Embedded font errors after migrating pdfs to new web server

Hi All,
After hundreds of working pdfs were moved to new web server, they produce variations of the "cannot extract the embedded font" (name of font) "some characters may not display or print correctly" error. The first page loads perfectly and the rest never load. All these files open fine when I open local copies in Reader (9.1.3) and Professional (7.1.0).They also open fine when moved to another server. When I delete copies on the server and re-upload using the working copies, the errors persist. Doesn't make sense. I also occasionally get the error "there were problems reading this document (14)".
I was told by the IT department that a possible cause was that the new server environment used fonts installed on the server rather than the local machine to display pdfs. This doesn't make sense to me. I've researched these errors and haven't found anything applicable or that has worked. Any suggestions? Has anyone else expeienced this?
The server is IIS and is running ASP.net. The IT dudes are saying they need to install all the refferenced fonts on the web server but due to the expense of this, they can't.This will nessecitate a really bizzarre and Rube Goldbergesque workaround (that I'm not even going to try to explain here) that I'd really like to avoid. Any suggestions? Are there any Acrobat settings that need to be twekaed?

Hi,
I read the following on another discussion in this forum:
it appears that with the shortkey ctrl+shift+Y you can force the pc to work around the system fonts
Maybe that helps.
Jenny

Similar Messages

Export of PDF errors after the PDF generates on the server (File I/O error)

We have Crystal 9 reports engine, developed with VS2003, which is being called from a VS2008 web app on a 32-bit server. The reports have been working okay, unless the file is of size > 600K. Then, right after the PDF is created in the C:\Windows\Temp, the export fails to display it on the screen, throwing the following error:
Error in File C:\WINDOWS\TEMP\temp_c2e5676e-7d48-413e-9dca-fd2615f236c6.rpt: File I/O error.
at [1].[1]D(Int16   , Int32   ) at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export() at commisionstatement.CommissionStatementPDF.Page_Load(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain()
The issue is quite frustrating as it doesn't indicate what the cause of it is. It is not clear whether this is a timeout issue and what Timeout setting applies. The report objects have a default CacheTimeOut set as CachedReportConstants.DEFAULT_TIMEOUT. How long is this? is there any other setting on the server that can overwrite this timeout? What does the Export method need in order to find and pull the file on time?
Note that the report generates on the server and if it's not too big, will display on the Client's browser.
Your help will be greately appreciated.
Thank you,
Sonya

Hi David,
So we were finally able to test with the increased timeout, which we set to 5 min:
<httpRuntime
            executionTimeout="300"
            maxRequestLength="4096"
            useFullyQualifiedRedirectUrl="false"
            minFreeThreads="8"
            minLocalRequestFreeThreads="4"
            appRequestQueueLimit="100"
            enableVersionHeader="true"
        />
Unfortunately, now we started getting other errors, related to the limit of the licenses:
A Crystal Reports job failed because a free license could not be obtained in the time allocated. More licenses can be purchased direct from Crystal Decisions or through the Crystal Decisions Online Store.
According to page 8 of the article below, we should be able to purchase more such licenses free of cost:
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/7006fc4c-6a1e-2b10-8ea8-9019b136fa90?quicklink=index&overridelayout=true
Could you let us know how to proceed in order to obtain the licenses?
Thank you,
Sonya

After migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"

after migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"

You cannot run Photoshop CS on a new Intel-based Mac running OS X Mavericks. CS is far too old.
You'll have to buy Photoshop CS6 or Photoshop Elements 12. Or subscribe to CC.

Configuration Frozen Error after migrating to Weblogic 11g console extensio

We are using the console extension property of weblogic.
The jar used to deploy the same works fine with weblogic9 but gives the below error after migrating to Weblogic 10.3
The project also uses struts-Tiles configuartion. Is there any specific configuration to do after migration with respect to console extension?????
com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:697)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at org.apache.beehive.netui.util.internal.ServletUtils.throwServletException(ServletUtils.java:165)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:582)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1230)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
... 63 more
Caused by: java.lang.IllegalStateException: Configuration is frozen
at org.apache.struts.config.ForwardConfig.setPath(ForwardConfig.java:191)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processForwardConfig(ConsolePageFlowRequestProcessor.java:145)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
... 72 more

After more investigations I have more details:
1. the error does not occur if the base table does not have rowSelection=”single”
2. the error does not occur if the base table has rowSelection=”single” but the popup is raised with showPopupBehavior
3. the error only occurs when the base table has rowSelection=”single” and we call the popup as inline popup (taskFlow with jsf page)
I could not reproduce the error on a newly created application in Jdevelope 11.1.2.1, it only happens to migrated applications.
We can not give up to rowSelection=”single” because of master-detail structures.
Thank you,
Monica

Dump error after migration.

