Embedded machine losing IP address after reboot
I have an industrial PC running a trial version of Windows Embedded Standard. It has a hard-coded IP address, and is scheduled to reboot every night. Every so often (3 times in the last 2 weeks), the device
will reboot, but another IP address will get assigned to the device. This device is NOT set up for DHCP. Looking through event viewer, I see a warning after the scheduled reboot stating that the device
cannot resolve our web address (which is expected since it no longer holds a valid IP). There is an error following that message stating that "The Superfetch service terminated with the following error: The system cannot find the file specified".
Rebooting the device again often resolves the issue - the device takes the correct IP address.
Has anyone ever run into an issue where a device running this OS loses its IP address after reboot?
This forum is for WE POSReady. You might also post to a WES forum
http://social.msdn.microsoft.com/Forums/en-US/home?forum=quebecmisc
Do you know if the OS is WES2009 or WES7?
Is EWF or FBWF enabled in the image?
What is the boot media?
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET
Similar Messages
-
IOS 7 - iPad losing proxy password after reboot?
Hi,
After the release of iOS 7, when an iPad is rebooted or runs out of charge etc... The iPad will lose the proxy password?
It seems to remember the username and proxy address/port.
Apple can you fix this ASAP...
Hundreds of iPad's are in use with Education now requiring a Proxy server/Password etc... and it losing it's settings everytime is NOT acceptable.For what it is worth, I have seen the exact same thing. This is clearly a severe Apple bug.
have filed an Apple Bug Report, and you should do the same to make sure they fix this: http://bugreport.apple.com -
SGE2000P looses the manually configured ipv4 address after reboot
I'm configuring a new SGE2000P Switch as standalone. As part of the configuration i need to assign a new IPV4 address to the switch instead the default one 192.168.1.254. After i apply the changes everything works fine, but when the switch get rebooted the ip address get back to the default one. Any help with this issue will be appreciated.
ElkinsHello Evillalona,
I was just looking at the issue you are having and wanted to check with you about the issue.
When you change the settings in the switch are you then going to the file managment section
of the switch and doing a copy the running config to the startup config? Just wanted to make
check and see if that would fix the problem you are having. I have heard of other people having
the same problem and that was the fix for them.
Thank you, -
Wife's windows machine losed ip address and wifi, macbook stays connected
Every once in awhile my wife's computer ip address must be refreshed, but sometime she is unable to do that. At that time she has to disconnect the wifi router and reconnect, and then she is able to connect. I do not lose connection on my macbook. I know this is a mac forum, but I am hoping someone could shed some light on this. Her computer is an HP and the router is a Belkin. We have a cable modem, metrocast.
thanks!I can't help here, but perhaps this FAQ will - http://pondini.org/TM/AEQ2.html.
Clinton -
After Reboot Hyper-V client machine Picks APIPA
hi
we have a very small environment hosted on Hyper-V 2012 R2. this issue is with the client machines, whenever they are restarted the machine picks up APIPA, i tried giving manual IP address but still after reboot the client would not ping after logging in
the server via hyper-v manager console and checking the network adapter status we came to know that its again picked up APIPA even after giving static IP.
so everytime to resolve this we will have manually login to all the clients via hyper-v manager console and go to network adapter properties then disable it and renable it.
Kindly suggest if there is any other way to resolve this issue permanently
Micheal NishitHi Sir,
>>whenever they are restarted the machine picks up APIPA,
>>so everytime to resolve this we will have manually login to all the clients
via hyper-v manager console and go to network adapter properties then disable it and renable it.
Generally , getting an APIPA address means IP conflict , please check if the conflict exists .
"ALL the clients" means all of the VMs runnng on that hyper-v host ？
So far , I haven't seen this in hyper-v enviornment .
You also can try to disable APIPA :
http://www.windowstechinfo.com/2013/07/disabling-apipa-automatic-private-ip.html
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
My Macbook was hacked by somebody right after activating downloaded VLC player.
I couldn’t control my machine. Every thing was messed up! Finally after reboot I realized that even my administration password was changed. Stupid hint I was able to reed: What located in box above low case ? I used my friends computer and founded hot to fix my problem using Unix commands to reboot in a single user mode. I founded a lot of different solutions which had prity the same beginnings but very complicated continuation, which, I understood will force me to cach during restoration anuther crap – time bomb in my mac! Finaly I did restor. somehow. But still feel somebodyies presents. Safary messed up – I will send you a log Itunes – messed up. Speaker in a top menu – grayed, and I can’t control my volume. But the most triky thing – bouth my Apple keybords – internal and mostly bluetouth external also working and typing wired! I am sorry for my spelling, because I cant check spell for Mac’s Word (in Microsoft it was F7) I have also several attacks from my neighbors by community I know their names, because they are somethere very close to me – I can see them throuth FI-FI connection. They often kick-me out from my place and started to use my resaurces. And also Mackeeper make me a hard time!
In Microsoft times u just reinstalled computer – clean installetion from corporate licensed disk. But now I am a beginner in MAC – I love it! But a lot of new and triky – at this way
Fore example – my goal – to do fool Macbook backup at external USB drive using boot srartup option and make my life yaser in case of crash. But now, I don’t know if I can trust recommended program Carbon copy cloner – Ms. Bombich?
I am very sorry for my spelling, because I feel somebodies presents, who playin with me.
Final question Do I need some antivirus Mac compatable which is update paches, service packs? How to map defolt documents folder not to a local, but to external USB?
Esquse me for a lot of questions, but I am beginner in MAC, and I LOVE it!
PS. Good news. Looks like Safari came back! Somebody, probably allredy helping!
But my interface qute different from original – so something still wrong!Didn't really read much at all of your post. Much, much too long, irrelevant details and & no paragraphs.
Can't use time machine due to corruptness
Post over here -> Mac OS X v10.6 - Snow Leopard forum
About my macbook and apple ID how can I upgrade my Macbook from 10.6.3 to 10.6.8 with out all the permissions being changed and corrupt??
Same as above. Post in the correct forum.
Need to gain access to my apple Id that would be a great start
-> http://support.apple.com/kb/HT5625 -
Cannot start the db after reboot machine
Hi,
Oracle DB: 10.2.0
OS: RHEL5
Successfully installed db and created the database.
but after reboot of machine I cannot start the database.
