Email using Data

Is the BB always connected to the internet?   Is it always using data?     my previouse phone, i had to push an email button to connect so then i could log off and i knew i wasnt using data.      Does it only use data once you push the email, browser, etc buttons?
Thanks alot
Solved!
Go to Solution.

Techinically, yes it is. The BlackBerry does 'ping' the cell towers and network every so often to make sure it still there. However it is not constantly connected. Some third party apps are set to check every so often for updates, like the Facebook or Twitter app. Email is different, it is sent instantly when you press Send, and email is pushed to your device on a regular basis, instantly or on a routine schedule according to the type of email server you have.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Stuck forwarded email using data

    Hi
    We have moved from Blackberry to Iphone 5 and the Exchange support is very poor on the Iphone, we currently have an issue that forwarding an email with an attachment can get stuck (you do not see it in the outbox but get a message at the bottom saying sending). The net result of teh stuck email is that it can easily use up your data allowance. Is there a fix for this issue, so far I have come across posts saying turn Airplane mode on and then off which does allow the email to go. The issue is the user may not know that an important email is stuck.
    The other features missing are the aility to set out of office which can be done with Blackberry and Android devices without issues.
    Thanks
    Sohail

    Techinically, yes it is. The BlackBerry does 'ping' the cell towers and network every so often to make sure it still there. However it is not constantly connected. Some third party apps are set to check every so often for updates, like the Facebook or Twitter app. Email is different, it is sent instantly when you press Send, and email is pushed to your device on a regular basis, instantly or on a routine schedule according to the type of email server you have.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Bug: iOS 5 using data in email app when connected to wifi. Has anyone else had this problem?

    Since I have received my new iPhone 4s I have constantly been going over my data every month. I only get 200mb. Normally I only used 20-50 tops if I used heavily with out wifi. After trying different application, and resetting the usage meter under settings. I noticed that when connected to wifi it uses data when checking for email, pushing and sending and recieving email. I've reset restored etc. nothing fixes it.

    WiFi *should* take precedence in my opinion, however it does not.  This was just confirmed to me by a supervisor at the VWZ call center.  i received a notice that i was going to be charged an overage fee due to going over the data plan i have on the iPad2.  However, this particular iPad has not been out of my house, nor away from my WiFi network all month.  When i called verizon, they confirmed that even though the ipad is connected to my wifi network, as long as 'Cellular Data' toggle is set to on, it will use that network first.
    No need for this to be the case, other than for Verizon to be able to make incremental revenue on their data plan!

  • Iphone 4s stolen. Selected remote wipe via Icloud. Received email hours later saying it was happening. Here's the problem: according to Verizon, the phone is still using data. How is this possible? Wouldn't the user have to register the device with Apple?

    So, if a remote wipe occurred as the email stated, how did the person with the phone immediately go back to using the data on the phone.  Wouldn't the person have to register the Iphone through Itunes?  I got the email saying the erase was happening at 11:10.  Looking at my cellular data usage, the phone began using data about that time after about a 12 hour break. So it seems like Find my Iphone quickly picked up the phone.  But then the phone continued using data for about 3 more hours.  How could the person be using the phone if it had just been wiped?

    I understand that iCloud's erase function is totally distinct from Verizon's cellular service (i.e. the phone could be wiped and Verizon would never know).  It's been a while since I've activated an Iphone through Itunes, but when you activate the phone don't you have to register it?  If the iPhone was wiped at 11:10, how could it be using data at 11:15 and consistently for the next three hours.  How long does the Itunes registration process take?

  • No email attachments to Document library when using data driven subscriptions

    We have recently migrated to SharePoint 2013 and setup document libraries to publish reports to.
    When we send an email with an attachment to the document library from a users mailbox, the document library acts as expected and detaches the email and publishes it to a subfolder inside the library. However when we schedule reports using data driven subscriptions
    and add the email address as a CC, the subfolder gets created but there is no attachment.
    What could cause this issue?
    Thanks for your time

    Hi WFN_Will,
    regarding this issue, we don't know for sure, unless we trace the process,
    do the attachment is not there, or when the attachment there the process was failed, or the target not able to receive the attachment?
    from the description, seems the target and the process of receiving the attachment is ok, I guess you can start to check from this part:
    https://sharepointstuff.codeplex.com/workitem/2894
    http://msdn.microsoft.com/en-us/library/ms154050.aspx
    http://technet.microsoft.com/en-us/library/ms159150.aspx
    http://technet.microsoft.com/en-us/library/cc262947.aspx
    http://manomangaldas.blogspot.in/2008/04/send-email-with-attachments-in.html
    to ensure that the attachment is there.
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • 8130 could send a text mesage to Email using NO DATA ?

