Emails disappearing on iPhone & iPad after switching from Windows Live to Outlook on PC

I recently changed from Windows Live to Outlook on my PC, now I only see my emails on my iPhone 5 and iPad once, then they disappear. Not all emails are coming through on my ipad or iPhone either.
I have deleted the accounts and re-added. Didn't work.
Really frustrating when I need to view an email which I've already opened on my phone. Please help!

Similar Messages

Sync problems after switch from Windows to Mac; cannot read/write error msg

I'm not sure if this is a hardware or software issue.
I recently switched from a PC to a Mac. To move my iTunes files (50GB) I simply dragged and dropped them from my external HD to my new computer. I know that Apple does not recommend this process, but when I needed to move my library between drivers earlier this year, it was the only way I could do it without getting an error message that killed the process.
Moving the files seemed to be a success. Everything appeared in iTunes, I was able to play the music, etc.
I then tried synching my iPod (Classic 160 GB – I think 5th gen, it’s about 3 years old) on the new computer. I got some message that said you can only have one iPod per account and that I would have to wipe the iPod before syncing. I let it do that.
Here's where problems began:
With a few gigs to go in the sync I got a message that says something to the effect that iTunes cannot read or write to the iPod. Even though must of the library had been transferred to the iPod, before disconnecting the iPod iTunes wiped all but a few hundred megs worth of music from it. I've tried restoring the iPod a few times but that has had no effect. The first time I tried to sync the iPod it was formatted for Windows. I have reformatted it for Mac.
Also noteworthy is that the first 3/4ths of my library copies very quickly -- 1GB a minute -- but then it eventually slows down to where 100 MB takes 10 minutes. It copies the files in a different order every time, so it doesn't look like it's getting hung up on the same files every time.
In case I had a corrupted file, I deleted all the files added to the library since my last successful sync.
Suggestions?
Should I just go to the nearest Apple store and beg for mercy?

Hi!
same problem here.I can use around 30G of my iPod Classic 160G.If i try to upload more than that it will take very long time and finally freezes.
Have no idea what to do..

How to setup photo structure after switch from Windows?

Hi Colleagues,
Have changed all computers at home from Windows into Mac. As a result have new Air and Pro Retina plus NAS system by Qnap.
WIth windows was having a regular photo file structure that was stored on NAS. This "library" has approximately 100GB and is manually structured in folders that represent events. So far was downloading pics to Win computer, making some adjustments, cleaning and only then moving them to NAS.
Now what is the best practice to organize such files with Mac and iPhoto provided that I would like to have access to this database from both MAC's. How to go forward with current taken pics? Where to import them, store, etc?
Look forward for your advices.
Adam

Picasa - you mean the google app and storage?
Was using it for sharing pics, but it had limited space.
There is a Picasa photo manager for the Mac - it is from Google but it is not th eonline version (although it integrates to that) - it is local to your mac - You will have to seperately research its abilities and if it will meed your needs
NAS gave me same options so was not utilizing picasa for a long time.
OK - but you can not use your NAS for their iPhoto library so people are suggesting alternatives
Regarding file structure need to explore if I can change it on NAS.
You can not - a NAS is not a disk drive - it is a headless computer and it has its own file system that can not be changed -
You either need to change what you want to do and use iPhoto the way it works or change the software you use to a system that will work with your NAS
Once again You can not use either iPhoto nor Aperture with their libraries on a NAS
You could use Aperture in a referenced mode with the original photos on the NAS and all of the edits, changes, etc on your mac
You can use other programs - Picassa is a potential - and a Digital Asset Manager (DAM) discussion site will have others - there are soem that work fine with a NAS
LN

Something running major after switching from Windows to Mac OS X. Any Ideas

I have been experiencing one issue when I transition from Windows back to Mac. It seems like the hard drive is being scanned or something big is running. It slows down Mac until it has finished doing what ever it is doing in about 20 minutes. I'm thinking that Mac is reclaiming space back or something, but it is doing it every time. How do I find out what is doing this and how do I stop it (if I can)? Is it something that will always happen? Did I set something in bootcamp that I can unset maybe?
Thank You for Your Help.

