Embedded chart fails to display

When I use the commsec web site a chart should be shown for each stock code entered but the chart is only displayed intermittently.
When I right click on the chart to find it's source it comes from http://www.retailservices.wallst.com so the page appears to be trying to display the chart from another location. The problem is less apparent using Chrome and does not happen at all using IE9. The commsec web page requires a login so unfortunately you will not be able to test it.
Perhaps the page finishes rendering before a response is received from the chart server??
Any advice you can give me would be greatly appreciated

Hi,
I believe that I've found the cause for this and now I would like to know if there is a cure.
If you right click the labels on the left of the chart you get the "Group (X) Axis options..." and on the layout tab there is an option that says "Skip Group Labels" this is set to true (ticked) and the number of labels to skip is set to 1. Unfortunately the option is not enabled. Can anyone tell me under what conditions that this option becomes enabled?
Many thanks.
Noel

Similar Messages

Embedded PDF on web page fails to display

We have a number of PDFs that are shown embedded in IE (versions vary). This worked fine with Adobe Reader 9.5 but with 10, PDF fails to display.
Page takes a while to report error. Error:
There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (103:103)
I found a few other discussion similar to this in the forum but didn't find a definitive root cause.
In our situation, we found that if the user launching the web page runs Adobe Reader as standalone first, the error doesn't happen.
While workaround exists, I am trying to understand the root cause to see if we can correct this for all the users in automated manner instead of
mandating launching of Reader standalone as a prerequite step. Quite a few users using this web app.
Since launching of Reader standalone works, my guess is that some config/setup is done only after first use. I see that, for example,
reg keys are added under HKCU on first use. I don't know why first use from browser differs from first use from standalone though. Difference in
reg access? Enable/Disable browser plug-in produces different behavior so I don't think the setting is on the browser side. What other factors
may be in play here?
All ideas welcome. Thanks in advance.

Got a couple follow up questions. Postiing the response here.
1. Please send us step by step method on how to recreate the problem, and the URL of the PDF file that shows the issue.
* Write a simple console application that does nothing but starting a browser. Browser URL set to any web site with embedded PDF. I believe I used a sample on Adobe's site for last test.
2. Is everyone in your company experiencing the same issue?
* Yes, everyone can be affected.
3. Does the error show up on any PDF or just the embedded PDF?
* Only embedded.
4. Does the problem occur with Firefox?
* Not browser specific.
5. Do you have any other version of Reader or Acrobat installed on the same system?
* No, clean test box. Tested with 10.0.0 first. Failed. Then cleaned up install and installed 10.1.3. Cannot repro with 9.5.
Root cause appears to be Protected Mode. If I disable that, it works.

Flash site fails to display properly in firefox & ie.

Greetings all,
site below fails to display properly. When i visit the link
below using firefox or ie6, i see it fine. but when anyone else
visits it they see it with defects.
defects include product text overlapping the fg&m logo,
ferrioni home designs, inc header is cut off and only part of it
displays, featured products headers is also cut off and only part
of it displays.
http://www.websitemedia.net/playground/ferrioni/sandbox/index.html.
have tried the following.
**made sure latest flash player is installed where customer
fails to see the site display properly.
**made sure latest ie and firefox browsers are installed
where customer fails to see the site display properly.
One important note, we are export flash movie using flash
vesion 6.
Need some insight on how to make sure everyone sees the site
displayed properly.
Thanks in advance
BL

This is just a wild guess but... Be sure that you have
properly embedded any needed fonts for dynamic or input
text.

Windows 7 x64 Pro, desktop GUI fails to display correctly, or crashes, when High RAM load, and even after. HW changed, same issue. Please Help.