    Hi All
    I recently lost my old 8130 Pearl. Bought a 9320 to replace it only to find that the this new phone will not send an "text" message as an email using No Data !   Small detail.. I know,  but very  convenient.  That phone was on the most basic voice & text plan with no data. How come the 8130 could send a text message to  a email  using no data?  and what is this feature called.  Is there another Blackberry phone that have this capability?
    Thank you
    my9320

    Hello my9320
    Welcome to the BlackBerry Support Community Forums.
    In order to send an SMS message to an Email address please follow the below steps found in www.blackberry.com/btsc/KB26662
    BlackBerry® Smartphone users can send SMS messages to some email address depending upon the Wireless service provider.
    1. Open BlackBerry Text Messages.
    2. Press the Menu key and click Compose Text Message.
    3. Type the recepient’s email address and Type the message.
    Note: As the user type, the number of characters has been typed appears in the upper right corner of the screen. SMS messages are limited to 160 characters.
    4. Press the Menu key and click Send.
    Please contact the wireless provider for resolvable email address regarding sending SMS to email address.
    Goose947
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Reg : Issue for Sending of external email using SO_OBJECT_SEND

    There is one issue while sending external email using SO_OBJECT_SEND functional module.
    1. The body of the mail is also included as attachment.
    I want to avoid the same.
    Please anyone can give the solution.