Dear Members,
The driver program for the smartfrom which I have created is throwing a dump error after migration to another server, please suggest me a solution.
Thanks,
Subhendu Gouda

Hello Subhendu,
Just pass the FM name of your smartfom using a variable like "w_fmodule".
* Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSUBHENDU_TEST',
w_fmodule TYPE rs38l_fnam,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION w_fmodule
EXPORTING
control_parameters = w_cparam
output_options = w_outoptions
IMPORTING
job_output_info = t_otf_from_fm
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope this solves your issue.
Cheers,
Suvendu

Session expired error after migration 11.1.1.1

We are taking a lots of session expired error after migrating our projects from 11.1.1.1. to the 11.1.1.0
How can we control session parameters in Jdev 11.1.1.1 and Web logic 10.1.3.1 ?
Thanks.

Hi,
its still the same setting in the web.xml file. However, I think the expiry you mean is the one raised by the client framework. As far as I remember there is no way to configure itslength. I'll take a not to see what the plans are in this regards. Can you confirm that its not the serve expiry but the message you get from ADF Faces RC?
Frank

After migrating to a new MacBook Air from an older MacBook, iPhoto gets stuck on uploading cache, it just "spins" forever. I downloaded a new iPhoto app and replaced it but when opened it just does the same thing? What is going on?

After migrating to a new MacBook Air from an older MacBook, iPhoto gets stuck on "uploading cache", it just "spins" forever. I downloaded a new iPhoto app and replaced it, but when opened it just does the same thing? What is going on? Where are my photos now? How can I upload photos from my camera without iPhoto?
Is there a better app?
Thanks, Chris

Take the system to an Apple store to be fixed or replaced as the one you have has defective hardware.

Reconfigure DPM after migrating Sharepoint to another SQL Server

How can I Reconfigure DPM after migrating Sharepoint to another SQL Server?

Hi,
I have tried this.
When I removed the SharePoint datasource from Protection group there was no option to keep or lose data.
I ran ConfigureSharePoint -EnableSharePointProtection and ConfigureSharePoint -ResolveAllSQLAliases , then refreshed view in DPM console and added SharePoint back to protection group.
The modify protection group screen showed success. looking in Monitoring, I see Consistency check failed with this error "DPM cannot continue protection for SharePoint Farm Sharepoint Farm\sqpl2008srv1\SharePoint_Config on spwfe1.internal.ermanz.govt.nz.
(ID 30184)" this followed with Recovery point failing as well and description was same error (as above).
I then removed the datasource again and created a new Protection Group and added SharePoint, but got same result. When creating the PG, it did not format space or do initial copy and CC's and RP's failed as before.
When DB's were moved to another SQL Server, SharePoint retained the same SQL name as before (uses aliases)

Runtime error and unable to create new web application

Hi
when i create new web application i faced this error Runtime error and unable to create new web application.
in this farm we have
2 wfe servers
2 application servers.
adil

Adil,
There could be many reason like IIS issue, Space issue, Permission issue, SQL issue which is not possible us to guess rather
you need to jump in the SharePoint log(Program Files\Common files\Microsoft Shared\Web Server Extensions\14\LOGS) and find out the specific error log its throwing after which trouble shoot can be start.
You can refer few similar threads here -
Link
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Cant get @font-face to work on my new web site

