Embed Lightroom Slideshow in Activerain Blog

I've been trying (in vain) to embed a Lightroom slideshow into my activerain blog here:
http://activerain.com/blogsview/658980/Homes-Near-Peterson-and
The slideshow should be in that big blank white space near the bottom of the post. I'm hosting the slideshow files on another site (where I've uploaded the crossdomain.xml file on the main root allowing flash access as well as ftping the files directly from Lightroom using the "Upload" function.) I can't for the life of me figure out the code I should be using to embed the slideshow into the blog. Iframes are callowed...and other blogs use slideshows as well (from slide.com, picasa, etc.)
Any help here is greatly appreciated. Thanks for taking the time to help me out!!
Jamie

Sorry for the bump. Anyone with ideas? please??

Similar Messages

Lightroom Slideshow into Dreamweaver?

How do you embed a slideshow made in Lightroom and put into a page in Dreamweaver?

What is your web development experience?
Which slideshow are you planning to use?
We can serve you best if you start by setting up some web hosting for yourself.
With that in place, you can put your project files on your server and post a link to your pages as they develop.

Is there a way to create a pan and zoom effect in a lightroom slideshow?

Is there a way to create a pan and zoom effect in a lightroom slideshow?

Nope. Be a great feature. For that I use FotoMagico after exporting JPEG's from LR.

Lightroom Slideshow: output AVCHD files (Panasonic, Sony)?

Slideshow seems to have only two output formats: MP4 and .pdf. Panasonic flatscreens, for one, will not play these formats. They require AVCHD files. How can I get from Lightroom Slideshow to this format?

Thanks for your reply. What I meant was the workflow I have delveloped with the client to provide a quicktime file for their use on their end is what has been proven.
The whole reason I started this thread was hoping someone had a NEW WORKFLOW that would allow me to do this.
I have hundreds of clips I have produced for this client that utilze the Animation codec at 100% at a small fraction of the size. In fact I have one clip that is 46 minutes in duration 1920 X 1080 60 FPS using QT Animation codec at 100% and the file is 40 GB. The difference being the source files which were shot with a different camera in DVCPRO HD format.
So if what you're saying is I should expect an 8 minute clip to be 80 GB I'm a bit lost.
Anyway thanks for your reply hopefully someone has some helpful advise. I'm not here to argue with anyone or to be proven wrong, I'm just looking for help.
I'll continue to seach for other options. Thanks to all who have responded.

Lightroom Slideshow - long delay to generate all previews

Lightroom Slideshow - Is there a way for the slideshow to start after the first preview has been generated? Why do all the previews have to be delayed before the first is even shown?

Adobe had problems with overlapped slideshow (showing slideshow while previews generating) and decided to "punt" (generate all previews prior to starting the slideshow).
A step backwards to be sure.
But note: slideshow is using ordinary library previews, so if you are diligent to build after editing, then slideshows start faster.
Sorry, but it's not my fault .
Rob

Lightroom Slideshows and iTunes Music on Mac?

How do I use an iTunes Playlist on my Mac as audio for a Lightroom Slideshow? I have the latest Lightroom and iTunes versions.
Kevin

http://discussions.apple.com/thread.jspa?messageID=5350300&#5350300
See the above discussion. I believe (but to be honest, I am no expert. I am trying to figure out a different, but related question) that you can reformat your iPod to the FAT32 system on your PC, then go back to your Mac, use it as a hard drive, and transfer your songs to your PC that way. Once in the FAT32 format both PCs and Macs will read the iPod disk.

Lightroom Slideshow - Show Filenames

I may just be missing it, but being new to Lightroom, I'm getting my first presentation ready and want to use the Lightroom Slideshow feature. I can't find how to allow the filenames to show with each slide.
I need this as a means of identification for the client.
What am I missing????
Thanks,
Jim.....

Ensure that you have the Tool bar activated in the Sideshow module. (Tap the T key.)
On the Tool bar you should see an ABC icon that will allow text to be added to the slide. Click it to reveal a text box, then click the Title drop menu. In the drop list click Edit. A dialog box will allow choosing a filename.
The resulting text can be repositioned anywhere in the slide area.

Lightroom Slideshow behave strangely when changing star rating.

Hi there,
I am having issues with Lightroom Slideshow when in Manual Mode and filter is on.
When I try and do a manual slideshow and I have filters on "Rating" = ** and I try and change an image to a "*" or a "***" then the slildeshow starts acting weird i.e. it will start showing images randomly on its own. I have to cancel the slideshow and restart. This is easy to reproduce.
Any ideas?
Thanks

You can use star ratings whether the dots are there or not. Try keys 0-5.
Anyway, the View/Grid view style/Show extras menu item will re-instate the star field on your thumbnails.
Hal

Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.

Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.

Jeannine,
If you follow the advice of the previous poster Julie Kmoch and then gradualy add presets back in one at a time you might be able to find the one that is causing the issue. I may be guessing, but I believe the issue has something to do with either an incompatible Preset setting (eg a older preset in newer version of LR) or a corrupt Preset.
Say you bought LR2 and imported a bunch of Presets from the internet, cuz 'Hey these effects are cool and I don't have to recreate the wheel', and then you upgraded to LR3 (not a clean install) and now one of the Presets that calls a certain slider setting or value that is different in LR3 doesn't work anymore. This might be why it throws the error, but again I am just speculating.
Location of LR Preset folder in Windows Vista/ Windows 7
C:/Users/<YourUserName>/AppData/Roaming/Adobe/Lightroom/Develop Presets
If you do not see the folder AppData, you may need to change the settings in Windows Explorer to 'Show Hidden Files and Folders'. To do that in Windows Vista/ Windows 7, open a Windows Explorer window, Click on Organize, then Foler and Search Options. Then click on the View tab and select the option button next to Show hidden files, folders and drives.
Hope this helps a bit,
Glenn

I have no sound on a Lightroom slideshow.

I have no sound on a Lightroom slideshow. Sometimes it works then the next time it doesn't. Even using the same track. I am using MP3 files. whats going on?

I'm having a similar issue. Using Lightroom ver. 5.7 In the slideshow module with the audio option checked, it allows me to select a mp3 file for background music - then says the file is an unsupported format. Result: no sound in preview or playback.
So is there a fix or what?

Save muisc in Lightroom slideshow

I just did my 1st slide show in lightroom 1.3 Windows version. It saved just fine and played nice. Is there anyway to save the music to the slide show once saved in pdf form? Is there any other way to save the music in the slide show by other means. If not will adobe look at this change. This is one of the best slide show programs that very professional in all other aspects. Thank you. Harland

Only one audio file can be used in a Lightroom slideshow.
You'll have to combine multiple songs into a single audio file (e.g. using Audition) then use the single audio file in the Lightroom slideshow.
For more flexibility, you can use commercial software such as ProShow Web, Gold or Producer which comes with a free Lightroom plugin
ProShow Gold - Create Fast and Fun Photo Slideshows
ProShow Web - Instant Photo and Video Slideshows from your Mac or PC
Plug-ins for ProShow

Embed Lightroom gallery in web page

Hello all,
Here for help with embedding a Lightroom created gallery into
a web page in Dreamweaver. My test page is at
http://www.grayareaphotography.com/Copy%20of%20Home%20Page.htm
(dont mind the mess this is just a testing page) scroll to the
bottom and you'll see the LR gallery embedded. At the top are links
to all my other LR galleries, they open in separate pages (perhaps
the way LR would perfer it to be done).
On to the question. I found discussion on how to do this at
http://www.bluefire.tv/blog/flashgalleries/using_flashvars.html
using flashvars, and I have been able to get the shell of the LR
gallery to load, but I can find the code, or mistake or oversight,
that will load the actual pictures. I've emailed BlueFire, no reply
yet. So thought I would ask here too.
All my LR galleries, their folders and files reside under my
root, grayareaphotography/galleryName.xxx.
Here is my code for embedding LR galleries thus far. Anyone
done this? anyone know or see something I am missing?
<object id="FlashID"
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="700"
height="550"codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab">
<param name="movie"
value="RibbonCutting_GovCenter_111108/resources/gallery.swf"/>
<param name="flashvars"
value="livePreview=false
&baseRefUrl=RibbonCutting_GovCenter_111108/resources/
&groupxml=mediaGroupData/group.xml
&stylexml=styles/style.xml
&localText=localization/localText.xml"/>
<param name="id" value="gallery"/>
<param name="quality" value="high"/>
<param name="align" value="middle"/>
<param name="name" value="gallery"/>
<param name="bgcolor" value="#000000"/>
<param name="allowScriptAccess" value="sameDomain"/>
<param name="menu" value="true"/>
<embed
src="RibbonCutting_GovCenter_111108/resources/gallery.swf"
width="700" height="550" align="middle"
type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
flashvars="livePreview=false
&baseRefUrl=RibbonCutting_GovCenter_111108/resources/
&groupxml=mediaGroupData/group.xml
&stylexml=styles/style.xml
&localText=localization/localText.xml" quality="high"
allowScriptAccess="sameDomain">
</embed>
<param name="swfversion" value="8.0.35.0" />

