"email usage" doesn't change with reduction in emails
I made a large reduction in emails but the email usage tab did not show any reduction at all.
If you deleted emails, did you also empty the Trash folder?
Similar Messages
-
Why the html file doesn't change with applet ?
i am new to java , i get a problem when i am modifying a applet . i recompile it to .class file but did not change its name . and the .html file which use the applet doesn't change with it , it still shows the original style , even when i delete the .class file . it works until i changed the name of the source file and use the different .class file in html . it's troublesome if i need to modify the source file because i must change the name to get it . can you tell me why and how could i avoid this ?
I am new also & had a similar experience.
In my case it was aftercompiling and trying to refresh the browser to get it to display the new version of my applet. I got around this by holding Ctrl down and pressing F5 to refresh.
Also, some of the systems at university cause exactly the problem you describe. Not sure why it should work but we overcame it by placing our files in the JDK folder on those systems & it worked properly. May be worth a try. -
When I send a email, the people get it with my daughters email as the one who sent it. I have checked all the settings ...help
Does your daughters email address show up as one of the options in the From line as discussed above? If so, try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!
-
IPad unread email count doesn't tally with Microsoft Exchange 2007 email count from OWA.
I discovered that when we first setup the iPad to sync email from Microsoft Exchange 2007 server via ActiveSync, the total number of unread email count tally with the count from OWA. After a few days, the unread email count will be out of sync. The settings for iPad "Mail days to syn": No limit. Mail to show: 1000. iPad iOS: 5.1.1
We performed the following:
1. Compare email by email to verify which are the read email from OWA doesn't sync to iPad. We discovered that some emails read from OWA doesn't sync with iPad even performed forced update. However, if we delete that read email from OWA, it will delete (unread) from iPad immediately after sync.
2. Email recall message for successful recalled displayed in OWA but not on iPad.
3. Calendar invite message forward as email displayed in OWA but not in iPad.
Is there a bug for Microsoft Exchange 2007 or there is limitation for iPad?
Any kind expert can advice?
Thanks.Can you do setup an unread mail folder that shows all unread mail regardless of what folder it really is in on the iPhone mail program somehow?
No.
If not, can this be submitted as an enhancement as it makes email use very cumbersome.
Yes. You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html. -
Email account doesn't work with ios7
I'm an italian user.
I have upgraded to IOS7.
After upgrade some email accounts works fine and other email accounts doesn't work at all (Alice from telecom, Tiscali).
Any suggestion ?The problem is deeper than that. It's not reader. Now the same form I was creating in LifeCycle Designer ES2 yesterday, with the actions working perfectly, no longer work. None of the actions are working.
Could it be realted to me trying to set the default version compatibility to Adobe 7. It gave me warnings, so I set it back to 9.
Any help would be appreciated. -
Created textbox doesn't change with variable?
I've tried various ways of changing tumbler = 0 to
if(...){tumbler = 1}, if(...){tumbler = tumbler +1} and so forth,
but unless I manually change the tumbler value, the text in the
question box doesn't budge. I've tried moving the tLabel outside
the onEnterFrame and it just sets to undefined.
What's going on?I seem to be having a problem with inputting new data into
the textfield, especially in the form of arrays.
Every time I try to input an array that changes with an
onenterFrame, it spits out "undefined".
I can manually change the TLabel.text to display anything,
such as "Question 3" or "My Dog is an Awesome Dog";
but when I set up tLabel.text = myArray[myvariable];
it displays 'undefined'
I've tried this in an alternative version of the program with
similar problems.
When I tried sticking the code for the textfield into an
onEnterFrame all text disappears entirely. -
I am an iPad novice and whilst I have managed to set up my hotmail account on the iPad - I ham having trouble with my business email (I can receive emails, but cannot send and it says' email rejected by server'
That sounds like a settings issue to me. Check with your IT depatment to make sure you have it configured properly.
-
Email button doesn't work with Adobe Reader, only Acrobat
Hi,
I'm new to Adobe products and don't have much experience. Here's my problem.
I used LiveCycle Designer ES2 to create a fillable PDF form, with an email submit button. (uses mailto: to open users Outlook and attaches the pdf automatically)
The form is viewable by all, but the email button only works if opened with Acrobat.