    hi check this example ,
    Sending mail with attachment report in Background
    Content Author: Fernando Faian
    I have read the hint about "Sending mail with attachment report".
    It's great, but how can I make this function work in background??
    I had that needed last year too. See attachment a function group with two functions. The second one has that functionality to send email or fax (SAP office) with attachment objects in background job using SO_ATTACHMENT_INSERT function. 
    Pay attention because it’s working with output list from spool converted to pdf. 
    =================================================================================
    z_send_email_fax_global
    FUNCTION-POOL z_gfaian_mail_fax.            "MESSAGE-ID ..
    WORK TABLE AREAS
    TABLES: tsp01.
    INTERNAL TABLES
    DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
          lt_note_text   LIKE STANDARD TABLE OF soli  WITH HEADER LINE,
          lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
    DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
          lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
    DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
    TYPES: BEGIN OF y_files,
           file(60) TYPE c,
           END OF y_files.
    DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
    DATA: l_objcont     LIKE soli OCCURS 0 WITH HEADER LINE.
    DATA: l_objhead     LIKE soli OCCURS 0 WITH HEADER LINE.
    STRUCTURES
    DATA: folder_id      LIKE soodk,
          object_id      LIKE soodk,
          link_folder_id LIKE soodk,
          g_document     LIKE sood4,
         g_header_data  LIKE sood2,
          g_folmem_data  LIKE sofm2,
          g_header_data  LIKE sood2,
          g_receive_data LIKE soos6,
          g_ref_document LIKE sood4,
          g_new_parent   LIKE soodk,
          l_folder_id    LIKE sofdk,
          v_email(50).
    DATA: hd_dat  like sood1.
    VARIABLES
    DATA: client  LIKE tst01-dclient,
          name    LIKE tst01-dname,
          objtype LIKE rststype-type,
          type    LIKE rststype-type.
    DATA: numbytes TYPE i,
          arc_idx LIKE toa_dara,
          pdfspoolid LIKE tsp01-rqident,
          jobname LIKE tbtcjob-jobname,
          jobcount LIKE tbtcjob-jobcount,
          is_otf.
    DATA: outbox_flag LIKE sonv-flag VALUE 'X',
          store_flag  LIKE sonv-flag,
          delete_flag LIKE sonv-flag,
          owner       LIKE soud-usrnam,
          on          LIKE sonv-flag VALUE 'X',
          sent_to_all LIKE sonv-flag,
          g_authority LIKE sofa-usracc,
          w_objdes    LIKE sood4-objdes.
    DATA: c_file LIKE rlgrap-filename,
          n_spool(6) TYPE n.
    DATA: cancel.
    DATA: desired_type  LIKE sood-objtp,
          real_type LIKE sood-objtp,
          attach_type LIKE sood-objtp,
          otf LIKE sood-objtp VALUE 'OTF', " SAPscript Ausgabeformat
          ali LIKE sood-objtp VALUE 'ALI'. " ABAP lists
    CONSTANTS
    CONSTANTS: ou_fol LIKE sofh-folrg              VALUE 'O',
               c_objtp    LIKE g_document-objtp    VALUE 'RAW',
               c_file_ext LIKE g_document-file_ext VALUE 'TXT'.
    =================================================================================
    z_send_email_fax2
    FUNCTION z_faian_mail_fax2.
    ""Interface local:
    *"  IMPORTING
    *"     REFERENCE(SRC_SPOOLID) LIKE  TSP01-RQIDENT
    *"     REFERENCE(FAX_MAIL_NUMBER) TYPE  SO_NAME
    *"     REFERENCE(HEADER_MAIL) TYPE  SO_OBJ_DES
    *"     REFERENCE(OBJECT_TYPE) TYPE  SO_ESCAPE
    *"  TABLES
    *"      LT_BODY_EMAIL STRUCTURE  SOLI
    *"  EXCEPTIONS
    *"      ERR_NO_ABAP_SPOOLJOB
    Fist part: Verify if the spool really exists
      SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
      IF sy-subrc NE 0.
        RAISE err_no_abap_spooljob. "doesn't exist
      ELSE.
        client = tsp01-rqclient.
        name   = tsp01-rqo1name.
        CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
             EXPORTING
                  authority     = 'SP01'
                  client        = client
                  name          = name
                  part          = 1
             IMPORTING
                  type          = type
                  objtype       = objtype
             EXCEPTIONS
                  fb_error      = 1
                  fb_rsts_other = 2
                  no_object     = 3
                  no_permission = 4
                  OTHERS        = 5.
        IF objtype(3) = 'OTF'.
          desired_type = otf.
        ELSE.
          desired_type = ali.
        ENDIF.
        CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
             EXPORTING
                  rqident              = src_spoolid
                  desired_type         = desired_type
             IMPORTING
                  real_type            = real_type
             TABLES
                  buffer               = l_objcont
             EXCEPTIONS
                  no_such_job          = 14
                  type_no_match        = 94
                  job_contains_no_data = 54
                  no_permission        = 21
                  can_not_access       = 21
                  read_error           = 54.
        IF sy-subrc EQ 0.
          attach_type = real_type.
        ENDIF.
        CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
             EXPORTING
                  owner     = sy-uname
                  region    = ou_fol
             IMPORTING
                  folder_id = l_folder_id
             EXCEPTIONS
                  OTHERS    = 5.
    fill out informations about the header of the email
        CLEAR: g_document.
        g_document-foltp     = l_folder_id-foltp.
        g_document-folyr     = l_folder_id-folyr.
        g_document-folno     = l_folder_id-folno.
        g_document-objtp     = c_objtp.
        g_document-objdes    = header_mail.
        g_document-file_ext  = c_file_ext.
        g_header_data-objdes    = header_mail.
        CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
             EXPORTING
                  method      = 'SAVE'
                  office_user = sy-uname
             IMPORTING
                  authority   = g_authority
             TABLES
                  objcont     = lt_body_email
                  attachments = lt_attachments
             CHANGING
                  document    = g_document
                  header_data = g_header_data
             EXCEPTIONS
                  OTHERS      = 1.
        folder_id-objtp = l_folder_id-foltp.
        folder_id-objyr = l_folder_id-folyr.
        folder_id-objno = l_folder_id-folno.
        object_id-objtp = c_objtp.
        object_id-objyr = g_document-objyr.
        object_id-objno = g_document-objno.
        link_folder_id-objtp = l_folder_id-foltp.
        link_folder_id-objyr = l_folder_id-folyr.
        link_folder_id-objno = l_folder_id-folno.
        REFRESH lt_rec_tab.
       CLEAR lt_rec_tab.
       lt_rec_tab-sel        = 'X'.
       lt_rec_tab-recesc     = object_type.   "This field for FAX/MAIL
       lt_rec_tab-recnam     = 'U-'.
       lt_rec_tab-deliver    = 'X'.
       lt_rec_tab-not_deli   = 'X'.
       lt_rec_tab-read       = 'X'.
       lt_rec_tab-mailstatus = 'E'.
       lt_rec_tab-adr_name   = fax_mail_number.
       lt_rec_tab-sortfield  = fax_mail_number.
       lt_rec_tab-recextnam  = fax_mail_number.
       lt_rec_tab-sortclass  = '5'.
       APPEND lt_rec_tab.
          lt_rec_tab-recextnam = fax_mail_number.
          lt_rec_tab-recesc = object_type.
          lt_rec_tab-sndart = 'INT'.
          lt_rec_tab-sndpri = 1.
          APPEND lt_rec_tab.
        lt_files-file = c_file.
        APPEND lt_files.
    begin of insertion by faianf01
        hd_dat-objdes = header_mail.
        CALL FUNCTION 'SO_ATTACHMENT_INSERT'
             EXPORTING
                  object_id                  = object_id
                  attach_type                = attach_type
                  object_hd_change           = hd_dat
                  owner                      = sy-uname
             TABLES
                  objcont                    = l_objcont
                  objhead                    = l_objhead
             EXCEPTIONS
                  active_user_not_exist      = 35
                  communication_failure      = 71