Hi everyone,
I Cant get @font-face to work on my new web site.
I tryed it before on other web sites and it worked just fine.
Here is the code i am using:
CSS:
@charset "utf-8";
@font-face {
font-family:"Caviar Dreams",sans-serif !important;
font-style: normal;
src:url ("../fonts/CaviarDreams.ttf") format('truetype');
src:url("../fonts/CaviarDreams.eot") format('eot');
src: url("../fonts/CaviarDreams.svg") format('svg');
src:url("../fonts/CaviarDreams.woff") format('woff');
src:url("../fonts/CaviarDreams.otf") format('otf');
/* Simple fluid media
Note: Fluid media requires that you remove the media's height and width attributes from the HTML
http://www.alistapart.com/articles/fluid-images/
img, object, embed, video {
max-width: 100%;
/* IE 6 does not support max-width so default to width 100% */
.ie6 img {
width:100%;
Dreamweaver Fluid Grid Properties
dw-num-cols-mobile: 5;
dw-num-cols-tablet: 8;
dw-num-cols-desktop: 10;
dw-gutter-percentage: 25;
Inspiration from "Responsive Web Design" by Ethan Marcotte
http://www.alistapart.com/articles/responsive-web-design
and Golden Grid System by Joni Korpi
http://goldengridsystem.com/
/* Mobile Layout: 480px and below. */
body{
background-image:url(../images/background/wraper_bg.jpg);
background-repeat:no-repeat;
background-attachment:fixed;
background-size:100% 100%;
font-family:"Caviar Dreams", sans-serif !important;
.caviar{
font-family:"Caviar Dreams", Arial, Helvetica, sans-serif ;
.index_bg{
width:100% !important;
height:100% !important;
background:url(../images/graphics/index_bg.png) !important;
background-size:cover !important;
.welcome_image{
position:absolute;
top:35%;
width:95% !important;
margin:2% !important;
.nav{
color:#FFFFFF !important;
font-family:"Britannic Bold" !important;
font-size:14px;
font-weight:lighter !important;
.background_white{
background:rgba(255,255,255,0.7);
.background_black{
background:rgba(0,0,0,0.65);
.background_black_2{
background:#000 !important;
.background_noir{
background:rgba(179,1,1,0.7);
.background_purple{
background:rgba(152,131,201,0.7)!important;
color:#FFFFFF !important;
width:100% !important;
height:25px;
text-decoration:none !important;
font-family:"Caviar Dreams" ;
border:0px !important;
margin:0px !important;
padding:0px !important;
.background_purple:hover{
background:#FFFF00!important;
color:#000 !important;
width:100% !important;
text-decoration:none !important;
font-family:"Caviar Dreams" ;
border:0px !important;
.white{
color:#FFFFFF !important;
.black{
color:rgba(0,0,0,1) !important;
.red{
color:#B30101 !important;
.yellow{
color:#FFFF00 !important;
.black_span{
background:#000000 !important;
color:#FFFFFF !important;
margin:1% !important;
margin-left:5px !important;
padding:5px !important;
.black_span_margin1{
margin-left:0px !important;
.black_span_margin2{
margin-left:0px !important;
.border_white{
border:3px solid #FFFFFF !important;
margin:0px !important;
padding:0px !important;
.border_gold{
border:0px solid #000!important;
margin:0px !important;
padding:0px !important;
h1, h2, h3, h4, h5, h6{
font-family:"Britannic Bold" !important;
font-weight:lighter !important;
color:#FFD700 !important;
margin-left:2% !important;
margin-right:2% !important;
margin-top:2% !important;
margin-bottom:2% !important;
p{
font-family:"Caviar Dreams", Arial, Helvetica, sans-serif !important;
font-size:16px !important;
color:#FFFFFF !important;
margin-left:2% !important;
margin-right:2% !important;
margin-top:2% !important;
margin-bottom:2% !important;
.text-small{
font-size:12px !important;
.caviar{
font-family:"Caviar Dreams" !important;
I am trying to use the font Caviar Dreams on my new web site but i cant get it right,
Can anyone tell me what is wrong.
And also i would like some help with IE9, it seems the header is displaying in blue instead of black on IE9 and 10.
My web site adrees is marcoalexwebdesign.site11.com .

I already fixed the issue, it seems trhat in dreamweaver the fonts ttf , otf, etc must be in a folder named webfonts, and then dreamweaver connects the fonts stylesheet to the main stylesheeet with @inport.I had to unisntall the fonts from my windows and download them again and add tehm with dreamweaver add web fonts feature.
Thanks ayway.

Got this error after deploying ear file into OC4J server.

Hello Frnsz,
Can any one help to resolve the following error :)
Got this error after deploying ear file into OC4J server.
2008-06-04 14:57:58.551 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/pager-taglib.tld
2008-06-04 14:57:58.566 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:57:58.566 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/struts-bean.tld
2008-06-04 14:57:58.598 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:57:58.598 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/struts-html.tld
2008-06-04 14:57:58.629 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:57:58.629 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/struts-logic.tld
2008-06-04 14:57:58.660 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:57:58.660 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/struts-nested.tld
2008-06-04 14:57:58.691 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:57:58.691 WARNING J2EE JSP-0027 Errors parsing file:/C:/Program Files/Java/oc4j/j2ee/home/applications/MyEarProject/MyEarProjectWeb/WEB-INF/tld/struts-tiles.tld
2008-06-04 14:57:58.723 NOTIFICATION Binding web application(s) to site default-web-site ends...
2008-06-04 14:57:58.723 NOTIFICATION Application Deployer for MyEarProject COMPLETES. Operation time: 3422 msecs
2008-06-04 14:58:04.895 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.910 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.926 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.942 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.957 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.973 WARNING J2EE JSP-0003 JSP Tld Cache Logging:
2008-06-04 14:58:04.973 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:04.973 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:04.973 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:04.989 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:04.989 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:04.989 WARNING J2EE JSP-0003 loading Tld's into cachedConfigTable:
2008-06-04 14:58:05.020 NOTIFICATION J2EE JSP-0008 Unable to dispatch JSP Page : Exception:oracle.jsp.parse.JspParseException: /WEB-INF/jsp/login.jsp: Line # 2, <%@ taglib uri="/WEB-INF/tld/struts-html.tld" prefix="html"%>
Error: java.lang.ClassNotFoundException: org.apache.struts.taglib.html.MessagesTei
Cheers,
Cap

