Email store fails with Javaload errors

Hello
I have been trying to install OCS 9.0.4.1 on Linux RedHat 2.1. the CDs installed without error, the configuration of Oracle Email information store (Mail Store) fails after showing the following error
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
errors : class oracle/mail/DirectoryAccess
ORA-29521: referenced name oracle/mail/ldap/ESDSDirServerAccess could not be found
ORA-29521: referenced name oracle/mail/ldap/ESDSContext could not be found
errors : class oracle/mail/OESContext
ORA-29521: referenced name oracle/security/jazn/JAZNConfig could not be found
ORA-29521: referenced name oracle/security/jazn/util/JAZNSecurityManager could not be found
ORA-29521: referenced name oracle/security/jazn/JAZNPermission could not be found
ORA-29521: referenced name oracle/mail/ldap/ESDSException could not be found
ORA-29521: referenced name oracle/mail/ldap/ESDSDirServerAccess could not be found
ORA-29521: referenced name oracle/mail/sdk/esmail/OracleDBPool could not be found
ORA-29521: referenced name oracle/mail/ldap/ESDSContext could not be found
errors : class oracle/mail/OESLoginContext
ORA-29521: referenced name oracle/mail/ldap/ESDSDirServerAccess could not be found
ORA-29521: referenced name oracle/mail/ldap/ESDSAuthObject could not be found
ORA-29521: referenced name oracle/mail/ldap/ESDSException could not be found
ORA-29521: referenced name oracle/security/jazn/JAZNConfig could not be found
ORA-29521: referenced name oracle/security/jazn/util/JAZNSecurityManager could not be found
ORA-29521: referenced name oracle/security/jazn/JAZNPermission could not be found
ORA-29534: referenced object ES_MAIL.oracle/mail/OESContext could not be resolved
ORA-29521: referenced name oracle/mail/ldap/ESDSContext could not be found
The following operations failed
class oracle/mail/DirectoryAccess: resolution
class oracle/mail/OESContext: resolution
class oracle/mail/OESLoginContext: resolution
I repeated the installation a second time, and the error takes place at the same place. I was able to identify which command is causing this problem by debugging the install_mailstore.sh script, and the command is
loadjava - resolve -forece -nousage -user es_mail/es $ORACLE_HOME/jlib/escommon.jar
thanks for the help

Are you doing a one-box install? I have successfully installed 9.0.4.1 without any errors, but you should verify that your Linux and the environment is correctly set according to the installation instructions. A few obvious things to check out:
1. Did you configure your kernel according to the requirements in the release notes?
2. Are the default Java RPM's removed (IBMJava2-SDK and IBMJava2-JRE)?
3. Are the following required patches installed?
compat-glibc-6.2-2.1.3.2.i386.rpm
compat-libs-6.2-3.i386.rpm
pdksh-5.2.14-13.i386.rpm
binutils-2.11.90.0.8-13.i386.rpm
kernel-smp-2.4.9-e.30.i686.rpm
4. Did you disable Sendmail?
Check with "chkconfig --list|grep sendmail"
5. Are your hostname and hostfile correctly set up?
"hostname" should return something like myserver.company.com
6. Access rights? Is the $ORACLE_HOME fully accessible by oracle-user and oinstall (or whatever group you chose)?
7. If you are doing a one-box installation, make sure that you have your enviromnt correctly set, that Enterprise Manager is stopped when performing mid-tier installation, that the Infra and Storage listeners are configured at separate ports etc.
Good luck with your installation - its well worth the effort :-)
Lars

