Embedded pdf in a tab - won't display in ie and crashes Foxfire

http://testtp.trempeprotocol.com/ManagingAging.html
please advise
thank you

I'm sorry but I don't have any problem with the embedded pdf on the managing aging page using FF 3.6.12. I went to managing aging>measuring aging and the embedded PDF showed up fine.
I too would not use an embedded but, as a novice web person, my advice may not be the best. I also tend to embed a gif or jpg instead (as the eye grabber) and have it link to the actual pdf.
For what it's worth (as feedback) I found the .jpg at the top left to be distracting because it looks like the two words overlap. I also noticed that the :hover over the left nav entries has a different height than the non-hover which is also distracting. The speaking engagements link also wraps on hover. Again, not being critical, just some feedback.
Tom

Similar Messages

Why won't my galaxy tab won't display epub format

why won't my galaxy tab won't display epub format

I'm gonna go out on a limb and guess, "Because you haven't installed an epub reader."
Go to the play store and download a reader. I use Aldiko but there are plenty from which to choose.

Embedded PDF on web page fails to display

We have a number of PDFs that are shown embedded in IE (versions vary). This worked fine with Adobe Reader 9.5 but with 10, PDF fails to display.
Page takes a while to report error. Error:
There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (103:103)
I found a few other discussion similar to this in the forum but didn't find a definitive root cause.
In our situation, we found that if the user launching the web page runs Adobe Reader as standalone first, the error doesn't happen.
While workaround exists, I am trying to understand the root cause to see if we can correct this for all the users in automated manner instead of
mandating launching of Reader standalone as a prerequite step. Quite a few users using this web app.
Since launching of Reader standalone works, my guess is that some config/setup is done only after first use. I see that, for example,
reg keys are added under HKCU on first use. I don't know why first use from browser differs from first use from standalone though. Difference in
reg access? Enable/Disable browser plug-in produces different behavior so I don't think the setting is on the browser side. What other factors
may be in play here?
All ideas welcome. Thanks in advance.

Got a couple follow up questions. Postiing the response here.
1. Please send us step by step method on how to recreate the problem, and the URL of the PDF file that shows the issue.
* Write a simple console application that does nothing but starting a browser. Browser URL set to any web site with embedded PDF. I believe I used a sample on Adobe's site for last test.
2. Is everyone in your company experiencing the same issue?
* Yes, everyone can be affected.
3. Does the error show up on any PDF or just the embedded PDF?
* Only embedded.
4. Does the problem occur with Firefox?
* Not browser specific.
5. Do you have any other version of Reader or Acrobat installed on the same system?
* No, clean test box. Tested with 10.0.0 first. Failed. Then cleaned up install and installed 10.1.3. Cannot repro with 9.5.
Root cause appears to be Protected Mode. If I disable that, it works.

Wordpress widget that embeds Twitter feed in blog won't display in Firefox.

The timeline shows up in Chrome, IE and Opera, so the problem isn't with the widget. It's the browser.
What gives?

Any error messages in the Web Console (Firefox/Tools > Web Developer)?
*https://developer.mozilla.org/Tools/Web_Console

IPad app store won't display certain apps, and itunes store won't display any searches at all

Hi. My problem started when instagram won't open bc it says I have an old version, but everytime I checked the "updates" in the app store, instagram doesn't appear. So I deleted it. Now no matter how I search on my iPad for instagram and other certain apps (like 8tracks), they won't appear in the search results! Even when I try to download the apps via the iTunes store, nothing I search on iTunes ever displays. It just loads and stops halfway. I've tried downloading a new iTunes and restoring my iPad but nothing works. Can anyone help me please?

We are all users here, just like you. You can tell Apple about your suggestions by using this link:
Apple - iPod touch - Feedback
New versions of apps might need other hardware requirements and will not work on older devices.