Finally figured out the problem on my own. My external hard drive was named <Mobile 2.5">. In this thread I read about others having a problem when their hdd was named in a comparable way (e.g. <storage for 21" iMac>).
I renamed my drive to <Mobile 2.5> and the problems are gone!

I can no longer receive standard text messages from iPhone users after switching from iPhone to Galaxy S4

Can i unregister my cell number from imessage without unregistering my product from apple?

Yes. http://support.apple.com/kb/ts5185

Trouble syncing iPod Classic after switching from Windows XP to Mac OS X

I'm using an 80 GB iPod Classic (the first iPod classic to come out) and I've had it for a little over two years. Ever since I've had it, I've been syncing it with a Dell Inspiron 1501 with Windows XP Professional. Haven't had any problems since buying it.
I recently bought a 13-inch Macbook Pro, and spent a long time transferring my music from my Windows computer over to this one. When it was done, I formatted my iPod Classic for Mac and tried to sync my library. It works slowly and steadily until the syncing freezes at a random song. Usually after about 700-800 songs is when this happens.
Then my iTunes starts moving very slowly and it's impossible to get the iPod to stop syncing or eject properly. I had to force quit the program and eject the iPod's disc before I could try again. I struggled with syncing in this way about 3 times before I gave up. Now I'm trying to add music manually, a little bit at a time.
However, every time I eject the iPod to see if my songs are getting put on there, it says there is no music. When I go to the "about" screen, it says I have memory on the device, but none of it is music.
I've tried reformatting through iTunes and erasing the disc using disc utility. Anything else I should do?

There are plenty of topics on this very question which gets asked fairly often depending on your search criteria.
Short answer is no.
The OS X license agreement provides for installing and using it on a single Apple branded/labeled computer only.
The only way to install Tiger on a PC is via a hack of some sort and even if the hack is successful, very little on your PC would be supported and the overall performance would not be worth the trouble.
> I was reading an artical and found out that the Mac OS X Tiger already has many of the things that the new windows vista has.
What you read is correct and it took Microsoft 5 years to come up with what amounts to a copy of OS X. I read there are 10 separate/different versions of Vista to choose from? How on earth is the average person (or even the above average person) expected to wade through all that confusing mess?
Apple is getting ready to launch a new OS X version called Leopard this spring which will place Windows even father behind.
If you want to run Tiger and Vista, purchase an Intel Mac which gives you the ability to run both operating systems natively on a single computer.

After switching from Windows to Mac, my iPod says "No Music"

I have an 80GB iPod Classic. I used to use a Windows machine, but recently switched to a MacBook Pro. Last night, I copied all of my music over to my Mac, and added some new stuff since I have more hard drive space now. I synced the iPod. All of the files are showing up in the iPod file browser within iTunes. So the media is there. However, when the device is ejected, the only media it says is available is photos. Meanwhile, it does say that I have used 68GB.
Although I have never had a problem with the device, I feared there could be a hardware issue, so I ran the onboard diagnostics. The results were:
For Retracts: 9
For Reallocs: 16
These numbers are low, so I don't think it's hard drive failure.
Do I need to do anything to reformat to Mac, other than what I did within iTunes?
Please help. I'm bored and need my iPod to work!
Thanks in advance.

