Emails with filelink attachments still include tiny files as attachments

This question is the second part of my previous question (https://support.mozilla.org/en-US/questions/989074 ). I use filelink feature of Thunderbird a lot for attaching big files. Everything thing works fine, however the email recipients keeps getting some tiny files attached with the email. These files are usually very small (few bytes) and are not related to the actual files attached in content. Also the number of these tiny files is always same as the number of file attached using filelink. See screenshots below. This has been a source of confusion among some of my co-workers.
Is this intended behavior? If not, any idea what could be wrong with my setup?
Screenshots:
http://imgur.com/a/Cy8XA
https://support.cdn.mozilla.net/media/uploads/images/2014-03-09-17-01-05-2f33c4.png
https://support.cdn.mozilla.net/media/uploads/images/2014-03-09-17-01-10-34be95.png

This may be an MS Exchange problem. See if this article helps.
http://kb.mit.edu/confluence/pages/viewpage.action?pageId=4981187

Similar Messages

  • Converting Microsoft Outlook Emails with JPEG attachments to a pdf

    Hi,
    I have emails with jpeg attachments.  When I open the email message and clikc the "Convert to PDF", the message is converted to a pdf but the pdf does not have the attachments. I'm assuming there is some setting for this that I can't seem to locate. I have Acrobat X
    Thanks
    Rick

    Hi Jay,
    You can use the 'Acrobat' plugin in Outlook and select the messages or folders to convert to pdf
    The attachments of the mails will be included in the attachment section of the pdf files.
    Regards,
    Rave

  • Emails with large attachments failing to download.

    I have a problem downloading emails with large attachments (6500KB plus) in Incredimail which I believe is a McAfee NetProtect Plus conflict. When downloading Incredimail shows "RECEIVING", number of emails and the percentage downloaded. With large files it will hang flashing RECEIVING but not increasing the percentage. Task manager shows Incredimail using lots of CPU and also McAfee coming in and out but no traffic on the network.
    The only way to stop this is to cancel receiving and try again. Sometimes this clears it, after two or three attempts. Sometime I have to log onto BT Yahoo mail and delete the large attachment. A side result is that I get emails duplicated because they are still on the host when I cancel and are thus downloaded again. If I boot in safe mode and just start Incredimail then everything downloads in seconds, so I am convinced that it is McAfee scanning that is causing the problem.
    Any suggestions please?

    You are not alone experiencing problems downloading attachments to MS Outlook etc see:-
    Problem with large email downloads in Outlook Expr... 
    I have just been told by the helpdesk there is a 10MB limit, so you should not have a problem.
    Duplicate e-mails are due to session not completing. I have had this problem as well.

  • Can't delete email with large attachments

    Received two email with large attachments (photos in format that iphone doesn't recognize). Now can't delete or move to trash these two email. They just return to inbox and mail freezes, goes black, or returns to home screen. Clearing out all other mail in trash doesn't help. Reset doesn't help. I can still receive new email to my inbox and delete those just fine, but these two large email with attachments are stuck in my inbox.

    Well, I have the same problem. I tried to delete the specific account and redo it - but the ** email was still there. I've gone to the webmail site for the account, and deleted it there. It's deleted from my laptop, but keeps coming back on my iPhone. So, my iPhone is set to show 25 emails, but I don't understand what you mean by "send yourself 25 messages". Sounds like your solution works, and I'd sure like to try it. Looks like Apple needs to come up with an easier solution too. Thanks.

  • Mail hangs when I try to open emails with certain attachments

    When I try to open emails with certain attachments, rather PS files (if I recall correctly) it hangs. It seems that Mail is trying to load the PS file for me, and maybe convert it to PDF, which take awful lot of time.
    So at the moment I cannot do anything! Because even if I force quit, and start the Mail program again, it tries to open this same email again!
    My question is: How can I prevent Mail from automatically loading attachments? I would the same for images etc. I want the power to load and view attachments whenever I want them to load.

    Do you keep the message preview pane open?
    If so, close the message preview pane below the message list by double-clicking on the horizontal divider bar that separates the message list from the preview pane.
    This will require double-clicking on a message in the message list to open it. If you have the Attachments and Message Size columns selected for the message list, you can select when you want to open a message that contains a large attachment or attachments.
    If this is for a POP type account, there is no setting in Mail to prevent a message attachment from being loaded when opening the message if the message with attachment has been downloaded from the server.
    Have a look at Mail Attachments Iconizer.
    http://lokisw.com/index.php?item=MailAttachmentsIconizer

  • Can´t send emails with pdf attachments - why?