I have tried all the possible means( i deleted the listener and tns, recreated again rebooted etc etc)
oracle@med ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 5 13:48:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
ERROR:
ORA-12162: TNS:net service name is incorrectly specified
SQL> conn sys/medisys@rmct as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Thanking you,
regards,risingstar wrote:
Hi,
Thanks for ur reply
plz have a look
[oracle@med ~]$ cd $ORACLE_HOME/dbs
[oracle@med dbs]$ ls
hc_rmct.dat init.ora initrmct.ora orapwrmct sqlnet.log
initdw.ora init.ora.84201013612 lkRMCT spfilermct.ora
regards,Well.You see that your sid is rmct not RMCT then
export ORACLE_SID=rmct
sqlplus "/as sysdba"
startup -
IPFW losing rules after reboot
I am trying to block port 137 UDP and TCP and after I reboot the rules are gone. I run the following commands:
sudo ipfw add 1 deny tcp from any to any 137 out
sudo ipfw add 2 deny udp from any to any 137 out
Before a reboot I run sudo ipfw list and things look great.....reboot and run it again and I just see the default rule.
Probably a stupid question, but I can't find the answer anywhere and I am a noob with ipfw. And Leopard just mixes the whole process up as well with ipfw and its new application firewall.
So I guess my questions are: Why do the rules disappear? How do I get the rules to stay?
Thanks,
DanHi
It sounds like you need to configure a startup script without a startup script when you reboot your computer- the computer "forgets" the ipfw rules
You can google the search terms : "ipfw startup script " "launch daemons ipfw " " ipfw rules gone after reboot" "shell script launch firewall rules ipfw" "ipfw startup plist " -OR-
You can use WATERROOF waterroof is a free application that will help you configure your ipfw rules waterroof will also install a startup script and a startup plist on your hard drive
Check out this link to the waterroof website
http://www.hanynet.com/waterroof/
Hope This Helps -
Lion takes 15 seconds to log in after reboot on Macbook Pro 13" (early 2011)
I have been having sluggish performance (repeated beachballs, etc.) on my Macbook Pro 13-inch (2.7 GHz Intel Core i7, 4 GB RAM), which I bought this summer pre-installed with Lion.
I didn't migrate my old system, I just installed everything on my new machine. After about 9 years of OS X upgrades on various machines, I decided to start fresh and just installed my applications and transferred the data manually. It took some time, but I wanted it lean and clean.
Within weeks though, things were starting to slow down. This morning, it took over 15 seconds after reboot before I could even log in to my user account (I clicked on the icon for my account, and after 4-5 seconds it beachballed for 10 seconds before the field for the password "slid" into place).
I've tried checking and unchecking having Lion restore my previous session before rebooting; closing all applications before restarting; not closing applications before restarting. But consistently, right after logging in for several minutes, and then after several hours of use (and/or the next day, if I put my laptop to sleep instead of shutting it down) opening, saving documents, viewing mailboxes after opening Mail, or even viewing folder contents in the Finder can take from several to 30+ seconds.
Here is the log from my most recent boot. I have Dropbox, LogMeIn, Default Folder, and Growl (the pre-App Store version), and I have Parallels (which I very rarely use), but I don't see why any of these would slow down my machine before I even log in. Besides this, I have pretty standard fair applications. I would very much appreciate any help/advice!
06/12/11 02:57:20,000 bootlog: BOOT_TIME 1323161840 0
06/12/11 02:57:35,567 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
06/12/11 02:57:36,000 kernel: PMAP: PCID enabled
06/12/11 02:57:35,578 UserEventAgent: CertsKeychainMonitor: configuring
06/12/11 02:57:35,752 UserEventAgent: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 12551
06/12/11 02:57:35,752 UserEventAgent: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
06/12/11 02:57:36,000 kernel: Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
06/12/11 02:57:36,000 kernel: vm_page_bootstrap: 987432 free pages and 52952 wired pages
06/12/11 02:57:36,000 kernel: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
06/12/11 02:57:36,000 kernel: zone leak detection enabled
06/12/11 02:57:36,000 kernel: standard timeslicing quantum is 10000 us
06/12/11 02:57:36,000 kernel: mig_table_max_displ = 73
06/12/11 02:57:36,000 kernel: TSC Deadline Timer supported and enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: calling mpo_policy_init for TMSafetyNet
06/12/11 02:57:36,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
06/12/11 02:57:36,000 kernel: calling mpo_policy_init for Sandbox
06/12/11 02:57:36,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
06/12/11 02:57:36,000 kernel: calling mpo_policy_init for Quarantine
06/12/11 02:57:36,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
06/12/11 02:57:36,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
06/12/11 02:57:36,000 kernel: The Regents of the University of California. All rights reserved.
06/12/11 02:57:36,000 kernel: MAC Framework successfully initialized
06/12/11 02:57:36,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
06/12/11 02:57:36,000 kernel: IOAPIC: Version 0x20 Vectors 64:87
06/12/11 02:57:36,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
06/12/11 02:57:36,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
06/12/11 02:57:36,000 kernel: [ PCI configuration begin ]
06/12/11 02:57:36,000 kernel: AppleIntelCPUPowerManagement: Turbo Ratios 0057
06/12/11 02:57:36,000 kernel: AppleIntelCPUPowerManagement: (built 21:08:10 Aug 9 2011) initialization complete
06/12/11 02:57:36,000 kernel: console relocated to 0xf10000000
06/12/11 02:57:36,000 kernel: PCI configuration changed (bridge=16 device=4 cardbus=0)
06/12/11 02:57:36,000 kernel: [ PCI configuration end, bridges 12 devices 16 ]
06/12/11 02:57:36,000 kernel: mbinit: done [64 MB total pool size, (42/21) split]
06/12/11 02:57:36,000 kernel: Pthread support ABORTS when sync kernel primitives misused
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
06/12/11 02:57:36,000 kernel: AppleIntelCPUPowerManagementClient: ready
06/12/11 02:57:36,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffe1f2470; max speed s800.
