Emails are Blocked from domains which are added to "BypassedSenderDomains" in Exchange 2007 Edge server

Hi,
We have an Exchange server 2007 and an Edge server 2007 is configured in the perimeter network. Most of our clients use Public email domains such as Yahoo and Gmail. Last few weeks it has been a  major issue for us that most of the emails from Yahoo/Gmail
get blocked by our Edge server calming the sender IP address is in Block Lists.
As a solution I've added yahoo.com/gmail.com/aol.com/hotmail.com to "BypassedSenderDomains" hoping if emails receive from one of these domains it will bypass the connection filtering. But still some of our customers complain that their emails are
still not passing to us and blocked by our edge server. They have provided me the error message they receive.
Our clients get following error message
edgexch gave this error: Recipient not authorized, your IP has been found on a block list
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction
may be preventing delivery.
550 5.7.1 Recipient not authorized, your IP has been found on a block list 
When I check the Agent logs in Edge server  I found specific email had been blocked. Please check one of the log entry.
Timestamp       : 1/30/2014 1:45:15 PM
SessionId       : 08D0E865200E7CBF
IPAddress       : 98.139.213.140
MessageId       :
P1FromAddress   : Sender Email Address (@yahoo.com)
P2FromAddresses : {}
Recipients      : {Recipient  Email address}
Agent           : Connection Filtering Agent
Event           : OnRcptCommand
Action          : RejectCommand
SmtpResponse    : 550 5.7.1 Recipient not authorized, your IP has been found on a block list
Reason          : BlockListProvider
ReasonData      : bl.spamcop.net
This troubles me because I've added Yahoo.com to "BypassedSenderDomains" on 1/28/2014 and this email was blocked on 1/30/2014. I've checked whole Agent logs from 28th to-date and found most of the messages from white-listed domains  bypassed
the content filtering but some were  still getting blocked. Most of the messages from white-listed domains were blocked from "bl.spamcop.net " IP block list provider.
As a solution for the current situation I've disabled "bl.spamcop.net" from the "IP block List Providers". But the issue is, why the mails are getting blocked even the domains were white-listed. I though after white-listing emails domains,
messages will bypass the content filters if the email generates from one of the white-listed email domain.
I've also added the "Content Filter Config" for your reference.
[PS] C:\Windows\system32>Get-ContentFilterConfig
Name                                                              
: ContentFilterConfig
RejectionResponse                                         
: Message rejected as spam by Content Filtering.
OutlookEmailPostmarkValidationEnabled   
: True
BypassedRecipients                                       
QuarantineMailbox                                        
: [email protected]
SCLRejectThreshold                                     
: 7
SCLRejectEnabled                                        
: False
SCLDeleteThreshold                                     
: 9
SCLDeleteEnabled                                        
: False
SCLQuarantineThreshold                              
: 5
SCLQuarantineEnabled                     
: True
BypassedSenders                                           
BypassedSenderDomains                              
: {yahoo.com, gmail.com, hotmail.com, aol.com}
Enabled                                                          
: True
ExternalMailEnabled                  
: True
InternalMailEnabled                  
: False
AdminDisplayName                     
ExchangeVersion                      
: 0.1 (8.0.535.0)
DistinguishedName                    
: CN=ContentFilterConfig,CN=Message Hygiene,CN=Transport Settings,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,CN={4546F49-6BC5-4F7A-848F-03E4652528A6}
Identity                             
: ContentFilterConfig
Guid                                 
: c501959c-b062-4f59-8f0c-404c53f54a34
ObjectCategory                      
: CN=ms-Exch-Message-Hygiene-Content-Filter-Config,CN=Schema,CN=Configuration,CN={4546F4196BC5-4F7A-848F-03E4652528A6}
ObjectClass                          
: {top, msExchAgent, msExchMessageHygieneContentFilterConfig}
WhenChanged                                                           
: 1/28/2014 8:48:49 PM
WhenCreated                                                 
: 1/8/2012 8:42:18 PM
OriginatingServer                                           
: localhost
IsValid                                                           
: True
It would be great if someone could help me to resolve this issue because this is a major problem since we lost mails from our valuable customers.
Thanks in advance.
Tharaka

