Embedded objects do not scale on high-dpi displays

I am using a new Lenovo Yoga 2 Pro laptop with a 3200 x 1800 display. Though in general the high-DPI scaling works to keep text sharp for most webpages (something that cannot be said for Chrome or Opera), Flash does not scale with the rest of the website. For example, when I watch a Youtube video, the text, objects, etc. scale appropriately, but the buttons for the flash player are very small.
https://dl.dropboxusercontent.com/u/30375975/youtube_screenshot_problem.png

Does this occur with all flash content?
Please consider contacting the Adobe support team about this issue.<br>
I think that maybe Flash Player is not compatible with this high screen resolution.

Similar Messages

Intermittent bug in Touchpad One-Finger Scrolling with High-DPI display scaling

This one is quite strange (since it does not happen all the time) but very annoying - on my T420s (with 1600x900 screen) I am using 150% DPI scaling in Windows7 (Pro x64). Ultranav driver is 16.2.5.0.
I am using the preinstalled Chrome browser in a rather default configuration - and by default that program declares itself not High-DPI-aware and gets scaled up by desktop composition - something that can be changed in the properties from the compatibility tab, but which I keep like that since there are sites that look better this way!
Long story short - touchpad scrolling fails to work in more than 50% of the cases in that specific Chrome setup in a way that strongly suggests it is a bug where the touchpad scrolling program fails to account for the fact that Chrome runs "scaled-up" - if Chrome is maximized and the mouse is positioned in the top half AND left-half of the screen scrolling works as expected, HOWEVER when the mouse pointer is positioned (still 100% over the Chrome window) towards the right/bottom extremes scrolling fails and the Ultranav driver seems to send the scrolling messages to some other window than Chrome! (since it seems to fail to take into account the 150% scaling - so it gets wrong values with GetWindowRect and should probably use instead stuff like DwmGetWindowAttribute(hWnd, DWMWA_EXTENDED_FRAME_BOUNDS...))!
Steps to repeat the bug:
- Windows 7 machine, large-resolution screen with Custom DPI text size set to 150% and the older XP-style scaling disable (which enables the new DWM scaling)
- Chrome browser in default mode (which will use scaling); to repeat things easily the window should be maximized and the URL should be set to some long page on which scrolling can be performed
- scrolling should be enabled in Touchpad settings (I do not normally use ChiraMotion, but I do not think it makes a difference)
- mouse pointer should be positioned in the right-most 10% of the window and Touchpad One-Finger Scrolling should be attempted;
- in many/most cases the scrolling messages are sent to some other window beneath Chrome (but NOT always, so it seems there might be another factor in play)
- it is interesting that the different TrackPoint scrolling seems to work even in those conditions.

You won't get a response from Adobe in these user-to-user forums but you will be heard if you post your frustration via the official bug report form:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Don't expect a formal personal reply though.

Creating Icons/Graphics for High DPI Displays, naming and sizing

I'm having to create and deliver graphics and icons for a native desktop windows applications that must support Windows 8.1 and variety of screen resolutions which ranges from standard resolution monitors to new 4k high density displays.
Typically for iOS you would deliver an icon using the following size and naming convention to support both standard and Retina 2x devices.
Standard Resolution
Icon-72.png (actual size 72x72 pixels)
Retina Display
[email protected] (actual size 144x144 pixels)
For Android on a 4k device, you might do the following:
[email protected] (actual size 288x288 pixels)
My question is would you also follow this same naming and sizing convention for native Windows 8.1 desktop apps? I'm assuming you would, but I'm getting some pushback.
This is slightly new territory in Windows desktop, but I'm hoping there may be a few who have experience and offer there suggestions.
Thank you and best regards,

You will probably get better feedback in the forum for the picture program you are using... what is that program? (Photoshop?)

Palette & Panel (UI) size adjustment for High DPI display?