06/12/11 02:57:36,000 kernel: BTCOEXIST off
06/12/11 02:57:36,000 kernel: wl0: Broadcom BCM4331 802.11 Wireless Controller
06/12/11 02:57:36,000 kernel: 5.100.98.75
06/12/11 02:57:36,000 kernel: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
06/12/11 02:57:36,000 kernel: rooting via boot-uuid from /chosen: 96C21F61-797D-3976-A440-77523146C652
06/12/11 02:57:36,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
06/12/11 02:57:36,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartitionScheme/Customer@2
06/12/11 02:57:36,000 kernel: BSD root: disk0s2, major 14, minor 2
06/12/11 02:57:36,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
06/12/11 02:57:36,000 kernel: Kernel is LP64
06/12/11 02:57:22,205 com.apple.launchd: *** launchd[1] has started up. ***
06/12/11 02:57:35,250 com.apple.launchd: (com.parallels.desktop.launchdaemon) Unknown key for boolean: HopefullyExitsFirst
06/12/11 02:57:35,250 com.apple.launchd: (com.stclairsoft.DefaultFolderXAgent) Unknown key for string: Version
06/12/11 02:57:35,250 com.apple.launchd: (com.stclairsoft.DefaultFolderXAgent) Unknown key: Version
06/12/11 02:57:38,000 kernel: BCM5701Enet: Ethernet address 3c:07:54:11:19:ea
06/12/11 02:57:38,000 kernel: AirPort_Brcm4331: Ethernet address 28:cf:da:d7:d5:9c
06/12/11 02:57:38,000 kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
06/12/11 02:57:38,000 kernel: IO80211Interface::efiNVRAMPublished():
06/12/11 02:57:39,000 kernel: Previous Shutdown Cause: 5
06/12/11 02:57:39,000 kernel: DSMOS has arrived
06/12/11 02:57:39,082 airportd: _processDLILEvent: en1 attached (down)
06/12/11 02:57:40,000 kernel: Created virtif 0xffffff800ba49c00 p2p0
06/12/11 02:57:40,000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
06/12/11 02:57:40,124 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
06/12/11 02:57:40,124 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06/12/11 02:57:40,124 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,132 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06/12/11 02:57:40,516 com.apple.SecurityServer: Session 100000 created
06/12/11 02:57:41,763 configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
06/12/11 02:57:41,763 configd: DHCP en1: INIT-REBOOT transmit failed
06/12/11 02:57:41,778 configd: setting hostname to "MacBook-Pro-dAutrefois.local"
06/12/11 02:57:41,782 configd: network configuration changed.
06/12/11 02:57:41,934 mDNSResponder: mDNSResponder mDNSResponder-320.10 (Aug 2 2011 19:56:51) starting OSXVers 11
06/12/11 02:57:44,952 com.apple.SecurityServer: Entering service
06/12/11 02:57:45,892 systemkeychain: done file: /var/run/systemkeychaincheck.done
06/12/11 02:57:45,905 configd: network configuration changed.
06/12/11 02:57:45,907 configd: network configuration changed.
06/12/11 02:57:45,908 mDNSResponder: D2D_IPC: Loaded
06/12/11 02:57:45,908 mDNSResponder: D2DInitialize succeeded
06/12/11 02:57:45,910 mDNSResponder: Adding registration domain autrefois.members.mac.com.
06/12/11 02:57:46,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:46,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:46,425 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
06/12/11 02:57:46,425 com.apple.pfctl: No ALTQ support in kernel
06/12/11 02:57:46,425 com.apple.pfctl: ALTQ related functions disabled
06/12/11 02:57:46,548 Parallels: Loading kernel extension prl_hypervisor.kext
06/12/11 02:57:47,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:47,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:47,000 kernel: AppleBCM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?
06/12/11 02:57:48,000 kernel: en1: 802.11d country code set to 'US'.
06/12/11 02:57:48,000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
06/12/11 02:57:48,000 kernel: MacAuthEvent en1 Auth result for: 00:25:bc:8d:98:b5 MAC AUTH succeeded
06/12/11 02:57:48,000 kernel: wlEvent: en1 en1 Link UP
06/12/11 02:57:48,000 kernel: AirPort: Link Up on en1
06/12/11 02:57:48,000 kernel: en1: BSSID changed to 00:25:bc:8d:98:b5
06/12/11 02:57:48,423 Parallels: Loading kernel extension prl_hid_hook.kext
06/12/11 02:57:48,946 awacsd: Starting awacsd connectivity-47 (Jul 7 2011 20:52:38)
06/12/11 02:57:48,956 awacsd: Connecting AWACS client: autrefois
06/12/11 02:57:49,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:49,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:49,000 kernel: AirPort: RSN handshake complete on en1
06/12/11 02:57:49,000 kernel: /drv/ HypApic.c:230 Host APIC phy 0xFEE00000 lin 0xffffff807edde000 ver 0x15
06/12/11 02:57:49,000 kernel: /drv/ HypVtd.c:3718 [vtdInit]
06/12/11 02:57:49,000 kernel: /drv/ HypVtd.c:3734 [vtdInit] VTD initialization disabled
06/12/11 02:57:49,000 kernel: /drv/ HypLowCache.c:173 Low cache initialized (6848 kB for 8 VMs on 4096 MB)
06/12/11 02:57:49,000 kernel: /drv/ HypSMBios.c:54 Failed to find SMBios entry point
06/12/11 02:57:49,000 kernel: /drv/ HypModule.c:174 Parallels IPI irq = 0 ipi = 0(0x0)
06/12/11 02:57:49,000 kernel: /drv/ HypModule.c:181 Parallels Hypervisor 6.0.12094.676494 loaded.
06/12/11 02:57:49,241 com.apple.usbmuxd: usbmuxd-263 on Aug 23 2011 at 00:44:06, running 64 bit
06/12/11 02:57:49,422 UserEventAgent: ServermgrdRegistration cannot load config data
06/12/11 02:57:49,462 rpcsvchost: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
06/12/11 02:57:50,516 Parallels: Loading kernel extension prl_usb_connect.kext
06/12/11 02:57:51,000 kernel: /prl_hid/ Parallels HID Helper started.
06/12/11 02:57:51,314 xpchelper: for uid: 222 -- timeout while waiting on FSEvents flush; clearing cache.
06/12/11 02:57:53,488 xpchelper: for uid: 0 -- timeout while waiting on FSEvents flush; clearing cache.
06/12/11 02:57:53,662 loginwindow: Login Window Application Started
06/12/11 02:57:54,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:54,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:54,460 Parallels: Trying to load kernel extensions, exit status: 0
06/12/11 02:57:57,520 mds: (Normal) FMW: FMW 0 0
06/12/11 02:57:58,384 Parallels: Starting Parallels networking...
06/12/11 02:57:58,484 configd: network configuration changed.
