Embedded audio doesn't play from server.

It plays fine in Preview but does not play from the server. I am using Dreamweaver CC and have used the suggested three sources, mp3, wav, and ogg. I am very new at HTML and Dreamweaver CC so was looking for the most basic way to approach this. I don't want to be too much of a burden so if I could learn to have my song play in one OS (iOS) and one browser (Safari) that would be good enough for me. Thanks very much.
BC

What John said. I can't find any of these files on your server.
<source src="music/Música Gurdjieff- De Hartmann.mp3" type="audio/mp3">
<source src="music/Música Gurdjieff- De Hartmann.wav" type="audio/wav">
<source src="music/Música Gurdjieff- De Hartmann.ogg" type="audio/ogg">
Also, don't use spaces or special characters in file or folder names. White space in your file names causes validation errors in HTML5 doc types. You may safely use dots . hyphens - or underscores _ but not spaces.
Nancy O.

Similar Messages

Embedded audio doesn't play on iPad or iPhone

I have embedded HTML code in my homepage for audio to play:
<embed src="playit.mp3" autostart="true" loop="false" hidden="true"></embed>
which plays OK on desktops and laptops, but does not play on iPads or iPhones.
Does anyone else experience this with their embedded audio code?
Is this phenomenon a quirk of iPad/iPhone that requires some special coding?
All feedback welcome.

If you're hosting with Business Catalyst, please re-try publishing All Files through Upload options (and not just the modified files), clear mobile browser cache and check again. If that doesn't help, please share the site URL.
A similar thread here for reference that may be helpful - http://forums.adobe.com/message/5265500.
Thanks,
Vinayak

In iMovie, audio doesn't play on movie preview

Hello,
I got iMovie 10.0.6 yesterday. It worked fine for a few minutes, but afterwards, I couldn't hear the audio in my movie. However, if I went into the event the movie it was in, I could hear the audio on preview. I tried exporting, and the audio was working perfectly there too, but not in the movie preview itself.

What version of OS and Keynote?
Audio doesn't play on a single slide when exported into Qtime
Are you trying to play audio over the complete presentation on one slide or a range of slides?

My computer was rebuilt this week and I am in the process of setting up iTunes and have a weird setup issue. The music in my playlists plays but the same song doesn't play from the library. Initially, I opened ITunes while holding down Shift of control.

My computer was rebuilt this week and I am in the process of setting up iTunes and have a weird setup issue. The music in my playlists plays but the same song doesn't play from the library. Initially, I opened ITunes while holding down Shift of control key.

Scratch the post above - the musics that plays in the playlist also plays in the library and that is because i forgot that i imported from the cd yesterday. Basically, I see the rest of my music, but it doesnt' play and tells me it can't locate the file though the location in 'perferences' points to the correct location. Getting iTunes to play after a new computer or rebuild is a headache.

Using Acrobat 8, Embeded audios are not playing in browser.

I have PDFs with embeded audio. But when load PDFs online and open in browser then AUDIO is not playing.

Hi Piyush_Bajpai,
Do you have flash player installed on the machine?
Please use this link to download Flash Player -
http://helpx.adobe.com/acrobat/kb/reader-acrobat-flash-player-download .html#main_download
If the problem still persists, please help us undersrtand the problem by answering the below -
1. Are there any errors when the content does not play ?
2. What audio content type (file extension) are you trying to use ?
3. Do you access PDF files (having audio/video) from an http url ?
4. Could you please provide one such sample file to help me replicate ?

DVD doesn't play from the beginning when inserted a second time into a dvd player

DVD burnt in DVD studio pro, when ejected and inserted again into dvd player, the dvd plays from where it stopped the last tome it was ejected. It doesn't rewind and play from the beginning.
Is the problem in the burning settings in DVD studio pro? any help is really appreciated!

My DVD Player setting was Last option played, I changed it now to "beginning". It now starts from the beginning when I insert it again, thanks.
Another issue is that my First play in the DVD is a Track, then comes a Menu. When I leave to the Menu while the Track didnt finish, and then click the dvdmenu on my remote control, the Track resumes from where I exited to the menu last.
Is that something i can control ? To make that intro track start from the beginning?
Thank you, I appreciate the help!