Hi Guys,
I have have this horror issue with my PC. I have even changed the hardware configuration and the problem still persists. My PC fails to display the desktop correctly after using highly RAM intensive applications, especially Chrome, but even after getting
the chance to close it, or waiting for it to crash by itself, the PC is still not able to display correctly the GUI, even on other browser/applications as shown in the screenshots.
1st Hardware Config:
Intel Core2Quad Q9450
4x2GB DDR2
MSI P43 motherboard
Ati Radeon x550 video card
Software used, that seemed important for me to mention:
NOD32 v4.2
Comodo Firewall 5.12
Chrome
Screenshot Captor
SpeedFan
Other mentions:
Aero is disabled, because I've considered that it's one of the causes.
So, I've considered that it's a RAM issue or a videocard issue, and I've upgraded to:
Intel Core i7 3770k
4x8GB DDR3
Asus P8Z77V-LX motherboard
Intel GPU integrated in the 3770k CPU
The problem just happened 2 times on this rig also, and the RAM was not even coming close to it's maximum capacity of 31.7GB. It was at ~20GB's.
Also, this is another videocard(Intel's integrated GPU), so we can exclude the videocard from the suspects.
My suspects:
1) some desktop manager bugs, or other similar issue
2) video memory allocation - I'm still suspecting that it can be caused by the amount of RAM dedicated to the videocard, currently, I think that it is at 256MB.
3) some poorly designed components of Chrome/Screenshot Captor - still very questionable since there are enough resources on this system, so there should be no fight over resources. And when the system is barely used there are no issues.
4) Adobe Shockwave Flash - maybe this one????
I have attached a set of 20 screenshots here, these were taken on the 1st configuration of my PC, using Q9450:
http://imgur.com/a/Mc8hI#4
Notice how it distorts the image by duplicating it and showing it in a smaller space, or how does it displays those black rectangles. In those moments, the PC is fully functional(the apps are running the background), without being slowish or something, but
you can hardly control it like that. For example, I've tried to remove the mouse from the USB, and then I've insterted it back, the image was not displayed correctly, but the mouse was recognised instantly and the pointer was controlable.
Same thing still happens on the new configuration. Please advise me.
LE: OS is Windows 7 x64 SP1 Professional and it's Geniune. There is no cracked software on this PC. No games. I've tried to maintain it as clean as possible.

Hi,
First, please be ensured that you have installed the latest drivers and all the updates.
Then check whether this issue will not in
Safe Mode. If it didn’t occurred, I suggest you narrow down the cause in
Clean Boot mode.
In addition, try to create a new profile to see how it works.
Hope this helps.
Vincent Wang
TechNet Community Support

Bug (possibly?): SelectManyShuttle fails to display selected items

Bug (possibly?): SelectManyShuttle fails to display selected items when valuePassThru="true" in ADF 10g
Hello all,
When run, the example below shows a Select Many Shuttle with four choices in the leading list. When items are shuttled to the training list and the page is submitted the trailing list is rendered with no items selected. Is this a bug?
Configuration
This example was constructed using jDeveloper 10.1.3.5.0.
A new application was created using the Web Application [JSF, ADF BC] template although no business components are used.
Steps to Reproduce
1. Create the following backing bean class.
package com.fmcna.adf.test.view;
import java.util.ArrayList;
import java.util.List;
import javax.faces.model.SelectItem;
public class ShuttleBean {
    public ShuttleBean() {
    private List availableItems;
    private List selectedItems;
    public void setAvailableItems(List availableItems) {
        this.availableItems = availableItems;
    public List getAvailableItems() {
        //populate with a List of SelectItem instances on the inital call to this method
        if(this.availableItems==null) {
            this.availableItems=generateSelectItemsList();
        return availableItems;
    public void setSelectedItems(List selectedItems) {
        this.selectedItems = selectedItems;
    public List getSelectedItems() {
        return selectedItems;
     * Build a List of SelectItem instances to be used by an af:selectManyShuttle
     * @return A List containing SelectItems instances
    private List generateSelectItemsList() {
        List initialItems = new ArrayList();
        initialItems.add(new SelectItem(new Integer(11),"First Choice"));
        initialItems.add(new SelectItem(new Integer(22),"Second Choice"));
        initialItems.add(new SelectItem(new Integer(33),"Third Choice"));
        initialItems.add(new SelectItem(new Integer(44),"Fourth Choice"));
        return initialItems;
}2. Configure the ShuttleBean class as a session scoped managed bean as in the following faces-config.xml file.
<?xml version="1.0" encoding="windows-1252"?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config xmlns="http://java.sun.com/JSF/Configuration">
<managed-bean>
    <managed-bean-name>ShuttleBean</managed-bean-name>
    <managed-bean-class>com.fmcna.adf.test.view.ShuttleBean</managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
</managed-bean>
<application>
    <default-render-kit-id>oracle.adf.core</default-render-kit-id>
</application>
</faces-config>3. Create a JSP page containing an af:selectManyShuttle with a nested f:selectItems component. Wire the values for these components to the properties in the managed bean.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces" prefix="af"%>
<f:view>
<html>
    <head>
      <meta http-equiv="Content-Type"
            content="text/html; charset=windows-1252"/>
      <title>testShuttle</title>
    </head>
    <body><h:form>
        <af:selectManyShuttle value="#{ShuttleBean.selectedItems}" valuePassThru="true">
            <f:selectItems value="#{ShuttleBean.availableItems}"/>
        </af:selectManyShuttle>
        <af:commandLink text="Postback"/>
    </h:form></body>
</html>
</f:view>4. Run the JSP. Validate that the trailing list is initially empty.
5. Shuttle one or more items to the trailing list and click the Postback button. Validate that when the page refreshes the trailing list is again empty.
Thanks for any input you might be able to provide.
Chris Mihalcik
Edited by: user5384858 on Jun 14, 2010 1:06 PM