                  object_type_not_exist      = 17
                  operation_no_authorization = 21
                  owner_not_exist            = 22
                  parameter_error            = 23
                  substitute_not_active      = 31
                  substitute_not_defined     = 32
                  system_failure             = 72
                  x_error                    = 1000.
        IF sy-subrc > 0.
        ENDIF.
    end of insertion by faianf01
    send email from SAPOFFICE
        CALL FUNCTION 'SO_OBJECT_SEND'
             EXPORTING
                  folder_id                  = folder_id
                  object_id                  = object_id
                  outbox_flag                = outbox_flag
                  link_folder_id             = link_folder_id
                  owner                      = sy-uname
                 check_send_authority       = 'X'
             TABLES
                  receivers                  = lt_rec_tab
                 note_text                  = lt_note_text
             EXCEPTIONS
                  active_user_not_exist      = 35
                  communication_failure      = 71
                  component_not_available    = 1
                  folder_no_authorization    = 5
                  folder_not_exist           = 6
                  forwarder_not_exist        = 8
                  object_no_authorization    = 13
                  object_not_exist           = 14
                  object_not_sent            = 15
                  operation_no_authorization = 21
                  owner_not_exist            = 22
                  parameter_error            = 23
                  substitute_not_active      = 31
                  substitute_not_defined     = 32
                  system_failure             = 72
                  too_much_receivers         = 73
                  user_not_exist             = 35.
      ENDIF.
    ENDFUNCTION.
    =================================================================================
    z_send_email_fax
    FUNCTION ZCBFS_SEND_MAIL.
    ""Interface local:
    *"  IMPORTING
    *"     REFERENCE(SRC_SPOOLID) LIKE  TSP01-RQIDENT
    *"     REFERENCE(HEADER_MAIL) TYPE  SO_OBJ_DES
    *"  TABLES
    *"      LIST_FAX_MAIL_NUMBER STRUCTURE  SOLI
    *"  EXCEPTIONS
    *"      ERR_NO_ABAP_SPOOLJOB
      DATA: vg_achou(1) TYPE n.
    Fist part: Verify if the spool really exists
      vg_achou = 1.
      DO 60 TIMES.
        SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
        IF sy-subrc IS INITIAL.
          CLEAR vg_achou.
          EXIT.
        ELSE.
          WAIT UP TO 1 SECONDS.
        ENDIF.
      ENDDO.
      IF vg_achou = 1.
        RAISE err_no_abap_spooljob. "doesn't exist
      ENDIF.
      client = tsp01-rqclient.
      name   = tsp01-rqo1name.
      CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
           EXPORTING
                authority     = 'SP01'
                client        = client
                name          = name
                part          = 1
           IMPORTING
                type          = type
                objtype       = objtype
           EXCEPTIONS
                fb_error      = 1
                fb_rsts_other = 2
                no_object     = 3
                no_permission = 4
                OTHERS        = 5.
      IF objtype(3) = 'OTF'.
        desired_type = otf.
      ELSE.
        desired_type = ali.
      ENDIF.
      CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
           EXPORTING
                rqident              = src_spoolid
                desired_type         = desired_type
           IMPORTING
                real_type            = real_type
           TABLES
                buffer               = l_objcont
           EXCEPTIONS
                no_such_job          = 14
                type_no_match        = 94
                job_contains_no_data = 54
                no_permission        = 21
                can_not_access       = 21
                read_error           = 54.
      IF sy-subrc EQ 0.
        attach_type = real_type.
      ENDIF.
      CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
           EXPORTING
                owner     = sy-uname
                region    = ou_fol
           IMPORTING
                folder_id = l_folder_id
           EXCEPTIONS
                OTHERS    = 5.
    fill out informations about the header of the email
      CLEAR: g_document.
      g_document-foltp     = l_folder_id-foltp.
      g_document-folyr     = l_folder_id-folyr.
      g_document-folno     = l_folder_id-folno.
      g_document-objtp     = c_objtp.
      g_document-objdes    = header_mail.
      g_document-file_ext  = c_file_ext.
      g_header_data-objdes    = header_mail.
      CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
           EXPORTING
                method      = 'SAVE'
                office_user = sy-uname
           IMPORTING
                authority   = g_authority
           TABLES
                attachments = lt_attachments
           CHANGING
                document    = g_document
                header_data = g_header_data
           EXCEPTIONS
                OTHERS      = 1.
      folder_id-objtp = l_folder_id-foltp.
      folder_id-objyr = l_folder_id-folyr.
      folder_id-objno = l_folder_id-folno.
      object_id-objtp = c_objtp.
      object_id-objyr = g_document-objyr.
      object_id-objno = g_document-objno.
      link_folder_id-objtp = l_folder_id-foltp.
      link_folder_id-objyr = l_folder_id-folyr.
      link_folder_id-objno = l_folder_id-folno.
      REFRESH lt_rec_tab.
      LOOP AT LIST_FAX_MAIL_NUMBER.
        lt_rec_tab-recextnam = LIST_FAX_MAIL_NUMBER-LINE.
        lt_rec_tab-recesc = 'U'.
        lt_rec_tab-sndart = 'INT'.
        lt_rec_tab-sndpri = 1.
        APPEND lt_rec_tab.
      ENDLOOP.
      lt_files-file = c_file.
      APPEND lt_files.
      hd_dat-objdes = header_mail.
      CALL FUNCTION 'SO_ATTACHMENT_INSERT'
           EXPORTING
                object_id                  = object_id
                attach_type                = attach_type
                object_hd_change           = hd_dat
                owner                      = sy-uname
           TABLES
                objcont                    = l_objcont
                objhead                    = l_objhead
           EXCEPTIONS
                active_user_not_exist      = 35
                communication_failure      = 71
                object_type_not_exist      = 17
                operation_no_authorization = 21
                owner_not_exist            = 22
                parameter_error            = 23
                substitute_not_active      = 31
                substitute_not_defined     = 32
                system_failure             = 72
                x_error                    = 1000.
      IF sy-subrc > 0.
      ENDIF.
    send email from SAPOFFICE
      CALL FUNCTION 'SO_OBJECT_SEND'
           EXPORTING
                folder_id                  = folder_id
                object_id                  = object_id
                outbox_flag                = outbox_flag
                link_folder_id             = link_folder_id
                owner                      = sy-uname
           TABLES
                receivers                  = lt_rec_tab
                note_text                  = lt_note_text
           EXCEPTIONS
                active_user_not_exist      = 35
                communication_failure      = 71
                component_not_available    = 1
                folder_no_authorization    = 5
                folder_not_exist           = 6
                forwarder_not_exist        = 8
                object_no_authorization    = 13
                object_not_exist           = 14
                object_not_sent            = 15
                operation_no_authorization = 21
                owner_not_exist            = 22
                parameter_error            = 23
                substitute_not_active      = 31
                substitute_not_defined     = 32
                system_failure             = 72
                too_much_receivers         = 73
                user_not_exist             = 35.
    ENDFUNCTION.
    =================================================================================
    regards,
    venkat.