    Since i moved all my accounts to my new airbook (OS X 10.8.2) everything works fine BUT i am not able to send emails with pdf attachments.I have an exchange and a mac.account - but they both won`t work.
    The emails stay put in the local ausgang? exit box and won`t move away unless i delete them.
    i checked the accounts, the activity - all says it works fine - but it doesn`t!
    Maybe in the *deep* of my mac is one thing that says no pdf - but where can i find it?
    I appreciate every helpful hint :-)
    greetings

    it tries to send the email for about five minutes and than gives the message *server doesn't work* you want to try another? repeat? or later?
    when i change the server e.g. from exchange to mac - tries again and without further notice i find the message in the outbox - even when i click that one and *send* again - nothing changes......
    I already tried to name the attachments in.pdf - i also change the pdf to jpeg - nothing works - all emails i write after that go immediately to the outbox - so when i want to send messages at all i need to delete the ones with the attachment or send the other ones manually
    Please notice in the activity window there is a lot of traffic :-) but it doesn`t help
    i even closed all other programmes like excel,safari and stuff - but still
    and i still have al lot of free GB on my airbook....
    any idea????

  • Emails with large attachments not arriving

    We have an open limit on email size but consistently emails with large attachments do not arrive at the destination (even to the same domain). They do go into the clients sent box. Any thoughts on how to trouble shoot? thanks

    John H wrote:
    The command tells me I have 0 message size limit
    The limit in the admin server is set to 1000MB
    For gigabyte-class file transfers, you'll really want to use a different path — that message size is easily approaching a denial-of-service scale message size, if not exceeded it.
    If you really want to try doing attachments of that size and all the intervening SMTP servers support it, then try setting the message size manually via something like the (untested) following commands:
    sudo postconf -c /Library/Server/Mail/Config/postfix  message_size_limit  -e  "message_size_limit = 10485760"
    sudo postfix reload
    Or to whatever specific attachment size you want to try to use.  The unit is in bytes.
    The other Postfix setting that tends to get involved here is mailbox_size_limit, as well as whatever quotes might be in use for the specific users.

  • I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I hav

    I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I have been using Apple products for years, always touting their reliability and customer service. I am not a techie, I just want to be able to do what I do on the computer and Apple always fulfilled my needs. Now I am told because of some operating system gobbledygook, I have to go out and purchase new software to use Word. This is despicable. I see no particular benefit to using Lion, but I do see a lot of detriments. Apple now seems to have turned into Microsoft, making software obsolete so they can make more money and to **** with the customer. You can be sure that my next computer will be a PC. I have completely lost confidence in Apple.

    I seem to never tire of saying this. It was for Apple when they first announced 10.7 to disclose this. Yes, it was widely reported -- or rather, rumored -- but not by Apple. And many people who have gotten caught by this assumed that Apple itself would have told them beforehand about the loss of this very important feature which they had come to rely on. As far as I know, not even in fine print, does this appear anywhere on the Lion announcement or any of its links.
    I am not saying Apple had to continue Rosetta in Lion, or forever, just that if it was going to be dropped, it should have been made known.
    As relative "insiders" we should not forget that many people don't have the time, habit or interest to do this kind of research. I think it is a breach of trust that Apple has never directly made this announcement or given people the opportunity to decide beforehand if giving up their PPC apps for a new OS is a worthwhile tradeoff.

  • My yahoo email account is not accepting emails with picture attachments. The Internet provider says it is yahoo. Yahoo had nothing to offer.  Do I have to adjust settings on the iPad?

    My yahoo account is not accepting emails with picture attachments. Other wifi features are working. Other iPad and iPhone devises using this wireless router are accepting photo attachments. How do I have to configure my ipad2 to accept photo attachments on it?

    This did not help, thanks for the suggestion but my settings match this description on both devices and no result.

  • Can't send emails with picture attachments

    All of a sudden, I can't sent emails with picture attachments. I last tried this a few weeks ago and it worked, now it doesn't.
    I have tried a battery pull while the phone is on, registered on the network again and had the service books resent and nothing works.
    Anyone else have this problem or have any ideas of how to fix it?

    Can you please provide more information? Are you getting any error message when attaching or sending the pictures? Are you able to send other types of attachments? Is this happening for all email accounts on your BlackBerry?
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Office 365 json api | send emails with inline attachments

    I send the description my team is having with the json integration with Office API 365.
    We want to send an email with inline attachments through the JSON API.
    With that objective, what we are doing:
    1. Create an empty draft message;
    2. Send the several inline attachments;
    3. Update the body of the draft message (with cid images inline);
    4. Send the message;
    What is are our issue with the API?
    We are unable to set the "ContentType" properties when we submit the attachments to the Office API 365.
    Despite the "ContentType" we send, it is always null.
    We are using the following API: POST https://outlook.office365.com/api/v1.0/me/messages/{message_id}/attachments
    That's the reason we think that despite the inline image then it is found in the body, it cannot be displayed because the contenttype it is not set correctly.
    Please give us some direction.
    Best Regards,

    Answered here:
    http://stackoverflow.com/questions/27377376/how-do-i-send-email-with-inline-attachments

  • Mail only downloads headers of emails with large attachments

    Hi-
    I have Maverick.
    My mail is delivered though an Exchange Server.
    At present emails download fine UNLESS they have a large attachment.
    If they have a large attachment, the email will appear in the central "preview" pane with the address of the sender and the subject line, but will otherwise not download.
    The email will only start to download once I click on the email in the preview pane. This can be laborious if I have 50+ emails with large attachments.
    How do I configure mail so that it will download the emails, irrespective of the size of the attachments.
    Thanks,
    Richard

    Some problems with Exchange mail have been solved by disabling Autodiscovery.