I'm holding my Nano in my hot little hands with ALL of the things you listed, but here's the sad, simple truth: you CAN'T use iTunes to sync everything. It works well for:
1) Music
2) Videos (except sometimes in Vista)
3) Photos (as long as they're not too large)
but is terrible for:
1) calendar
2) contacts
3) To-Do lists
For the latter use something like "iGadget" (www.ipodsoft.com). I also edit/store notes w/iGadget plus it allows you to export files, etc.
I gave up on syncing iTunes w/Outlook long ago. Good luck.

On windows 7 machine, safari fails to display web sites

on windows 7 machine, safari fails to display web sites

what happens is you type in the url and press enter then nothing. the fix was to run "netsh winsock reset"
If the winsock key reset helped things, that usually indicates trouble with a LSP. (That's also consistent with a 'silent" Safari page-load failure.) If you run into the problem again, perhaps try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

Chinese characters failed to display on songs in rip from my own CDs

My old hard disk was dead and I lost some of the songs that I had on my computer. So I tried ripping my own CDs into iTune. Unfortunately, all the Chinese characters failed to display properly. The songs in my old ipod showed those characters nicely and properly so I do not even have guts to sync my old ipod now. Did some research on the net and it said that I can try convert ID3 tags. Sadly, the new iTunes no longer provide this function. Went to apple support site and they need me to buy apple care plan! I have a ipad still in the warranty period but I am extremely disappointed that iTunes, a software, also needs me to pay for support. This has cast me shadow of having my 4th apple product. I am using the latest iTunes version 12.0.1.26. Help on support of local language is truly appreciated.

You wrote "with my last ipod update". Are we talking about syncing your iTunes to the iPod function of your iPhone? Because if not you might be in the wrong forum. If so, then you need to remember that there is no "drag and drop" functionality for transferring your music onto the iPhone. You must first create a playlist within iTunes (I called mine simply iPhone) and then tell the iPhone to sync that playlist to your phone when you connect it to your computer. As you are probably familiar with creating playlists within iTunes you know that you can then drag and drop whatever you'd like into one, including both purchased and imported music.
Hope that helps.

Chart doesn't display in Tabbed application

I am beand new to Flex Builder and am running into a problem that I just can't seem to figure out. I created a view-based application following the process outlined by Michael Chaize in his Flex 4 Dashboard video (with the exception that I am retrieving data from a Microsoft Web API REST Service rather than PHP). With some minor changes (to get data into the Array Collection), it works perfectly and my chart displays in the emulator (iPad). Great. Flex is cool.
Next I decided to experiment with a tabbed application. I added a view with the exact same code and the chart deosn't display. I debugged the application and all of the variables have the same data as in the basic dashboard I successfully created. The service is being called. The array is being populated. and the data source has the data, but no chart displays.
What am I missing? Do I have to do something differently when creating a tabbed application? Note: I put a Text Area and Text box on the view and am able to populate the text area with the xml from the service as well as specific items from the array.
Thanks in advance for any help you can provide. I am quickly becoming a Flex fan (vs. Silverlight), but I am really confused by this issue!
Thanks,
Don