Hello,
I just got a nice new Dell XPS laptop with a super high resolution screen (3200x1800), similar to Apple's retina display. I thought it would be great for editing photos on the go. Unfortunately all the user interface elements of Light Room (panels, palettes, menus, etc.) are tiny. They're so small I can barely see them. Is it possible to adjust their size? The only solution I've found is to change the display settings to reduce the resolution to that of a normal monitor, which defeats the purpose. Please tell me their is a way to fix this.
I'm running Lightroom 4.4 on Windos 8. Would be glad to upgrade to LR 5 if I knew that would fix it.
Thanks,
Paul

You will probably get better feedback in the forum for the picture program you are using... what is that program? (Photoshop?)

Where is high DPI display support?

Trust me, it is right time to have it.Skype is pretty much useless on my Win8 desktop

Running version 6.18.  Another vote here to have this fixed. I've included some screenshots to try show just how bad this is! All the image are NOT scaled. About Skype:
   Menu and toolbar (note the poor quality of text):   Dial-pad (it's barely legible):  The application and advertising (note how sharp explorer and chrome are):  Finally, the system tray icon (spotify also has this issue):
  Please put a dev on this; hell, I'll pay for the coffee.

Is there support yet for PC high DPI displays? I see there is support for Apple....

Have been a user of Photoshop Elements for many years. Presently have version 12, which is unusable on my Dell XPS 15" with 4K Ultra HD display. I found a statement somewhere on Adobe's site that there is support for HiDPI displays from Apple, but no mention of Windows machines. Scaling, changing resolution, etc. doesn't help - the icons are tiny and can't be seen by my eyes without squinting or a magnifying glass. I don't want to switch programs but will if support isn't there for displays like mine that are more common every day.....

Yes, in PSE 13 but definitely do the trial first to see if it works well for your display.

Make Skype work properly with Windows DPI scaling for high resolution displays

Hello, As of now, Skype does not work well with Windows DPI scaling. Everything looks fuzzy (fonts, icons, etc).Microsoft's recommendation is to turn off the DPI scaling ( http://support.microsoft.com/kb/2900023 ) but in this case, the text is too tiny to be read. Basically everyone with a high resolution display is stuck with either tiny of fuzzy fonts, making Skype unusable. It's really a pity because other Microsoft programs such as Office work perfectly with Windows DPI scaling, and Skype also looks great on Mac with Retina display. With high DPI displays becoming more and more common, this is a must have feature. Thanks for reading!

pokegwa wrote:
Hello, As of now, Skype does not work well with Windows DPI scaling. Everything looks fuzzy (fonts, icons, etc).Microsoft's recommendation is to turn off the DPI scaling ( http://support.microsoft.com/kb/2900023 ) but in this case, the text is too tiny to be read. Basically everyone with a high resolution display is stuck with either tiny of fuzzy fonts, making Skype unusable. It's really a pity because other Microsoft programs such as Office work perfectly with Windows DPI scaling, and Skype also looks great on Mac with Retina display. With high DPI displays becoming more and more common, this is a must have feature. Thanks for reading!It's been two years actually. As you can see Skype is really broken on HDPI displays and the issue is still being ignored/unacknowledged by Skype devs.

Right side menu too small font size of letters in Windows 8.1 High DPI screen

Hi, I just own a new laptop with Windows 8.1 and high resolution screen.
When I start Adobe Reader, the document area seems to be readable, with "normal size fonts", but the options menú in the right side uses a very small fonts size and is hardly readable.
I tried to change it using the Windows "change menu, title, icons size, but withpout success.
Any solution for it?
By the way, in a Lenovo Ideapad U430 Touch, there is not "magnyfying glass" combination key and the zoom function of the touch screen doesn't work either in that right side menu área (it works in the document area, not in the right side menu area).
Any help will be welcomed.
Thanks.
Javier

Hi, Pat, test done.
Thanks for your suggestion, it was somehow helpful, or, let say, half and half.
It was helpful in the way that when I opened the preferences Windows I was not able to see the full window, there was a part of the right side of the window that was out of the screen. So, when I changed the "scaling settings options and behaviour" from "Auto" (default value) to 100% everything was in the display.... So, this was of high help.
BUT I was not able to find any way in all the suggested document for making the fonts used in the right window of the Adobe Reader, the one where the "Tools" and "Comments" menus are displayed more readable, bigger size, than the one that the product uses by default in the High DPI display.
So, thanks for the suggested document that helped to solve the first point.
BUT
Any other idea that could help for changing the fonts used in the "Tools" or "Comments" menu window?
Thanks and kind regards.
Javier

Userform controls disappearing in Word 2013/Windows 8.1 with High-Res display - DLL error?