06/12/11 02:57:58,500 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
06/12/11 02:57:58,500 UserEventAgent: CaptiveNetworkSupport:CNSPreferencesBuildSSIDLookup:278 ssidLookup:
06/12/11 02:57:58,500 UserEventAgent: <empty>
06/12/11 02:58:11,435 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
06/12/11 02:58:11,436 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
06/12/11 02:58:11,496 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
06/12/11 02:58:11,572 com.apple.launchd: (com.apple.netbiosd[99]) Exited abnormally: Hangup: 1
06/12/11 02:58:12,198 Parallels: Loading kernel extension prl_netbridge.kext
06/12/11 02:58:12,644 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:58:12,652 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:58:16,412 UserEventAgent: servermgr_certs[11] -[CertsRequestHandler(HelperAdditions) identitiesFromKeychain:]: SecItemCopyMatching (err = -25300)
06/12/11 02:58:16,414 com.apple.UserEventAgent-System: SecItemCopyMatching: L’élément spécifié est introuvable dans le trousseau.
06/12/11 02:58:16,417 UserEventAgent: servermgr_certs[11] -[CertsRequestHandler(HelperAdditions) identitiesFromKeychain:]: SecItemCopyMatching (err = -25300)
06/12/11 02:58:16,417 com.apple.UserEventAgent-System: SecItemCopyMatching: L’élément spécifié est introuvable dans le trousseau.
06/12/11 02:58:16,417 UserEventAgent: CertsKeychainMonitor: ready to process keychain & timer events
06/12/11 02:58:17,960 Parallels: Loading kernel extension prl_vnic.kext
06/12/11 02:58:18,000 kernel: com.parallels.kext.prlnet 6.0.12094.676494 has started.
06/12/11 02:58:19,946 ntpd: proto: precision = 1.000 usec
06/12/11 02:58:21,000 kernel: macx_swapon SUCCESS
06/12/11 02:58:22,652 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on Merrol's Network because it is protected and not on the exception list
06/12/11 02:58:22,655 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
06/12/11 02:58:22,000 kernel: com.parallels.kext.vnic 6.0.12094.676494 has started.
06/12/11 02:58:22,656 configd: network configuration changed.
06/12/11 02:58:23,000 kernel: utun_ctl_connect: creating interface utun0
06/12/11 02:58:24,000 kernel: nspace-handler-set-snapshot-time: 1323161906
06/12/11 02:58:24,757 awacsd: RouteDiscovery: sendmsg error (6): Device not configured
06/12/11 02:58:25,000 kernel: utun_ctl_connect: creating interface utun0
06/12/11 02:58:25,000 kernel: utun0: attached with 0 suspended link-layer multicast membership(s)
06/12/11 02:58:26,838 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
06/12/11 02:58:27,206 com.apple.mtmfs: /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//mtmfsMap64
06/12/11 02:58:27,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:58:30,892 com.apple.launchd: (com.logmein.logmeinguiagent) Unknown key for boolean: UseLMILaunchAgentFixer
06/12/11 02:58:30,895 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
06/12/11 02:58:32,589 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:58:32,791 com.apple.SecurityServer: Session 100005 created
06/12/11 02:58:32,792 loginwindow: Login Window Started Security Agent
06/12/11 02:58:33,175 SecurityAgent: Echo enabled
06/12/11 02:58:33,175 SecurityAgent: Echo enabled
06/12/11 02:58:37,449 SecurityAgent: User info context values set for autrefois
06/12/11 02:58:37,449 SecurityAgent: User info context values set for autrefois
06/12/11 02:58:38,379 authorizationhost: Failed to authenticate user <autrefois> (error: 9).
06/12/11 02:58:42,604 vpnagent: Cisco AnyConnect VPN Client Agent started, version 2.5.3041
06/12/11 02:58:42,680 vpnagent: Function: initMsgCatalog File: i18n/MsgCatalog.cpp Line: 179 Current locale: en-us
06/12/11 02:58:42,681 vpnagent: Function: loadProfiles File: ProfileMgr.cpp Line: 112 No profile is available.
06/12/11 02:58:42,682 vpnagent: Function: fileExists File: Utility/sysutils.cpp Line: 500 Invoked Function: _tstat Return Code: 2 (0x00000002) Description: unknown File: /opt/cisco/vpn/AnyConnectLocalPolicy.xml Error: No such file or directory
06/12/11 02:58:44,239 vpnagent: Current Preference Settings: CertificateStoreOverride: false CertificateStore: All ShowPreConnectMessage: false AutoConnectOnStart: false MinimizeOnConnect: true LocalLanAccess: false AutoReconnect: true AutoReconnectBehavior: DisconnectOnSuspend AutoUpdate: true ProxySettings: Native AllowLocalProxyConnections: true PPPExclusion: Disable PPPExclusionServerIP: AutomaticVPNPolicy: false TrustedNetworkPolicy: Disconnect UntrustedNetworkPolicy: Connect TrustedDNSDomains: TrustedDNSServers: AlwaysOn: false ConnectFailurePolicy: Closed AllowCaptivePortalRemediation: false CaptivePortalRemediationTimeout: 5 ApplyLastVPNLocalResourceRules: false AllowVPNDisconnect: true EnableScripting: false TerminateScriptOnNextEvent: false EnableAutomaticServerSelection: false AutoServerSelectionImprovement: 20 AutoServerSelectionSuspendTime: 4 AuthenticationTimeout: 12
06/12/11 02:58:44,617 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:44,617 vpnagent: Function: logInterfaces File: RouteMgr.cpp Line: 2076 Invoked Function: logInterfaces Return Code: 0 (0x00000000) Description: IP Address Interface List:
06/12/11 02:58:44,617 vpnagent: Function: readConfigParamFromFile File: vpnconfig.cpp Line: 3171 The specified configuration file for MUS service does not exist
06/12/11 02:58:44,617 vpnagent: Default route not cleared, no store
06/12/11 02:58:44,725 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:44,725 vpnagent: Function: applyHostConfigForNoVpn File: MainThread.cpp Line: 7570 No network interface is available, will not apply the noVPN host configuration.