Here is my code:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
creationComplete="application1_creationCompleteHandler(event)"
title="Demographics" xmlns:demographic="services.demographic.*" xmlns:demographicservice="services.demographicservice.*">
<fx:Script>
<![CDATA[
   import mx.collections.ArrayCollection;
   import mx.events.FlexEvent;
   import mx.rpc.events.ResultEvent;
   import mx.rpc.xml.SimpleXMLDecoder;
   import mx.utils.ArrayUtil;
   [Bindable]
   private var demographicBreakdown:ArrayCollection = new ArrayCollection;
   protected function application1_creationCompleteHandler(event:FlexEvent):void
    // TODO Auto-generated method stub
    ResponderDemographicBreakdown.token = demographicService.GetDemographic(1);
   protected function ResponderDemographicBreakdown_resultHandler(event:ResultEvent):void
    var xml:XMLDocument = new XMLDocument(event.message.body.toString());
    var decoder:SimpleXMLDecoder = new SimpleXMLDecoder();
    var data:Object = decoder.decodeXML(xml);
    var array:Array = ArrayUtil.toArray(data.ArrayOfDemographic.Demographic);
    demographicBreakdown = new ArrayCollection(array);
    textArea1.text = demographicBreakdown[0].DemographicName.toString() + " " + demographicBreakdown[2].DemographicName.toString();
    label1.text=demographicBreakdown[0].DemographicName.toString();
]]>
</fx:Script>
<s:states>
<s:State name="portrait"/>
<s:State name="landscape"/>
<s:State name="landscapeSmall"/>
<s:State name="landscapeMedium"/>
<s:State name="landscapeLarge"/>
</s:states>
<fx:Declarations>

<demographicservice:DemographicService id="demographicService"/>
<s:CallResponder id="ResponderDemographicBreakdown" result="ResponderDemographicBreakdown_resultHandler(event)"/>
</fx:Declarations>
<s:navigationContent>
<s:Button icon="@Embed('assets/back.png')" click="navigator.popView();" height="55"/>
</s:navigationContent>
<mx:PieChart id="piechart1" x="10" y="37" dataProvider="{demographicBreakdown}"
     showDataTips="true"
     x.portrait="9" y.portrait="6" width.portrait="323" height.portrait="329">
<mx:series>
   <mx:PieSeries displayName="Demographic Breakdown" field="DemographicName" nameField="DemographicCount"/>
</mx:series>
</mx:PieChart>
<mx:Legend x="11" y="444" dataProvider="{piechart1}"
      x.portrait="10" y.portrait="338"/>
<s:TextArea id="textArea1" includeIn="portrait" x="110" y="464" height="331"/>
<s:Label id="label1" includeIn="portrait" x="497" y="400" text="Label"/>
</s:View>

Motion 3, DVD Studio Pro 3, Compressor...fail to display interface

Macbook Pro C2D, Leopard OS X 10.5.1. All apps were running perfectly before this happened...
First, all the apps of Final Cut Studio 2 crashed on startup.
I recall that the last thing I did is trashing the newly installed trail version Aperture.
After checking the crashing log, I found the problem comes from Prokit.framework. I did a thorough search, the answer is quite clear that the Prokit.framework comes with Aperture 1.5.2 is a PPC version, it replaced the intel version that was in my OS. So the solution is replacing the PPC version back to Prokit for Intel. Finally I found some provided download links of Prokit for Intel. BUT..
All the Prokit online are extracted with Pacifist from either Tiger OS disc or ProAppRuntime4.0.2.pkg(from apple's website). So they are either version 3.1 or version 4.0.2. After replacing my Prokit.framework with version 4.0.2, all my FCS 2 apps except Final Cut Pro (but Log and Transfer inside FCP 6) stopped crashing but failed to display any interface. But the icons are in the dock.
So finally I cleaned up all the files related to Final Cut Studio 2 and Prokit.framework and did a fresh reinstallation of FCS 2.
Same thing! No interface at all.
At this point, I doubt if the Prokit.framework in Leopard OS disc is different. It's too bad that I'm traveling for a project and my Leopard DVD is not in hand. So I asked a friend using Pacifist to extract Prokit.framework and Browser.framework from his Leopard DVD and sent them over. Now I found that they are indeed different. The one from Leopard is version 4.1. I did a replace again. Now, Motion 3, DVD Studio Pro 3 and Compressor start up, but with black windows and a few images, and the menu bars are really weird. I guess I should install this two framework with Pacifist instead of replacing them with the extracted folders?
The last resort I guess is to reinstall Leopard? My dilemma if I don't finish my project, I have no access to my OS DVD, but I need to use FCS 2 to finish the project.
Has anyone run into the same situation? Any enlightenment will be appreciated!