I have a .dotm file with a large number of modules and userforms. Creating new documents from the template works fine on almost every computer I've tested it on (hundreds), but I've run into a setup that fails consistently.
Two different Samsung ATIV 9's with a high res display and Windows 8 (64bit)/Office 2013 show the same problem:
When opening a new document based on the template for the first time, it works fine. If I open the VB editor, everything looks normal, userforms are intact.
On the second and all consecutive attempts, it throws a "Type Mismatch" error. Opening the VB Editor, I get a compile error on lines of code referencing components of the first userform (alphabetically). Opening that userform, it shows only a blank
multi-page control, and all the other controls are missing - hence the new compile errors on controls that used to exist. If I remove that userform and save the file, the project compiles, but opening a new document from the template will result in "Word
has stopped working..."
I can actually reproduce this behavior starting from scratch - new blank document, save as a .dotm. Create a new userform and add a multipage control. Clicking any control in the toolbox to add it to the form will result in a "Type Mismatch" error,
even though there's no VBA code. I can then successfully add the control to the form. But, once I save and reopen the template, the multi-page control is blank, and the other controls I put on it disappear.
I at one point got an error from the VB Editor that it "could not open macro storage" and the included help suggested that might be due to an incorrect version of vbe7.dll.
The only copy of vbe7.dll I could find was at:
c:\Program Files\Microsoft Office 15\root\vfs\ProgramFilesCommonX86\Microsoft Shared\VBA\VBA7.1
The dll version was 7.1.10.44
I tried replacing that file with a vbe7.dll file from a working computer (version 7.0.15.89 from c:\Program Files (x86)\Common Files\microsoft shared\VBA\VBA7), but that just resulted in the VB editor not loading at all.
I have tried both a 32bit Click-to-run version of Office 2013, and installing off a CD with 64bit Office 2013, both had exactly the same error.
The reason I'm wondering if it's a high-DPI display related error is that googling about vbe7.dll errors, I came across this hotfix:
http://support.microsoft.com/kb/2880496/en-us
which claims it "Fixes various Visual Basic for Applications (VBA) issues with displays on high-DPI devices."
Neither the 32bit or 64bit installer for that hotfix would run, they said there was no affected programs installed.
My reasoning for suspecting a hardware/DLL incompatibility is this:
1) It's not the template or the VBA code, since those work elsewhere and the same behavior happens with any file with a userform
2) It's not the Office version, since both 32/64 bit, MSI and Click-to-run didn't work
3) It's not Windows 8.1, since this same template works fine on other machines
4) The first time I open the template on the affected machines, it works fine - but the template is shipped compacted and decompiled. After I open it once and then close, Word has compiled the code and corrupted it somehow, because whatever the first userform
was in the list shows up as blank.
5) It feels hardware-specific, since out of hundreds of machines, I've only seen this behavior on two of the same laptop model - seems like too much of a coincidence.
Is there any chance the VBE in Office 2013 is somehow incompatible with this hardware? If that might be the case, does anyone have any idea how I'd go about testing and/or fixing it?
Any thoughts are much appreciated.