  • Sending email using UTL_SMTP

    Dear experts,
    I am trying to send an email using UTL_SMTP (i switched from UTL_MAIL to UTL_SMTP since i need to send mails with large attachments - BLOB). I am using the demo_mail package given here:
    http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
    While running the program I am getting an error message (from the error.log) saying:
    [Mon Aug 04 14:00:21 2008] [error] [client 192.168.0.7] mod_plsql: /ns/email_p.send HTTP-404 ORA-29279: SMTP permanent error: 530 5.7.0 Must issue a STARTTLS command first. 9sm12723808qbw.6\nORA-06512: at "SYS.UTL_SMTP", line 20\nORA-06512: at "SYS.UTL_SMTP", line 98\nORA-06512: at "SYS.UTL_SMTP", line 221\nORA-06512: at "NEXTSTEP.SEND_EMAIL_HELPER", line 258\nORA-06512: at "NEXTSTEP.SEND_EMAIL_HELPER", line 119\nORA-06512: at "NEXTSTEP.EMAIL_P", line 33\nORA-06512: at line 31\n, referer: file:///C:/Documents and Settings/Mayank/My Documents/Flex Builder 3/ns5/bin-debug/main.swf
    My code is as follows:
    PACKAGE DECLARATION. This is the DEMO_MAIL package posted under above link (I have renamed it).
    CREATE OR REPLACE PACKAGE NEXTSTEP.send_email_helper IS
      ----------------------- Customizable Section -----------------------
      -- Customize the SMTP host, port and your domain name below.
        smtp_host   VARCHAR2(256) := 'smtp.gmail.com';
        smtp_port   PLS_INTEGER   := 587;
        smtp_domain VARCHAR2(256) := null;
      -- Customize the signature that will appear in the email's MIME header.
      -- Useful for versioning.
      MAILER_ID   CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
      --------------------- End Customizable Section ---------------------
      -- A unique string that demarcates boundaries of parts in a multi-part email
      -- The string should not appear inside the body of any part of the email.
      -- Customize this if needed or generate this randomly dynamically.
      BOUNDARY        CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
      FIRST_BOUNDARY  CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
      LAST_BOUNDARY   CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
                                                  utl_tcp.CRLF;
      -- A MIME type that denotes multi-part email (MIME) messages.
      MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
                                                      BOUNDARY || '"';
      MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER   := 76 / 4 * 3;
      -- A simple email API for sending email in plain text in a single call.
      -- The format of an email address is one of these:
      --   someone@some-domain
      --   "Someone at some domain" <someone@some-domain>
      --   Someone at some domain <someone@some-domain>
      -- The recipients is a list of email addresses  separated by
      -- either a "," or a ";"
      PROCEDURE mail(sender     IN VARCHAR2,
             recipients IN VARCHAR2,
             subject    IN VARCHAR2,
             message    IN VARCHAR2);
      -- Extended email API to send email in HTML or plain text with no size limit.
      -- First, begin the email by begin_mail(). Then, call write_text() repeatedly
      -- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
      -- email in non-ASCII or multi-byte character set. End the email with
      -- end_mail().
      FUNCTION begin_mail(sender     IN VARCHAR2,
                  recipients IN VARCHAR2,
                  subject    IN VARCHAR2,
                  mime_type  IN VARCHAR2    DEFAULT 'text/plain',
                  priority   IN PLS_INTEGER DEFAULT NULL)
                  RETURN utl_smtp.connection;
      -- Write email body in ASCII
      PROCEDURE write_text(conn    IN OUT NOCOPY utl_smtp.connection,
                   message IN VARCHAR2);
      -- Write email body in non-ASCII (including multi-byte). The email body
      -- will be sent in the database character set.
      PROCEDURE write_mb_text(conn    IN OUT NOCOPY utl_smtp.connection,
                  message IN            VARCHAR2);
      -- Write email body in binary
      PROCEDURE write_raw(conn    IN OUT NOCOPY utl_smtp.connection,
                  message IN RAW);
      -- APIs to send email with attachments. Attachments are sent by sending
      -- emails in "multipart/mixed" MIME format. Specify that MIME format when
      -- beginning an email with begin_mail().
      -- Send a single text attachment.
      PROCEDURE attach_text(conn         IN OUT NOCOPY utl_smtp.connection,
                data         IN VARCHAR2,
                mime_type    IN VARCHAR2 DEFAULT 'text/plain',
                inline       IN BOOLEAN  DEFAULT TRUE,
                filename     IN VARCHAR2 DEFAULT NULL,
                    last         IN BOOLEAN  DEFAULT FALSE);
      -- Send a binary attachment. The attachment will be encoded in Base-64
      -- encoding format.
      PROCEDURE attach_base64(conn         IN OUT NOCOPY utl_smtp.connection,
                  data         IN RAW,
                  mime_type    IN VARCHAR2 DEFAULT 'application/octet',
                  inline       IN BOOLEAN  DEFAULT TRUE,
                  filename     IN VARCHAR2 DEFAULT NULL,
                  last         IN BOOLEAN  DEFAULT FALSE);
      -- Send an attachment with no size limit. First, begin the attachment
      -- with begin_attachment(). Then, call write_text repeatedly to send
      -- the attachment piece-by-piece. If the attachment is text-based but
      -- in non-ASCII or multi-byte character set, use write_mb_text() instead.
      -- To send binary attachment, the binary content should first be
      -- encoded in Base-64 encoding format using the demo package for 8i,
      -- or the native one in 9i. End the attachment with end_attachment.
      PROCEDURE begin_attachment(conn         IN OUT NOCOPY utl_smtp.connection,
                     mime_type    IN VARCHAR2 DEFAULT 'text/plain',
                     inline       IN BOOLEAN  DEFAULT TRUE,
                     filename     IN VARCHAR2 DEFAULT NULL,
                     transfer_enc IN VARCHAR2 DEFAULT NULL);
      -- End the attachment.
      PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   last IN BOOLEAN DEFAULT FALSE);
      -- End the email.
      PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
      -- Extended email API to send multiple emails in a session for better
      -- performance. First, begin an email session with begin_session.
      -- Then, begin each email with a session by calling begin_mail_in_session
      -- instead of begin_mail. End the email with end_mail_in_session instead
      -- of end_mail. End the email session by end_session.
      FUNCTION begin_session RETURN utl_smtp.connection;
      -- Begin an email in a session.
      PROCEDURE begin_mail_in_session(conn       IN OUT NOCOPY utl_smtp.connection,
                      sender     IN VARCHAR2,
                      recipients IN VARCHAR2,
                      subject    IN VARCHAR2,
                      mime_type  IN VARCHAR2  DEFAULT 'text/plain',
                      priority   IN PLS_INTEGER DEFAULT NULL);
      -- End an email in a session.
      PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
      -- End an email session.
      PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
    END;How should I solve the above error? Can anyone help me with my query please?
    If I add the code to start TLS it still gives me an error. If I add the code
    utl_smtp.command(conn,'STARTTLS');
    utl_smtp.helo(conn, smtp_domain);
    under email_sender_help package just before under begin_session function, it gives me an error saying:
    ORA-29279: SMTP permanent error: 503 5.5.1 EHLO/HELO first. s27sm2097329qbs.12
    So then if i enter the same code after:
    utl_smtp.command(conn,'STARTTLS');
    utl_smtp.helo(conn, smtp_domain);
    It gives me an error:
    ORA-29278: SMTP transient error: 421 Service not available
    Message was edited by:
    Monk
    Message was edited by:
    Monk