Audio doesn't play full speed

OK, my frame rate is fine in the timeline display and the video plays correctly BUT the audio plays like I set it to play at 50% and this is all at the same time. when i move the scrubber bar to the middle the audio won't play and it says dropped frames but everything is rendered!!! Please help. This happens to all of my projects even previous ones that haven't been opened in forever. I have a huge project due and I need this fixed. Please help!

Welcome to the forum.
While it may seem like we are clairvoyant (if you read through all the truly amazing problem solving threads), we really can not see your computer or read your mind.
As much as I love 20 questions, you can short cut things by telling us all about your computer system, the media you are working with, your version of FCP, QT, OSX and what you have done to solve this little problem.
Cheers,
x

No audio when video played from internet

when i play videos on news media websites i get no audio.i have audio when i play mp3's and videos that go through itunes.....yes all the audio buttons & levels were checked and up....i think

Hi gbcamguy
You are in the wrong discussion forum, you should post your problem in the relevant OSX Tiger Discussion Forum. This is for OS9.
You will find more help and assistance there

Audio doesn't play

I'm having a problem where clips in the preview window will not play audio, particularly for long clips. Often if I start at the beginning of a clip, I can hear the audio all the way through. When I mark and in and the sounds stops, I can't hear audio from the in point and I have to back up several minutes into the clip to get my audio back. Makes Final Cut basically unusable.

Hi Tom,
The problem seems to come from having audio (imported from a field recorder that rolled before the camera) at the beginning of a synchronized clip that starts before the video. It seems that the audio preview will only work for as long as the length of the actual video (starting from the beginning of the synchronized clip rather than the first frame of video). Since the video (which came from a Canon 5D mk ii, transcoded and proxied) starts later than the audio, scrubbing ceases to function past it's length, even if there is more video and audio. So if the audio recorder rolled for 30 seconds before the camera, the synchronized clip has 30 seconds of sound without video at the beginning and the clip will scrub fine until it hits 30 seconds before the end of the actual video. On the show I'm working on, the audio rolled non-stop during the interviews while the camera had to restart every 12 minutes due to the nature of the camera. I'm testing to se if trimming the audio prior to synchronizing the sound makes a difference. It would be handy if there was a way to trim out the unused audio at the beginning of the synchronized clip after it's already been synchronized, but I haven't figured out a way to do it.

Audio doesn't play right in transitions

So I have 2 clips that i'm trying to put an overlap in between.It inserts fine, but when i play it the audio in the transition is the audio from a clip that's at the beginning of the video. Every transition is like this and I have no clue what to do, suggestions?
Macbook Pro Mac OS X (10.4.9)

"..ANy idea what's causing this?.."
Yes, it's reading the audio from a "cache" ..a bit of memory where it's stored what it played previously. Same as when you preview a transition: it uses its memory cache to give an idea of what the transition will look like between clips. One or more of the clips which it uses in the 'preview' may be different from the clips which you're intending to apply the transition to.
Tides are caused by the proximity of the moon and sun to the earth. It's a glitch. The Supreme Being inadvertently forgot to keep the moon and sun at right angles to each other ..a programming error.
Don't worry; it'll be corrected in the next version of the Universe. (Except that water may be accidentally reformulated as H2O2.)

The embeded swf doesn't play...

Hi
I'm trying to embed a swf that was created with a flash gallery making program into a pdf file but it just never works properly. I've also tried converting it into pdf but that doesn't work either. Once I convert it/embed it all I see is a white/black square. However if I embed other smaller swfs most of them just work fine. Could the problem be that the swf is too large? Can anybody please figure out the problem? I've been trying everything for the past 3 days and I'm awfully desperate Anyone's help would be greatly appreciated!

Acrobat and OS make no difference, but the version of Flash Player that the gallery targets will make a difference - Acrobat and Adobe Reader currently won't play content designed for Flash Player 11.
The other problem can arise when the gallery is using external assets (image files, XML configuration files, etc.) as these must be available after embedding. You should attach them using the Resources tab on the Rich Media Annotation dialog box (right-click your embedded SWF in Acrobat and choose Properties), but if the gallery is written to expect certain folder structures it may not like being sandboxed inside a PDF file.