06/12/11 02:58:44,725 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:44,793 com.logmein.logmeinguiagent: 2011-12-06 02:58:44.792 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:58:44,793 com.logmein.logmeinguiagent: 2011-12-06 02:58:44.792 - Info - LMIGUIAgent - Main - started:159 uid:0 (parent:1 launchd)
06/12/11 02:58:44,793 com.logmein.logmeinguiagent: 2011-12-06 02:58:44.792 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:58:45,244 com.logmein.logmeinguiagent: 2011-12-06 02:58:45.244 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:58:45,497 com.logmein.logmeinguiagent: 2011-12-06 02:58:45.496 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:58:45,812 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,813 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,813 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,000 kernel: com_parallels_kext_prl_vnic: created vnic0
06/12/11 02:58:45,000 kernel: com_parallels_kext_prl_vnic: created vnic1
06/12/11 02:58:45,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:58:45,814 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,815 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,815 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,891 Parallels: Parallels networking sucessfully started
06/12/11 02:58:45,893 Parallels: Restarting CiscoVPN
06/12/11 02:58:46,093 SystemStarter: Unknown service: CiscoVPN
06/12/11 02:58:46,096 Parallels: Starting Parallels Dispatcher Service
06/12/11 02:58:46,099 Parallels: Parallels Dispatcher Server sucessfully started
06/12/11 02:58:46,944 ntpd: bind(32) AF_INET6 fe80::21c:42ff:fe00:8%9#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,944 ntpd: unable to create socket on vnic0 (11) for fe80::21c:42ff:fe00:8#123
06/12/11 02:58:46,944 ntpd: bind(32) AF_INET6 fec0:0:0:fea9::1#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,944 ntpd: unable to create socket on vnic0 (12) for fec0:0:0:fea9::1#123
06/12/11 02:58:46,944 ntpd: bind(33) AF_INET6 fe80::21c:42ff:fe00:9%10#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,945 ntpd: unable to create socket on vnic1 (14) for fe80::21c:42ff:fe00:9#123
06/12/11 02:58:46,945 ntpd: bind(33) AF_INET6 fec0:0:0:feaa::1#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,945 ntpd: unable to create socket on vnic1 (15) for fec0:0:0:feaa::1#123
06/12/11 02:58:47,155 prl_naptd: Starting Parallels Network Daemon
06/12/11 02:58:48,686 prl_naptd: vnic0: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
06/12/11 02:58:48,687 prl_naptd: vnic1: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
06/12/11 02:58:49,000 kernel: vnic0: promiscuous mode enable failed
06/12/11 02:58:49,000 kernel: vnic1: promiscuous mode enable failed
06/12/11 02:58:49,726 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:49,726 vpnagent: Function: applyHostConfigForNoVpn File: MainThread.cpp Line: 7570 No network interface is available, will not apply the noVPN host configuration.
06/12/11 02:58:49,726 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:50,000 kernel: utun_ctl_connect: creating interface utun1
06/12/11 02:58:50,000 kernel: SIOCPROTODETACH_IN6: utun1 error=6
06/12/11 02:58:51,075 com.logmein.logmeinguiagent: 2011-12-06 02:58:51.075 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:58:51,472 com.logmein.logmeinguiagent: Cannot create socket:/var/tmp/com.logmein.LMIServer/AgentSocket errno: (61) Connection refused
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.842 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - started:204 uid:0 (parent:1 launchd)
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:58:52,844 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:58:53,365 com.logmein.logmeinguiagent: 2011-12-06 02:58:53.365 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:58:53,365 com.logmein.logmeinguiagent: Cannot create socket:/var/tmp/com.logmein.LMIServer/AgentSocket errno: (61) Connection refused
06/12/11 02:58:53,367 com.apple.launchd: (com.logmein.logmeinguiagent) Throttling respawn: Will start in 10 seconds
06/12/11 02:58:56,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:56,000 kernel: /drv/ HypIoctls.c:912 Ioctl VT-d status: 0
06/12/11 02:58:58,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:58,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:58,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:59,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:59:00,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - started:206 uid:0 (parent:1 launchd)
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.388 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:59:03,910 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.909 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:59:03,910 com.logmein.logmeinguiagent: Cannot create socket:/var/tmp/com.logmein.LMIServer/AgentSocket errno: (61) Connection refused
06/12/11 02:59:03,911 com.apple.launchd: (com.logmein.logmeinguiagent) Throttling respawn: Will start in 10 seconds
06/12/11 02:59:04,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:59:06,880 SecurityAgent: User info context values set for autrefois
06/12/11 02:59:06,880 SecurityAgent: User info context values set for autrefois
06/12/11 02:59:08,197 SecurityAgent: Login Window login proceeding
06/12/11 02:59:08,197 SecurityAgent: Login Window login proceeding
06/12/11 02:59:08,550 loginwindow: Login Window - Returned from Security Agent
06/12/11 02:59:08,557 loginwindow: USER_PROCESS: 68 console
06/12/11 02:59:08,588 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:59:08,667 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
06/12/11 02:59:08,793 com.apple.launchd.peruser.501: (com.logmein.logmeingui) Unknown key for boolean: UseLMILaunchAgentFixer
06/12/11 02:59:08,793 com.apple.launchd.peruser.501: (com.logmein.logmeinguiagent) Unknown key for boolean: UseLMILaunchAgentFixer
06/12/11 02:59:08,794 com.apple.launchd.peruser.501: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
06/12/11 02:59:08,796 com.apple.launchctl.Aqua: load: option requires an argument -- D
06/12/11 02:59:08,796 com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
06/12/11 02:59:09,568 UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 19471
06/12/11 02:59:09,741 com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[210]) Exited with code: 1
06/12/11 02:59:12,510 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.421 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:59:12,510 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.508 - Info - LMIGUIAgent - Main - started:243 uid:501 (parent:176 launchd)
06/12/11 02:59:12,510 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.508 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:59:12,511 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.510 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:59:12,511 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.510 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:59:12,511 prl_naptd: Starting Parallels Network Daemon
06/12/11 02:59:13,488 LogMeInGUI: LogMeIn GUI started
06/12/11 02:59:14,000 com.logmein.logmeinguiagent: 2011-12-06 02:59:13.999 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:59:17,283 sudo: root : TTY=unknown ; PWD=/ ; USER=autrefois ; COMMAND=/bin/launchctl load /Library/LaunchAgents/com.parallels.vm.prl_pcproxy.plist
06/12/11 02:59:17,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:59:17,832 [0x0-0x14014].com.elgato.eyetvhelper: EyeTV Helper version 3.5.2 build 306
06/12/11 02:59:18,596 LogMeInGUI: Config watcher thread started
06/12/11 02:59:18,650 LogMeInGUI: applicationDidFinishLaunching
06/12/11 02:59:18,664 sudo: root : TTY=unknown ; PWD=/ ; USER=autrefois ; COMMAND=/bin/launchctl start com.parallels.vm.prl_pcproxy
06/12/11 02:59:19,820 LogMeInGUI: remoteControl:INACTIVE
06/12/11 02:59:19,843 LogMeInGUI: processLine:ACCESSMASK: 18446743936270597119
06/12/11 02:59:25,431 Mail: Using V2 Layout
06/12/11 02:59:27,111 SystemUIServer: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:27,112 com.apple.SystemUIServer.agent: SystemUIServer: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:27,123 Dock: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:27,123 com.apple.Dock.agent: Dock: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:27,400 Finder: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:27,400 com.apple.Finder: Finder: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: Entered INJECT_pthread_entry
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: Installing event loop timer
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: proc: 0x1078e3e5b
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: upp: 0x1078e3e5b
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: InstallEventLoopTimer: 0x7fff898b10de
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: GetMainEventLoop: 0x7fff89872861
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: Loading /Library/DropboxHelperTools/Dropbox_u501/DropboxBundle.bundle/Contents/MacOS/Dr opboxBundle
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: timer installed!