Here is a similar issue someone with Exchange 2010 -
http://social.technet.microsoft.com/Forums/exchange/en-US/36aec4f6-6d73-4d71-ab64-e7f3d817b39b/exchange-2010-still-blocks-mail-from-domain-on-dnsbl-even-though-its-on-bypassedsenderdomain?forum=exchange2010.  So in essence, use the exceptions tab for
the IP Block List Providers.  See if that will work as a solution for you.
JAUCG - Please remeber to mark replies as helpful if they were or as answered if I provided a solution.

Similar Messages

  • Why have my emails been blocked from downloading?

    The email below was sent to me saying I have been automatically removed from the CCLIST1 list (Calorie Count Monday) as  a result of repeated delivery error reports from my mail system and indicating my email account does not exist and that I may be permanently unable to receive emails on my OS and iOS devices.
    This is the second time in three months it has happened. At that time I couldn't find any help on the web or from computer-savy friends regarding how and why it happened or how to rectify the situation. After a week or two my email was permanently blocked and I had to change my email address and contact a couple hundred people and businesses with the new address -- many hours were spent doing this. I could still read my emails and send them on my service provider's website, CenturyLink. This was very helpful as many of the web accounts I had required email address verifications before they would accept account information changes.
    My internet/email service provider tried to help by having me redo setting up the Mac Mail account on my iMac. That didn't work. I also went online to Apple to again use the method for resetting the Mail account as well as look for answers.
    I received the email below yesterday, so hopefully I have some time to solve the problem before my email is blocked from downloading to my devices.
    Any advice and step-by-step directions on rectifying this problem would be very much appreciated.
    Sincerely,
    Bonnie
    "Tues, 21 Jan 2014 00:02:39
    You have been automatically removed  from the CCLIST1 list (Calorie Count
    Monday) as  a result of  repeated delivery  error reports from  your mail
    system. This decision was based  on the list's automatic error monitoring
    policy and has  not been reviewed or otherwise confirmed  by a person. If
    you receive  this message, then it  means that something is  wrong. While
    you  are obviously  able  to  receive mail,  your  mail  system has  been
    regularly reporting  that your account  did not  exist, or that  you were
    otherwise permanently  unable to receive  mail. Here is  some information
    that may assist you  or your local help desk in  determining the cause of
    the problem:
    - The failing address is [email protected].
    - The first error was reported on 2014-01-06.
    - Since then, a total of 2 delivery errors have been received.
    - The last reported error was: 5.1.0 Probe failed
    PLEASE DO  NOT IGNORE  THIS MESSAGE.  While you  can re-subscribe  to the
    list,  it is  important  for you  to  report this  problem  to your  mail
    administrator so that  it can be solved. This problem  is not specific to
    the CCLIST1 list  and may also affect your private  mail. This means that
    you may have  lost some private mail  as well. Anyone trying  to write to
    you during  the same time frame  might have received the  same errors for
    the same reason."

    I read a few more discussions on this problem elsewhere on-line with the suggestion that I had a bug on my computer that hijacked my email account to send emails elsewhere (not that I had any clue on how to discover that on my computer).
    I followed the suggestion to access my email account on-line and change my password and make it stronger. I did that and was able to get my emails downloaded to my computer and other devices.
    I'm pretty sure that my original problem started when I unsubscribed from the Calorie Counter on-line newsletter by pressing a link at the bottom of the email I received from them. A screen came up that said I was unsubscribed and then disappeared in a flash.The experience seemed odd and weird compared to other times when I've unsubscribed from something.
    As a test I resubscribed to the newsletter and then unsubscribed. I was directed to one of CCounter's internal web pages and went through a couple of steps in order to finish the process... all very professional and obviously on the newsletter's website.
    So the lesson I learned was have a strong password for my email and change it occasionally. And do the same for other accounts that are password protected.