Hi!
Make sure you authorize the new MacBook iTunes first, and you're good to go, no need to reformat! Hope this helps!
Sandygirl

Blurry font after switching from WinXP to Win 7 (Was:Schrift im Dreamweaver CS 3 verschwommen)

<Preran> For the benefit of moderators here, I used Google to translate your content into English:
Good day,
I have problems with blurry font in Dreamweaver CS3 after switching from Windows XP to Windows 7
I have already tried the following:
In "Edit" Preferences "change font size" - unfortunately that does not work. (which had worked fine in the previous changeover to Windows XP)
Then I got in the forum www. office-loesungen.de the tip, sometimes seen on the control panel display, which percentage is set.
When I got the set to the mean value, the writing was not so blurry, but still not really readable.
Experiments with Clear adjust TypeText were not successful.
There is a trick, so the font is larger
If I have to "small" hinders the size that was at 0.75 in the previous pages, it is readable for me, so I could enter the text and read it.
However, the text is then when uploading larger.
What can I do now?
For speedy help I would be grateful
Best regards
Guten Tag,
ich habe Probleme mit verschwommener Schrift im Dreamweaver CS3 nach der Umstellung von Windows XP auf Windows 7.
Ich habe folgendes schon probiert:
Bei „Bearbeiten“ und Voreinstellungen „Schriftgröße ändern“- das funktioniert leider nicht. (das hatte bei der letzten Umstellung auf Windows XP wunderbar geklappt)
Dann bekam ich im Forum www. office-loesungen.de den Tipp, mal über die Systemsteuerung-Anzeige zu sehen, welcher Prozentwert eingestellt ist.
Als ich den auf den mittleren Wert eingestellt habe, war die Schrift schon nicht mehr ganz so verschwommen, aber immer noch nicht richtig lesbar.
Auch Versuche mit Clear Type Text anpassen waren nicht erfolgreich.
Einen Trick gibt es, wodurch die Schrift größer wird
Wenn ich die Größe, die bei den bisherigen Seiten bei 0,75 lag , auf „klein“ verstelle, ist es für mich lesbar, ich könnte den Text so eingeben und auch lesen.
Allerdings wird der Text dann beim Hochladen auch größer.
Was kann ich jetzt tun?
Für baldige Hilfe wäre ich dankbar
Mit freundlichem Gruss
Renate Gundel

I've done this multiple times and it produces essentially the same message, but there is a mention that a restart is pending. This is also strange because this is definitely not the case. First time I used CScleaner it took a while and was obviously busy correcting something. However now when I select clean all, it simply dumps anopther massive log file into AppData and says cleaning completed successfully. Now I just ran it again, so would you like me to post the more recent log file?

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

When I changed my ATT email password, I can no longer open my email in my Iphone, even after updating my password. What do i need to to do?

When I changed my ATT email password, I can no longer retreive my email on my Iphone, even after updating my password in my Iphone. What's wrong? How do i fix it?

make sure the outgoing (smtp server) has the updated password also. settings>mail,contact,calendars>then at account>it will say outgoing, smtp or advanced. after clicking on the smtp it will have an option to change that password, delete it and add ur new one

Album covers missing or mixed up on iPhone/iPad after 4.3.5 update. Only purchased songs affected. What can I do to solve this issue?

Album covers missing or mixed up on iPhone/iPad after 4.3.5 update. Only purchased songs affected. What can I do to solve this issue?

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

NI-4060 giving invalid 1st reading after switching from or to LOW Resistance Measurements

We've been using TestStand & LabView to test various Circuit board. On series of test involves checking for a short circuit (Measure Low Resistance 4-wire) then measuring for a 3.5Vrms signal on another part of the board.
For each measurement, the following NI-DMM VI's are used in order:
niDMMInit, niDMMAutoZero, niDMMConfigure, niDMMMeasure, niDMMClose.
If we do the Low Resistance 4WR measurement, then a AC V measurement, the 1st reading from the DMM is approx 10x too high, if a 2nd reading it done it is then OK.
It doesn't matter how long a delay is before we take the 1st measurement, it's always approx a factor of 1E+1 out.
If however we don't do a Low Restance prior to
the AC V measurement, then the measurement is always correct.
I expermented with turning AutoZero on & off, and various resolution settings, however none of these seem to have an effect on the result.
Can anyone explain these strange results?
Thanks
Simon Holman
Simon Holman
Software Engineer
Certified LabVIEW Developer
Certified TestStand Developer
measX GmbH & Co. KG.
http://www.measx.com

