Email Triggering on FD32 when Customer Credit limit exceeds

Dear All,
We have a requirement to trigger an e-mail, whenever the credit limit of a customer is exceeded, the credit limit are in FD32.
A mail should go to the customer, with attachment as a specific pdf format.
So does writing an email functionality in a report and submitting it in background is recommended or there is a way through which email can be triggered.
Thanks,
A Sustainer

Dear All,
Thanks for your replies, that would really helping me in approaching the best way to achieve this task.
In response to Modak,
We have report f.31 (credit overview report) and i am planning to make an enhancement in this report and write code for mail triggering, In this report we have a field, which shows the credit limit used (KLPRZ).
In response to karri,
As also recommended by you, I will submit this f.31 report as B/G job with mail triggering code.
In response to Ibrahim,
Thanks for suggesting me not to use workflows.
Thanks
A Sustainer

Similar Messages

  • Credit Limit Exceeded in Billing

    Dear all,
    While I am saving a invoice through VF01, I am getting an error that Customer Credit Limit Exceeded - message ZSD000. I have not defined any credit control settings. Please can any one faced such error? Please guide me.
    Can anyone please throw some light on this issue.
    Thanks & Regards,
    AK
    Edited by: anand k on Nov 23, 2011 11:27 AM

    I remember we used VKM3 transaction to clear/add some checkbox related to credit limit and saved the document. Then it allows. Try it out.
    Regards,
    Ganga

  • Approval Procedure not triggered when Credit Limit Exceeded

    Hi,
    I've defined an approval procedure which I would like to launch when a clients Credit Limit has been exceeded. I've checked the required fields on Administration > General Settings > BP tab (credit Limit, Commitment Limit, AR Invoice, Delivery, SO). I've also checked the Activate Approval Procedures on the same tab.
    I know the approval procedure has been set up the correct way, since it is launched when I change the Terms to for instance 'Total document'. 
    There is a system-message when I am creating a Delivery Note for a customer indicating that the credit limit for this customer has been exceeded. But still, the system allows the user to add the document without triggering the approval procedure....
    What am I doing wrong?
    Btw: The credit limit exceeded is in negative numbers, but I've tried both the condition 'Deviation from Credit Limit greater than 1' and Deviation from Credit Limit Less than 1...

    Could you clarify what you mean by "The credit limit exceeded is in negative numbers"
    Negative number: the system message I get when I create a delivery note for a customer, exceeding the credit limit is the following:
    Customer has exceeded credit limit - 95.479 EUR
    Customer has exceeded commitment limit - 95.479 EUR
    Continue (Y/N)
    Make sure the Credit Limits are set in the BP Master. --> OK, credit limit is set to 100 EUR, Commitment limit to 100 EUR
    Also use Great than in Ratio and try to use a small number like 10 in the value  --> I am using 1 EUR
    Also, check in System Initialization > General Settings..BP Tab Activate approval procedure is checked. --> it is checked.
    Using the range option does not solve the problem, in fact even if I use 'Deviation from Credit Limit does not equal 1 EUR' the approval is not triggered. When I use the same Approval template, but I alter the terms to Total document greater than 1 or Discount% greater than 1 the approval is triggered.
    Edited by: Rui Pereira on Apr 29, 2009 1:19 PM

  • Making Customer Credit Limit (FD32) a sensitive field

    I am wondering if it is possible to mark customer credit limit (field KNKK-KLIMK) which you enter by using T-Code FD32 a sensitive field for dual control? If so, I request for detailed steps as I have been trying to do so but could not succeed. Please guide me.
    Thanks in advance.
    Moazzam

    Moazzam,
    you can have sensitive field only for Vendor and Customers Master Data (FK09 and FD09). If you want define FD32 fields for another user approbation you must create a User Exit or install a workflow.
    regards

  • Credit Limit Exceeded (F-22 Customer Invoice)

    When i try to post a customer invoice in F-22, the system is giving only a warnning message as credit limit exceeded. Cheked OBA5 with Message number and application area F5 139, it is in Error only but still the system is throwing a warring message and posting the document.
    OB45 Completed
    FD32 Completed
    OBA5 Completed
    Please suggest how can we make an error instead on warning message...is there any Note.