<param name="expressinstall"
value="../Scripts/expressInstall.swf" />
<param name="LOOP" value="false" />
<param name="wmode" value="opaque" />


<object type="application/x-shockwave-flash"
data="RibbonCutting_GovCenter_111108/resources/gallery.swf"
width="700" height="550">

<param name="quality" value="high" />
<param name="swfversion" value="8.0.35.0" />
<param name="expressinstall"
value="../Scripts/expressInstall.swf" />
<param name="LOOP" value="false" />
<param name="wmode" value="opaque" />

<div>
<h4>Content on this page requires a newer version of
Adobe Flash Player.</h4>
<p><a href="
http://www.adobe.com/go/getflashplayer"><img
src="
http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif"
alt="Get Adobe Flash player" width="112" height="33"
/></a></p>
</div>

</object>

</object>

Sorry for the bump. Anyone with ideas? please??

Embed Flash slideshow -- which of these ways is best?

Hi,
I am using SlideShowPro with Lightroom to make Flash slideshows. The SlideShowPro documentation suggests two different ways to embed the show into HTML pages (see below). I am too much of a novice at this to understand the difference between the two methods.
I am curious whether those of you here who do understand the difference can comment on whether one method provides any advantages or disadvantages over the other or whether they both accomplish the same thing equally well.
Many thanks!
John
METHOD 1:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="770" height="566" hspace="0" vspace="0" align="top" id="FlashID">
        <param name="movie" value="../flash/home/loader.swf" />
        <param name="quality" value="high" />
        <param name="wmode" value="opaque" />
        <param name="swfversion" value="9.0.45.0" />
        
        <param name="expressinstall" value="../../Scripts/expressInstall.swf" />
        <param name="base" value="." />
        <param name="allowFullScreen" value="true" />
        <param name="BGCOLOR" value="#c4c0b4" />
        <param name="SCALE" value="noborder" />
        
        
        <object data="../flash/home/loader.swf" type="application/x-shockwave-flash" width="770" height="566" hspace="0" vspace="0" align="top">
          
          <param name="quality" value="high" />
          <param name="wmode" value="opaque" />
          <param name="swfversion" value="9.0.45.0" />
          <param name="expressinstall" value="../../Scripts/expressInstall.swf" />
          <param name="base" value="." />
          <param name="allowFullScreen" value="true" />
          <param name="BGCOLOR" value="#c4c0b4" />
          <param name="SCALE" value="noborder" />
          
          <div>
            <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
            <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
          </div>
          
        </object>
        
      </object>
METHOD 2:
<script type="text/javascript" src="http://johnblaustein.com/portfolio/flash/home/js/swfobject.js"></script> language="javascript">
var flashvars = {
paramXMLPath: "param.xml",
initialURL: escape(document.location)
var params = {
    base: ".",
bgcolor: "#c4c0b4",
allowfullscreen: "true"
var attributes = {}
swfobject.embedSWF("http://johnblaustein.com/portfolio/flash/home/loader.swf", "flashcontent", "770", "566", "9.0.0", "expressInstall.swf", flashvars, params, attributes);
</script>
<script
<div id="flashcontent">
   
</div> </td>

Hi Hans,
Sorry.... I should have done that in my original post.
Test pages using both methods:
METHOD 1:
http://www.johnblaustein.com/portfolio/pages_not_used/home_embed_test.html
METHOD 2:
http://www.johnblaustein.com/portfolio/pages_not_used/home_embed_test_bob_method.html
It may be that both are equally good, but since they are different and I don't understand the differences, I thought I'd ask.
John

Lightroom slideshow goes black

When I try to run Slideshow in Lightroom, the screen goes black and no images are shown. This happens no matter what type of files I am trying to show, i.e. RAW, TIFF, JPEG.

How many images for the slideshow. How long before selecting slideshow and hitting play is? G4 is real slow for LR, and it takes time for the Slideshow to render. Have you first rendered standard previews?
Also, just to be sure, check your monitor profile.
Don
Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.1 & Win XP, Pentax *ist D
See LR Links list at my
Blog for related sites.

How to embed finished project into a blog???

Please help! How can I take my finished quiz and embed it onto my blog?
ALSO,
How can I incorporate html into my quiz? I have a photobucket slideshow I'd like to include in my quiz.
THANKS!!!!!!!

Hi there
Please don't cross-post the same question to more than one forum category.
For anyone choosing to reply to this question, please reply where it was first asked.
You may do this by clicking here.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Embed Lightroom Slideshow in Activerain Blog

Similar Messages

Maybe you are looking for