Email works but my browser fails - ideas?

My emails works fine, diagnostics says I am connected but 2 different browsers fail. Ideas?

Thank you but I have and use a MobileMe account and I am aware of the differences between IMAP, POP, and push services that use Exchange, etc.
In my 6+ months experience with my iPhone 3G, I have found Apple's own push service with MobileMe to be extremely flakey/inconsistent in visually displaying new email alerts in the Springboard or audibly notifying based on sound preferences. The same for fetch.
In fact, I sent myself a test message to my .me account as I wrote this message. Two minutes later, I still haven't heard an alert and the count of my new email messages is wrong in the Springboard.
But when I check my email on iPhone it is there.
Sometimes iPhone will have the proper count and give you the audible alert, but I find, especially if you haven't been using the phone, it often doesn't keep up and Apple's push services is not better than the fetch service for POP and IMAP.
What I am suggesting is that BECAUSE the MAIL PUSH service is still a work in progress they haven't rolled out access to push notification for 3rd party developers.
The best way to know if you have new mail on an iPhone is to open the Mail app and manually check each of your accounts.
Email account aggregation would be nice too but that's another discussion

Similar Messages

Having trouble with sound on my iphone 3gs ringtones work but ipod doesnt any ideas?

having trouble with sound on my iphone 3gs ringtones work but ipod doesnt any ideas? have tried resetting cleaning earphone dock and still not working

Same here, I get no sound from videos, text messages. This happens for a while, then it works again then it doesn't work. When I go to settings, my "change with buttons" is on but buttons don't work. I have restored it but there is no change. Here is a picture of my screen when i try to change volume.

Scan to email: get pin so email working but don't get scan

set up email account ok and get 4 digit pin via this email.
When I scan to email it says email sent but nothing received at all.

Hello @Octothorpe47,
Welcome to the HP forums.
I understand that you are not recieving the scans that are sent to your email.
I would like to help.
Scan to email does have a file size limit. If it is a large document you may have to send it as two.
Are you getting any messages from the printer?
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

RMAN 9.2.0.4 to 10.2.0.3 - restore/recovery worked but OPEN RESTLOGS Failed

Hi,
I have taken the RMAN backup from 9.2.0.4 database - moved to another server having 10.2.0.3. RMAN restore/recovery (incomplete) worked but database got terminated during "ALTER DATABASE OPEN RESETLOGS;".
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Fri Oct 26 14:49:23 2007
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Fri Oct 26 14:49:23 2007
Errors in file /opt/app/tmdsdb/ora01/Q0TEST/logs/bdump/q0test_psp0_24055.trc:
ORA-00704: bootstrap process failure
Instance terminated by USER, pid = 26454
ORA-1092 signalled during: alter database open resetlogs...
Anyone has any idea what to do? or is it possible?
Thanks in advance.
Daljinder

This is my question .....how can I do that. I did
1. restored database - using RMAN 10g
2. recovered using backup controlfile until cancel;
3. Tried to open "alter database open resetlogs;";
4. Got error.
5. tried to oprn "startup upgrade;"
SQL> startup upgrade;
ORACLE instance started.
Total System Global Area 520093696 bytes
Fixed Size 2031352 bytes
Variable Size 406847752 bytes
Database Buffers 109051904 bytes
Redo Buffers 2162688 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
So how can I do this.....

Email working, but not with BlackBerry

Hi everyone,
I have come across quite a strange problem, after some extensive research I can not find any solution so I have come here to ask if anyone can provide any answers to this.
I have my own email address [own domain] and it is working fine, receiving emails/sending emails and it is working with my desktop etc. apart from my BlackBerry - I enter the BlackBerry Email Setup and enter all the details of the email, and it says
"Email address domain not found. The email address *** cannot be found. Please veryify this..."
I have checked the domain and the DNS Zone/MX Records - all seem to be fine (apparently) as the email works with Outlook and I can access webmail fine...
This all started a week ago, I do not know why!
Solved!
Go to Solution.

Qutie honestly, it may work later. I've seen this odd behavior before.
Just try the setup again later. If after 48 hours it doesn't let's look again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sending email with Entourage worked, but Apple Mail fails

I want to migrate from Entourage to Apple Mail. However sending emails using the smtp of my hosted website, fails every time.
I use the same SMTP settings as configured in Entourage, but the connection manager cannot connect to these smtp servers.
When I setup a gmail account, these smtp settings do work, so this is a strange problem.
In the SMTP configuration I have indicated that no SSL must be used and authentication is by Username/Password. Also the default port must be used, so this should be easy.
Does anyone recognise this problem and help me out?
Thanks in advance.

23circles:
I would like to find a way to only have the gmail inbox but still send from any three of her accounts.
You can do it this way:
Set up only one account. The one from which you want to receive mail.
In Mail > Preferences > Accounts > +gmail acct+ > Email Address insert the other email addresses, separating each with a comma and single space.
Only the GMail account will receive incoming Mail. However, when you want to send from another address, in the From dropdown menu toggle the address from which you wish to send mail.
You will, of course, delete the other accounts you have created to avoid getting incoming messages.
cornelius

Iron Browser: login works but resets and fails...