Similar Messages

703: Subdaemon connect to data store failed with error TT9999

All,
I'm getting the following error whilst trying to connect to a TimesTen DB:
connect "DSN=my_cachedb";
703: Subdaemon connect to data store failed with error TT9999
In the tterrors.log:
16:39:24.71 Warn: : 2568: 3596 ------------------: subdaemon process exited
16:39:24.71 Warn: : 2568: 3596 exited while connected to data store '/u01/ttdata/datastores/my_cachedb' shm 33554529 count=1
16:39:24.71 Warn: : 2568: daRecovery: subdaemon 3596, managing data store, failed: invalidate (failcode=202)
16:39:24.71 Warn: : 2568: Invalidating the data store (failcode 202, recovery for 3596)
16:39:24.72 Err : : 2568: TT14000: TimesTen daemon internal error: Could not send 'manage' request to subdaemon rc -2 err1 703 err2 9999
16:39:24.72 Warn: : 2568: 3619 Subdaemon reports creation failure
16:39:24.72 Err : : 2568: TT14000: TimesTen daemon internal error: Deleting 3619/0x1558650/'/u01/ttdata/datastores/my_cachedb' - from association table - not found
16:39:24.72 Err : : 2568: TT14004: TimesTen daemon creation failed: Could not del from dbByPid internal table
16:39:24.81 Warn: : 2568: child process 3596 terminated with signal 11
16:39:25.09 Err : : 2568: TT14000: TimesTen daemon internal error: daRecovery for 3619: No such data store '/u01/ttdata/datastores/my_cachedb'
I've checked and the datastore does exist and is owned by the timesten UNIX user.
ttversion:
TimesTen Release 11.2.2.2.0 (64 bit Linux/x86_64) (tt1122:53396) 2011-12-23T09:26:28Z
Instance admin: timesten
Instance home directory: /home/timesten/TimesTen/tt1122
Group owner: timesten
Daemon home directory: /home/timesten/TimesTen/tt1122/info
PL/SQL enabled.
Datastore definition from sys.odbc.ini:
[my_cachedb]
Driver=/home/timesten/TimesTen/tt1122/lib/libtten.so
DataStore=/u01/ttdata/datastores/my_cachedb
LogDir=/u01/ttdata/logs
PermSize=40
TempSize=32
DatabaseCharacterSet=AL32UTF8
OracleNetServiceName=testdb
Kernel parameters from sysctl -a:
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
Memory / SWAP:
MemTotal: 2050784 kB
SWAP: /dev/mapper/VolGroup00-LogVol01 partition 4095992
I'm new to TimesTen and I'm planning on evaluationg it to see if it could solve an issue we're having. Any suggestions would be much appreciated.
Thanks,
Ian.

Hi Ian,
Can you please answer the following / provide the following information:
1. What are your kernel parameters relating to semaphores set to? Is anything else on the mahcine using significant numbers of semaphores?
2. Please provide the output of the following shell commands:
ls -ld /u01
ls -ld /u01/ttdata
ls -ld /u01/ttdata/datastores
ls -ld /u01/ttdata/logs
3. Please provide an excerpt of the detailed message log (ttmesg.log) between around 16:38 and 16:40 (i.e. from a little while before the problem until after the problem).
Thanks,
Chris

Request User State Store Fails with error code 0x00004005

I am trying to get a machine refresh working in SCCM and am running into a road block with the user state migration. The Task sequence hits Request user state store and then fails. In the logs on the machine it shows it downloads the cert from the SMP but it fails to verify the cert. The thing is that this was working and then stopped for no apparent reason. I have added a second SMP and it has the same issue so its got to be something environmental causing this. I have found no references to the errors I am recieving that relate to the issue so I am stumped. We have a SCCM 2007 site in mixed mode. The error log is:
The task sequence execution engine failed executing the action (Request User State Storage) in the group (Capture User Files and Settings) with the error code 16389 Action output: ployment\osdsmpclient\smpclient.cpp,1743) Request to SMP 'ATXFREPSMS01.NA.atxglobal.com' failed with error (Code 0x80090006). Trying next SMP. FALSE, HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1698) pClientRequestToSMP->Execute(migInfoFromMP.saSMPs), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2713) ExecuteCaptureRequestToSMP(migInfoFromMP), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2755) ExecuteCaptureRequest(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\main.cpp,72) OSDSMPClient finished: 0x00004005 Failed to verify certificate signature for 'ATXFREPSMS01.NA.atxglobal.com' (0x80090006) ClientKeyRequestToSMP failed (0x80090006). ClientRequestToSMP:oRequest failed. error = (0x80090006). Failed to find an SMP that can serve request after trying 4 attempts. ExecuteCaptureRequestSMP failed (0x80004005). ExecuteCaptureRequest failed (0x80004005).. The operating system reported error 16389:

Hi
I am getting the same issue.
More info:
The same task works ok for one client - an xp machine that was upgraded to vista sp1 using sccm but without usmt.
If I send this machine a task which includes usmt and os deploy it works.
On 2 other machines ( so far) , the request store fails with the same error - 0x80090006. (one of them existing vista and the other xp)
I have tried removing and adding the client from the domain but it did not help.
Any idea?
David

Transfer ID failed with LUM errors

I have 4 netware servers to migrate to OES2. One was completed successfully using Transfer id a few weeks ago. This weekend I attempted another.
The last part of the transfer id failed with LUM errors that it couldnt access lum objects admingroup, www etc. As we have had one successful migration these objects do exist in the tree and are lum enabled. The /etc/nam.conf was modified prior to starting the transfer id to point to the ldap server with the master replica. I did create too many projects which I think caused me the lum errors which I couldn't get past. With the source server turned off I followed a TID dated 2009 for this LUM error and modified the unix object which had been created to be members of the groups it required, (luckily I had the previously migrated server unix object to compare to) quit the migration software and rebooted the server and then ran ndsrepair. No errors. I did not migrate any services.
Further investigation revealed errors relating to obtaining the SSLCert but it has not expired and despite the cant get it messages the files .der and .pem appeared in the correct folders on the target server. I did copy the .der file to the required location naming it with the ipaddress as per manual instructions. The target server now has a case of dual identity. The nss volumes are mounted ok and the users can map drives using the source server name but the Suse Linux server still thinks that its the pre-migration server when I run a terminal session. Ifconfig shows the correct source server ip. Consoleone is another story. The volume objects are the old ones and the new ones with pools are not showing. From the users viewpoint it works.
Before I do more damage can someone please point me in the right direction. The target name did change to the source before the restart so therefore I should just need to do the hostname rename manually. Should I start at step 7 in the manual instructions in an attempt to fix this server or should I abandon it and start again?

$(UKevin
This defect will make into the next OES2SP2 Patch (post September). We didn't have enough time for QA to regress the fix for September Patch.
-Ramesh
>>>
From:
kjhurni<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
10/05/2010 09:06 PM
Subject:
Re: Transfer ID failed with LUM errors
Great, thanks!
As I mentioned previously, we DID find a bug about 3 weeks ago with LUM
repairfailing during the "group" (admingroup). We do have a field
patch for it, but obviously it's not made it into the channel yet.
So if you DO still have that problem, you should probably ask for the
patch (it's one file).
The defect #635574
Should help them reference the bug and get the patch for you.
I'm not sure when it will be released into the patch channel.
Not to say this fixes any and all LUM problems but since we have that
patch, we've not had any issues with the remaining OES2 SP2 64-bit
servers we've done with ID Transfer.
kjhurni
kjhurni's Profile: http://forums.novell.com/member.php?userid=734
View this thread: http://forums.novell.com/showthread.php?t=422454

Exchange- IMAP command "APPEND" (to inbox) failed with server error

Not sure, but think I was adding a mailbox to the Exchange Server's inbox, and now I am hammered with repetitive alerts;
"Some actions taken while the account “Exchange” was offline could not be completed online.
Mail has undone actions on some messages so that you can redo the actions while online. Mail has saved other messages in mailbox “INBOX” in “On My Mac” so that you can complete the actions while online.
Additional information: The IMAP command “APPEND” (to INBOX) failed with server error: An unexpected network error occurred.."
Any ideas on how to stop the messages/undo/cancel, or anything to have Mail.App work again?
thanks.

