Emails wont display properly

I like the Mail app: its easy to configure and most emails display properly.
Some emails, though, will not display at a readable resolution : the font is too small to read.
When I try to click / touch to zoom (as in maps or safari) in it doesn't work.
Is there a work around apart from going into the mail account via safari?

Thanks.
You are a mine of information

Similar Messages

Samsung HDTV wont display properly

I hooked my dual core Mini to my Samsung TX-P2670WH HDTV with a DVI cable. The text is blurry and I have to set the resolution at 640 x 480 just to make it out. The specs say it is 720p and 1080i compatible TV. No amount of tweaking with settings has helped. How do I get it to display properly?

It might be that your TV is always doing some kind of scaling and/or image smoothing regardless of the incoming signal. While this usually works really well for video, it will usually completely ruin computer output by making the image blurry.
Try turning off all possible "image optimization" settings on the TV and then setting the resolution as close as you can to the native resolution of the screen.
Note that on some TVs it is impossible to completely turn off image scaling so you will always end up with somewhat unclear picture. The effect is very similar to driving your LCD monitor on a resultion that is different than its native one.

All of a sudden my yahoo email wont display correctly (shows some links for inbox etc but they arnt clickable and no emails are displayed) and the links on facebook (notifications, home etc) dont display but facebook content does.

Yahoo home page and yahoo email is not displaying correctly. It had been working fine until Saturday 9/10. When i load yahoo home page it will display content but some is not clickable and is not displayed correctly. In my email it will show the content on the left side (inbox, drafts etc and along the top (contacts, inbox etc) nothing can be clicked and no emails load or are shown. Facebook will load news feed content but will not display the icons at the left top (notifications, messages etc) they are clickable and work but the images just aren't there. Also not able to play games in facebook. The game loads up to 100% but never finishes. I dont go to many other website but i did check a few and they seem to be fine. May this be a website issue or firefox issue? i am able to use internet explorer to correctly see my email and facebook so assuming its a firefox thing.

Hi
Welcome, glad you got some benefit from the threads, it all so easy once you've done it a few times, aint it.
Glad your going well, now you can help others
you could also join the folding team and help medical research.
enjoy
cheers
jocko

Fonts wont display properly in Safari

I have to restart my computer about twice a day to get rid of the gobbledey-gook that comes up in my browser address bar
they look something like this --> *&^%((&$#@#
Also anything that uses system fonts to display the characters does this. This is also happening in my mail program and in SuitcaseXI.
I have stripped down my system fonts to the bear minimum and I have tried font cache cleaner but that doesnt work for very long. Is there a more permanent solution to this problem?

I'm not experiencing your problems but the Standard font in Safari is set to Times 16 and Fixed-width font is set to Courier 13.
See if that helps.

JMenuBar wont display properly.

I have a JMenuBar that when I implement it is seen on the JFrame but it is only the length of the buttons and when you go to click on it, nothing comes up, its just like a little thing comes out from beneath, but when you fully maximize the window it works fine just like in Firefox or such. I have tried to repair() and some other methods but none work, does anybody have an idea to get rid of this.
For solution I either need the JMenuBar o be fixed, or I need it to be there but to be hidden, so other classes can use it, but you cant see it. The reason for this is if ya get rid of it you get some nasty errors.

The javax.swing.JMenuBar appears but it is not formatted correctly for the window size. I would like to make it so it fits and works p[properly, Another option would be just to hide this JMenuBar.
I cant really post an example.

Outlook/hotmail emails not displaying properly on macbook

hi all i recently updated my Hotmail email account to Outlook it worked well until a few weeks ago.
On opening my emails instead of being shown across the page like normal,it shows up all down the left hand side of the screen???
has any one else noticed this ?
any advice on how to address this issue?
thanks

if you are receiving blank emails in Outlook, most likely you are not missing anything important, as these blank emails were originally spam or virus emails that got stripped by a zealous anti-virus or anti-spam software. To avoid them, simply configure
your anti-virus software to a less severe email scanning level.
nothing wrong with your Outlook installation! Such blank emails are usually leftovers from an anti-spam / anti-virus filter that actions between Outlook and your mail server. For example, the McAfee Internet Security Suite sometimes generates such blank emails
whenever it traps spam or virus emails (and you can avoid them only by uninstalling McAfee Internet Security). Also, AVG Anti-Virus’s E-mail Scanner can generate such blank emails, if it’s configured to scan and allow only certified emails.
Blank emails can also be generated by anti-spam services running on your mail server level. To avoid them, you have to check with your mail server administrator.
On special cases, these blank messages can be generated by encryption tools, such as PGP Desktop failing to decrypt the incoming message because of a conflict with a proxy server. On PGP Desktop, you can solve it by enabling the option “Use Email Proxy” in
the Tools menu
Aditya Mediratta