06/12/11 02:59:27,908 com.apple.Finder: Dropbox: dlopen returned: 0x7ff29bd821b0
06/12/11 02:59:27,908 com.apple.Finder: module initializer in main thread?: 1
06/12/11 02:59:32,294 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 02:59:32,637 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 02:59:33,219 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 02:59:48,648 Mail: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:48,648 [0x0-0x1e01e].com.apple.mail: Mail: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:58,932 LKDCHelper: Starting (uid=501)
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - SessionManager - sessionTerminating
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - SessionManager - DisplayServer stop
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - SessionManager - DisplayServer close
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - GUIAgent - DisplayServerStopped.Sent[243]
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: Session - Error occured:read errno: (9) Bad file descriptor
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - Connection closed
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - Closing DisplayServer
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - DisplayServer close
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - Exiting
06/12/11 03:01:59,168 com.apple.launchd.peruser.501: (com.logmein.logmeinguiagent[243]) Exited with code: 1
06/12/11 03:02:02,557 com.logmein.logmeingui: Determine OS version
06/12/11 03:02:02,557 com.logmein.logmeingui: leopard
06/12/11 03:02:02,557 com.logmein.logmeingui: Executing command:unload -S Aqua /Library/LaunchAgents/com.logmein.logmeinguiagent.plist on launchd with sessiontype::Aqua
06/12/11 03:02:02,557 com.logmein.logmeingui: In session:Aqua
06/12/11 03:02:02,557 com.logmein.logmeingui: Executing command:/bin/launchctl unload -w "/Library/LaunchDaemons/com.logmein.logmeinserver.plist" 2>&1 euid:0 uid:0
06/12/11 03:03:02,059 com.apple.launchd.peruser.501: ([0x0-0x16016].com.getdropbox.dropbox[253]) Exited: Killed: 9
06/12/11 03:03:09,151 com.apple.Finder: Dropbox: Not loading image DropboxBundle because it's already loaded.
06/12/11 03:03:10,249 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:03:10,536 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:03:29,189 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:35,292 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
06/12/11 03:03:47,755 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:47,755 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:48,000 kernel: nstat_lookup_entry failed: 2
06/12/11 03:03:49,964 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:49,965 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:50,445 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:50,445 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:51,439 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:51,439 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:51,849 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:51,849 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:52,219 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:52,219 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:52,816 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:52,816 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:53,882 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:53,882 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:01,187 Microsoft AutoUpdate: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:04:01,826 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:01,826 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:06,039 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:06,040 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:06,907 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:06,907 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:07,304 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:07,304 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:07,311 Microsoft Outlook: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:04:08,028 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:08,028 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:08,526 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:08,527 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:09,055 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:09,055 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:15,917 Mail: -[POP3Connection fetchMessages:totalBytes:] failed: Error Domain=NSPOSIXErrorDomain Code=54 "Échec de la tentative d’envoi de données vers le serveur « (null) »." UserInfo=0x7f8b2951df10 {NSLocalizedDescription=Échec de la tentative d’envoi de données vers le serveur « (null) ».}
06/12/11 03:04:23,226 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:24,030 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:24,215 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:24,978 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:24,980 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:24,980 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:25,070 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:25,372 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:25,523 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/oab.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:25,540 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:26,536 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/oab.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:26,946 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:27,853 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/oab.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:28,034 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:28,802 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,000 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-26.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,000 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-26.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,047 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,167 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,434 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,558 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,558 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,914 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-25.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,914 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-25.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:30,684 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:30,685 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:30,878 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:30,900 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:31,098 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-24.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:31,098 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-24.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:31,123 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:42,094 Safari: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 03:04:42,094 [0x0-0x24024].com.apple.Safari: Safari: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 03:05:00,000 kernel: nstat_lookup_entry failed: 2
06/12/11 03:05:04,207 com.apple.launchd.peruser.0: Background: Bug: launchd_core_logic.c:3059 (25247):3
06/12/11 03:05:04,207 com.apple.launchd.peruser.0: Background: job_mig_intran() was confused by PID 388 UID 0 EUID 0 Mach Port 0x1a07:
06/12/11 03:05:04,207 com.apple.launchd.peruser.0: Bug: launchd_core_logic.c:8610 (25247):3: j != NULL
06/12/11 03:05:10,381 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:10,527 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:10,960 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-23.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:10,960 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-23.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:11,237 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:11,372 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:13,629 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:13,630 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:15,156 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:15,245 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:15,347 Microsoft Outlook: CFURLCreateWithBytes wAfter biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it. -
Time Machine backups only work after restart
Hi
Getting frustrated as Time Machine backups only work after a restart. Work for a few hours and then get stuck with Backing up: XXMB of XXGB. I have left it on this for many hours ie overnight without completion
I have a Mid 2014 MBP 13 in running 10.10.2
I backup onto an external USB via a hub.
Things I have tried with review of Pondini great site which has helped with different TM backup problems.
Disk permissions and repair of SSD on MBP (were errors but did not solve issue)
Direct USB connection
Backup via Airport Extreme
Re-index spotlight
Reformat USB disk
New USB disk!
Below is log (backupd filtered) of latest backup attempts including final completed occuring after restart.