  • Decommission Exchange 2007 Mailbox Server from Cluster

    Hi! I realize this is an Exchange 2013 forum, however as I do not see any forums for older flavors of Exchange I'm going to post this here. If a better forum exists please let me know and I'll happily move to that forum for my answers.
    I am just finishing a migration from Exchange 2007 to Exchange 2013.  In the Exchange 2007 environment I have 2 CCR Mailbox Clusters.  While working to decommission the first of the two clusters I successfully evicted the passive node, however
    I mistakenly evicted the active node rather than removing it by running the Exchange Setup Wizard as outlined in the TechNet article "How to Remove the Active Mailbox Role from a CCR Environment".
    Now, when attempting to uninstall Exchange 2007 using the Setup Wizard in Add/Remove Program I get the following error during the prerequisite check for the 'Mailbox Role':
    Error:
    Exchange server FQDN was not found. Please make sure you have typed it correctly."
    Setup then completes.
    Is there a way to cleanly uninstall Exchange 2007 and clean-up Active Directory?
    Thanks!

    Hi Jesse,
    Thank you for your question.
    We could run “ADsiedit.msc” in run, then navigate
    Configuration [<domainController>.contoso.com]> CN=Configuration,DC=contoso,DC=com> CN=Services> CN=Microsoft Exchange> CN=<OrganizationName> CN=Administrative Group> CN=Exchange Administrative Group>CN=Server
    We could check if mailbox server is existed in this container, we could remove it.
    Notice: Before we remove it, we could make a backup for AD database. We suggest you call MS engineer for help.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Q. I have other apple account but that email is blocked from long time ago and im still used in my apple id. My Q can i get my bells from that account by other way

    Cant i get my bells in other ways ?

    Go to http://appleid.apple.com and log in with the ID you are asking about. You will see the address which forms the login on the page: click 'Edit' next to it and change it to a working email address (not an Apple on) - though if it is in fact an Apple address itself (i.e. @mac.com, @me.com or @icloud.com) you can't change it.

  • Gmail emails are getting stuck in my exchange outbox

    I am using Outlook 2010 with my Gmail IMAP account and am having an issue where sometimes emails that I send from my Gmail IMAP account, get stuck in my exchange outbox. My exchange server hasn't been connected for at least 6 months now, and the only reason
    I haven't deleted my exchange account from Outlook is because I often need to refer back to my old emails.
    Why does this happen and what can I do to fix it? I've read some other threads with similar issues but an important thing to note is that my exchange account is always offline as it is not connected to a mail server. Any assistance with rectifying this issue
    would be great as there is no warning at all that the messages have failed to send and it's not a constant issue, only happens sporadically but enough to make me consider not using Outlook anymore.

    Sounds like you have two email accounts in one profile, Exchange and Gmail IMAP. Try to set the IMAP account as the default to test it. For logic, if you send a message through IMAP, the send message would stay at IMAP sent folder but not Exchange folder.
    Thanks.
    Tony Chen
    TechNet Community Support