I wonder if anyone else is having this issue in Iron browser. I log into the wiki/forum/etc and the redirect takes me back to the page I was at without logging me in... the redirect page says login successful, but when the page finishes loading, the login option is still at the top and options like replying to posts or adding an AUR package are not there because the page basically didn't register that you logged in.
Looking back over this, my words do seem slightly confusing, but basically put, Iron won't let me log in... and I'm not sure what's up. If at least one other person could recreate the issue, I wouldn't feel so bad. So far it does this on my laptop and Desktop... both of which are running Arch64.

Also, the spin up/spin down frequency seems to have increased dramatically recently. This concerns me, as high spin up cycles can cause them to have a shortened life span. It used to only spin up when Time Machine was going to do a backup. But now it is spinning up on the order of once every five to ten minutes, then spinning down after about two minutes on.

IPad email working but not iPhone

I have an email account that has no problem sending or recieving emails on my iPad but I started to have problems with the same account sending emails on my iPhone5c. I could still recieve emails on my iPhone but just couldn't send. I decided to delete the account on my iPhone and reset and now I can't get or send on my iPhone. Still no problems on my iPad with the same email account. I've copied everything on my iPhone (down to the server port #) that's on my iPad and it still isn't able to receive or send.
Any ideas? Thanks in advance!

The error message was "The mail server smtp.fuse.net is not responding. Verify that you have entered the correct account info in Mail settings."
Email account provider is Cincinnati Bell Fuse. Yes, the iPhone and iPad are connected to the same WiFi at work and at home and can send and recieve on iPad and but nothing on the iPhone.
It counldn't verify with the port number that I had on my iPad so I chose another and it did verify but still no email.
Thanks Allan

Email works but won't push

I've set up my email with Exchange ActiveSync, and when I tap on Mail, it connects and downloads emails; but I can't get it to push them through automatically, like with SMS, in a 'you've got mail' way. i.e. I never have a little red circle with new emails on Mail; but when I check I DO have mail.
I've checked my settings in Fetch New Data, and am set for PUSH, and have back up of Fetch at 15 minute intervals, but it just won't work!
Any bright ideas anyone?
My IT Dept say it's all fine their end, and o2 say it's IT's responsibility...
Thanks for any help you can give!

Thank you but I have and use a MobileMe account and I am aware of the differences between IMAP, POP, and push services that use Exchange, etc.
In my 6+ months experience with my iPhone 3G, I have found Apple's own push service with MobileMe to be extremely flakey/inconsistent in visually displaying new email alerts in the Springboard or audibly notifying based on sound preferences. The same for fetch.
In fact, I sent myself a test message to my .me account as I wrote this message. Two minutes later, I still haven't heard an alert and the count of my new email messages is wrong in the Springboard.
But when I check my email on iPhone it is there.
Sometimes iPhone will have the proper count and give you the audible alert, but I find, especially if you haven't been using the phone, it often doesn't keep up and Apple's push services is not better than the fetch service for POP and IMAP.
What I am suggesting is that BECAUSE the MAIL PUSH service is still a work in progress they haven't rolled out access to push notification for 3rd party developers.
The best way to know if you have new mail on an iPhone is to open the Mail app and manually check each of your accounts.
Email account aggregation would be nice too but that's another discussion

Eclipse applet viewer works but not browser

With the code below, my problem is that I am able to get the applet to work in eclipse but unable to get it to work in a regular IE browser. I tried various different ways of getting the path name. The code goes through printing **File name :edu/vt/vbi/pathport/client/plugin/pathinfo/pathinfo.xsl with the classloader being not null. However, it seems that the problem occurs when trying to get the url and then getting the input stream. myClassLoader.getResource(xslFileName); seems to be returning null according to the browser console but is retrieved okay by eclipse. any help would be much appreciated. thanks in advance.
String clsName = this.getClass().getName();
int lastDot = clsName.lastIndexOf('.');
String pkgName = clsName.substring(0, lastDot);
String xslFileName = pkgName.replace('.', '/');
xslFileName = xslFileName + "/pathinfo.xsl";
System.out.println("**File name :" + xslFileName);
ClassLoader myClassLoader = Thread.currentThread()
                         .getContextClassLoader();
URL url = null;
if (myClassLoader == null) {
          System.out.println("classloader is null");
} else {
     url = myClassLoader.getResource(xslFileName);
//InputStream is = myClassLoader.getResourceAsStream(xslFileName);
InputStream is = null;
try {
     if (url != null){
     System.out.println("url is " + url);
     is = url.openStream();
} catch (IOException e) {
     System.out.println("url null");
     e.printStackTrace();
if (is == null) {
     System.out.println("resource not found");
Transformer transformer = tFactory
                         .newTransformer(new javax.xml.transform.stream.StreamSource(
                                   is));

problem solved... jar path required extra / in order to be recognized. thanks

Iphone email works but generates wrong return address

I'm using iphone 5 ios7
I can receive and generate email from my iphone to my pop server account. However, any email I send out has the wrong return addess -- it's missing a digit.
In settings, when I go to that account, it has the wrong address with a check mark. But all efforts to add another email, the right one, and put a check next to that to make it the default, have failed. Correct address simply does not remain on that line once I leave that screen.

