Emails not being generated using UDF

Hi,
We had setup a functionality to send email via UDF using the following blog.
Mail without email adapter? Part - I - Process Integration - SCN Wiki
This worked fine for some time. However, it does not generate emails anymore. There were no changes done on the objects. We checked the java mail service settings as suggested in some of the SCN posts and everything looks configured fine.
We are not able to determine what is preventing the emails from being generated. Any pointers would be really helpful.
We are using SAP PI 7.31 java only installation.
Thanks,
Ravi

Hi Ravi,
Did you check SMTP services availability?
SMTP Configuration in SAP XI - Process Integration - SCN Wiki
Regards,
Krupa

Similar Messages

'requestblock' emails not being sent

I had a similar post on the ticket confirmation auto response email. It is not a question of emails not being generated at all - the order confirmation mail is being generated fine so I know the messaging is working to some degree, but I have created a form using requestblock.ascx and although the records are generated in the Contact log in the WT db there are no outgoing emails created.
As before the only evidence of failure of any kind is:
1) Event Viewer Application Log : SAPB1WTMS Thread was being aborted at NetPoint.MessgingService.NPMessagingThread.Work()
2) Webtools log Message type I module sender SendingQueue is disabled
I am using SP01 PL01 for this
Can anyone offer any suggestions as I am sure someone is successfully using the requestblock.ascx to generate emails

I have noticed that in Config>messaging I did not have SendQueue ticked.
Having ticked it I got the missing mail messages created

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

SWF File not being generated by compiler

I am using Flash Builder 4.5.
One of the modules that compiles without error is still not being bound into the runtime image (in this case debug).
There are no compiler errors (auto build is switched ON) but a swf file is not being generated.
I have tried removing the reference to the module in the Project ->Properties->Modules window and then adding it back in to no avail.
This was working up until I made a change to the module in question and then saved it.

I would check all imported images in the library. If you cannot see the image in your library preview; there is a good chance that there is an issue and it will need to be reimported.

Spool file not being generated in production server

Hello
Our end users are using automatic payment program F110 to print multiple cheques.
The settings in SPAD are identical in Quality and Production Server,but some how
spool file is not being generated in production.
Test printing is fine in Quality server.
Printer being used is Epson LQ 300.Device type is EPESCP2.
We are using z custom page size ,and it is assigned to printer device Type as well
Would be very great if some can can comment on which settings to check,as SPAD setting is
same in both server ,yet no spool.Very Very urgent.
Iam not sure ,whose domain is it now-BASIS or ABAP.
Thanks a lot
Nouman

If there is a problem with the spool, the variant that is being in F110 parameters.
As you are saying the quality system is working fine, please compare both the variants in Production and Quality systems.
This should solve your situation.

Reports not being Generated

I use Crystal Reports with another program that supposed to generate 2 reports with a click of a button, but it is not working. The reports are not being generated. I installed Crystal Reports on my system twice and there doesn't seem to be a problem with the installation, but the program is not working. Please help.

I am fairly new at this so let me try my best to answer these questions:
Crystal Reports XI
Visual Studio? Not sure
No service pack applied. How and where do i get it?
I am using Windows XP
I am not viewing the reports as it has to be generated before i am able to view and the systems does nothing after I click the generate button
No have not tried to view a single report; i don't know how.
I have not used Crystal reports designer for anything else.
Edited by: Sharon Aird on Dec 1, 2008 5:05 PM

TA1 Acknowledgement not being generated.