I have just installed Leopard ans having problems with DDVDSPRO crasshing, can you please expand on how i may install prokit.framework and Browerkit frame work with Pacifist. I am not an expert please bear in mind!!
many thanks

Flash chart doesn't display cyrillic characters

Hi !
Please give me you advise to solve my problem...
I tried to write X-axis labels on 2D-column chart using Cyrillic characters.
If I set "Labels Rotation" to a value more than 0 chart does not display labels. If labels consists of Cyrillic and Latin characters then only Latin characters are displayed.
Please help me to resolve this issue.
Best regards,
Renat.

That is possible.
The rotation functionality within html, if I understand it correctly, actually generates a graphic and rotates that rather than rotates the individual characters. It could be that this functionality just isn't designed for the characters you need.
This may be something you need to research on Adobe's website?
Andy

Pie Chart doesn't display all columns

I set up a simply table and made a bar chart = everything worked out well.
I selected my table again and clicked on 'make pie chart' but this time it doesn't display all the colums. I really don't know what went wrong here.
I'd appreciate it very much if some could help me out here.
Preview Picture: http://cl.ly/1SKg
Numbers File: http://cl.ly/1SAh

patte,
Even though you have selected the entire table to be charted as a Pie Chart, and the table includes three data series, a Pie Chart can only display one series at a time, so it displays the first one; "3. Klasse"
In "3. Klasse", the values of Schaukel and Drehscheibe are zero, so there is no pie to display.
Hope this explains the situation for you. To make Pie Charts for the other two series, you would again select the header cells, then hold down the Command key while selecting the other series. Then add another chart. Do this for each series you wish to chart.
Regards,
Jerry

Why does AI Read(Asynchronous).vi cause the waveform chart to not display any history ?

I trying to create a strip chart for 16 channels that will require displaying 10-20 minutes of data.It also starts a separate vi to set gains and offsets while displaying the data. Using AI Read.vi uses 100% of the CPU so the second vi does not run. But using AI Read (async).vi allows the second vi to run, but causes the waveform chart to not display the history? I'm using LabView version 6.0.2.

Hi Waynes World,
I have a couple of questions that may help us solve this issue...
1) If you are modifying one of our example programs, which one did you start with?
2) What kind of analog input are you doing? Buffered? Finite or continuous?
3) Have you tried increasing the buffer size of the strip chart? This will allow the chart to store more data in it.
4) When you use the Async VI, and when you are using the other, can you describe how the strip chart is showing the data... does the data in the chart keep growing and growing... or does it clear itself and start over when the pine reaches the end?
I think this issue is rooted in how the buffer is being used with the two different AI Reads and how it returns data to the chart.
On a side note, have you considered upgrading to a newer version of LabVIEW? Our latest versions of LabVIEW come with many new features and it is signifigantly easier to use.

Xcelsius Present - Pie Chart Does Not Display

I am evaluating a trial copy of Xcelsius Present and I am having trouble with creating a Pie Chart. I have imported my spreadsheet and have made my data selection, but the pie chart does not display. I have used Crystal Reports in the past and have never run across the problem. I have tried to create and import a new spreadsheet with the data needed for the pie chart, but I have the same problem with the chart not loading. This problem does not occur with other charts that I am creating.
Can anyone make a recommendation on what to do?
Thanks.
Anita

I'm having the same problem with the Xcelsius Present 2008 evaluation copy (5.3.0.0).
No matter how pie chart data is formatted, there is nothing displaying.
I'd like to know whether this is a known bug or whether this is only in the eval copy. This would prevent me from buying the product.

APEX - Flash Charts No Longer Displaying

Has anyone else experienced a situation where their Flash Charts suddenly stop displaying and no error messages are shown? I am on version 3.1.1.

Hi,
If it was working before then stopped working , the best place to start with is "what has changed?"
If your IP, hosting , protocols (read move from HTTP to HHTPS) or some server side detail has changed then you can expect this to happen.
Another possibility is that the swf folders were moved.
Regards,

Chart showing Dots displayed name above it..

Hi,
Im trying to get a chart showing dots (and some name should be displayed above dot)...Can anybody telll me whats the name of that chart and mostly im asking u for a link of that particular type of chart..(ie. chart showing dots as well as displaying some name above dot)..
i will be very happy if you would give me the link for that type of chart..I have searched in googl,but I just got a Dotted chart, but there is no name displayed above dot...
Thanks in advance...

Maybe I am just stupid BUT I don't have a clue what a "Chart showing Dots displayed name above it." is. Could you elaborate?

Embedded chart fails to display

Similar Messages

Maybe you are looking for