  • Edge Transport Server Fails DNS Query When Emailing to one Specific Domain

    This issue occurs for the same domain across three different edge transport servers.
    All servers are Windows 2008 STD SP2, Exchange 2007 SP1 U9.  Emails are delivered using DNS connector from edge.  Emails to this one specific domain would sit in the retry queue with DNS query error until NDR was generated.  Connectivity Logging generated the following:
    2009-09-01T19:52:23.539Z,08CBEDE9198E2DC3,SMTP,subdomain.domain.com,>,DNS server returned ErrorRetry reported by 208.241.124.200
    2009-09-01T19:52:23.539Z,08CBEDE9198E2DC3,SMTP,subdomain.domain.com,-,The DNS query for 'DnsConnectorDelivery':'subdomain.domain.com':'cd771f71-77a3-4aca-b002-86f477816910' failed with error: ErrorRetry
    I changed the servers DNS settings to different servers with the same response.  Validated that manual MX lookups worked, and that I could telnet to any of the three MX records and deliver mail via telnet.
    I did a packet capture and received the following:
    12    32.280037    172.28.16.55    208.241.124.200    DNS    Standard query AAAA SMTPSERVER.subdomain.domain.com
    So what is happening is the Edge servers are only performing IP6 lookups, and throughout the log, only for subdomain.domain.com do they NOT perform a regular IP4 A record lookup.  I then went about disabling TCP/IP6 as per this article:
    http://technet.microsoft.com/en-us/network/cc987595.aspx
    this stated to do the following:
    Alternately, from the Windows XP or Windows Server 2003 desktop, click Start , point to Programs , point to Accessories , and then click Command Prompt . At the command prompt, type netsh interface ipv6 uninstall .
    To remove the IPv6 protocol for Windows XP with no service packs installed, do the following:
    Log on to the computer with a user account that has local administrator privileges.
    From the Windows XP desktop, click Start , point to Programs , point to Accessories , and then click Command Prompt .
    At the command prompt, type ipv6 uninstall .
    Unlike Windows XP and Windows Server 2003, IPv6 in Windows Vista and Windows Server 2008 cannot be uninstalled. However, you can disable IPv6 in Windows Vista and Windows Server 2008 by doing one of the following:
    In the Network Connections folder, obtain properties on all of your connections and adapters and clear the check box next to the Internet Protocol version 6 (TCP/IPv6) component in the list under This connection uses the following items .
    This method disables IPv6 on your LAN interfaces and connections, but does not disable IPv6 on tunnel interfaces or the IPv6 loopback interface.
    Add the following registry value (DWORD type) set to 0xFF:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledComponents
    This method disables IPv6 on all your LAN interfaces, connections, and tunnel interfaces but does not disable the IPv6 loopback interface. You must restart the computer for this registry value to take effect.
    I did the above, and still, the Edge Transport servers would only perform AAAA lookups, and messages would sit in the queue.
    As temporary workaround, created new send connector with the three available MX hosts as possible smarthosts for subdomain.domain.com, and this allowed email flow.
    I've tried disabling the TCPIP6, and still doesnt work.  Any suggestions?

    Hi Allen and Paul,
    we experience problems in receiving mails from senders with this Exchage server problem. When we are aware of the problem, we send them the above mentioned link and ask them to make adjustments. Then afterwards usually mail arrives without any problems.
    The problem for us is that it seems as if the problem grows. More and more mail does not arrive on our mailadresses (mine for example is [email protected]) And not all of the senders recieve notifications that mail cannot be delivered. As you can imagine
    this situation is unacceptable and damaging our customer relations.
    Is there anything WE can do? (apart from sending them the information to make adjustements in their Exchange servers...)
    I hope you can help us...
    Thanks in advance
    Leonard
    Hi Leonard,
    as stated below we where experiencing the same problem with one of our customers. Seeing that it's a DNS related problem we suggested to the customer to change or add an additional DNS service through i.e. dyndns.com. After adding the current DNS records
    to the new DNS service mail started coming in from every customer that had problems.
    So for your clients i would suggest a similar solution, it helped over here at least.
    Kind regards,
    Philipp

  • SBS2008: Move email from Exchange 2007 to new server with Exchange 2013

    We have an old server (SBS2008) and plan to buy a new server with (Server 2012). I need to move all the exchange emails, contacts & calendars to the new server. We will no longer use the old server. 
    Is there a document or migration tool that will help me understand how to move this data form the old exchange server to the new one? 
    Old Server:
    SBS2008 running Exchange 2007
    New Server:
    Server 2012
    Exchange 2013
    Any help is appreciated!