Any help gratefully received
19/03/2015 12:59:07.730 pm
com.apple.prefs.backup.remoteservice[2916]
Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
19/03/2015 12:59:10.238 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) Unknown key for Boolean: ForceEnableHack
19/03/2015 12:59:10.240 pm
UserEventAgent[16]
com.apple.backupd-auto launchd job enabled
19/03/2015 12:59:10.238 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 12:59:10.239 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
19/03/2015 12:59:23.162 pm
com.apple.backupd[2929]
Starting manual backup
19/03/2015 12:59:23.358 pm
com.apple.backupd[2929]
Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
19/03/2015 1:01:55.000 pm
kernel[0]
process backupd[2929] thread 893245 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
19/03/2015 1:12:00.297 pm
com.apple.backupd[2929]
Will copy (Zero KB) from Macintosh HD
19/03/2015 1:12:00.350 pm
com.apple.backupd[2929]
Found 221479 files (439.9 MB) needing backup
19/03/2015 1:12:01.050 pm
com.apple.backupd[2929]
2.33 GB required (including padding), 554.92 GB available
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
19/03/2015 1:21:51.062 pm
com.apple.backupd[167]
Starting manual backup
19/03/2015 1:21:51.380 pm
com.apple.backupd[167]
Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
19/03/2015 1:24:40.000 pm
kernel[0]
process backupd[167] thread 7580 caught burning CPU! It used more than 50% CPU (Actual recent usage: 53%) over 180 seconds. thread lifetime cpu usage 90.616005 seconds, (29.940993 user, 60.675012 system) ledger info: balance: 90000913400 credit: 90000913400 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 169146762635
19/03/2015 1:24:40.821 pm
spindump[507]
Saved cpu_resource.diag report for backupd version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2015-03-19-132440_David-Henshaw-Work-Ma cbook.cpu_resource.diag
19/03/2015 1:34:29.100 pm
com.apple.backupd[167]
Will copy (Zero KB) from Macintosh HD
19/03/2015 1:34:29.155 pm
com.apple.backupd[167]
Found 221268 files (493.5 MB) needing backup
19/03/2015 1:34:29.235 pm
com.apple.backupd[167]
2.39 GB required (including padding), 554.92 GB available
19/03/2015 1:35:57.393 pm
com.apple.backupd[167]
Copied 5145 items (486.8 MB) from volume Macintosh HD. Linked 21319.
19/03/2015 1:36:33.451 pm
com.apple.backupd[167]
Created new backup: 2015-03-19-133632
19/03/2015 1:36:39.933 pm
com.apple.backupd[167]
Starting post-backup thinning
19/03/2015 1:36:39.943 pm
com.apple.backupd[167]
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/2AC908D9-122D-4267-9652-74A9DC6C8795
19/03/2015 1:36:39.944 pm
com.apple.backupd[167]
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/A01A1A4C-F424-4F99-9466-6A5F571CE4F5
19/03/2015 1:36:53.268 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-125436 (10.4 MB)
19/03/2015 1:37:05.844 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-115428 (20.6 MB)
19/03/2015 1:37:12.476 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-102131 (1.5 MB)
19/03/2015 1:37:12.476 pm
com.apple.backupd[167]
Post-backup thinning complete: 3 expired backups removed
19/03/2015 1:37:12.495 pm
com.apple.backupd[167]
Backup completed successfully.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1295 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 450 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n ...and %s more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0; };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
After rebooting:Listener Refused the connection:ORA12519
Hi There,
Let me brief you first how this prob arises:
I had run RCU for creating database schemas ......for that i have change my system processes to 300 to run RCU properly....
IT worked fine but after rebooting my system...when i try to connect the db thru sqldeveloper... i am getting the error"Listener Refused the connection:ORA12519,TNS no appropriate service handler"......for which i have consulted the
ORA-12519 using thin JDBC client this forum one of the post suggested that change process to 150....
Now i have three points:
1.Can i also alter my system processes to make it work fine...?
2.Currently as i am trying to connect thru JDev it is throwing me an exception " Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor"... I guess this prob is due to aforesaid issue and it will work once the instance is up.....
3.I have shutdown and startup my DB in cmd and it gives me message database mounted and opened .......does it means that db is working fine but still it wont be able to connected coz of process...
Vivekkonnecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "ProdDBXDB" has 1 instance(s).
Instance "proddb", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: 01HW191334, pid: 4552>
(ADDRESS=(PROTOCOL=tcp)(HOST=01HW191334.India.TCS.com)(PORT=63127))
Service "orcl.India.TCS.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "orclXDB.India.TCS.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: 01HW191334, pid: 2608>
(ADDRESS=(PROTOCOL=tcp)(HOST=01HW191334.India.TCS.com)(PORT=59766))
Service "proddb" has 1 instance(s).
Instance "proddb", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "testdb" has 1 instance(s).
Instance "testdb", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "testdbXDB" has 1 instance(s).
Instance "testdb", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: 01HW191334, pid: 2600>
(ADDRESS=(PROTOCOL=tcp)(HOST=01HW191334.India.TCS.com)(PORT=59765))
The command completed successfully
One More Thing Niket ....when i try to connect my DB thru SQLDEVELOPER i get a different error
"Listener Refused the connection with following error:ORA-12519,TNS:no appropriate service handler found"...the desc of which i have written as a part of ques? -
Error trying to Restart Application Tier after reboot adstrtal.sh
After Upgrading my environment from EBS 12.1.1 to 12.1.3 on Linus 64 I am trying to start up the Application tier after rebooting my server and I am getting the following error
"adstrtal.sh: Database connection could not be established: Either the database is down the the APPS credentials supplier are wrong"
I though that this may be due to the database listener not being started but it appears to be running as show below.
The Steps that I have taken are
1. Starting up database
2. ran sh.adstrtal.sh apps/apps
Any Suggestions would be greatly appreciated
[root@vintoracle scripts]# lsnrctl status
LSNRCTL for Linux: Version 10.1.0.5.0 - Production on 19-MAR-2012 10:22:11
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.5.0 - Production
Start Date 19-MAR-2012 10:04:19
Uptime 0 days 0 hr. 17 min. 52 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /d01/oracle/VIS/inst/apps/VIS_vintoracle/ora/10.1.2/network/admin/listener.ora
Listener Log File /d01/oracle/VIS/apps/tech_st/10.1.2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vintoracle.domain.int)(PORT=1521)))
The listener supports no services
The command completed successfully
Edited by: 917901 on Mar 19, 2012 7:21 AMHi,
I did some testing and while I was able to connect to SQL plus with the "oracle" user I was unable to connect using the ""applmgr" user. When I try to conenct as the applmgr user I get an error ORA-12547: TNS:lost contact.