This can happen anytime you give an IMAP command offline that the server is not able to fulfill once you go back online. Mail's less-than-helpful response is to keep retrying the command, without regard for the feedback from the server. And there's no way for you to revoke the command.
In my case, Mail kept recreating a draft email that I had deleted. I believe it had an attachment that was too large for the server to accept. So Mail kept creating copies of this draft, pushing my account over the usage limit. I closed Mail, accessed my account through a different app, deleted all those copies, and emptied the trash. When I returned to Mail, it went right back into its loop, creating more draft copies until my account was again over the limit.
This problem was discussed, but never resolved, as long ago as October 2007. Here's an archived thread: http://discussions.apple.com/thread.jspa?threadID=1198026
I tried this simple fix, which worked for others, but had to undo it in my case: http://snipr.com/pmlte
I'm now trying another approach. If it works, I'll describe it. Mail has been launching for 14 minutes now.

Disk Erase failed with the error- Operation timed out

I've checked my computer- Mac Book White in Apple store, everything is fine just the hard disk has been corrupted. Needed to erase and reinstall. By the time I wanted to erase it, I can't erase and appears "Disk Erase failed with the error- Operation timed out".
Anyone knows how to solve this question would be nice.
Thanks

Well give this a try:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now download a utility like TinkerTool System or Leopard Cache Cleaner - VersionTracker or MacUpdate - and use it to clear out your system, user, and font caches.
And, try this for the software update issue:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist
"xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

Rendering of Proxies in AE fails with generic error messages.

*sigh* working with AVC in CS4 on my quad core has been an exercise in pain.
I've followed the optimization guides linked to in the different forum posts and that lets me zip along until I actually start adding effects. Then I am right back to a crawl. I recently discovered proxies in AE and learned that I can use "replace" in premeire to leverage those same proxies... Sweet... When I works I am back to editing in both in real time!
The problem is AE is regularly failing to generate proxies for me and I cannot figure out why. All my video is shot the same 24mbps, 60fps, 1080p (true 60i). All shot from my Canon HF S10.
The error is always "Error reading frame from file" and it always occurs just before the render is about to complete. Sometimes I get lucky and a working .mov was generated in spite of the error. Bu most times the file isn't there.
So my 2.4ghz quad core with 8gb ram can't edit the originals and I can't create proxies... I'm effectively dead in the water.
I tried using Media Encoder to generate my proxies with no success either. It fails with "Unspecified Error".
Both times I am trying to encode to Quicktime, Jpeg, Draft Settings. For the heck of it I tried different codecs, etc. Nothing seems to help. Even worse is sometimes if I just queue the same file multiple times it eventually works.
Is there anything at all I can do to make successful proxy generation less like winning the lottery?

Yeah I updated to that right away. Premiere itself seems to behave most of the time. To be honest I've hardly had any problems with Premiere even before the 4.2 update.
But AVC (mts files) seem to be very problematic in AE in general. I also experience the issue mentioned here:
http://forums.adobe.com/message/2404464
Sounds like re-encoding to another format is the only way I'll be able to work in AE reliably. So I have to figure out a way to get Media Encoder to finish it's jobs.

Cube refresh fails with an error below

Hi,
We are experiencing this problem below during planning application database refresh. We have been refreshing the database everyday, but all of a sudden the below error is appearing in log. The error is something like below:
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
When the database refresh is done from workspace manually, the database refresh is happening successfully. But when triggered from unix script, its throwing the above error.
Is it related to some provisioning related issue for which user has been removed from MSAD?? Please help me out on this.
Thanks,
mani
Edited by: sdid on Jul 29, 2012 11:16 PM

