Embed the specific barcode font directly into the PDF document

Anybody has any info about it ?
embed the specific barcode font directly into the PDF document
Oracle9i Reports Technical FAQ JUL-02 indicated that:
"Oracle9i Reports also provides the functionality of PDF font embedding to
allow you to embed the specific barcode font directly into the PDF document so
the client does not have to have the barcode-font installed in order to view
the document correctly."

See to following posting:
Re: Passing complex XML to session EJB with automatic WSIF mapping
Regards
Sripathy

Similar Messages

  • Why do I keep getting the message that iTunes is quitting working?  I have reinstalled iTunes and I have checked the WiFi twice.  I have even put the internet cable directly into the laptop and still I cannot connect to the iTunes.  Offers no solutions.

    Why do I keep getting the message that iTunes is quitting working?  I have reinstalled iTunes and I have checked the wifi twice.  I have even put the internet access cable directly into the laptop.  The message says that windows will look for a solution but never offers any solution.

    Try disconnect your internet, then launch iTunes.
    Connect your device, then reconnect your internet.
    See if this resolves the issue.

  • TS3367 facetime microphone not working. i can hear the recieiver but they can't hear me. can hear if i talk directly into the microphone by turning the ipad round to the back, then the receiver can't see me!!!!!!

    the microphone on my ipad does not work for facetime. The person I am facetiming can see, but not hear me. if I go to the back of the ipad and speak directly into the microphone, they can hear, but obviously not see , as I'm at the back. HELP ! I CAN SEE AND HEAR THEM.

    I saw one post where a user said dust got in the small mic hole. Used a vacuum cleaner to remove and audio restored. Try it.
     Cheers, Tom

  • How do I limit access of a computer that is plugged directly into the router?

    I have an AirPort Extreme, Version 7.6.1  I need to limit access of a computer that's plugged by usb directly into the router.  I have the MAC address for this computer and have had restrictions on it the in the past, but it was connected by WiFi then.  How do I do this?  Do I limit access to the Ethernet ID?  I don't want to lock myself out trying to figure it out; I did that last night.  Can someone advise please.

    You could use OpenDNS's parental controls:
    http://www.opendns.com/home-solutions/parental-controls
    It can restrict access according to your specifications for everyone on your network.
    It's free.

  • Do I have to plug my ipad mini directly into the mains for a reliable charge?

    I've been having an issue with my new ipad mini not charging even when its plugged in using the mains adapter unless I plug it directly into the wall. This is a bit inconvienient as I don't have enough sockets and I like to use my ipad as a clock radio with TuneIn so when I wake up my battery is about 40% even though its been plugged in overnight.

    This is unclear and confusing...
    Lorraine Broadhurst wrote:
    I've been having an issue with my new ipad mini not charging even when its plugged in using the mains adapter unless I plug it directly into the wall. ...
    iPad Charging
    "The fastest way to charge your iPad is with the included USB Power Adapter.
    iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter.
    When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
    Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain."

  • HT1586 Can the Apple TV 3rd generation be played through a Danon receiver or is the only option to plug directly into the tv?

    Can the Apple TV 3rd generation be played through a Danon receiver or is the only option to plug directly into the tv?

    AppleTV has no analogue connections.
    It has HDMI which can go to your TV or in theory to an AV receiver equipped with HDMI inputs.
    Some HDMI amps/receivers and HDMI switches can cause glitches with AppleTV but it really depends on the particular device.
    AppleTV also has optical out, so if you only wanted a connection for Dolby Digital or stereo feeds from the AppleTV you could connect AppleTV to teh TV via HDMI and also run optical to the amp.
    Audio is output over HDMI and optical simultaneously.
    AC

  • Do I need an audio interface between my roland keyboard, garage band/MAC and Alesis 8.0multitrack mixer, or should I go direct into the USB of the Alesis with my keyboard into the mixer?

    Do I need an audio interface between my roland keyboard and alesis 8.0 multitrack mixer when interfacing with Garage Band? Or can I just go direct USB MAC into the Alesis Mixer with keyboard directly into the Mixer? ie, is the interface overkill?

    First of all the Alesis 8.0 is a usb audio interface so you already have a interface. Next you could go from the Roland into the Alesis into the Mac. You could also go from the Roland headphone or line out into the Mac Pro audio input. And depending on what Roland keyboard you have, you may be able to use Midi (usb) and use the Macs Midi voices.

  • [ID CS6] Having the project build directly into the Plug-ins folder - Xcode

    Hello everyone
    I'm just starting to develop plugins for InDesign CS6 on Mac OS X. After building the project, I currently move manually the plugin into the Plug-ins folder. It is said in the documentation that for having them directly into the Plugins folder, we need to specify it in the ID_SDK_DIR variable in each Target on Xcode. However, I can't find that variable anywhere and I have no idea what I should do in order to accomplish it.
    Thank you in advance for your help, and I'm sorry if it's a very naive question.
    Regards,
    Dave

    Hello,
    Look for BUILT_PRODUCTS_DIR.
    P.

  • HT2518 Can I drop pictures in predefined folders on PC directly into the iPhoto library, or should I?