  • Send email with multiple attachments using MS outlook

    Hi,
    Is it possible to send an email with multiple attachments using MS outlook. (Using activex)
    Regards,
    Neha

    nehrnul wrote:
    Hey thanks for the reply. I'll try that way also.
    but currently my requirement is to send email using MS Outlook. And I found 1 solution using invoke node
    Regards,
    Neha
    That' "requirement" sounds like it was written by someone who is trying to drive the design of the application.  Without knowing your personal situation it's hard for me to say, but if I had to guess I would say the real requirement is to send an email with multiple attachements, and the person giving that requirement thought sending it through Outlook would be the best way.  You should get clairification on what the real intend of that requirement is.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • On my imac, All of a sudden I am unable to send original emails with any attachments.  I can attach the file but when I try to send it, it won't send.  Also, if I am emailing back and forth as it gets longer, it no longer transmits

    On my imax, all of a sudden I am unable to send original emails with attachments of any size.  I can attached the file but when I try to transmit, it will not go.
    Also, if I am emailing back and forth, once there gets to be several threads, it will no longer transmit.  Any suggestions. I am using gmail in the apple mail system

    Mike,
    Are any of your other applications going wonky, or is it just Logic?
    I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer.  Then I would launch Logic and see if the problem has been corrected.  It's amazing how much these two steps can accomplish.
    If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

  • Dunning letter via email with invoice attachments

    Hi Experts,
    We have requirement where in dunning letter should be send to customer via email along with invoice attachments.
    We have copied standard script F150_DUNN_02 to custom one as per requirements and configured it in SPRO. We are using BTE 1040 to fetch the customer email address and assign it to structure c_finaa-intad.
    This serves the purpose partially. The email goes to customer with dunning letter as an attachment properly.
    The question here is how to send additional invoice attachments in the same mail? For example, if dunning letter contains 3 line items, then email should have 4 attachments( 1 dunning letter and 3 invoices).
    Is it possible by some config steps? or please suggest me suitable approach to solve the problem.
    Appreciate your help.
    Thanks
    Swati

    Hi Partha,
    Here are the steps that you can follow :
    1. Using following SPRO path assign the dunning form.
    Financial Accounting (New) > Accounts Receivable and Accounts Payable > Business Transactions > Dunning > Printout > Assign Dunning Forms
    2. There is standard BTE (00001040) that is provided by SAP which is called when dunning is run. SAP has also provided sample function module SAMPLE_PROCESS_00001040 to indicate how to use the BTE. The FM imports I_KNA1 strutcure and pass back structure C_FINAA.
    3. Copy the standard FM to custom Z-FM and using I_KNA1-ADRNR fetch customer email address. If email is maintained, set c_finaa-nacha = 'I' and c_finaa-intad - <email>.
    4. You can also set the title of PDF file in email by setting c_itcpo-tdtitle as per requirement.
    5. Goto transaction FIBF. Settings-> Process Modules-> of SAP Application
    6. Add new entry with Process 00001040, application FI-FI and function module as custom FM created in step 3.
    Above steps are enough if you want to send dunning email to customer. If there is a need to send invoices as an attachments along with email then there is a need to enhance the standard FM PRINT_DUNNING_NOTICE. I used following approach to achieve the purpose.
    a. I created another custom FM to send invoices which I am calling from PRINT_DUNNING_NOTICE. For this, I am using implicit enhancement option to modify standard code. With this option, I am able to send 2 emails back-to-back one with dunning letter and other containing all invoice attachments with respect to dunning letter.
    Let me know, if you need further guidance.
    Regards,
    Swati

Maybe you are looking for

  • Report in ALV

    Hi All,      I have arequirement, In that I have to display the due and overdue as per divison in each fiscal year as well as 0-30 days ,31-60 days and soon . Is there any predefined report for this. ANy one has any idea regarding this. Thanks in adv

  • Printer not configured at Invoice level (vf02) - Jetforms

    Hi all, Here i need to trigger an output for an Invoice for a particular printer, but when i checked at VF02, i found printer looking for was not configured !! And this invoice is maintained through Jetforms, so it needs to check at Jetform server le

  • Dialog prog. doubt

    hi alll, i've created one dialog prog. in that prog. i created inserted table control. in that control i placed two TXTNAME and TXTAGE (input/output field). BUT I activated, the folllowing error occurs during runtime : The txtname is not assigned to

  • I need to know where to go to submit suggestions or improvments

    i need to know where to go to submit suggestions or improvments to apps supplied by apple in the ios.  i have many suggestions that would make my life easier and would do the same for others.  i just do not know where to go to make the suggestion.  m

  • WL 5.1 & VisualAge 3.0

    hi, Weblogic claims to have "better support for VisualAge". what do they mean by it, how do you install it (is it a new integration kit). how do you work with WL5.1 and VisualAge for Java? peter.