    Hi Dave,
    It can be done, and as Larry suggested you will consider two Server 2012 installs in order to achieve an environment that looks like your current SBS roles; Exchange 2013 on an Active Directory controller isn't a good long-term solution (SBS did this for
    you in the past).
    For your size operation, a virtual server host, with a Windows Server 2012 license, and two virtual machines would probably be a suitable design model.  In this manner, you have Server 2012 license that permits 1 +2 licenses (one host for virtualization,
    up to 2 Virtual Machines on same host).
    There's no migration tool. That comes with experience and usually trial and error. You earn the skills in this migration path, and for the average SBS support person you should plan on spending 3x (or more) your efforts estimate in hours planning your migration. 
    You can find a recommended migration path at this link to give you an idea of the steps, but its not exactly point by point going to cover you off for an sbs2008 to server 2012 w/exchange 2013 migration.  But the high points are in here. If it looks
    like something you would be comfortable with then you should research more.
    http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
    Specific around integrating Exchange 2013 into an Exchange 2007 environment, guidance for that can be found here:
    http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
    If that looks like something beyond your comfort level, then you might consider building a new 2012 server with Exchange 2013 environment out as new, manually export your exchange 2007 mailbox contents (to PST) and then import them into the new mail server,
    and migrate your workstations out of old domain into new domain.  Whether this is more or less work at your workstation count is dependent upon a lot of variables.
    If you have more questions about the process, update the thread and we'll try to assist.
    Hopefully this info answered your original question.
    Cheers,
    -Jason
    Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

  • Send email for a given domain over VPN

    Hi all,
    I have an IPSec site-to-site VPN working between 2 end-points.
    Is it possible to send emails destined to the domain @mycompany.com over the VPN?
    Normally, the mail server will try to resolve the domain name and end up with a public IP for the destination SMTP server.
    Any idea how this can be implemented on the server and on the router?
    Thanks for any help.

    Let's say the local mail server finds that the remote mail server addresses for domain @mycompany.com are mail1.mycompany.com and mail2.mycompany.com.
    Should I modify the hosts file on the local mail server so that mail1.mycompany.com points to, for e.g., 192.168.200.1 and mail2.mycompany.com points to 192.168.200.2?
    Interesting traffic is "permit ip 10.0.0.0 0.0.255.255 192.168.200.0 0.0.0.255". The private ip of the local mail server is 10.0.0.13/16.
    Below is an excerpt of the current config on my local Cisco 2801 router:
    crypto map mapVPN 10 ipsec-isakmp
    set peer
    set security-association lifetime seconds 43200
    set transform-set TS_esp-3des-sha
    set pfs group2
    match address aclInterestingTraffic
    interface Serial0/1/0
    ip address 255.255.255.252
    ip access-group aclIncoming in
    ip nat outside
    crypto map mapVPN
    ip nat inside source route-map nonat interface Serial0/1/0 overload
    ip nat inside source static tcp 10.0.0.13 25 25 extendable
    ip access-list extended aclInterestingTraffic
    permit ip 10.0.0.0 0.0.255.255 192.168.200.0 0.0.0.255
    permit ip 10.6.0.0 0.0.255.255 192.168.200.0 0.0.0.255
    ip access-list extended aclIncoming
    permit tcp any host eq smtp
    ip access-list extended aclNAT
    deny ip 10.0.0.0 0.0.255.255 192.168.200.0 0.0.0.255
    deny ip 10.6.0.0 0.0.255.255 192.168.200.0 0.0.0.255
    permit ip 10.0.0.0 0.0.255.255 any
    permit ip 10.6.0.0 0.0.255.255 any
    route-map nonat permit 10
    match ip address aclNAT

  • Using multiple email accounts, smtp from provider, sender's address is the same for all email accounts