Hi All,
I have a requirement for the Inbound 820 to generate 999 and TA1 Acknowledgement. 999 is fine but TA1 is not being generated. I tried changing the ISA14 element to '1' from '0'(by referring http://docs.oracle.com/cd/E28280_01/user.1111/e10229/app_ta1.htm), but of no use. The ISA of the EDI file is as follows
(ISA*00* *00* *30*905454545 *30*805454545 *130315*0758*^*00501*100000174*1*T*\~). I am using B2B 11.1.1.6.
Please help me out with some suggestions.
Thanks in Advance!!
Edited by: soa999 on Apr 15, 2013 4:17 PM

I am using B2B 11.1.1.6.TA1 Ack feature has been introduced in PS6 (11.1.1.7). So please use PS6 (11.1.1.7) to get benefit of this feature. If you cannot use PS6 then raise a SR with support to check if you can get a patch on top of PS5 (11.1.1.6) to use this feature.
Regards,
Anuj

Emails not being downloaded from BTYahoo to Outloo...

Since Thursday have had a problem with emails not being forwarded to my Outlook in box, this is about the third time this has happened. I did notice that some else has posted with the same problem. Any ideas on how to unblock the system! The only other solution is to get through to BT Help in India! Must admit they were very helpful last time this happened. Any solutions greatly appreciated, bearing in mind that I willl have to go to my BTYahoo page to see any solutions. Many thanks. caravanlady

caravanlady wrote:
Since Thursday have had a problem with emails not being forwarded to my Outlook in box, this is about the third time this has happened. I did notice that some else has posted with the same problem. Any ideas on how to unblock the system! The only other solution is to get through to BT Help in India! Must admit they were very helpful last time this happened. Any solutions greatly appreciated, bearing in mind that I willl have to go to my BTYahoo page to see any solutions. Many thanks. caravanlady
Hi.
It seems that more and more people are experiencing issues using Outlook, however the problem is more likely down to a couple of reasons.
If could be an Outlook account corruption - so creating a new account in Outlook with the same email details may work. Also logigng into webmail (BTYahoo!) and moving the latest Inbox emails into a temporary folder. Then move a few at a time and retry Outlook, in case there is a corrupt email which can be dealt with separately.
Do you keep all the emails on the server ? If so, there is a chance that this could cause issues with any mail client program such as Outlook - as they have to index the emails so that they don't download ones already seen.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Default Personnel No. Ranges not being generated through NUMKR

Default personnel number ranges according to the company / client are not being generated. what should I do further to fix the problem?

Hi first go to PA04 and maintain the different number ranges as stated above.
01 1 to 2000
02 2001 to 5000 etc
here 01, 02 are different number ranges.
In your case maintain a number range number 6 with a range as per your requirement.
Then go to PE03 NUMKR feature.
Create subnodes using Personnel Area with a return value as the number range number.
So in you case decision tree should look like should look like
NUMKR
WERKS
GUJ1 ( PA for Gujraat)
06 ( return value = number range number )
Hope this helps.
Ajay

I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed?

I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed? Please help!

That is about normal. You can maximize battery life by changing some settings. See:
Apple - Batteries - iPod
Apple will exchange your iPod for a refurbished one for with a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. You can purchase a replacment for about $10
iPod Touch Repair – iFixit

BPM alert not being generated

Hi guys,
I'm having quite a little trouble in doing one thing which has been done for several times but which is giving me a hard time...
I've created a bpm process which in an error condition will trigger a simple alert.
I've tested the process and everything goes allright, except the alert. What is happening? Well, the alert is not being sent to my inbox. Why? Maybe because the alert is not being generated.
I've went to sxmb_moni_bpe and everything is OK. I can see the message of the alert being fired. After that I went to slg1 to see if my alert is being generated, and the answer is no. It's not being generated....
I've gone through Michal's blogs and everything was checked...The question is, if I execute RSALERTTEST with my alert category, the alert is generated and send to my inbox. Do you have any ideas?
Thanks a lot for your attention

Hi,
Yes the job scheduling is needed only for Sp14 and below.
Can you recheck if the Alert is actually getting triggered or not in the BPM in the control step? Make sure that you have given the correct Alert Category in your Control Step and also, make sure that the recipient in your alert as well as the Alert Inbox entry you are seeing is the same.
Finally, refresh the Alert Inbox.
Regards,
Bhavesh