Hi Chris,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59861.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. If you see an entry for IDT HD Audio ( or very similar IDT entry ), right click the device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall. If there was no IDT entry, just proceed below.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows not scaling dpiAware programs correctly on high DPI screens

I just upgraded to a new notebook with a high dpi screen (3200x1800)..
In the standard desktop (not modern), several programs do not display correctly- specifically Adobe programs, Sony Vegas, Sorenson Squeeze, etc..
The type and fonts for the menus etc are scaled properly, but the UI icons are extremely tiny.
See here.. The red boxed areas are what size the icons SHOULD be:
http://tinypic.com/r/nb82l5/8
If I edit the manifest for each .exe and change
dpiAware to FALSE, everything scales fine but is blurry (sections inside red box from link above)
If dpiAware is already true in the program, why isn't windows scaling the program interface icons correctly?

Hi,
Please check and uncheck the following option to see the result.
Also,please use a external display device to test it.
Regards,
Kelvin Xu
TechNet Community Support

High DPI External Display not Working on OS X

I am developing a new monitor using high DPI laptop displays and it seems to work on every OS except OS X. And it even works on apple hardware running linux.
I get no signal at all when using it with either 10.8.5 or 10.9 using a rMBP 13" (Ivy Bridge). However, in both instances, it does detect something is plugged in, as the laptop display turns blue for a second. Also, on 10.9, it actually logs me out of my session. But I have the feeling this is just a bug in the new OS.
After plugging it in, there are no options for the display under the "displays" pref pane or with any other display-related programs such as SwichResX. However, using ioreg, I see that it is detecting the panel and it does report the correct edid.
I tried both thunderbolt ports and had the same problem. I think it's an OS issue and not a hardware issue since one of my project partners tried on a different model mac, and couldn't get it to work with OS X but it worked when he booted to windows. I also got it working with Ubuntu installed on my laptop
Below are some console logs from when I connected and disconnected the panel. Clearly something funny is going on since it seems to detect the screen at 1x1 and "Fatal error remapping framebuffer" sounds pretty bad...
I tried to do something like what's mentioned here, but to no avail:
http://www.insanelymac.com/forum/topic/208410-fixing-scrambledstretched-or-wrong -resolution-laptop-display-problems/
Any help would be greatly appreciated. Thanks. Logs below if you want more details.
Here are the logs:
When connecting:
10/26/13 12:23:51.309 AM WindowServer[86]: Received display connect changed for display 0x42804c0
10/26/13 12:23:51.346 AM WindowServer[86]: Created shield window 0x81f for display 0x042804c0
10/26/13 12:23:51.346 AM WindowServer[86]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
10/26/13 12:23:51.347 AM WindowServer[86]: Received display connect changed for display 0x3f003d
10/26/13 12:23:51.347 AM WindowServer[86]: Received display connect changed for display 0x3f003e
10/26/13 12:23:51.347 AM WindowServer[86]: Received display connect changed for display 0x3f003f
10/26/13 12:23:51.348 AM WindowServer[86]: _MPCompleteConnectChange: Fatal error remapping framebuffer
10/26/13 12:23:51.672 AM WindowServer[86]: Display 0x042804c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 25 modes available
Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model a013, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a01300000000042804c0, ColorProfile { 2, "Color LCD"}
10/26/13 12:23:51.672 AM WindowServer[86]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x000044bb, unit 0, caps QEX|QGL|MIPMAP, vram 1444 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
10/26/13 12:23:51.672 AM WindowServer[86]: Display 0x003f003f: GL mask 0x8; bounds (2304, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
10/26/13 12:23:51.672 AM WindowServer[86]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
10/26/13 12:23:51.672 AM WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
10/26/13 12:23:51.991 AM WindowServer[86]: Created shield window 0x820 for display 0x042804c0
10/26/13 12:23:51.992 AM WindowServer[86]: Created shield window 0x821 for display 0x003f003f
10/26/13 12:23:51.992 AM WindowServer[86]: Created shield window 0x822 for display 0x003f003e
10/26/13 12:23:51.992 AM WindowServer[86]: Created shield window 0x823 for display 0x003f003d
10/26/13 12:23:51.995 AM WindowServer[86]: Display 0x042804c0: MappedDisplay Unit 0: Startup Mode 1280 x 800, CGSThirtytwoBitColor, Resolution 2, IOMode 0x80000000, IODepth 0x0, IOReturn 0x0
10/26/13 12:23:51.995 AM WindowServer[86]: Display added
10/26/13 12:23:51.996 AM WindowServer[86]: Display removed
10/26/13 12:23:51.998 AM WindowServer[86]: Display 0x042804c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 25 modes available
Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model a013, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a01300000000042804c0, ColorProfile { 2, "Color LCD"}
10/26/13 12:23:51.998 AM WindowServer[86]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x000044bb, unit 0, caps QEX|QGL|MIPMAP, vram 1444 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
10/26/13 12:23:51.998 AM WindowServer[86]: Display 0x003f003f: GL mask 0x8; bounds (2304, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
10/26/13 12:23:51.998 AM WindowServer[86]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
10/26/13 12:23:51.999 AM WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
10/26/13 12:23:52.016 AM WindowServer[86]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042804c0 device: 0x103121b90 isBackBuffered: 1 numComp: 3 numDisp: 3
10/26/13 12:23:53.347 AM WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
10/26/13 12:23:53.380 AM WindowServer[86]: Display 0x042804c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/26/13 12:23:53.397 AM WindowServer[86]: Display 0x042804c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/26/13 12:23:53.996 AM WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
10/26/13 12:23:54.026 AM WindowServer[86]: Display 0x042804c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/26/13 12:23:54.043 AM WindowServer[86]: Display 0x042804c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
When disconnecting:
10/26/13 12:22:53.104 AM WindowServer[86]: Received display connect changed for display 0x42804c0
10/26/13 12:22:53.121 AM WindowServer[86]: Created shield window 0x80e for display 0x042804c0
10/26/13 12:22:53.121 AM WindowServer[86]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
10/26/13 12:22:53.121 AM WindowServer[86]: Received display connect changed for display 0x3f003d
10/26/13 12:22:53.121 AM WindowServer[86]: Received display connect changed for display 0x3f003e
10/26/13 12:22:53.122 AM WindowServer[86]: Received display connect changed for display 0x3f003f
10/26/13 12:22:53.382 AM WindowServer[86]: Display 0x042804c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 25 modes available
Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model a013, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a01300000000042804c0, ColorProfile { 2, "Color LCD"}
10/26/13 12:22:53.383 AM WindowServer[86]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x000044bb, unit 0, caps QEX|QGL|MIPMAP, vram 1444 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
10/26/13 12:22:53.383 AM WindowServer[86]: Display 0x003f003f: GL mask 0x8; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
10/26/13 12:22:53.383 AM WindowServer[86]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
10/26/13 12:22:53.383 AM WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
10/26/13 12:22:53.697 AM WindowServer[86]: Created shield window 0x80f for display 0x042804c0
10/26/13 12:22:53.697 AM WindowServer[86]: Created shield window 0x810 for display 0x003f003f
10/26/13 12:22:53.698 AM WindowServer[86]: Created shield window 0x811 for display 0x003f003e
10/26/13 12:22:53.698 AM WindowServer[86]: Created shield window 0x812 for display 0x003f003d
10/26/13 12:22:53.701 AM WindowServer[86]: Display 0x042804c0: MappedDisplay Unit 0: Startup Mode 1280 x 800, CGSThirtytwoBitColor, Resolution 2, IOMode 0x80001000, IODepth 0x0, IOReturn 0x0
10/26/13 12:22:53.701 AM WindowServer[86]: Display added
10/26/13 12:22:53.702 AM WindowServer[86]: Display removed
10/26/13 12:22:53.704 AM WindowServer[86]: Display 0x042804c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 25 modes available
Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model a013, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a01300000000042804c0, ColorProfile { 2, "Color LCD"}
10/26/13 12:22:53.704 AM WindowServer[86]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x000044bb, unit 0, caps QEX|QGL|MIPMAP, vram 1444 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
10/26/13 12:22:53.704 AM WindowServer[86]: Display 0x003f003f: GL mask 0x8; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
10/26/13 12:22:53.704 AM WindowServer[86]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
10/26/13 12:22:53.705 AM WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
10/26/13 12:22:53.713 AM WindowServer[86]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042804c0 device: 0x103121b90 isBackBuffered: 1 numComp: 3 numDisp: 3
10/26/13 12:22:55.121 AM WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
10/26/13 12:22:55.152 AM WindowServer[86]: Display 0x042804c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/26/13 12:22:55.168 AM WindowServer[86]: Display 0x042804c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/26/13 12:22:55.706 AM WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
10/26/13 12:22:55.737 AM WindowServer[86]: Display 0x042804c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/26/13 12:22:55.754 AM WindowServer[86]: Display 0x042804c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)