Blackberry Z10 Email Wont Send Properly

So, before postig this I contacted my ISP (Rogers), my websites hosting company and Blackberry and nobody can figure out what the problem is.
I have my email address setup through my domains hosting company. [email protected] I've never had a problem setting up emails on a Blackberry using BIS but am having one now (and I've set up my email on iPad, Playbook, Outlook, etc. and never had this problem).
On the Z10, I set up my email using the proper IMAP settings (verified with hosting company) and I can receive emails perfectly but when I send an email it shows that it sent and IMAP moves the email to the proper folder on my server (sent folder), but the emails do not actually get sent.
I've sent emails to five or six different email addresses and nothing seems to work. Does anyone know what I'm doing wrong here?
Rogers said it was a settings issue and to contact hosting company, I did that. Hosting company told me it may be a Blackberry settings problem, I called Blackberry who put me back to Rogers who are saying it's not a problem on their end.

If you're using a straight SMTP connection to send (rather than IMAP or Microsoft Exchange ActiveSync), this is a known issue with some versions of Z10 firmware.
Please see the following:
http://supportforums.blackberry.com/t5/BlackBerry-Z10/SMTP-API-faulty-on-BB-Z10/m-p/2231991#M10389
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-encoding-issue-in-outgoing-email/m-p/22321...
http://forums.crackberry.com/blackberry-z10-f254/heads-up-email-bug-recent-z10-os-versions-779341/

The videos wont display properly, there is a green ribbon at the bottom of every video, can someone help me?

the colors of the videos are let's say out of place, you can see patterns of red or blue in every video.

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Some HTML Emails Do Not Display Properly

Recently, some HTML emails do not display properly in Mail. All I see is HTML. Yet, 98% of my HTML emails render properly.
Any thoughts on why this happens with some emails? Is it a Mail issue or are these emails not coded properly?

Hello Tony.
Could be a combination but since Mail renders 98% of of all HTML messages properly (using Safari as the engine), this indicates it is a coding problem.
I'm not a big fan of using HTML with email since it introduces a number of problems. If everyone used Plain Text for message composition, the majority if not all problems experienced with email would be eliminated.

IMovie '08 Wont Open Properly

Hi Ever Since I Installed Leopard My Version Of iMovie '08 Wont Open Properly In The Dock Is Says It Is Open And On The Bar At The Top It Says iMovie '08 But No Window Opens And I Cant Make A New Project Or Anything. I Have Also Reinstalled It As Well And Still the Same Problem.
Does Any One Have Any Ideas?
Thanks

Actually after some digging around in the Apple Message Boards I found the problem. I went to system preferences, selected, displays, then chose "color" and pick any new profile. I chose the "srgb...." profile, then exited system prefs. When I opened iMovie... tada! it worked. Strange fix, but OK.

How do I get an imported an LDIF address book file to display properly?

x87, Win 7 64 bit pro. I backed up my address book by exporting an LDIF file to an external drive. My PC died and I bought a new one. I loaded Thunderbird 24.6.0 and imported the LDIF file. The addresses came in but they are not displayed in the address book properly. An address book folder named "TB Address Book 8-25-14" was created. When I select that folder the display to the right side of the window only shows a torso outline at the far left. The Name, Email, Chat Name, Organization, & work Phone fields are blank. If I select one of the entries and look at the properties, all of the data is there. If I move a contact to the Personal Address Book it still does not display correctly. However, there are two contact lists under the TB Address Boook 8-25-14 and if I select those sub-folders the data for each contact is displayed to the right. How do I get it to display properly so I can see what I'm doing? A friend of mine had a very similar problem importing into Thunderbird using Windows 8.

The problem fixed itself when I uninstalled ZumoDrive free cloud storage and also Growl the notifier application. Had to employ AppZapper to uninstall all related files.... but all worked a treat. All is back to normal.