Thanks, after playing with a few more settings I found if I turned the Cacheing off niDMMInitWithOptions, with "Cache=0" that everything worked fine, but it would take a couple of seconds to get the first AC measurement after switching from resistance.
Simon
Simon Holman
Software Engineer
Certified LabVIEW Developer
Certified TestStand Developer
measX GmbH & Co. KG.
http://www.measx.com

Greetings. Do you know if an unlocked Iphone 5S can switch from CDMA to GSM with a sim card, or if you have to choose one capacity or the other when you buy the phone? Many thanks.

Greetings. Do you know if an unlocked Iphone 5S can switch from CDMA to GSM with a sim card, or if you have to choose one capacity or the other when you buy the phone? Many thanks.

Is this a Verizon or Sprint iPhone 5S?

After switching from SUNJVM to SAP JVM on Netweaver 7.0 server

After switching from SUNJVM to SAP JVM on Netweaver 7.0 server the b2b application and the xcm configuration detail cannot be accessed
it gives the following error.
#1.5 #00059A3C7800006D0000002C000015980004B30C3E45830D#1322765072300#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#niit.com/b2b_niit#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#0##n/a##820feec01c4c11e1c79300059a3c7800#SAPEngine_Application_Thread[impl:3]_32##0#0#Error#1#/System/Server/WebRequests#Plain###application [b2b_niit] Processing HTTP request to servlet [action] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [b2b_niit/servlet/action].
Exception id: [00059A3C7800006D0000002A000015980004B30C3E457F63]#
#1.5 #00059A3C7800006D0000002D000015980004B30C671A5D9B#1322765757605#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#niit.com/b2b_niit#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#0##n/a##1a892d501c4e11e1b99700059a3c7800#SAPEngine_Application_Thread[impl:3]_32##0#0#Error##Plain###application [b2b_niit] Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [b2b_niit/servlet/action].
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:330)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:354)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NoClassDefFoundError: com/sap/isa/core/ActionServlet : cannot initialize class because prior initialization attempt failed
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at java.lang.Class.newInstance0(Class.java:310)
     at java.lang.Class.newInstance(Class.java:263)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:319)
     ... 14 more
Caused by: java.lang.ExceptionInInitializerError
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at java.lang.Class.newInstance0(Class.java:310)
     at java.lang.Class.newInstance(Class.java:263)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:117)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:386)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
     ... 4 more
Caused by: org.apache.commons.logging.LogConfigurationException: java.lang.reflect.InvocationTargetException
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:532)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
     at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
     at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
     ... 13 more
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:525)
     ... 17 more
Caused by: java.lang.NullPointerException: while trying to invoke the method com.sap.tc.logging.Location.debugT(java.lang.String) of an object loaded from field com.sap.isa.core.logging.sla.IsaLocationSla.location of an object loaded from local variable 'this'
     at com.sap.isa.core.logging.sla.IsaLocationSla.debug(IsaLocationSla.java:583)
     at com.sap.isa.core.logging.sla.IsaLocationSla.<init>(IsaLocationSla.java:46)
     at com.sap.isa.core.logging.IsaLocation.getInstance(IsaLocation.java:52)
     at com.sap.isa.core.logging.StrutsLog.<init>(StrutsLog.java:25)
     ... 22 more

Hi,
That particualr error should be solved by adding the following parameter to your instance profile:
jstartup/vm/parameters = -XX:-ExtendedExceptionMessages
The issue is related to note 1693118
Kind regards,
Cathal

How do I sync email across the IPhone, IPad and Macbook Pro

How do I sync email across the IPhone, Ipad and Macbook Pro?

You can use IMAP for your mail accounts.
<Link Edited by Host>

Emails disappearing on iPhone & iPad after switching from Windows Live to Outlook on PC

Similar Messages

Maybe you are looking for