    Ok
    I'm sure this is an issue for many of us, but I cant find a solution for this on the net.
    So I had set up multiple email accounts. My main account is gmail, but I'm using several others. The smtp server had to be the same which was from my ISP for all email accounts (apart from gmail which has it's own).
    Now, when I send email from these accounts, the sender's address will always be ***@virginmedia.co.uk. Obviously, since thats what the smtp is for.
    But what if I want to send emails from these accounts and want to be the sender accordingly? like ***@yahoo.com or ***@freemail.com etc...
    Is there a way to get around these? If they dont have their own smtp servers? Or they can only be used to send emails through their web-based email page?
    Hope it makes sense, sorry for my crap english.
    Thanks
    Daniel

    Can you tell us which is the mail account ( hotmail, gmail or any personal)
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • Can't send emails on iPhone from .me account

    I cannot send emails from my iCloud account on my iphone.  Recieving is works fine. Only sending is the problem.  I keep getting "The connection to the outgoing server pO3-mail.me.com failed". 
    Is anyone else having this problem???

    I am having the same problem on my iPod Touch 4G iOS5. 
    I can receive email sent to the @me account on my iPod,
    I can send mail from my Cloud @me account on my computer, and
    I can send mail from my other email accounts on the iPod
    BUT
    I cannot send mail from my @me email account directly from the iPod Touch.
    Error message: "The conection to outgoing server "p01-smtp.mail.me.com" failed.

  • Contacts created with Lotus notes are not seen in Exchange 2007 SP3 Rollup 7.

    Contacts created with Lotus notes are not seen in Microsoft  Exchange 2007 SP3 Rollup 7. the same is seen in Microsoft Exchange 2010 without issues.
    when we create a new contact on Microsoft Exchange 2007, the contacts gets created but it is not seen unless we filter the EMC to list the contacts. Microsoft Exchange 2010 does not have any issues. 
    any help or inputs will be appreciated.
    Thanks,
    Sid

    You shouldn't be using the 2007 EMC or cmdlets to create new objects if you have a more recent release installed in your organization. Use the 2010 software.
    If you create the mail-enabled contact with the 2010 EMC or cmdlets do you see it in the 2007 EMC?
    When you say the contact "is not seen unless we filter the EMC to list the contacts", does that mean you don't see the contact when you're looking at the "Recipient configuration" container? Is there a default filter on that container? Do you have a limit
    on the number of objects shown?
    As for the objects created by 3rd-party software (Lotus), are they creating the contacts correctly?
    --- Rich Matheisen MCSE&I, Exchange MVP

  • Migrating from Exchange 2007 to exchange 2013 ( special case )

    Hello , 
    what is the BEST scenario ( fastest , most efficient , most secure in terms of data loss )  , to migrate from exchange 2007 ( one server , all exchange roles installed on this server , 1200 mailbox ) , to exchange 2013 ? 
    knowing my environment needs to be connected to their mailboxes , 24/7 ! 
    it's very frustrating . 
    and i have no clue even if this is the right place to post about this , if not please refer me as to where to post . 
    Also , All my domain controllers are 2008 .

    It's fine to post your question here, and you are fine with Server 2008 Domain Controllers - that is a supported scenario.
    If you haven't performed such an upgrade and you need to have 24/7 mailbox availability, I would seriously recommend you to duplicate the production environment on a test network and run through the upgrade at least once.
    Most people neglect the Outlook clients requirements - they need to be updated and include several specific updates, which allow the automatic reconfiguration of internal clients. If you are preparing for this upgrade, you should be aware that all internal
    Outlook clients switch to Outlook Anywhere. Clients that miss these updates will get connectivity problems.
    Another common problem is the configuration of the Exchange URL - I mean the Exchange 2013 URL and the modified Exchange 2007 URL that will allow the co-existence. In your case, you definitely need to plan for co-existence - that includes requesting and
    installing a new Exchange UCC (Multiple Domain Certificate) on both Exchange servers, configuring Split DNS (or preferably PinPoint DNS zones), and correct timing when replacing the existing Certificate on the Exchange 2007 server. Failure to configure the
    correct URL (and it's quite easy to miss one, so triple check them) will get you in trouble.
    Once you get through the switchover (switching the mail flow and Client Access through the Exchange 2013 server), move just a couple of test mailboxes and check the result.
    Finally, if you are moving the Public Folders, make sure that the lock is really applied before you complete the process. Most people proceed right away and that get's the process stuck. If you can afford it (the mailboxes are already on the Exchange 2013
    server at that point), just restart the Exchange 2007 server (after locking the Public Folders) and then complete the Public Folder migration.
    Good Luck with the project!
    Step by Step Screencasts and Video Tutorials