Imorted barcode graphics in FrameMaker 10 are not displaying properly in my PDFs

I have imported barcode graphics (that were embedded in a Microsoft 1997 Word document and I don't have the original imported images) into FrameMaker 10. However, when I create a pdf and view it in Adobe Reader 10 or Adobe Acrobat 10.1.3 and then print the document, the barcodes will not scan. Some of the barcodes are code 39. If I print the FrameMaker document, the barcodes don't scan either. The barcode graphics also don't display properly in Microsoft Word, but they scan fine from the Word document and the pdf. I can get the barcodes to display properly in Word if I right-click on the barcode and select Edit Picture.
I have tried importing the Word document into FrameMaker, making bitmap images of the barcodes in Photoshop and then importing them into FrameMaker and trying to do a special paste into FrameMaker. However, the barcodes still don't look right, print right or scan at all.
I don't have a lot of experience with barcodes, graphics or FrameMaker, so any light that can be shed on this issue is appreciated.

OK, to simplify this a bit, a barcode is not an exotic specie -- it's just
a graphic file. If you embed a crisp .PNG or .PDF in FM it should print
correctly, no matter what the subject matter is.
What I'd do is either:
   - Select the graphics in Word and Save As Image to export them (or just
   save the Word file as HTML -- it'll write out the graphics as .JPGs, but at
   least they'll be there. Or
   - if the barcodes have a legend on them (usually numbers on the bottom
   of the code) just go to any of the online Bar Code generation sites and
   pump them in to get a fresh graphic.
Then:
   1. Save or convert the graphic to something besides a .jpg. --- a .png
   or PDF -- In Photoshop or another editing program, bump the resolution to
   300 dpi or so for print quality resolution. If necessary, convert it to
   black and white and clean up any grey edges.
   2. Import into Frame.
   3. Print to the Adobe Acrobat logical printer; don't use SaveAsPDF. Pick
   a job option that doesn't apply .jpg compression to images -- it'd be
   better not to downsample them at all.
Art
Art Campbell
          [email protected]
"... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl." -- Richard Thompson
                                                      No disclaimers apply.
                                                               DoD 358
I support www.TheGrotonLine.com, hyperlocal news for Groton MA.

MBP wont display 1080p on monitor any more

I have an early 2011 Macbook pro and a hp 2511x monitor. The setup worked flawlessly before I went off to school. Now that Im back home my macbook wont display 1080p on the monitor, only 720p. While attempting to display 1080p the monitor screen is blank but I am able to move my mouse over to the external dispaly just fine, just no picture. My mac will display 1080p on other external monitors & the monitor will work fine with other computers or xbox on 1080p.
Just upgraded from 10.7 to 10.9 and still not working properly.
Connecting from mini display to hdmi
Thanks!

Hey adz2k14!
Here is an article that will help you troubleshoot this issue with your AirPlay functionality:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

HT201210 I disconnected my iPhone in the middle of an iTunes update. Now it wont run properly what do I do?

I disconnected my iPhone in the middle of an iTunes update. Now it wont run properly what do I do? I was working online and I recieved a pop up from iTunes stating that there was an harwared update for my iPhone. I had it plugged up for a while , long enoung for me to watch a tv show have dinner and come back. I thought the update was complete and came back to the computer and unplugged it. The next morning I saw a picture of aUSB cord and the iTunes icon. I have no use of my phone and cannot get access to emails, internet contacts..nothing . Help !

Well it should NEVER be unplugged when doing something.
It actually had not installed the software at that stage, it had been copied over to the iPhone, it was being checked and then it would be installed.
You need to connect your iPhone to the computer at home and hope that you can install the software again and then restore your backup.
If you install iTunes at work you may be able to Restore the software but you will most likely lose the content on your iPhone as you do not have a backup to restore on that computer, or all your media / apps.

Fonts not displaying properly in PDFs in Preview

When I open a PDF in Preview, fonts are either substituted, or the text doesn't display at all.
PDFs display properly in Adobe Acrobat, however.
I've tried deleting Preview's preferences, to no avail. Any clues?

This is a constant problem for us too (on our new Leopard only machines), any program that uses the OS to display PDFs will keep dropping type.
This means the finder, preview, keynote and mail applications. Our placed PDFs in keynote slides don't show type. In finder windows, the type in pdfs (the icon) is sporadic at best, in mail and entourage the type on pdfs in email is also sporadic. Preview itself is completely hot or miss. But open the same pdf in acrobat and viola, perfect.
Clearing the font caches and restarting is only a temporary fix.
This is an inexcusable bug that makes doing professional design work (the sole reason we have macs) extremely difficult. I wish we had not upgraded any of our computers.

Emails wont display properly

Similar Messages

Maybe you are looking for