I work with 'sdid' and here is a better explaination of what exactly is going on -
As part of our nightly schedule we have a unix shell script that executes refresh of essbase cubes from planning using the 'CubeRefresh.sh' shell script.
Here is how our shell looks like -
/opt/hyperion/Planning/bin/CubeRefresh.sh /A:<cube name> /U:<user id> /P:<password> /R /D /FS
Here is what 'CubeRefresh.sh' looks like -
PLN_JAR_PATH=/opt/hyperion/Planning/bin
export PLN_JAR_PATH
. "${PLN_JAR_PATH}/setHPenv.sh"
"${HS_JAVA_HOME}/bin/java" -classpath ${CLASSPATH} com.hyperion.planning.HspCubeRefreshCmd $1 $2 $3 $4 $5 $6 $7
And here is what 'setHPenv.sh' looks like -
HS_JAVA_HOME=/opt/hyperion/common/JRE/Sun/1.5.0
export HS_JAVA_HOME
HYPERION_HOME=/opt/hyperion
export HYPERION_HOME
PLN_JAR_PATH=/opt/hyperion/Planning/lib
export PLN_JAR_PATH
PLN_PROPERTIES_PATH=/opt/hyperion/deployments/Tomcat5/HyperionPlanning/webapps/HyperionPlanning/WEB-INF/classes
export PLN_PROPERTIES_PATH
CLASSPATH=${PLN_JAR_PATH}/HspJS.jar:${PLN_PROPERTIES_PATH}:${PLN_JAR_PATH}/hbrhppluginjar:${PLN_JAR_PATH}/jakarta-regexp-1.4.
jar:${PLN_JAR_PATH}/hyjdbc.jar:${PLN_JAR_PATH}/iText.jar:${PLN_JAR_PATH}/iTextAsian.jar:${PLN_JAR_PATH}/mail.jar:${PLN_JAR_PA
TH}/jdom.jar:${PLN_JAR_PATH}/dom.jar:${PLN_JAR_PATH}/sax.jar:${PLN_JAR_PATH}/xercesImpl.jar:${PLN_JAR_PATH}/jaxp-api.jar:${PL
N_JAR_PATH}/classes12.zip:${PLN_JAR_PATH}/db2java.zip:${PLN_JAR_PATH}/db2jcc.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/css-9_
3_1.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/ldapbp.jar:${PLN_JAR_PATH}/log4j.jar:${PLN_JAR_PATH}/log4j-1.2.8.jar:${PLN_JAR_
PATH}/hbrhppluginjar.jar:${PLN_JAR_PATH}/ess_japi.jar:${PLN_JAR_PATH}/ess_es_server.jar:${PLN_JAR_PATH}/commons-httpclient-3.
0.jar:${PLN_JAR_PATH}/commons-codec-1.3.jar:${PLN_JAR_PATH}/jakarta-slide-webdavlib.jar:${PLN_JAR_PATH}/ognl-2.6.7.jar:${HYPE
RION_HOME}/common/CLS/9.3.1/lib/cls-9_3_1.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/EccpressoAll.jar:${HYPERION_HOME}/common/
CLS/9.3.1/lib/flexlm.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/flexlmutil.jar:${HYPERION_HOME}/AdminServices/server/lib/easse
rverplugin.jar:${PLN_JAR_PATH}/interop-sdk.jar:${PLN_JAR_PATH}/HspCopyApp.jar:${PLN_JAR_PATH}/commons-logging.jar:${CLASSPATH
export CLASSPATH
case $OS in
HP-UX)
SHLIB_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${SHLIB_PATH:-}
export SHLIB_PATH
SunOS)
LD_LIBRARY_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LD_LIBRARY_PATH:-}
export LD_LIBRARY_PATH
AIX)
LIBPATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LIBPATH:-}
export LIBPATH
echo "$OS is not supported"
esac
We have not made any changes to either the shell or 'CubeRefresh.sh' or 'setHPenv.sh'
From the past couple of days the shell that executes 'CubeRefresh.sh' has been failing with the error message below.
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
This error is causing our Essbase cubes to not get refreshed from Planning cubes through these batch jobs.
On the other hand the manual refesh from within Planning works.
We are on Hyperion® Planning – System 9 - Version : 9.3.1.1.10
Any help on this would be greatly appreciated.
Thanks
Andy
Edited by: Andy_D on Jul 30, 2012 9:04 AM