CS5 Won't display video or playback, crashes immediately - ie. is useless

Hi,
Let me start by saying that the rest of the CS5 suite, including After Effects, runs great as in very very well.
I have a quad-core intel processor, a 1gb GeForce graphics card that supports GPU, 6gb of ram and a 1.5tb hard drive running 64bit Windows 7. Way above all the recommended specs. I've also tried installing all the updates, updating every driver and disabling my Realtek soundcard (which I've heard has caused some problems).
But Premiere loads with difficulty, flashing white as if about to crash and prompting me to wait for a response or quit. It then allows me to start projects and new sequences and import footage, but is very tempermental, and if I click to load the footage into the source window or try to drag it onto the timeline, if it doesn't crash immediately, it displays nothing but grey, or sometimes the image of my desktop behind. If I press play or the spacebar it either does nothing or crashes.
I don't believe it's anything to do with my system being unable to handle it, and I don't know what else to try. Can anyone help me? It's pretty much vital I get it to work.
Cheers

>a 1.5tb hard drive
You need at least 2 hard drives, 3 is better... raid for uncompressed HD
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size
- you need AT LEAST 2 drives for video editing, 3 is better
- some HD formats work better with (require) RAID
Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Win7
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Win7 Configuration Article http://windowssecrets.com:80/comp/100218
Win7 Monitor http://windowssecrets.com:80/comp/100304
Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Win7 Virtual XP http://www.microsoft.com/windows/virtual-pc/
More on Virtual XP http://blogs.zdnet.com/microsoft/?p=5607&tag=col1;post-5607
Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346?tstart=0
An Adobe Win7 FAQ http://forums.adobe.com/thread/511916?tstart=0
More Win7 Tips/FAQ http://forums.adobe.com/thread/513640?tstart=0
Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Win7 God Mode http://forums.adobe.com/thread/595255?tstart=0
CS5 Install Error http://forums.adobe.com/thread/629281?tstart=0
CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
Win7 and Firewire http://forums.adobe.com/thread/521842?tstart=0
http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435?tstart=0
http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html

My website page won't display in IE7 and goes wierd in Safari

Hi, I am working on a website( www.katecornish.co.uk ) for somebody. In Firefox the whole website looks fine. In IE the 'Attic 09' page (www.katecornish.co.uk/Attic09.html) does not display at all, I just get a blank page. In Safari this same page displays but the CSS is messed up and the h1 and h2 tags are just big black font rather than the styles I created.
Can anybody help before I give up webdesign forever?
Thanks in advance!
Kate.

Start by fixing your code validation errors. Mostly caused by mismatched code closures and a missing lightbox file.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.katecornish.co.uk%2FAttic09.h tml
http://jigsaw.w3.org/css-validator/validator?profile=css21&warning=0&uri=http%3A%2F%2Fwww. katecornish.co.uk%2FAttic09.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Mail Won't Display Both POP and IMAP Accounts in Inbox

When I set up Leopard Mail I had my two accounts gmail and Comcast set up as POP3 as gmail hadn't enabled imap on my account yet. With imap now enabled I went and switched my gmail account over to imap from pop. The gmail account seems to work fine, but my pop account essentially disappears. Pop3 emails (comcast account) don't appear in the Inbox. However, I can search for them and then they can be found. When I removed the imap account, the pop3 emails appeared back in the inbox exactly how they should be. When I remade the imap account they disappeared again.
I can't see what I am doing wrong, so this looks like a bug. Opinions?
Andy

Okay, it just fixed itself without me doing anything, or even quitting the program again. It still seems like a bug.
Andy

Din font won't display in pdf file since December update to version 11.0.10

I upgraded my Acrobat to version 11.0.10 just before the Christmas break. Din font is my corporate typeface and I used it yesterday to create an invoice in Mac Pages only to discover that I cannot view the pdf as the font won't display in Acrobat. And to add to the problem my clients who are using the same version of Acrobat are unable to view the font either on the pdf. It all worked fine before the upgrade.
What can be done to rectify the problem? I need to fix this asap.
This error message appears when I try and open the file "Cannot extract the embedded font 'DQPJNL+DIN-Medium'. S"
The DQPJNL bit changes depending on the file being opened but essential Din font won't display.

Hi,
Please check if DIN font is embedded in your PDF by going to File > Properties > Fonts
If no, then you might need to go to 'Tools > Print Production > Preflight'
Then, open the PDF fixups section, click on Embed fonts fixup and choose 'Analyze and fix button'.
Please check and let me know if you are able to view the font now.
Regards,
Anubha

Extension tab doesn't display

First Safari extensions weren't showing up. After some help, I was able to get the extensions tab back, but found the privacy tab won't display. I unknowingly jacked another thread, as I'm new at this, so now am posting my own. I'm running Safari 5.1.5 on OSX Lion, MacBook Pro 2009.
Thanks to whoever responds.
Michael