    I just purchased this iMac and would like to manually transfer large predefined folders of various things, (pictures, other data) from my PC to my Mac. In the case of pictures, I have them sorted by year, month, and so forth. Can I drop them directly into the iPhoto library and will iPhoto understand any of the folder names or what will it do with them?

    You may indeed drop a folder containing pictures to the left side of iPhoto, and it will keep the original organization, as attached.
    But, if you have them already organized in files within folders, perhaps it is not recommented to put them all there, but you know better what you want to do with them.
    In attache screenshot, folder marked by an arrow was dropped there from another location, and iPhoto created a copy of it.

  • Can i create a WAD directly into the production?

    Hi all,
    Can i create a WAD directly into the production?
    thanks
    Pooja

    Dear Pooja,
    yes you can if you have such authorizations in production system.but its not the good practice to do such testings on live system.because of the lot of loads and burdens will be there on live OLAP server.so instead of creating it in produtcion diredctly create it in dev or Quality and check your data quality and see whether your query needs tuning techniques and all then after making it all.transport the query to production and it will be deliverd to release version to the client to test it.otherwise may be your query creates some performance issues on the production system. so always follow the best practices and which is beneficial to you.
    assign points if it helps...
    Thanks & Regards,
    Ashok

  • Is there a nonwireless headphone that plugs directly into the iPad? Thank you Artie

    Hi, name is Artie, I am not tech savvy, but am an old geezer. My kid is laughing at me for buying an iPad. I think my question is simple- is there a headphone that plugs directly into the iPad? I am interested in something cheap/simple that will allow me to watch shows/movies on the iPad while sitting on the couch with the Missus while she watches her shows on tv. I have a separate keyboard which is Bluetooth, but would prefer simple headphones so I can leave a pair at all the locations I will be using the iPad at, on a regular basis. Thank you Artie

    The iPad has a standard 3.5 mm headphone jack on it.
    Any set of headphones with a 3.5 mm jack will work.
    Thank you Johnathan, but I think I stated that pretty clearly: "you can use any stereo earphones with a 3.5 mm plug."

  • WiFi device that plugs directly into the USB slot on a printer?

    My next door neighbor has a MacBook with Airport installed.  She wants to use the portable around the house and send documents to a printer located in the basement.  She does not need a router to network additional devices, so what is the most reliable, reasonably priced device that plugs directly into the printer's USB port without the use of a cable (e.g. device with receiving antenna)?  Thanks.
    Bob

    Well, Badunit, it's more convenient and takes up less room if it plugs directly into the USB port, plus you save the cost of a cable unless one ships with the unit.  Here are two I found at Amazon:
    http://www.amazon.com/Compact-Wireless-802-11n-Newtork-Adapter/dp/B002VVITG8/ref =sr_1_6?ie=UTF8&qid=1311880281&sr=8-6
    http://www.amazon.com/802-11g-Wireless-Long-Rang-Network-Adapter/dp/B0035H4164/r ef=pd_cp_e_4
    Trouble is, they have too many negative reviews.  Besides, just how well do they work with the Airport Extreme card since most of these reviews are not Mac related, and those that are are negative?
    I'd like a device that is guaranteed to work well with the 2008 MacBook Airport card as the broadcast device.  Perhaps she will have to rely on a separate Linksys router with print server.

  • Can I Transfer Videofilme Files directly from the Camcorder (Sony NEX 20) into the iPad?

    Can I Transfer Videofilme Files directly from the Camcorder (Sony NEX 20) into the iPad?

    Can I Transfer Videofilme Files directly from the Camcorder (Sony NEX 20) into the iPad?

  • HT201401 use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new ve

    I use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new version IOS6.
    had anyone this problems?

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

    I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

    The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
    The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
    Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
    WDS network
    If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
    The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
    At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

Maybe you are looking for

  • IPod Photo no longer recognized by iTunes 10

    I do not know how long ago my iPod Photo stopped being recognized by iTunes. It is certainly an old iPod that I occasionally use to record voice for podcast. Today, I noticed that this iPod Photo no longer shows up in iTunes 10. I connected it to two

  • Problem with preloader not passing over nextFrame();

    The preloader I created doesn't transistion to the next frame, it just hangs on the preloader frame at 0%.  Here is my code: stop(); loaderInfo.addEventListener(ProgressEvent.PROGRESS, updatePreloader); function updatePreloader (evtObj:ProgressEvent)

  • How do I stay on a photo I selected from search results?

    Under Photos (as opposed to Events, Faces, or Places), I do a search, by name, for a photo in iPhoto 11.  I find the photo. Maybe there's more than one with the same name.   I select the photo I want. Now I want to see the other photos surrounding th

  • Private Browsing Saves Sites

    Using Firefox 20.x , configured to always be in private browsing mode. For some reason, after a while of browsing, when I open a new empty tab, there is content saved on the dashboard of recently visited sites. This seems almost exclusively to happen

  • Pen Tool on New Layer Keeps Bouncing to Original Layer

    I'm on a Win 7 machine using Illustrator CC, using a mouse with the pen tool. I created some shapes on one layer, and now want totrace just the outside of those shapes on a different layer. It worked well enough on the first two shapes I did this wit