Could this be why I am seeing the database connection related error when running adstrtal.sh and if so any suggestions on how to resolved would be greatly appreciated
{code}
Do you have enough resources on this machine?
For application, you have to source environment file from APPL_TOP. So are you sourcing the correct env file.
Do you see any errors in the listener log file, db alert log file?
Was you upgrade from 12.1.1 to 12.1.3 successful?, Did you get any errors while upgrading.
Thanks -
Cannot start the db after reboot
Hi,
Oracle DB: 10.2.0
OS: RHEL5
Successfully installed db and created the database.
but after reboot of machine I cannot start the database.
I have tried all the possible means( i deleted the listener and tns, recreated again rebooted etc etc)
oracle@med ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 5 13:48:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
ERROR:
ORA-12162: TNS:net service name is incorrectly specified
SQL> conn sys/pwd@rmct as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Thanking you,
regards,By definition your installation was not successful.
What network were you connected to when you installed the database?
After you rebooted are you still connected to the same network?
Has the IP Address changed?
How is "HOST" defined in your listener.ora tnsnames.ora files?
Oracle 10g dot anything is currently in desupport mode. It would be far better to install 11gR2 at this point in time. -
SNMPv3 config changing after reboot
Whenever one of my C2960's reboot, our Solarwinds monitoring stops working. I found that this is due to one line of SNMPv3 config changing by itself. This used to be in the config:
snmp-server group XXX v3 priv access permit-snmp
(permit-snmp being the access-list defining ip addresses allowed to query) After the reboot, snmpv3 stops working and this line shows up in the config instead of the one above:
snmp-server group XXX v3 priv notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF7F
Is this a bug? (I did check the bug database, without success.) I have upgraded the IOS to 12.2(53) SE2 without any success. The switch is a C2960-24TC-L.I had the same problem and believe the issue is that you probably have a trap server configured and are using the same snmp-server group for the trap server and your queries. I created another group for SNMPv3 queries and the configuration no longer seems to get overwritten. Here's what I did.
Go into config mode and create a group just for the trap server - let's call it TRAPS. I used priv and it looks like that's what you use. Don't worry about defining any MIB views as this group will automatically populate the notifyview once the trap servers below are added to the config. (...and will remove the readview and writeview entries after reboot - that's why a second group is needed). Remove your old trap server entries and set up the new trap server using the new group called TRAPS.
snmp-server group TRAPS v3 priv
snmp-server host version 3 priv TRAPS
Now create another group for queries only - (let's call it QUERIES but you could just use your current group XXX since it's already set up) - I like the v1default MIB view for both reads and writes but you can limit the MIBs with the snmp-server view command. I am using md5 and des56 here - your case may be different - and set up the user (or keep the one you already have configured)
snmp-server group QUERIES v3 priv read v1default write v1default access
snmp-server user QUERIES v3 auth md5 priv des56
Exit and check the config.
The group TRAPS should have the notifyview set. The group QUERIES should have the readview and writeview set to v1default (or whatever view you chose to enter here). The two SNMPv3 groups should look like this:
#sh snmp group
groupname: TRAPS security model:v3 priv
readview : writeview:
notifyview: *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.F
row status: active
groupname: QUERIES security model:v3 priv
readview : v1default writeview: v1default
notifyview:
row status: active access-list: 4
The old trap server entry using the old group XXX should have been removed already. Verify that the user: entry says TRAPS
#sh snmp host
Notification host: xxx.xxx.xxx.xxx udp-port: 162 type: trap
user: TRAPS security model: v3 priv
Finally make sure the user is in the correct group (QUERIES):
#sh snmp user
User name:
Engine ID: xxxxxxxxxxxxxxxxxxxxxxxxxx
storage-type: nonvolatile active
Authentication Protocol: MD5
Privacy Protocol: DES
Group-name: QUERIES
If all is well - write the config. You should now be able to perform a coldstart without losing your SNMPv3 config.
Please, let me know if this worked for you. -
SCVMM Service (2012) does not start after reboot VMM-Server
VMM-Server: WIN 2008 R2 Standard x64
SQL-Server: 2008 R2 x64
Hi,
after reboot VMM-Server we get the following error messages from the EventViewer when starting the VMM-service:
Event ID: 19999
Virtual Machine Manager (vmmservice:130936) has encountered an error and needed to exit the process. Windows generated an error report with the following parameters:
Event:VMM20
P1(appName):vmmservice
P2(appVersion):3.0.6005.0
P3(assemblyName):Remoting
P4(assemblyVer):3.0.6019.0
P5(methodName):M.V.R.IndigoSerializableObject.BuildKnownAssemblyTypes
P6(exceptionType):S.Reflection.ReflectionTypeLoadException
P7(callstackHash):17ca
and
Event ID: 1
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
at System.Reflection.Module._GetTypesInternal(StackCrawlMark& stackMark)
at System.Reflection.Assembly.GetTypes()
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)-2146232830
Thanks in advance!You would have to post the same in the XI forums for more relevant answers.
Please close this thread and open a new on in the XI forums or send a mail to
[email protected]
tp have it moved.
Maybe you are looking for
-
Calling web service from MBean weblogic cannot find type mapping file
When calling web service from custom MBean i get java.io.IOException. java.io.IOException: unable to find the type mapping resource file for: net.msl.sfx.ebooking.client.BookingPartiesServiceService at weblogic.webservice.core.encoding.DefaultRegistr
-
How to Install Oracle Data Access Components (ODAC) on Windows Server 2003?
I recently installed "32-bit Oracle Data Access Components (ODAC) with Oracle Developer Tools for Visual Studio" on my computer (Windows 7, 64bit). Everything seems fine and I can develop and run my application in Visual Studio 2010 and IIS 7. Now, w
-
Flash Player and Browser Communication
According to this article: http://blog.dannypatterson.com/?p=133 Compressed data (gzip files) being sent from the server are unzipped by the browser before being passed to Flash Player - therefore there is no need to write separate action script clas
-
Table name in which function module and function group store
Hai, Any one help me, What is the table name, the function modules and fouction groups are stored. Thanks, Elamaran
-
Can't get this one site to work in IE8
I'm convinced I have the current version of Flash working properly - IE8 reports Flash Shockwave Object 10.2.153.1 , Shockwave ActiveX Control 11.5.9.620 and the Adobe test page seems to confirms this. All seems fine with all other sites, but there s