Embed fonts using the Edit Document Text tool

This question was posted in response to the following article: http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7c75.w.h tml

Thanks Steve. I guess it shouldn't be a problem then. Both of the documents would have been created by aperture and therefore be of the same resolution to start with.
One more question if I might: I'm test-driving Acrobat Pro (don't know much about it yet). I've been using Acrobat standard for simple things like adding/replacing pages. Would Acrobat standard save at the same quality of the original document or is there some loss of quality there versus using Acrobat Pro?
Thanks again,
Michael

Similar Messages

What controls the color of the cursor that selects text when you use the "Edit Document Text" tool?

Hi, I have had a student ask me a question I cannot answer: what controls the color of the cursor that selects text when you use the "Edit Document Text" tool?
I have only seen it appear as a black semicircle over each letter, but at a different computer in our training facility, this same tool appears as an aqua-green highlight.
Is it a preference I never noticed? Thanks for any info.

What version of Acrobat? What operating system?

Acrobat X Pro Ctrl E option for Edit Document Text tool

Hi,
When I use the "Edit Document Text" tool (formerly TouchUp Text) in Adobe X Pro and press Ctrl E, it's saying "Properties No current selection".
However, pressing Ctrl E on other tools such as Comments, Link etc, the Properties toolbar is showing properly. And when I switch back into using the "Edit Document Text" tool, the Properties toolbar will show as grayed out.
I tried using Adobe Acrobat 9 Pro and it's doing the same thing.
Is the Ctrl E Properties toolbar is not really available for "Edit Document Text" tool? Do I really have to right click on the area and choose Properties?

Hi gracet41265898,
Please refer the page associated with this Link (Unable to access Acrobat's Tool properties toolbar (greyed out, or "no current selection") ).
Please let me know if this resolves your issue or in case your problem persists.
Regards,
Rahul

Adobe Acrobat X Version 10.1.0 Edit Document Text tool not working

Hi Adobe People
I am suing Adobe Acrobat X Version 10.1.0. I have a document open and I would like to delete a sentence.
So I click on tools and navigate to Edit Document Text.
I highlight the sentence I would like to delete. I press delete and nothing happens. I go to the tool bar at the top and click on edit and the only option it will give me is to copy.
What am I not getting here. I have no idea what is the problem and I am unsure how to solve it.
FYI I want to edit the content in the PDF because I do not have the original source file.
Thanks

I'm stumped.
I found the original source file. It is a word file. I edited one page in word.
Then I opened the original file and I clicked on Tools, navigated to Pages and clicked on Insert from File.
I got the following message
"This document restricts some Acrobat features to allow for extended features in Adobe Reader. To create a copy of the document that is not restricted (and has no extended features in Adobe Reader), Click Save a Copy.
So I do just that.
I try to do the same thing with a saved copy of the document and now it won't give me the option to Insert from File.
I neet to insert a page becuse this is a long document with many text boxes. It was originally created in word. Then converted to a PDF. I do not want to recreate all of these text boxes.
Ugh...
Anyone?....

Help! can adobe acrobat X pro. Cannot edit a pdf. watched videos, followed directions, nothing. Tried tools, edit document text, recognize text, then tried even to change font, nothing.

help! I have adobe acrobat X pro. Cannot edit a pdf. watched videos, followed directions, nothing. Tried tools, edit document text, recognize text, then tried even to change font, nothing.

This is the Reader forum. The Acrobat one is here: Acrobat

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

Note that iWork for iCloud is only designed for PCs and Macs > http://support.apple.com/kb/HT5779
To access to your iWork documents on the iPhone, install Keynote, Numbers or Pages from the App Store

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

How come I cannot use the Editing tools when i am using Adobe Acrobat Reader DC It wants me to Buy Now. But when I use Adobe Acrobat Pro DC i have no problem using the Editing tool yet I had Adoboe Acrobat XI Pro then it was upgraded to this DC stuff

I am already paying a subscription for Adobe Acrobat XI Pro Now it want me to buy when using the edit tool or even the tool to insert pages Never had that problem before??????????????

