Embed Video Editor doesnt work =(( N78

Hi everyone, i have N78 and after updating to the latest software version I noticed that I cannot use video editor - I cant add musik to my videos and cant work with pictures as well like to crop, bright up etc. Hwo knows wots is the problem? Is it because of updating?

Hi,
How did you write autoplay attribut ?
Videos on Safari and iOS.
Videos HTML 5 by google.

Similar Messages

Why is the fb video call doesnt work with macbook?

why is the fb video call doesnt work with macbook?

Hi
Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Polymorph.zip ‏14 KB

I have a MacBookPro. When try to do a video call on facebook. The video camra doesnt work. the screen breaks and you can only hear some things. I update adobe flash so it has the latest verion. do u know wat going on ?

i have a mac pro. when i try to connet to a vedio call. the call doesnt connet. the person on the other side can see me but i cant see them. i updated the new version for adobe flash. but the camra stiil doesnt work.

You might want to see if the following article helps you:
http://osxdaily.com/2011/07/06/facebook-video-chat-mac-os-x-lion/
Hope this helps

Dynamic Video Straming Doesnt Work in iPad

I am trying to create video dynamic streaming for iDevices,i tried this simple code under RTMP and HTTP protocol for recorded video. it works in Flash Builder 4.6 simulator but in iPad it does not work:
<s:VideoDisplay
        width="500" height="300">
        <s:source>
            <s:DynamicStreamingVideoSource
                host="rtmp://serverID/vod/">
                <s:DynamicStreamingVideoItem
                    streamName="MP4:sample1_150.f4v"
                    bitrate="150" />
                <s:DynamicStreamingVideoItem
                    streamName="MP4:sample2_500.f4v"
                    bitrate="500" />
                <s:DynamicStreamingVideoItem
                    streamName="sample3_1000.f4v"
                    bitrate="1000" />
            </s:DynamicStreamingVideoSource>
        </s:source>
    </s:VideoDisplay >
also i simplify that code as below:
<s:VideoDisplay source="rtmp://localhost/vod/MP4:sample1_500kbps.f4v"/>
and the result as the same,How can i fix it? thanks

Hi,
Can you please cross check the following :
1. The rtmp URL is edited accordingly to point to the correct FMS server instead of localhost etc.
2. The above code snippet should be bundled as an AIR app and published for iOS.
If you are using HTTP instead of RTMP, you need to follow HLS streaming for iOS which makes use of the HTML5 video tags instead of any flash/AIR based applications. Please let us know if you are looking for this.
Thank you !

Ipad2 video player doesnt work, already tried restarting and resetting

When I go to my standard video app in my ipad, it comes out black and nothing happens. I have already restarted and reset. Software up to date. I cannot plug into my computer right now.

See if the video app will start this way.
Go to your first home screen and swipe to the right to bring up the search feature. Type in the name of one of your movies or TV shows. When it appears in the search - tap on it - and it should start playing. Let it play for a minute or two and then hit Done. Now go the videos app and see if it works.
If you need a video to try this with - download a free video podcast and use that for the "test" movie.

Blackmagic Intensity Pro - Video playback doesnt work

Hi there, I am experiencing some weird issues with Premiere CC and the Blackmagic Intensity Pro card.
I mainly use the card to playback my edit to an HD monitor. This has worked quite well, but as of today it stopped working.
Last time it stopped working I opened a different project (one I knew the card have worked before) to check and it was working. I did nothing and opened the project the card wasnt working and to my surprise it just worked.
Today I am having a problem as I cant make any of the projects work w the card.
It feels it works at random. I would appreciate any help on this.
Working on a Mac Pro Quad Core INtel 3.2GHz
Sequence is Blackmagic Uncompressed 23.97fps
Preferences>Playback - set to Blackmagic
Problem started when I was flipping between headphones and external speaker (to cut my audio). I do not however send audio through the BM card. Always Line out or Headphones.
Thanks in advance for any info.
Pedro

hi,
ihave bought it and am using it with my quadcore g5 2.5 ..
for now i switched back to canopus because its much more stable and not
"touchy" when i jump around in the timeline...
but this may have a lot of other reasons ..
with finalcut its very nice ans stable, i think the drivers have been written
to be compatible with fcp rather than logic.
I wantd to have the picture for an HD Movie in Llogic but now i prfe to have
stability,
bets regards,
andy