ADDM report not being generated

I noticed that addm reports are not being generated from last 2 days. So I did the following:
SQL> exec dbms_workload_repository.create_snapshot;
BEGIN dbms_workload_repository.create_snapshot; END;
ERROR at line 1:
ORA-13516: AWR Operation failed: only a subset of SQL can be issued
ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 10
ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 33
ORA-06512: at line 1
I got above error. I am not sure what that means. I also ran below SQL:
SQL> select nam.ksppinm name, val.KSPPSTVL, nam.ksppdesc description
2 from x$ksppi nam, x$ksppsv val
3 where nam.indx = val.indx and
4 nam.ksppinm = '_awr_restrict_mode'
5 order by 1
6 ;
awrrestrict_mode
FALSE
AWR Restrict Mode
What could be the reason that the reports are not being generated anymore

Check Note:308003.1 - AWR Snapshots Not Generating

Start Menu Configuration not being saved using BootCamp in Windows 7

On a couple nearly identical MacBook Pros (ordered and built within the last couple months) I've encountered an issue where my Start Menu configuration is not being saved using BootCamp in Windows 7. Only the 64 bit version was tested, I don't have a 32 bit handy.
"Stickying" icons on the top of the shortcuts seems to hold, but changing the display to small icons, adding "administrative tools", menu displays from opening folders to showing lists, or even just telling it to not highlight newly installed programs are lost on a reboot. The changes do appear to work at first, but again, are lost on reboot.
Fwiw I'm using the machine in an Active Directory environment. If you need any additional information or further details just ask.

On a couple nearly identical MacBook Pros (ordered and built within the last couple months) I've encountered an issue where my Start Menu configuration is not being saved using BootCamp in Windows 7. Only the 64 bit version was tested, I don't have a 32 bit handy.
"Stickying" icons on the top of the shortcuts seems to hold, but changing the display to small icons, adding "administrative tools", menu displays from opening folders to showing lists, or even just telling it to not highlight newly installed programs are lost on a reboot. The changes do appear to work at first, but again, are lost on reboot.
Fwiw I'm using the machine in an Active Directory environment. If you need any additional information or further details just ask.

AC 5.3 Critical Action Alert Emails not being sent

HI:
We have set up Critical Action alerts for a couple of transactions and while the on-line alert logs are being generated correctly, the alert email is not being sent to the Risk Owner.
Does anyone know where I can trouble shoot this issue?
Thanks,
Margaret

>
Alpesh Parmar wrote:
> Margaret,
>
> Have you set up the SMTP server in visual admin? RAR needs to use this server details to send out an email.
>
> Alpesh
Hi AlpeshMargaret,
Where are the instructions for setting up the SMTP server in visual admin for the purpose of Alert Generation? I am not seeing this in the Configuration Guide. Could you point me to the correct documentation?
Thanks!
Jes

Check Number not being generated

We do not have SAP Check printing functionality activated right now. So the checks will be handwritten. When i created the Payment Method for check, I assigned RFFOEDI1 in the payment medium program. I also created the check lot for that House bank and Company code in FCHI. I created a variant for RFFOEDI1 although i dont really need anything printed. Now when I am executing payment run, the payments are being posted fine. The check number is not being populated. I checked the Register (FCHN) and there are no entries. The Vendor has CHeck payment method in the master record and the payment method is also assigned as "Checks" in the Invoice.
Not sure what is wrong. Help is highly appreciated.

Hi,
In case you use the check printing program from SAP, it will generate the check information and will assign to the documents automatically. However it is upto you whether you need to print the checks or not? But the check numbers have been generated by SAP. You can manually create the check for the payment documents matching those check numbers.
The only thing is that the manual control should be there so that the check is manually created with same number as system generated in payment run. (Otherwise, do not generate check in F110, rather create check manually and assign to payment document in FCH5.)
Regards,
Gaurav

Emails not being generated using UDF

Similar Messages

Maybe you are looking for