  • Adding a new forest to Exchange 2007

    Hello,
    I currently have an exchange 2007 cluster server (EX01.love.corp) where I can make email addresses for accounts in my Love.corp domain AD. We are going to migrate all the users to the Hate.local domain, as such a domain that is not yet defined in the Exchange
    server EX01. 
    When I try to define a different resource AD i can only see the DC in the love.corp domain. I want to add the Hate.local domain so I can use that AD as a second resource, eventually removing the AD resource from the love.corp domain.
    Question: How do I add the DC01.hate.local in the server configuration of the EX01.love.corp (hub transport) Domain controllers and Global catalog servers used by exchange?
    thanks,
    Robert

    Hello,
    According to your description, I understand you want to migrate AD users to a new forest(Hate.local).If so, I consider you can do it. But I'm afraid that you can't specify Ex01 will use DC01.hate.local in the server configuration.
    Cara Chen
    TechNet Community Support

  • Moving from Exchange 2007 to 2013 (leaving the DNS Server for it's own dedicated server)

    Hello! I am quite new to Exchange and Server management in general. I will do my best to explain my situation.
    I am looking to move my Exchange server off of our DNS server. When we installed them on the same server, we did not have the funds to buy 2 separate servers. I am told that it is best to separate the two. I have followed the Microsoft instructions for installing
    the prerequisites for Exchange 2013 on a 2012 R2 server, and i am at the point where it wants me to configure AD LDS. As I have active directory running on the current server, I was a little hesitant to just install it without understanding what i am doing.
    After the AD LDS is configured, I believe i can move forward with installing Exchange 2013 (all 3 roles will be hosted on the new server), export the mailboxes from 2007 server and import them into the new Exchange 2013 server. After 2013 is up and stable,
    I plan on removing 2007 from the old server (DNS server).
    What are my next steps after importing the mailboxes? Am i missing important details that I need to change or migrate?
    My biggest fear is that nothing works after the installation and moving the mailboxes over. For that case, it makes sense to keep 2007 installed as a fallback for when my installation fails and all i have lost is just my time :)
    Current Server:
    Windows Server 2008 Standard (64 bit)
    1. Roles: Active Directory, DNS, IIS
    2. Software: Exchange 2007
    New Server:
    Windows 2012 R2 Server
    1. Roles: ???
    1. Software to install: Exchange 2013
    Thank you for any help you can provide!

    These are good resources, but i am still caught up with the active directory issue.  Am I able to keep the old Domain/DNS/Active directory on it's current server and move Exchange 2007 off onto a new server (with Exchange 2013)?
    In the first example, he is moving everything (domain controller, exchange, users, etc) onto a different server and decommissioning it.I've been told that it would be better practice to keep the domain and exchange on 2 different servers. Is this true?
    I go to run commands like:
    .\setup /PrepareAD /OrganizationName: orgname /IAcceptExchangeServerLicenseTerms
    on the new exchange server, as a prerequisite and it doesnt recognize the command - even after following the steps before. Is this because the new server is not a domain controller? does it have to be? What are the best practices for setting up a server(s)
    with exchange + domain controller?
    Thanks for responding.