    This relates to SD - Credit Management. Please remember to post at correct forum for prompt answers.
    However, in this case please check transaction OVAK. Credit check seems configured with Warning message for the relevant Sales Document Type. Change it to Error message.
    Regards
    Ajay

  • Customer Credit Limit

    Dear Experts,
    i have received advance of INR 5Lacs from a newly created Customer with defualt credit limit of INR 1. Now during Sales Order for INR 3.50Lacs, the systems displays "Static Credit Check : Credit Limit exceeded by xxxx INR.
    why inspite of receiving advance, this still shows for credit limit check. please someone explain & help me out.

    Hi,
    When creating Sales order system goes to Credit limit tab and checking when credit limit is 1 lac naturally it will through error eventhough you receive 5 lakhs as advance.
    My suggestion is to change the credit limit from 1 lac to 5 lac subject to approval of sales staff.
    Thanks and Regards
    Srinivasa Chary

  • Customer credit limit updation problem

    Hi,
    i created some customers, right now they don't have any credit limits, now by using fd32 Tcode i am trying to change the customer credit limit (creating new credit limit), but it is going to short-dump due to some time-out problem, can any one tell me for already existing users how to create credit limt.
    Thanks,
    Sreeram.

    Hi
    You need to enable the "audit trail" for this particular field
    Go to System Admin: Security:AuditTrail:Install
    Enable Audit Installation for AR
    Enabling the audit trail wil help you know the changes history.
    As far as my knowledge is concerned, there is no approval hierarchy on customer credit limit application, all you can do is to assign the responsibility to the authorized person.
    Regards
    Nouman Shaikh

  • Customer Credit Limit Not Showing in VKM4

    In some cases the customer credit limit is not being displayed in VKM4 for dynamic credit check holds. It seems to happen for certain customers but we can't tell why. The holds are valid, the limit is just not showing and we'd like to know if this is by design or a bug.
    We are running ECC 6.0
    Thanks

    Dear wradue      ,
    What difference did you find comparing the FD32 of customers with credit limit and without credit limit in VKM4?
    Thanks & Regard,
    Hegal K Charles

  • Customer Credit Limit on CRM Sales Order

    Dear All,
    Can the customer credit limit be displayed on CRM Sales order(Customer from ECC, we use simple credit check on SAP ECC)
    Regards,
    Ahmed

    Hi,
    The standard credit check in SAP CRM calls up the automatic credit check in SAP R/3. You must define an RFC destination, and specify this destination for the credit check.
    ·        To define RFC destinations in CRM Customizing, choose Customer Relationship Management ® CRM Middleware and Related Components ® Communication Setup ® Define RFC Destinations.
    ·        To specify destinations for the credit check, choose Customer Relationship Management ® CRM Middleware and Related Components ® Communication Setup ® Middleware Parameters ® Define Middleware Parameters. Then choose the activity Credit Check and enter an RFC destination for the parameter CRMCREDCHE.
    You can also carry out an initial data transfer for credit data.For transactions that are still open for which you are reactivating update of credit data, you can initially transfer the credit data for a reorganization of data in SAP R/3. To do this, start the initial data transfer for object CMDOC_NOTIFY using transaction R3AS.
    When setting up credit limit check, refer to SAP Note 568157, 570155 and 619500.
    With Regards
    Selvam T

  • Customer Credit Limit showing wrong in VKM3

    Hi All,
    Customer credit limit is showing wrong in VKM3 for all the customer.
    i.e : actuall T.Code:F34 is showing 740,000.00 which is correct. But in VKM3 it is 740.00(insted of 740K it is showing 740 only)
    The same thing happening for all the customer. How can I correct this. Pls advise.
    Thank You ,
    Pranitha.

    Thank You for you replay.
    But I found some other client, the credit limit same in FD32 and VKM3.they also ECC6.0.
    So what is the solution.

  • Does Sap automatically updates customer credit limit from Financial Doc?

    Hi Everyone
    Does the Sap automatically updates the customer credit limit from the Financial document(Letter of credit) assigned to particular sales order.
    I actually want to know that how can i configure the control at delivery order if i assigned the financial document at sales order.Does the system automatically creates or updates the credit limit of that customer to control over delivery order.
    If yes then how and i only want to handle credit management in the case financial document(letter of credit).
    Regards;Vijay Kumar

    Hi,
    Hi,
    yes it does.
    Note some important points
    Inautomatic credit control field "No Check field", you can enter the number of a requirement with which you can control when credit checks are not carried out. You can deactivate some or all checks. This allows fine tuning on an individual basis for defining credit-relevant transactions and when credit checks do not need to be carried out.
    A check should be made to see whether the payment guarantee form has changed (letter of credit, payment card). If the payment guarantee form has not changed and if the old net value does not exceed the new net value, then no credit check is carried out.
    refer these book also
    McGraw.Hill.Implementing.SAP.ERP.Sales.and.Distribution
    TSSD40_3
    GTS100
    also check wiki also
    Thanks
    Chidambaram

  • Report to show order blocked due to customer credit limit

    Hi,
    We can set customer credit limit and if the orders exceed the limit, the order will be blocked. I need to know is there any standard SAP report showing the orders blocked (due to credit limit) and unblocked?