Audio doesn't play in DVD player

Hello,
First post here, so be gentle.
When I burn a DVD, there is no sound when I play it on my dvd player. It plays fine when played on my Mac.
Here is what is going on:
1. capture HD video in imovie 06.
2. add chapters, no external audio or photos
3. export to idvd
4. check video in idvd, all looks good, includes audio
5. burn dvd
6. when burn is complete, play in DVD player
results:
No sound when playing video.
I am not sure where to go next, I will try another DVD player this evening. When creating a DVD with the exact same setup but not HD content, everything worked fine.
Any Ideas?
Thanks
Bill
Message was edited by: Bill Wilson
Changed Title

If it plays OK in your Mac, iDVD 'has done its thing'.
Not all set top like writable media - this might be your problem.
More likely, your problem involves a high level of burn errors resulting from low quality media and/or a high burn speed. Instead of going directly from iDVD to writable media, create a disk image file (an option under FILE). Use Apple's DVD Player to verify the mounted (by double-clicking on the disk image icon), then use Apple's Disk Utility or Roxio's Toast to burn the disk image to writable media. Use good quality media (Maxell or Verbatim) and burn at a low speed (4x or slower).
F Shippey

Multicam Clip's Audio Doesn't Play In Main Timeline

I have 2 camera angles of the same event. I made a multicam clip of the 2. Both angles have audio in the video clips. When I go into the multicam editor, both clips have audio. When I play the multicam clip in the Event, it has audio.
When I put the multicam clip into the main timeline, there is no audio at all. The audio tab isn't there when the clip is selected.
I need to take 2 different angles, each with their own audio, and make a multicam clip and switch between the two and switch their audio and video.
What's the trick to get this to work?
Thank you!

Thanks, Luis! That was it.
FYI, it didn't update the clip on the timeline, but I just dragged it back out to the timeline from the event and that one had sound.
Thanks for the reply too, Tom!

Audio doesn't play back through DAE audio tracks

I work on Digidesign HD hardware and Logic as a front end and a problem has crept in over the last week or so.
I will be working on a song and suddenly with no warning Logic freezes for about 30sec or so. After this all audio files playing back on DAE tracks will not playback or white noise plays back from those track. The DTDM tracks and instruments tracks work fine. This happens wether i have a couple of tracks on the go or loads. It's like the DAE audio playback side crashes but all other things still play back through the DAE so it half works.
PLEASE PLEASE help as i have to reboot Logic everytime and 10-20 mins later it happens all over again.
Thanx
G5 dual 2Gh Mac OS X (10.4.2)

Just some quick thoughts....I'm not a "techie", but have had my share of softwaretrouble!!
It could be that Logic is set to global 16bit - and you try to play back 24bit files. Had kind of same problem a year ago, but don't remember if it was Logic OR ProTools that gave this result (played for a while...then a burst of white noise). But the crash...no. This is probably caused by other components. It's usually a good thing to trash the Logic preference file and restart. Then check preferences>audio>drivers>DAE that the global bitrate is set as desired (according to your already recorded files). The DAE preferences don't contain that much information, but could be helpful to trash too. Just remember to set the playback buffersize to a reasonable amount for your setup.
Hope this will help.
G5 Dual 1.8 / 3GB RAM Mac OS X (10.4.6) Logic Pro 7.2/ProTools 7.1 HD2 Accel/192 IO

Audio won't play from the start of the slide

Good afternoon all,
I'm new at this and recently created my first instructive
demo. I recorded and have everything synching up fine but the audio
in two of the slides WON'T start the audio from the first words
recorded. The audio begins in the middle of the second or third
word spoken.
This only happens when I play the entire demo or from a
certain point in the demo to the end. If I play the two slide with
the audios indiviually you can hear my every word from start to
finish and if I play the audio ONLY I hear it fine also.
I have tried starting the audio a few seconds after the
screen being demonstrated starts, re-recording the audio, adding
silence in the beginning.........................anyone have any
suggections. I've done everything I know to do but start over from
scratch.........I didn't say that...........LOL!

My suggestion was going to be ensure the audio file starts a
second or
two after the slide starts, but seems you're already doing
that.
So if you've tried all those things and no luck, then I'd
recreate the
slide entirely.
Insert a blank slide, copy the background from the problem
slide to the
blank slide ('paste as background'), then insert the audio
and test it.
If it works as expected, then copy/paste any other screen
elements from
the problem slide, then delete that problem slide.
Helps?
Erik
Neckbone2007 wrote:
> I recorded
> and have everything synching up fine but the audio in
two of the slides WON'T
> start the audio from the first words recorded.
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Embedded audio doesn't play from server.

Similar Messages

Maybe you are looking for