Don't call the Apple Store, call AppleCare. You have 90 days of free phone support so you may as well use it. The number is in your owners manual.

Embedded application/x-shockwave-flash objects will not display

4.0b9 on Windows XP
I just get a white section where a shockwave flash object should be, and in all the occurences I've found it's when the flash object is embedded. Youtube works just fine, though...
In the "white section" I can right-click and get the options for Adobe Flash Player 10, but I cannot actually choose any of the menu options.
In some cases, I can choose to display the flash object in another tab, and then it works just fine. Typically an embedded youtube movie clip acts like that that, but not always.
In an example, I see only a white section where the shockwave flash object should be visible in Pichfork TV - http://pitchfork.com/tv/
When I open the page information, in the media section, list of URL's, I find an URL that is both grey and italic, and describes this URL as type Embedded:
URL - http://pitchfork-cdn.s3.amazonaws.com/player/DelveMoviePlayer.swf
Type - application/x-shockwave-flash
I assume this URL is grey and italic because it is not loaded or opened in the pitchfork TV site.
This is the same problem with most embedded flash objects, and I really hope someone can help me! I've browsed aroud the support forums and tried a lot of different tips, but to no avail.
I have of course uninstalled and reinstalled both flash player and shockwave from adobe's site, and made sure it's not the active-x version for IE that's installed.
My add-in manager claims that Shockwave Flash 10.1 r102 is installed and enabled, and the release is the latest available according to adobe.com.
I have also tried to open FF in secure/private mode, but same problem in both modes.
Just to check, I tried to open this site with IE8, and there it displays correctly (and I also remembered why I don't ever use IE8, haha...), so apparently the active-x part of shockwave/flash works...
BR, Torgeir

OK, so now I've tried again to open FF in safe mode again, but the problem is still unsolved. Same problem in safe mode.
The hardware acceleration in the flash player is set to disabled long before I posted this problem.
I didn't know that Pitchfork had such a special flash player, but the problem is the same on any sites. Just chose Pitchfork because it's an English site. Bad example then...
Here's a better example: NME.com:
http://www.nme.com/musicvideos/my-chemical-romance-sing/832454
Here I only see a white space where the flash object is embedded (if it really IS embedded, I dont't know how these things work). But I can right-click and get the dialog for Adobe Flash Player 10 properties (such as settings and global settings), and if I'm lucky to hit the start button (wich I don't see), the flash object starts playing, and I hear all sound but see no image.
I open the page info menu, and here I find in the list of media URL's the link to the flash object, described as an embedded object in the NME site:
URL: http://www.muzu.tv/player/getPlayer/a/RSFVcmvHJ4/autostart=n&includeAll=y&soundoff=n&vidId=832454&videotype=hq
Type: application/x-shockwave-flash
It's grey and italic in the list of media URL's, and I assume that's because it's not properly loaded.
But if I copy the URL from the media URL list and paste it into the adress field of a new tab, I can both see and hear the flash object without a problem.
This is exactly the same issue with local sites that have embedded web radio stations. Cant see the object, and have to be quite lucky to hit the start button. But by stepping via info for site and copy the URL to the flash object and paste it into a new, empty tab, I can both see and hear whatever was supposed to display in the original site.
Any help would be more than welcome! So many of the sites I use most has embedded flash objects, so if I cannot solve this I have to find another browser. I REALLY don't want to, because otherwise I really love FF...