    look like rely turned off on the server..
    check this.. or ask your network guys..
    Go to Control Panel->Add or Remove Programs->Click on
    Add/Remove Wndows Components
    Check IIS check box.
    Select Internet Information Service (IIS) option and click on Details button
    Check whether SMTP Service is checked or not.
    If not selected then select SMTP check box.
    This process should be done on server.
    It will help out from ORA-29278: SMTP transient error: 421 Service not available problem.
    thanks

  • Issue to send email (using sp_send_dbmail) with an attachement located in other server within the same network

    I have two servers. One is for databases (DB) with the mail server configured and the other is for SSIS without mail server. Both servers are in the same network. On the SSIS server the SSIS package exports data from the DB server table
    to xls file. The file is saved in SSIS server. When I created a task to send the email (using sp_send_dbmail) to attach that file, I got the error message:
    Error: Executing the query "EXECUTE [msdb].[dbo].[sp_send_dbmail]
     @profile_na..." failed with the following error: "Attachment file H:\test.xls is invalid.".
    Any help will be appreciated. Thanks.
    A Fan of SSIS, SSRS and SSAS

    Where are you running this?
    If its in the other server (DB) you need to use UNC path to the SSIS server folder where file resides
    Also the executing account should have access to the folder as well as the file. So If you're running this from a job make sure you either provider folder and file access to sql agent job service account or create a separate proxy account with the required
    permissions and configure the job to use the account
    see
    http://www.databasejournal.com/features/mssql/article.php/3789881/Proxy-Accounts-in-SQL-Server.htm
    http://www.codeproject.com/Articles/28918/SQL-Server-Agent-Proxy
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • I have BIS but can't surf, send/receive email, use apps

    i have BB Curve 8520. My BIS was running smoothly (sending and receiving emails real time and surfing the net through BIS), until i noticed when i tried to reply to an email that came in, it won't send. i noticed that it's fluctuating. i was able to send the email after a few minutes... then a few minutes later, i received a replied email from my friend, and when i tried to send my reply, i wasn't able to. also, i can't surf using the browser with the "internet browser" as default. i tried using my wifi and then suddenly all my emails started coming in, all emails that were not able to go through hours ago. my big question was why do i need to turn on wifi just to receive emails. but since i had my BIS for 2 months now, i can send and receive emails and surf through BIS itself without turning on the wifi.  also, i can't use any of my apps like facebook, twitter, yahoo messenger, etc.  They used to work fine with BIS... but now, i have to turn on the wifi connection, so i could log in with them.  aren't these supposed to be running through BIS only?
    I have GPRS on top, not gprs. my carrier says i have active data plan/BIS. but under Services Status..it says Blackberry Internet Service:  Connection:  not connected...
    so, i wiped out my BB and deleted all third party apps. when this was done, i received emails telling me "Your handheld has been registered with the wireless network" and even got "Activation Server" emails telling me that the emails that i have previously set up are now up and running. so i thought my BB is now ok.. i tried surfing, it was okay. after like about 5 minutes, it was down again. tried sending email but can't... i turned on the wifi and boom! the emails started coming in again.i have the Host Routing Tables and my Service Books in my BB. I have GPRS (not gprs) on top which means i have active BIS.  i have registered my HRTs several times... and resending my service books... same thing...
    the big mystery is when i turn on the wifi, the emails suddenly go through and i can send emails. i can open apps that used to only run on BIS. this is ok i guess, but i could never do any of these if i'm not connected to wifi.
    my sister and i have the same BB... i removed my sim and inserted it to her BB and the BIS worked fine... i was able to surf and use apps.. but when i put my sim back on my phone, the problem still exists.  i even used a different sim card that is also subscribed to BIS/data plan, and it still has the same problem... my guess is my carrier is right that my data plan is working ok and that my handheld itself has the problem... 
    i updated my OS, same problem.. wiped it out... used BBSAK, reinstalled OS... numerous battery pulls... same thing... i can receive the HRTs and service books, but after that can't do anything else like i used to... (send/receive emails, use apps like facebook, twitter, ym, etc., can't surf with internet browser - except when wifi is on everything else work fine even emails and apps).. 
    i would really appreciate your help guys.. thanks!