    Hi Paul Hawk,
    There are no standard SAP report showing the orders blocked (due to credit limit) and unblocked. But there are reports which needs some customization.
    Please see the reports
                        RVKRED06 credit check for blocked SD documents,
                        RVEXSLIB   List of all blocked partners / documents
    Regards,
    Lakshmi

  • Customer Credit limit and Exposure

    Dear Experts,
    I have an issue regading Customer Credit limit and Exposure in f.31.
    My customer have security deposit it is including in customer's credit exposure.
    My question is  this correct to show customer credit exposure along with spl gl indicator (H) security deposit?
    if not how to exclude it from balance.
    Plz its Urgent.
    Regards,
    Javeed

    Hi,
    Thanks for reply
    I have tried in FBKP and remove check box for credit limit
    but there is no immediate effect in (f.31) it is showing balance as previuos one
    but we post or book new security deposit with same its balance is not effected in (f.31)
    but we have already posted lot of entries for sec. deposits for customers.
    what i have to do for immediate balance effect for security deposit?
    Thanks,
    Javeed

  • Customer Credit Limit from Oracle Financials to SAP

    Friends,
       SAP has  to receive the Customer credit limit data from Oracle Financials.  Can any one help me what idoc / bapi should i use for this inbound process.
    If the question is not clear ,  please let me know.
    Regards
    Raj

    Hi there,
    In WE20, check if there is Oracle system defined as Logical system in your company. If yes, then click on the logical system. It will display the details.Check in the inbound parameters what message types are assigned for that system.
    If Logical system is not defined for Oracle, then we need to define 1.
    I guess message type is CRESTA. Not sure.
    Regards,
    Sivanand

  • VA02: Production order/ plan order not processed when credit limit exceeds

    Hi,
    In VA02, when I try to process a Production order/ plan order from sales document , i get an information message saying that  ' Subsequent function not possible due to credit block.'  It is going into the incomplete logs. But as per my client's requirement, the order should be processed even if the credit limit exceeds though the message pops up. the message number is V1849. Can you please tell me how to do that?
    Regards,
    Lohitha

    hello.
    stop the credit check for particular order type.
    VOV8-order typeCheck credit limit--choose option
       No credit limit check
    A  Run simple credit limit check and warning message
    B  Rund simple redit limit check and error message
    C  Run simple credit limit check and delivery block
    D  Credit management: Automatic credit control
    for particular item category
    choose item category : uncheck credit check active check box
    for particular condition
    OVA8----assign routine for that..
    write coding
    let me know anything requires
    regards,
    Rushikesh

Maybe you are looking for

  • Taking Backup of Attachments(files) stored in the wwv_flow_files

    hi, i am buiding an application which involves uploading files and downloading of files, but now i am trying to achive purge of data in the wwv_flow_files but before purging i want to take the backup of all data or files in the wwv_flow_files, apart

  • Local versus Hosted Websites and Internet Explorer 7

    I am working on a site that will be deployed over the internet and distributed on a DVD-ROM. There are many users that do not have access to the internet throughout the day as they are mobile. They have laptops and what to have access to the informat

  • Select Expert - Record

    I'm trying to limit the values presented in the Select Expert - Record tab based upon it's relationship to a selected value from another field. We have several hospitals.  Each hospital has several floors or unit/wards usually identified as 6 East, 2

  • Re-upload or re-download?

    I recently had to re-install windows on my pc because it had been corrupted. I have all my music backed up on an external hard drive luckily. I also have a subscription to itunes match. How can i add all my music back to itunes without redownloading

  • Using iphoto and publishing it

    I cant get my journal from iphoto to upload in my icloud, it gave me a link but then said there were no public journals. I turned off the Add to home page and just selected Publish to icloud and it is just taking forever to upload. Is it just slow, o