Is there a way to have this work with Reader? We obviously don't have Acrobat licenses for every user.
Any support or assistance would be greatly appreciated.
ThanksThe problem is deeper than that. It's not reader. Now the same form I was creating in LifeCycle Designer ES2 yesterday, with the actions working perfectly, no longer work. None of the actions are working.
Could it be realted to me trying to set the default version compatibility to Adobe 7. It gave me warnings, so I set it back to 9.
Any help would be appreciated. -
Catalog doesn't change with connection Update
When working with each of two reports using Crystal Reports Developer XI Release 2 (11.5.8.826), I am able to use the Set Datasource Location dialog to point my report at a different database (exact same structure); however, when I look at the Properties under each table in the top pane, the Catalog is still the old table. Is there a report or a Crystal Reports setting that is preventing the Catalog from changing from the old to the new database/connection?
Please post your SDK development questions to the Developers forum
-
Average doesn't change with deletion of tuples?
Hi there, I am using Oracle 11g EE. I'd appreciate if you could shed some light on my confusion. The following statement attempts to delete all tuples in the ACCOUNT table when the balance falls below the average balance in the ACCOUNT table:
delete from account where balance < (select avg (balance) from account);
I was taught that there is an issue with this because as we delete tuples from the table, the average balance changes. I ran this statement and encountered no issues.
It correctly deleted the tuples where balance is less than the initial average of the table.
The solutions suggested to fix the potential issue are as follows:
1. First, compute avgbalance and find all tuples to delete
2. Next, delete all tuples found above (without recomputing avg or retesting the tuples)
My question is, does the average really get changed in the (select avg (balance) from account) clause as we delete tuples?
I know how to solve this potential issue. Just don't quite understand why the statement in question works perfectly. I tried testing it out by inserting tuples that have balance close to the initial average. No issues there.
Thank you in advance!There's even more basic concepts involved
read consistency
A consistent view of data seen by a user. For example, in statement-level read consistency the set of data seen by a SQL statement remains constant throughout statement execution.
data consistency
A consistent view of the data by each user in a multiuser database.
SQL Processing for Application Developers
SET TRANSACTION
Regards
Etbin
something to play with
select rid,x,overall_average,running_average,
case when case when x < overall_average
then 'higher'
when x > overall_average
then 'lower'
else 'equal'
end !=
case when x < running_average
then 'higher'
when x > running_average
then 'lower'
else 'equal'
end
then case when x < overall_average
then 'higher'
when x > overall_average
then 'lower'
else 'equal'
end || ' ~ ' ||
case when x < running_average
then 'higher'
when x > running_average
then 'lower'
else 'equal'
end
end average_mismatch
from (select rid,x,
avg(x) over (order by rid rows between unbounded preceding and unbounded following) overall_average,
avg(x) over (order by rid) running_average
from (select level rid,100 + trunc(10 * dbms_random.normal) x
from dual
connect by level <= 20
RID
X
OVERALL_AVERAGE
RUNNING_AVERAGE
AVERAGE_MISMATCH
1
105
99.65
105
lower ~ equal
2
111
99.65
108
3
100
99.65
105.333333333333333333333333333333333333
lower ~ higher
4
102
99.65
104.5
lower ~ higher
5
108
99.65
105.2
6
87
99.65
102.166666666666666666666666666666666667
7
105
99.65
102.571428571428571428571428571428571429
8
114
99.65
104
9
85
99.65
101.888888888888888888888888888888888889
10
100
99.65
101.7
lower ~ higher
11
100
99.65
101.545454545454545454545454545454545455
lower ~ higher
12
109
99.65
102.166666666666666666666666666666666667
13
88
99.65
101.076923076923076923076923076923076923
14
89
99.65
100.214285714285714285714285714285714286
15
81
99.65
98.9333333333333333333333333333333333333
16
108
99.65
99.5
17
103
99.65
99.7058823529411764705882352941176470588
18
99
99.65
99.6666666666666666666666666666666666667
19
93
99.65
99.3157894736842105263157894736842105263
20
106
99.65
99.65
Message was edited by: Etbin
an example added -
Billing Block status in Sales Order doesn`t change with change in Item Cat
Hi Experts,
I have a peculiar problem once I am creating a Contract. In the contract I enter a material with default item category (with Milestone Billing Plan & Billing Block assigned to it),but once I change this Item Category to the other item Category (having No Billing Plan & No Billing Block assigned to it), then the Original Billing Block in the contract for this material does not disappear(the vice-versa of this scenario is not there).