    Hi tarifiq and welcome to the BlackBerry Support Community Forums!
    Can you send me a private message with your PIN so I can check this out for you?
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • IPhone 5 using data all the time

    My husband has had his iPhone 5 for a couple of weeks.  We have Verizon 300 mb plan, as he is mainly just using it for calls and text.  But it is using data all the time!  Today our online Verizon account is showing 59 episodes of data usage.  They are small, but still, why are they there?  All he has done is call and text.  He would like to keep the cellular data on because he texts by talking to it.  He did not send anything close to 59 texts.n was not on the Internet.
    We have turned off practically everything.  Location services, stocks, weather, email, notifications for everything except text and calls.  Stopped it from sending data to Apple.  He has added only 4 apps- cam wow, talking bird, talking cat, and free cell solitaire.  Not signed in for iCloud or Facebook or anything.

    Is Digi a CDMA carrier? or is it GSM/UTMS?
    If CDMA, that's normal. The technology was not designed for data and calling.
    If its GSM, give them a call to seek resolution.

  • Why do i keep getting 'to use data on your phone,you'l need add on pack' texts?

    I ordered a pay as you go sim card from EE a few weeks ago to use in my iphone 5 as a second/work phone. The package on the sim is a 'top up £1 and get some free mins and texts (no data allowance)' plan. I put the sim card in my phone and have left the phone at home and not put any credit on it yet or used it at all, ( not even any apps/calls etc ). Every day when i come to look at the phone there are atleast 4 text messages a day from EE saying 'To use data on your phone, you'll need an add-on pack Click here to buy'. I am getting sick of this as i have turned mobile data off in the settings and my phone is constantly connected to my home wi-fi so cannot see how it would even by using any data. Today i have come home to 8 of these messages! I refuse to top my phone up with credit and start using it until this is sorted as im not paying for any data usage i wont use! There are no apps running in the background, and nothing has been set up on the phone that would require internet usage i.e. emails / weather etc. Please can someone help me...  Thanks

    Hi,  I also recieved thousands of messages saying that I need to buy add-on, that's anoying.  I called EE for 3 hours and they are not able to deal with that. They just try to make my mobile phone responsible. What can I do?  Thank you.

  • Can I send emails by date?

    Can I send emails by date?
    This is what I can do using Eudora. In Eudora, I can set the date I want the email to be sent.

    you can use cron to run a script, or iCal can run a script, or I'd expect AppleScript could be used.
    The bash script you'd use would look something like this:
    cat msgtextfile.txt | mail -s "Subject" [email protected]
    Or you could find a mail client tool or mail client extension that queues the mail, akin to the way Eudora worked for you. Thunderbird has an add-on known as SendTools (0.4.1) that can be of interest here, as it adds a send date to the message compose window.

  • What exactly is using data and how can i keep it from using data when im not using my phone?

    So i have an iphone 4 and i have used a lot of data this month(like almost 2GB) and i have barely touched my phone outside of wifi areas. I always shut down any apps that use data like youtube, funnypics, facebook, etc. but i do play some games during my breaks at work but they dont require data to play so to my knowledge those games arent using data(or are they?) i just need some help figuring out exactly what on my phone is using data all the time so i can turn it off. Is it icloud? Emails on auto update? Offline game apps(minecraft, sonic dash, the Mr. Series games?) Do all apps use data regardless? Somebody please answer me. And No im not buying a bigger data plan. 2GB is my limit but it seems as though i am hitting that easily with my iphone but the rest of my familyis usually miles away from 2GB and they all have Samsung Galaxy S4s.

    My first stop would be in Settings > Cellular if you are on iOS 7.  This has a lot of goodstuff. you can turn off cellular data as a who, see your current usage and even see which apps have used data and how much.  You can even turn off individual apps form using cellular data (restricting them to wifi only).
    I hope this helps!