Can not Scale Objects

Hi folks. I have an odd issue I can't find a solution for (obviously), even searching the forums and google. I can select all objects in my drawing, I can see that the bounding has selected all objects - but I can not scale them.
I'm using Adobe CS3, Mac G5 platform

Don't forget the Scale tool (S). You can use it whether you use bounding boxes or not.
Double-click on the tool or option-click on the scaling origin to get the dialogue window.

Embedded object stripped message

I want to send an html email with an embedded video. I have created a web page on my server with the embedded video object. When i open the webpage in Safari to displays correctly. When I chose email contents of this webpage from Safari it creates an email with the embedded object (video) and the video plays.
When the message is saved (sent or draft) the embedded object is stripped from the message.
Here is the source for the webpage:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 TRANSITIONAL//EN">
<html>
<head>
<title></title>
</head>
<body>
<object width="480" height="378"> <param name="movie" value="http://content.screencast.com/users/Michael_Teel/folders/Default/media/7 5bdd08b-7a5a-4f81-82a3-80fe7d8dcaad/flvplayer.swf"></param> <param name="quality" value="high"></param> <param name="bgcolor" value="#FFFFFF"></param> <param name="flashVars" value="thumb=http://content.screencast.com/users/MichaelTeel/folders/Default/media/75bdd08b-7a5a-4f81-82a3-80fe7d8dcaad/FirstFrame.jpg&w idth=480&height=378&content=http://content.screencast.com/users/MichaelTeel/folders/Default/media/75bdd08b-7a5a-4f81-82a3-80fe7d8dcaad/Jacob-iPhone.m4v "></param> <param name="allowFullScreen" value="true"></param> <param name="scale" value="showall"></param> <param name="allowScriptAccess" value="always"></param> <param name="base" value="http://content.screencast.com/users/Michael_Teel/folders/Default/media/7 5bdd08b-7a5a-4f81-82a3-80fe7d8dcaad/"></param> <embed src="http://content.screencast.com/users/Michael_Teel/folders/Default/media/75b dd08b-7a5a-4f81-82a3-80fe7d8dcaad/flvplayer.swf" quality="high" bgcolor="#FFFFFF" width="480" height="378" type="application/x-shockwave-flash" allowScriptAccess="always" flashVars="thumb=http://content.screencast.com/users/MichaelTeel/folders/Default/media/75bdd08b-7a5a-4f81-82a3-80fe7d8dcaad/FirstFrame.jpg&w idth=480&height=378&content=http://content.screencast.com/users/MichaelTeel/folders/Default/media/75bdd08b-7a5a-4f81-82a3-80fe7d8dcaad/Jacob-iPhone.m4v " allowFullScreen="true" base="http://content.screencast.com/users/Michael_Teel/folders/Default/media/75 bdd08b-7a5a-4f81-82a3-80fe7d8dcaad/" scale="showall"></embed> </object>
</body>
</html>
How can I send this video so that it plays within the email?

What is it about this embedding code that cause mail to reject or strip it out. When I send other web pages that include embedded video content they are not stripped out so it must be something in the code above that Mail doesn't like.
Anyone have a clue?

How do I turn off high DPI scaling in AE CC 2014?

I just downloaded the latest AE update and noticed that all of the screen elements are huge! As a MAX attendee, I understand that this is the high DPI scaling built in for the new high resolution screens. My laptop monitor is fairly high resolution, but the scaled up display looks ridiculous on it. I would love to go back to a 72 DPI display, but do not see an option for that, unlike Photoshop. Is it possible to go back to a non-scaled display?
-Eric

Thanks. Changing the scale to 100% worked, but it made everything else small. Guess that will take some time to get used to.
Any plan to give the user the option to turn on and off the high DPI scaling with PP and AE? Similar to what is being done in PS? That would be my preference.

Embedded objects do not scale on high-dpi displays

Similar Messages

Maybe you are looking for