Request for your help on this issue.
Thanks,
VivekHI
Check controls of document in VOV8 any billing block is assigned for the document.
Regards
santosh.A.R -
Camera roll usage doesn't correspond with number of pictures in app
I am trying to make more space to install iOS 7 so have been sorting photos. In settings, my camera roll usage is showing as 4.6GB, but in the photos app I only have 26 photos on the camera roll. Why is this? I have recently synced the ipad with my computer but this didn't rectify the problem. Also, if I place a photo in an album, does this this mean that the photo will take up double the amount of space? Cheers
Are messages with all the pictures and videos sent between you and your friends listed somewhere below, or not?
-
My navigation bar address doesn't change with new site loaded
With the new Firefox 4: if i have multiple tabs open in one window, the navigation bar will only show one of those tab's address for all of the tabs when those should be completely different addresses. i.e. if i look at another tab in same window it has address for first tab, not new one. I'd like to be able to copy and paste the address sometimes. Please help.
A few possible causes.
The first is the file that stores details of browsing history and bookmarks is corrupt. For details on how to fix that see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
Another possible cause is an add-on interfering with the location bar. To test this, use the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
If you are not using the default theme, try switching to it. Some themes can cause this problem. -
JTable cell value doesn't change with user input
I'm making a program that uses a custom table model (extends AbstractTableModel). The problem is when I type a value in one of the table cells, then press enter (or click outside the cell), the value goes back to what it was originally. So for example, a cell has "oldvalue", I type in "newvalue", press enter, and now the cell still reads "oldvalue". I figured the renderer would automatically update the cell by calling MyTableModel.setValueAt (...), but maybe I need a listener to do this? let me know. thanks
alright, well basically I'm making a database manager
and thought it would be easier to extend
AbstractTableModel and then do all the queries inside
the methods instead of listening for events. Second
thing, I put a debug statement and setValueAt never
gets called when you type in a new cell value. How
does it update the cell then is my question?It's your TableModel bug but a much better advice would be that you should use
DefaultTableModel instead of extending AbstractTableModel. The DefaultTableModel
is usually more than enough for an ordinary JTable application.
The simplest and standard way of handling DB data from JTable is updating
vectors for DefaultTableModel data with your new DB data set. You don't need
to worry about low-level event firing, cell editor control etc. if you use
DefaultTableModel. See API documentation of DefaultTableModel closely. -
I said it all in the Question
At a guess, I'd say your firewall is blocking the connection. If you're using Windows firewall, see [[Configuring Windows Firewall]]
If you're using a 3rd party firewall, see [[Firewalls]]
Check the firewall logs. Usually, if the firewall blocks a connection, even if if the application resides on your own computer, it'll be listed in there.
Maybe you are looking for
-
My exchange email no longer works
I have deleted my email account countless times but still it will not connect to the server. I took it to the Apple shop who said as a last resort reset the phone to factory setting. So I backed up my phone to icloud and wiped it and still my email w
-
I want to make the move to Final Cut Express, but I don't think that v.4 will work on my iBook correctly due to my 512MB of RAM. Will v. 3.5 be a acceptable candidate? Is there anywhere you can still purchase v.3.5? Thank you for your assistance in a
-
My Mac Lion is very slow all of a sudden. How do I get it back up to speed?
my mac osx 10.7 lion suddenly became very slow to work on safari. How can I bring it back up to speed? Thanks Doug
-
How to get the sequence value from the database
Hi I created one sequence in the database. Then I want to take the current value or nextvalue of the sequence in a java program. How can i do this? can anybody please explain me? Thank you so much.
-
Hi gurus I have created a Multiprovider taking the fields from two InfoCubes and One ODS.The data is populated and is available for Reporting,When i generate the query I can,t see the Ods Data in report.Please help me out. Thanks Kiran