you even try.
maybe set "Check for new messages every 'n' minutes" to different times
(3 minutes, 6 minutes, etc.) on each 'secondary' account.

AOL email stopped working

My AOL email has stopped working. I've tried clearing the cache, clearing out and re-entering my password. I can't delete the account - I've tried repeatedly, but since it is the default account and that can't be changed, deleting it is out of the question, I guess. I haven't gotten any new mail in over a week. Taking the battery out or shutting off the phone and restarting don't work either. I'm out of tricks. Help, please. Thanks.

The VZW service center rep advised us to download the Yahoo app rather than use the one that came with the phone. That worked for us.
DITTO on the VZW techs ignoring user questions.
From: kyes731
Sent: Friday, December 28, 2012 8:09 AM
To: <Personal information removed for privacy>
Subject: Re: AOL email stopped working - Re: AOL email stopped working
Re: AOL email stopped working
created by kyes731 in Samsung Galaxy S III - View the full discussion
Message was edited by: Verizon Moderator

I'm having trouble communicating with a transducer (Keyence LS-3100 laser scan micrometer) via the serial port. It works in Hyperterminal. Any suggestions?

Its not a simple baud-rate or parity error. If I issue the command to send data (X1) in hyperterminal I start to get data. If I then switch to Labview I still get data. However if I try to issue the send-data command via Labview I get nothing (i.e. I can read from the device, but not write to it).
I am on a Windows 98 (version 2) PC, running Labview 5.1.1

Try adding a carraige return to the end of your command.
"djb" wrote in message news:[email protected]..
> I'm having trouble communicating with a transducer (Keyence LS-3100
> laser scan micrometer) via the serial port. It works in
> Hyperterminal. Any suggestions?
>
> Its not a simple baud-rate or parity error. If I issue the command to
> send data (X1) in hyperterminal I start to get data. If I then switch
> to Labview I still get data. However if I try to issue the send-data
> command via Labview I get nothing (i.e. I can read from the device,
> but not write to it).
> I am on a Windows 98 (version 2) PC, running Labview 5.1.1

Microsoft Exchange email stopped working "Cannot Get Mail" message

About 4 days ago my work email stopped working altogether. Every time i open the application, a message 'Cannot Get Mail - The connection to the server failed.' appears. This happened about a day after i installed 2.2 firmware.
I spoke with my IT department and they haven't made any changes on the server.
I deleted all mail accounts on my phone but to no avail. I did a complete restore of the phone and it still doesn't work.
I had my phone replaced yesterday for a different issue, it came with 2.1 software and i still was not able to connect to the server.
One more thing, when i initially set up the account, i get an error message 'Unable to Verify Certificate'.
The email was working fine for about three months before that.
Any help would be very much appreciated since it's my work phone and i rely on having access to my email everywhere i go.
Thanks,
Message was edited by: imbGraff

Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
https://discussions.apple.com/message/20180176#20180176

My Ipod touch email stopped working after installing Update

my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

Hi, jewlssch.
Thank you for visiting Apple Support Communities.
If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail. If the issue persists, process a reinstall of Mavericks.
Reinstall OS X
http://support.apple.com/kb/PH10763
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason

My camera does not work on my macbook, any suggestions to fix it?

my camera does not work on my macbook, any suggestions to fix it?

Here are Applle's troubleshooting steps....
support.apple.com/kb/HT2090

Tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

Hey there Alex,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue installing iCloud Control Panel on your PC, you’re seeing an alert message related to an iCloud server not responding. Take a look at the article linked below and try running through the troubleshooting steps it provides.
iCloud: iCloud Control Panel setup cannot be started - Apple Support
So long,
-Jason

I have Acrobat 9.5 and when I try to create pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

I have Acrobat 9.5 and when I try to create>pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

Provide you have Acrobat 9 installed in an OS for which Acrobat 9 is compatible then you can use the functionality.
As well, you need a scanner connected, powered up, and the software installed. Acrobat 9 "prefers" TWAIN drivers.
Always visit the scanner vendor's site and download - install the latest greatest software.
n.b., The Acrobat 9.x product family passed into "End of Support" mid-year 2013.
As well the Acrobat 9.x product family is not compatible with contemporary OSs.
Be well...

Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

I was out of town for a few days. I had no issue installing the driver on Mountain Lion (10.8.2). What specifically happens when you try to install?
If you get this message:
then you need to right-click on the installer package and select 'Open' when you get this message:
If this isn't your issue you need to be more specific about what is happening.

My S5 corporate email stopped working. I heard it is a bug in LOLLIPOP. Has anyone heard this?

My S5 corporate email stopped working. I heard it is a bug in LOLLIPOP. Has anyone heard this?

Sorry to hear of the issues you are experiencing, StephenjCrane. We definitely want to make sure your work email is working. When you try to access your email, are you receiving an error message? Are you using the default email client, or a third party application? Do you know if other coworkers are also experiencing the same issue?
Just in case, please try a wipe cache partition as this can help stop a number of issues.
http://vz.to/1uorSMg --When you reach Step 4, please choose Wipe Cache Partition, and not Wipe Data/Factory Reset. Once this is done, please select Reboot to restart your phone.
When you try to access
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

When I plug in a Lexar thumb drive, I get a "USB Low Power Notice' saying it cannot operate because it needs more power than is available. This is new. Thumb drives worked last week. Any suggestions? Is this an apple or a Lexar issue?

When I plug in a Lexar thumb drive, I get a "USB Low Power Notice' saying it cannot operate because it needs more power than is available. This is new. Thumb drives worked last week. Any suggestions? Is this an apple or a Lexar issue?

Apple intentional, use a powered USB hub instead.

When phone is on silent mode, my vibrate feature is not working....any suggestions?

When I put my phone on silent mode, the vibrate feature is not longer working....any suggestions?

If it's a software issue and your settings are correct then the next step would be to restore your phone to new. Use iTunes to restore your iOS device to factory settings If it's the switch itself then try moving it back and forth several times. Perhaps there's a bit of pocket lint or dirt preventing a good contact. If that doesn't work then you'll have to take the phone into an authorized Apple repair centre or Apple store and have it checked out.

I underlined some text in Mail and now can't stop underling additional text. Any suggestions?

Using Mail version 4.5, I underlined some text and now can't seem to stop underlining additional copy. Any suggestions?

Select the text you don't want underlined then click Command + U on your keyboard. When you start typing again, it shouldn't be underlined. You can access text formatting from the Mail menu bar "Format" ..

Email stopped working on Galaxy S3...any suggestions?

Similar Messages

Maybe you are looking for