Acrobat Reader can't edit PDF files. Use Adobe Acrobat Pro DC.

Turn off Snaps in Motion 5 when using the Edit Points tool and Beziers

I drew a bunch of Bezier lines and am now going through my animation and fine tuning thier locations using the "Edit Points" tool. Is there a way to turn off the snapping function within the edit points tool?
Matt

With snapping on and dragging around points or control points in Edit points, you can temporarily disable the snapping action by holding down the command key.

I have a copy of adobe acrobat x pro but i can't use the edit tool. y?

i have a copy of adobe acrobat x pro but i can't use the edit tool. y?

Hi Esther Wong,
What challenges are you facing while using edit tool?
Regards,
Rahul

Preview's "Import from Scanner" documents -Text Tool cannot be activated.

Any documents created within 10.6 and printed/saved as a pdf file can be opened in Preview and the Text Tool activated allowing selection of text and copy/paste or text highlight actions made.
Using OSX 10.6.7 Preview application using the File > Import from Scanner (Epson V500 scanner), the scanned document cannot activate the Text Tool. Only the Move and Select tools cans be selected, activated and used. It's as if Preview's document scanned image using Format-PDF, the scans appear to be an image scan of the text/document into a PDF file and not using OCR to allow a Text Edit.
I can scan a printed document using Acrobat and my Epson scanner and the text tool within Acrobat or Adobe Reader works fine.
Is this a shortcoming within Preview using Format-PDF that the Text tool cannot be activated or used on Preview scanned documents containing text? If so why is Preview's text tool even offered?
If Text Tool can be used on a Preview scanned document…How ? Please!

After further research I have been able to answer my own question regarding-
"Preview's "Import from Scanner" documents -Text Tool cannot be activated."
In Apples Mac 101 Support article entitled: "Using a scanner (Mac 10.6) last modified on March 15, 2011, states: "Item 6. Click Scan to scan. Note: The scanned items will become JPEG images with 300 dpi"
So there it is…Any item (or printed document) scanned under Preview using the selected Format-PDF will be scanned as a JPEG image.
That' s why the Text Tool cannot be activated, it's not being scanned as text but as an image.
If a document is created within the computer via Pages, Text Edit, Word etc. and saved using the "Print-PDF-Save asPDF" file option, the already digitized text is saved within the PDF file and can then the PDF file can be opened in Preview and the Text Tool will be available for use to copy/paste or highlight.
Charlie...76 years old and still Mac'ing

Editing document text in Acrobat 10.1.9 - Black boxes!

Someting when i "Edit Document Text" in a PDF in 10.1.9 black boxes will appear all over the document. Sometimes they show up and sometimes they don't. Any idea what would be causing the black boxes and how to shut it off?
Thanks!

Hi kasey102,
Possibly the fonts used in the pdf do not exist on your system.
Is the behaviour true for any pdfs?
Regards,
Rave

Cannot edit document text

I selected Edit Document Text under Tools | Content | Edit Text & Objects. I place my cursor on the pdf and nothing happens. I then thought that the problem might be that Acrobat does not recognize the text. So I enabled OCR. I then placed my cursor before the text I wanted to change, typed, and nothing happened. The cursor did move to the right, but no new text appeared and the underlying text remained unchanged.
How can I edit the text?

To see changes, you have to have OCR'd with Clearscan. If you used either of the Searchable Text options, then you would only change the hidden text (I have not tried that) and the picture of the original would remain unchanged.

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How do I change font in the whole document at the same time?

How do I change font in the whole document at the same time?

Menu > View > Show Styles Drawer
Menu > Help > Pages User Guide
Download and read page 27 on creating and using Styles, which is done largely by example ie you make the text what you want then save it as a Style to be applied wherever you want in the document from the Styles Drawer.
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=180&mforum=iworktips ntrick
Peter

Embed fonts using the Edit Document Text tool

Similar Messages

Maybe you are looking for