At DI R3trans fails with this error code ORA-12545, but CI runs

Hello Gurus,
We have our BW System on two instances with a separated oracle database server.
Last week the system was unreachable and we must restarted it hard.
After that, the Listener could started and runs. The DB could started, mounted and opened successfully.
Now we have a special problem.
The central instance can connect at startup to the database. But the dialog instance not.
The DI get the following error:
|> R3trans -x
This is R3trans version 6.14 (release 701 - 12.06.09 - 15:20:00).
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
R3trans finished (0012).
The trans.log entry are:
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12541'                        17 0.187511
4 ETW000 [dev trc     ,00000]     set_ocica() -> SQL error code 12541                                    13 0.187524
4 ETW000 [dev trc     ,00000] -->oci_get_errmsg (con_hdl=0, rc=12541)                                   14 0.187538
4 ETW000 [dev trc     ,00000]     OCIErrorGet -> SQL error code: 12541                                   14 0.187552
4 ETW000 [dev trc     ,00000]     ORA-12541: TNS:no listener
4 ETW000                                                                                22 0.187574
4 ETW000 [dblink      ,00433] ***LOG BY2=>sql error 12541 performing CON [dblink#4 @ 433]           14396 0.201970
4 ETW000 [dblink      ,00433] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#4 @ 433]                   39 0.202009
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
A telnet connection test to port 1527 are also unsuccessful.
But sporadicly the telnet or R3trans connection are successful, but the second check are unsuccessful.
We have checked the telnet connection to another oracle database server (ERP) at port 1527 and it works.
The CI have some entry's in ST22 with DBIF_RSQL_SQL_ERROR --> ORA-03114: not connected to ORACLE.
Are someone known something about this issue?
regards
Chris

@ Sunny Pahuja:
We checked sapmnt.
Sapmnt is common on CI and DI. It was never mounted on DB. But DB runs perfectly until this issue.
@ Ankit Gupta
We checked the configuration of listener.
It is the same like the listener configuration of our ERP system with CI, DI and DB on separate Servers, too.
@ Rajesh Narkhede
From DB Server
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 07:40:56
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/BW2/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
OK (100 msec)
On CI and DI we don't have tnsping.
Just copy it don't work.
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 08:39:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Message 3511 not found; No message file for product=network, facility=TNS
Message 3512 not found; No message file for product=network, facility=TNS
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
Message 3509 not found; No message file for product=network, facility=TNS
How to get it on the CI and DI. In the SAR files at SAP it is not included. I can't found something in the Web.

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

The installation of SAP Front-End components failed with 95 errors.

I tried to install SAP GUI 7.20 on Windows Vista X64. And I got this error message:
The installation of SAP Front-End components failed with 95 errors.
This 7.20 version used to run on this operating system fine. I reinstalled the OS, and now I got this.

Hi,
I suppose you reinstalled the same OS.
Did you install the JSDK (java) afterwards. As you must be aware Java is a pre-requisite for the SAP Frontend.
Also make sure you have set the environment variables after installing java.
Further documentation, the SAP installation manual can be found in the u201CDOCUu201D folder of the installation software.
Regards,
Rohan.

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Partition Failed Partition failed with the error: POSIX reports: The operation couldn't be completed. CAN NOT ALLOCATE MEMORY

I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
https://discussions.apple.com/message/13288923#13288923
but it fail to partition with the msg:
Partition Failed
Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
pls pls pls help urgentely on this matter I stop working.
Kind Regards,
pe

Hi again OGELTHORPE.
I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
Thanks again for your suggestions!
L.

Email store fails with Javaload errors

Similar Messages

Maybe you are looking for