  • Restore Exchange 2007 SP3 to Windows 2008 R2 from Windows 2003

    Perhaps I'm being dense, but I had Exchange 2007 SP3 installed on a Windows 2003 Server, and I've used "setup /mode:recoverserver" to restore it to a Windows 2008 R2 server... how do I restore the databases which I backed up with the Windows backup tool
    on 2003?
    I installed KB974674, the restore tool onto the 2008 R2 server but when I try and restore the backup it comes up with "this feature is no longer supported".  Something I'm missing here?

    These things marked as answers are not answers.
    I have now thoroughly tested using setup /mode:recoverserver and it works fine going from Windows 2003 to Windows 2008 R2 with Exchange 2007 SP3, done several installations now without a problem.
    "Setup /m:RecoverServer cannot be used across operating systems. A server that was originally running Windows Server 2003 can be recovered only on Windows Server 2003, and a server that was originally running Windows Server 2008 can
    be recovered only on Windows Server 2008."
    This appears to be wrong, unless someone can tell me why it's right (I haven't tried moving Unified Messaging yet).  I've done it to 2008 R2 several times now and also in the other direction, from 2008 R2 to 2003, I can't find anything that didn't work
    afterward, although I haven't really thoroughly tested OWA yet, I admit (but it does appear to be working).
    I think that documentation is out-of-date as it doesn't mention R2 plus I think it was written before SP3 came out and that paragraph is just wrong.
    Basically how I do it is like this:
    Dismount databases from the 2003 server and copy the storage group folders to a network location or removable media.
    Install the Windows 2008 R2 server using the same machine account that was being used by the 2003 server.  Install the prerequisites needed for Exchange 2007 SP3 installation on 2008 R2 (note in addition to the IIS components and RPC over HTTP this
    also requires the AD tools in RSAT, which I haven't found mentioned in technical documentation).  Install the relevant windows updates.
    Install Exchange 2007 SP3 using setup /mode:recoverserver  Install the update rollup.
    Copy the storage groups into the relevant folders on the new server and mount them.  Migrate any relevant certificates (e.g. for ActiveSync).
    Obviously then check it all over with the diagnostic tools and check it with EXBPA.  The backups are obviously totally different, but really I think you should be using DPM anyway.
    To me that was pretty easy to do, to be honest.  About 1.5 on a scale of one to ten.  Basically install it, recover it, copy over some files and mount them.
    Seriously on a halfway decent server I've done it in under an hour.

Maybe you are looking for

  • Exchange 2013 w/Outlook 2013 "The name of the security certificate is invalid or does not match the name of the site"

    I've completed an upgrade from Exchange 2003 to Exchange 2013 and I have one last SSL message that I can't get rid of.  I've installed a 3rd party cert that is working great for webmail and cell phone access but for some reason the Outlook 2010/2013

  • Linux error :13 permission denied.

    Hi , When I am trying to create a database I am getting the following errors. ORA - 01501 Create database failed. ORA-00200 Control file couldn't be created. ORA -00202 Control file :'/disk1/oradata/DEMO/CONTROL1.ctl' ORA-27040 skgfrcre: create error

  • Firebug in firefox but no error messages

    I am trying to load a game but it doesn't. There is no messgae in firebug so does that mean you only get certain error messages not all? Obviously in the flash ide you get them all. Is there a better debugging tool for online swfs like monster...

  • Help, my mbp crashed disk utility wont stop running

    A couple of days ago, I was using firefox, google earth, and vuze.  I was trying to close some stuff down as my mac was slowing down pretty bad.  She locked up, couldn't force quit... persisted, shut down with the off button.  After that it wouldn't

  • Bex Query - Show rows from another characteristic

    Hi Guys, I have a problem, I need to create a query to be displayed in Excel that shows accounting informacion by number, like this: Account         Balance 12110201       1 USD 12110202       1 USD 12110204       1 USD That works so far, the problem