Cross posted in correct forum
[http://forum.java.sun.com/thread.jspa?threadID=5302192]

LDAP is not working on new Web Server

Hi, I configured LDAP authentication and it was working fine. After this I installed a new web server. I copied the security certificate etc ( copied everything from other web server) onto new webserver. When I try to login into Infoview or CMC then I get error message "Security plugin error: Failed to set parameters on plugin" from the new web server. Its working fine from the old web servers.
Not sure what else I have to do now as I have done the same thing on old servers in the past.
We are on BOXI R2 SP3 with web server on IIS 6.0. We have three web servers and 3 processing servers ( with all services) in cluster env.
Thanks,

I am sorry I got confused with Pure Enterise authentication. I should have referred to my notes. I apologize for this. Web application server is involved in communicating to LDAP. Below is the process
1) User logs into the application
2) Web application server security plugin sends credential to LDAP directory
3) LDAP directory authenticate users.
4) Web application server's security plugin sends users credential to LDAP
5) CMS requests user and group info from LDAP
6) The LDAP returns this information to CMS Security plugin
7) CMS will grant access if users is member of mapped group
8) If access is granted then both CMS and WAS plugin create a session
9) The WAS sends an enterprise session token to user's browser
I was referring to login into Infoview using LDAP.
Thanks,

After upgrading to lion my web server won't run

after upgrading to lion my web server won't run

From System Prefs clicking on Web Shareing wont start.
From the terminal attempting to run httpd gives me:
iBookWiz:~ steve$ sudo httpd
httpd: Syntax error on line 117 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_fastcgi.so into server: dlopen(/usr/libexec/apache2/mod_fastcgi.so, 10): image not found

Can user roles by transferred to new web server?

Our ISP moved our files to a new web server since we were
running out of room on their old server. However, our user roles
did not get transferred. The settings for Administrator, Publisher
and Writer were moved, but our custom roles were not. Is there a
way for these roles to be transferred from the old server?
Thanks,
Kathy

Thanks for your response.
We aren't using CPS, but it looks like our ISP moved the
files from the _mm directory. But the cthub....csi file on the new
server is much smaller than it was on the old server (11 K vs 53
K). It looks like the default roles (Administrator, Publisher,
Writer) were moved somehow because the user names associated with
those roles are displayed. But none of our other roles are showing
up.
One other bit of information ... the name of our web
server/URL has changed with this move. I don't know if that would
make a difference.
Kathy

SBS 2008 - SBS Console and AD errors after migration to new hardware

Hi there,
I'm trying to work out how to fix some of the errors and random behaviour I'm experiencing with the SBS 2008 console and AD related matters since I had to quickly migrate SBS 2008 to new hardware using Windows Server Backup after a failure of the old server.
In my haste to get our email and ftp services back up and running (which use Smartermail and Filezilla respectively instead of Exchange etc) I overlooked the fact that the new server had 3 NICs installed and not one and so restored SBS 2008 and loaded up new
drivers for those and other hardware that had changed (such as the graphics card and mobo. I have since removed the two additional NICs by disabling them on the mobo).
Whilst I got the server up and running again with email and ftp services, even though I currently don't use any AD related stuff directly I have since noted that if I try to say view a list of users that I had previously created via the SBS console, more often
than not it will show no users, and then randomly it will (but when you do see them you can't edit or delete them. I'm aware that I have probably broken a number of golden rules in doing this 'migration' but having a metaphorical gun to my head meant that
I rushed things out of desperation.
Common errors that I experience generally will say things like 'Current security connect is not associated with an Active Directory domain or forest' if I try to list users, or DC not found for domain "xyz.local' etc. I have been searching the net and
trying out some things to fix this but I'm like a dog chasing its tail as I'm not so clued up on server related issues as I am with workstation problems, so if anyone could at least point me in the right direction I would be very grateful. If you require any
info from me (eg diag logs etc) I will be happy to provide them!
Regards,
Dave

Hi Dave,
Based on current situation, please run SBS BPA and fix all that it can find, then monitor the result. For more details, please refer to the following KB.
Windows SBS Best Practices Analyzer (BPA)
Meanwhile, please refer to the following article and repair SBS console.
Repair the Windows SBS 2008 Console
By the way, I noticed that you had got some error messages (such as: “DC not found for domain” and so on). Would you please let me know complete error messages? In addition, when you migrate SBS 2008 to the new hardware, had you done any preparation for
that Source Server? For more details, please refer to the following article.
Migrate Windows Small Business Server 2008 to New Hardware
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Embedded font errors after migrating pdfs to new web server

Similar Messages

Maybe you are looking for