What part of settings are you going to where you see the email address with a checkmark? The return address for your email is set at the beginning and when you create the account. Your best bet is to delete the account and recreate it making sure all settings are correct.
I think I found where you were. When you first go into Settings and then select the account, then look under POP account information and select the email. You need to fix the default, which is the one when you create the account. That is where the error is at. You cannot change the default by adding a new address in that area.
Message was edited by: ChrisJ4203

CQ5.4 publish to Scene7 works but shows as failed

Using Adobe CQ 5.4
I am trying to upload an asset to Scene7 from the DAM. The workflow model has been configured. When I click on "Publish to Scene7", I get the message "Publishing failed". The upload actually did work, though, because the asset is in Scene7.
The Scene7 workflow ECMA script does not log anything of relevance. The problem seems to come from cq-dam-scene7-5.4.0.jar. The log shows three consecutive *INFO* entries (coming from the JAR file), then the entry:
10.01.2013 16:06:37.620 *ERROR* [JobHandler: /etc/workflow/instances/2013-01-10/model_1357851996443285000:/content/dam/saq/matthieu/mo untain.png] etc.workflow.scripts.uploadScene7Asset$ecma failed
So while the upload worked, on the CQ side the DAM asset never gets updated to reflect this. This also causes the Scene7 Sidekick components to not work at all.
Has anyone encountered something similar? There's the exact same problem here http://forums.adobe.com/message/4656056#4656056 but it's for CQ 5.5. I am using 5.4.

I think the easiest way would be to change your detection method to the presence of a file.
I use "communicator.exe" for Lync. That would solve your problem.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

1 Gen Shuffle front orange light not working but all else does - ideas??

The front L.E.D. (light) will not glow orange when charging and will not flash (blink) when downloading songs. The rear light (below the on/off switch) does work correctly. The green L.E.D. works properly and the iPod functions correctly in all other respects.
I have used the iPod on both a Mac iBook G4 and a Windows laptop quite successfully since I purchased it 195 days (6 1/2) months ago.
Am using iTunes 7.0.2 and iPod software version 1.1.4
This is a 512mb iPod Shuffle.
Any ideas and help much appreciated!
Richard Garrett

You could probably get it replaced under warranty, and that would be a good solution. It will work fine without it (and no sort of a software fix is going to make it work, in all likelihood), but the amber light does provide some fairly important indications and warnings that you'd do better to have available.

Remote connection works but local connection fails.

Hi
I know this might not be the correct forum, but many DBAs might have encountered this problem.
I have a machine installed on it Oracle 9.2.0.1.0 Win 2000
and i have forms 6i installed on it with patchset 16.
In my tnsnames i have 2 different connections 'DEV' and 'PROD'. DEV is the local db and PROD is the remote db.
Whenever i connect to the remote db everything's working perfectly, but whenever i try to connect to the local db fors or sqlplus or any other tool is generating an error and being closed. I uninstalled and re-installed 4 times maybe, i even formatted my machine and re-installed everything fresh but the problem persists.
Anyone encountered anything like this??
Any suggestion is apreciated, help needed urgent!
Thanks in advance.
Tony S. Garabedian

Hi again
i tried everything but no changes, so i re-installed forms6 i noticed during installation the followin error message.
C:docum. & settings\all users\start menu\programs\Oracle Developer 60 - <ORACLE_HOME> is not accessible.
The folder was moved or removed.
after that when i tried to run anything, form builder sqlplus80 etc... all i got was this.
<program_name> The ordinal 8030 could not be located in the dynamic link library UIW60.dll.
Please i need urgent help
Regards
Tony
PS: THANKS GOD FOR 9iDS :)

TS1347 All my contacts were lost after my husband uploaded the newest version to my iphone 3Gs. I never had done an update before. My email stopped working so I gave it a try. My email works, but my contacts & pictures are missing.

How do I get my contacts back after upgrade?

The "system" performed as designed. All devices syncing to one iCloud account are kept in common sync. The idea is that all such devices belong to one user. Different users should have different iCloud accounts. Once your contacts were edited, all devices were updated as well and subsequent backups (from yours and her device) reflected the changed contacts (and any other data that may have been edited like calendars). Your first task is to change your daughter over to a new account before she makes other changes.
The only way I see for getting back contacts is to restore them from a time machine backup, assuming you also have a Mac included in the account which syncs the contacts. However, I'm not sure whether time machine includes contacts from iCloud along with those that are local, "on my Mac".
Otherwise the deleted contacts are gone.

Email works but my browser fails - ideas?

Similar Messages

Maybe you are looking for