  • Oracle soa 11.1.1.4 html email using email activity

    Experts,
    In one of my process i am generating tabular form content in email using html tags in transform xsl file and passing this xsl using ora:processXSLT funtion to contentbody variable of email activity. This works fine in *11.1.1.1* i am able to see email with tabular form content but *11.1.1.4* i am getting an email without content.
    In 11.1.1.4 if i pass some simple string to the content body then its working fine i am able to see am email with that string and if i pass the transformation which is having html tags int it, its not working . I have no idea
    why the html tags are not getting recognizing in 11.1.1.4 email activity.
    Can someone please help me to solve this issue.
    Note: its working very goodl in 11.1.1.1.
    here how i am calling fine in bpel
    *<copy>*
    *<from expression="ora:processXSLT('xsl/GenerateHTML.xsl',bpws:getVariableData('ResponseOutput','/ns4:Response'))"/>*
    *<to variable="varNotificationReq" part="EmailPayload"*
    query="/EmailPayload/ns6:Content/ns6:ContentBody"/>
    *</copy*
    and here is my transformation GenerateHTML.xsl
    <?xml version="1.0" encoding="UTF-8" ?>
    <xsl:stylesheet version="1.0" xmlns:ns0="http://www.oracle.com/mgSOA"
    xmlns:xpath20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
    xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
    xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
    xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
    xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns:med="http://schemas.oracle.com/mediator/xpath"
    xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
    xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
    xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:ora="http://schemas.oracle.com/xpath/extension"
    xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
    xmlns:sample="http://www.oracle.com/XSL/Transform/java/oracle.sample.SampleExtensionFunctions"
    xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
    exclude-result-prefixes="xsi xsl ns0 xsd xpath20 bpws mhdr oraext dvm hwf med ids xdk xref ora socket sample ldap">
    <xsl:output method="html" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
    <xsl:text disable-output-escaping="yes">&lt;b&gt;s list &lt;/b&gt;</xsl:text>
    <xsl:text disable-output-escaping="yes">&lt;br&gt;</xsl:text>
    <xsl:text disable-output-escaping="yes">&lt;br&gt;</xsl:text>
    <table border="1">
    <tr bgcolor="#9acd32">
    <th width="80">EntityType</th>
    <th width="400">Organization name</th>
    <th width="100">Country</th>
    <th width="200">Code</th>
    <th width="200">Date</th>
    </tr>
    <ns0:Response>
    <xsl:for-each select="/ns0:Response/ns0:ResponseData">
    <tr>
    <ns0:ResponseData>
    <td width="80">
    <ns0:R_entitytype>
    <xsl:attribute name="xsi:nil">
    <xsl:value-of select="ns0:R_entitytype/@xsi:nil"/>
    </xsl:attribute>
    <xsl:value-of select="ns0:R_entitytype"/>
    </ns0:R_entitytype>
    </td>
    <td width="400">
    <ns0:R_orgname>
    <xsl:attribute name="xsi:nil">
    <xsl:value-of select="ns0:R_orgname/@xsi:nil"/>
    </xsl:attribute>
    <xsl:value-of select="ns0:R_orgname"/>
    </ns0:R_orgname>
    </td>
    <td width="100">
    <ns0:R_country>
    <xsl:attribute name="xsi:nil">
    <xsl:value-of select="ns0:R_country/@xsi:nil"/>
    </xsl:attribute>
    <xsl:value-of select="ns0:R_country"/>
    </ns0:R_country>
    </td>
    <td width="200">
    <ns0:R_Code>
    <xsl:attribute name="xsi:nil">
    <xsl:value-of select="ns0:R_Code/@xsi:nil"/>
    </xsl:attribute>
    <xsl:value-of select="ns0:R_Code"/>
    </ns0:R_Code>
    </td>
    <td width="200">
    <ns0:R_Date>
    <xsl:attribute name="xsi:nil">
    <xsl:value-of select="ns0:R_Date/@xsi:nil"/>
    </xsl:attribute>
    <xsl:value-of select="ns0:R_Date"/>
    </ns0:R_Date>
    </td>
    </ns0:ResponseData>
    </tr>
    </xsl:for-each>
    </ns0:Response>
    </table>
    <xsl:text disable-output-escaping="yes">&lt;br&gt;</xsl:text>
    <xsl:text disable-output-escaping="yes">&lt;br&gt;</xsl:text>
    </xsl:template>
    </xsl:stylesheet>

    Try using ora:toCDATA function, I had the same issue and this seemed to work.
    <copy>
    <from expression="ora:toCDATA(xdk:processXSLT('xsl/GenerateHTML.xsl',bpws:getVariableData('ResponseOutput','/ns4:Response')))"/>
    <to variable="varNotificationReq" part="EmailPayload"
    query="/EmailPayload/ns6:Content/ns6:ContentBody"/>
    </copy>

Maybe you are looking for

  • Daily working hours calculation but Half an hour flexi before start of planned time & shortfall hours calculation

    Dear All, I want to calculate daily working hours but Half an hour flexi before start of planned time & shortfall hours calculation if a person didn't completed 9 hours job. We have different types of DWS, PWS & WSR for different PS/PSA & EG/ESG grou

  • Photo Gallery: Looking For Suggestions

    Hi, all. I've been using JustSo PhotoAlbum quite happily for a few years and it continues to serve my needs well. One client, however, is requesting a gallery solution that would use JSPA-style popups, but with 'forward'- and 'back'-style navigationa

  • Two id's point to the same feed

    Hi, we are from Italy, and maybe someone here can help: The facts: We have since 2005 an audio podcast and we obtained from iTunes an ID linked to this feed: http://www.feltrinellieditore.it/fs/podcast-xml/fpodcast.xml In 2007 we opened a second podc

  • Multiple fields from array in one colum

    hi there, have started working in Flex 4 and quite enjoying it, I'm a designer with years of background in HTML-CSS and decided to shift to Flex. While testing on a DataGrid with an ArrayCollection as a data provider, I have a firstName and LastName

  • Garage Band Error Message - Library Invalid

    My Hard Drive burned out. I had a new one installed and all programs transfered over. Everything works but my GB. This is the message I get. Can anyone help? To the best of my knowledge GB came installed. I have OS X 10.4.10. The Instrument Library i