Video Recorder doesnt work

Hello guys i bought my iphone 4 today and everything works on it including the camera but when i switch to record mode the shutter animation plays and opens and its juat a black screen :S any idea whats going on?
Proto

Hello guys i bought my iphone 4 today and everything works on it including the camera but when i switch to record mode the shutter animation plays and opens and its juat a black screen :S any idea whats going on?
Proto

Video file doesnt work

Why my new P6-1499 HP PC can not video play ? ie, Supportvideo

Hi there bob_sun004. Hope you're enjoying your HP P6-1499 desktop. I looked up your issue and found this general help site from the experts at HP. Give it a try and let us know how it goes: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bph04760&lang=en&cc=us&taskId...
Although I am an HP employee, I am speaking for myself and not for HP.

Android to desktop pc video call doesnt work

and I am trying to with a loved one in Penn who has a desktop compute. We have tried video calls but only have a blank black screen and have no audio. I can see myself in a smaller window but thats it

You might want to see if the following article helps you:
http://osxdaily.com/2011/07/06/facebook-video-chat-mac-os-x-lion/
Hope this helps

Audigy 2 ZS Video Editor Work Temperat

Hey all
I bought the Audigy 2 ZS Video Editor, it works perfect, but I hard to seen, she work in high temperature like a harddri've, it's normal?
Thz all.

Somebody know?

Why video call not working on Facebook?

why my video call doesnt work

I need help ...everitime i try to do video call..and its writen video failed..why??

Audigy 2 ZS Video Editor and Vista

Hi
How to have my Audigy 2 ZS Video Editor Fully works with vista
including EAX Console/surround mixe/Speaker parameters/graphic equalise/THX console ?
i juste upgraded to vista and with the driver available for download (USB_VTDRV_LB__0_0002) it's really useless ...

Hi
How to have my Audigy 2 ZS Video Editor Fully works with vista
including EAX Console/surround mixe/Speaker parameters/graphic equalise/THX console ?
i juste upgraded to vista and with the driver available for download (USB_VTDRV_LB__0_0002) it's really useless ...

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

It would "run" (more like Sunday stroll or walk) if you installed Snow Leopard in a VM. Especially if you have 6-core (and would help to have 6 or 8 cores anyway if you were able to and intend to make best use of nMP for video editing).
If you "classic" Mac Pro was 2009 or later, adding two AMD graphic cards, upgrading the processor to 8-core 3.xGHz would have gotten you a FCP-X capable machine and still dual boot and use Snow Leopard as needed.
Any Mac Pro can now use 1000MB/sec SSD PCIe blade to boot from and/or for scratch and editing to help improve work flow.
SSD Blade Drive for "Classic" Mac Pro

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Sounds like you need to contact skype.

Steadyshot stabilization for video doesnt work since Lollipop update. HELP!

Where should I send information about SERIOUS issue of new Lollipop on XPERIA Z3? Since last update from Kitkat the SteadyShot stabilization for video doesnt work (intelligent mode works standard). Previously great videos are now shaky and simply ugly. Please SONY make something with that on next update. Probably Ill have to sell my Z3 if there will be no patch. Im filmaker who needs good video quality in his smartphone.

i tried both...still inteligent works as standar what means stabilization is very poor...here more info about that lollipop bug found on the net http://forum.xda-developers.com/z3-compact/help/steadyshot-intelligent-active-gone-t3106177

Embed Video Editor doesnt work =(( N78

Similar Messages

Maybe you are looking for