Hi Yogi ..
Try troubleshooting the Safari .plist file (preferences)
Quit Safari.
Go to ~/Library/Preferences
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop.
Relaunch Safari. Check Safari > Preferences. If that helped, move the .plist file to the Trash. If not, move it back to the Preferences folder.
If that didn't help, try troubleshooting Safari third party plugins > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues

Text won't display

my text won't display properly (size and position) in premeire elements 7

dannyellis1
What computer operating system are you running the Premiere Elements 7 program?
Is this a "it worked before but not now" type of issue or "it never worked before"?
Where is the text not displaying correctly...in the opened Titler, in the disc menu window in the Create Menus section of the program, other, or everywhere?
Is your video card driver up to date according to the web site of the manufacturer of the video card?
You mention size and position. What about font type?
Also, please include:
a. computer resources description
b. properties of your source media
c. project preset
d. description of Timeline content and duration
Let us start here and then decide what next.
Thanks.
ATR

Layered text and graphic in Word won't display when converted to PDF

I have several simple shapes with text layered in front in my Word document. After they are converted to PDF using Acrobat XI, only the shape will display. I can tell the text is still there, because I can use my cursor tool to select it, but it won't display visually. It looks like it isn't there but it really is. One bit of text is even an internal link, and the link still works but I can't see the text I'm clicking on.
If anyone has any suggestions I'd appreciate it.
Thank you,

Hi Lori - this was perfect! It was an issue with the layers being misordered. I used the Edit Text & Images tool listed under Tools > Content Editing, found the layers, then by right-clicking I was able to bring the text to the front and it all looks great now.
I would like to know why this happened, or if not why, how I could make sure it doesn't happen again. If there's a check box or other setting I could use to remove this problem that would be fantastic.
Thank you so much for pointing me in the right direction!
-Scott

PDF files won't display. Error message "Missing Plug-ins"

Hello. I am having trouble with adobe reader but only certain files. When I first signed up for school in may Adobe Flash Player and Adobe Reader were required and when I did the check plug-ins system check, both were installed and running just fine. Just in the past 2 days is the check plug-ins test saying Adobe reader is not installed. I have tried un-installing and re-installing but still saying it is not installed. I'm not having troubl with all adobe reader files. I'm an online student and my e-books are opening and displaying just fine. Also my pdf documents saved on my computer are opening just fine. When I try to view a websites brochure, a websites sale paper, or maybe open up an article, the page pops up but the image won't display. It keeps saying "missing Plug-ins". I have a MAC 10.6.8. running on Safari and I have downloaded Adobe Reader 10.1.0. I need to be able to open up articles because I'm doing a homework assignment that requires one. If u can help in any way, please do.

I've tried all the fixes listed in the discussions about missing plug-ins in Mail. None of them worked. I can see attachements in the emails, but when I forward them, the missing plug-in shows up in place of the attachments on the forwarded email. I'm running the latest OS 10.7 on my Mac Pro and I just downloaded the latest Java app. HELP!!

Store won't display search results, tabs dead

Search results in iTunes Stoe (11) won't display all items (i.e. it reads "Total: 301 items" at the bottom of the list but only 16-20 will show up (depending on my luck). This is even true of, for example, a podcast show page itself. When I scroll down, there are empty lines where episode titles should go, but if I go all the way to the end, they suddenly disappear and the "Total: 301 items" jumps to the end of the 16-20 item long list.
Categories within search results won't display either (i.e. I can see the "All," "Books," iTunes U" list on the right side, but clicking on each does nothing).
Going from "Details" to "Ratings and Reviews" also requires clicking the tab and then reloading the page. My connection is fine, this has been happening for at least the last month at home, while out, using wifi and when drectly connected by old timey cables. Updated this morning, still no change.
Help?

This article has some tips
http://support.apple.com/kb/ts1368
(particularly under Troubleshooting on a Mac)
If that does not help... As a test, to narrow down the cause, you may want to create a new user account in System Preferences Users & Groups pane. It can be Standard or Admin. Log out and log in to the new user account (do not use Fast User Switching).
Try running iTunes from the new user account, and accessing the iTunes Store.
If the problem does NOT occur in the new account, the cause is likely to be something in your primary user account. For example, it could be user preferences settings, or something related to your iTunes library, or a background process that runs in your account that is interfering somehow.
If the same problem does occur in the new account, the cause is likely to be related to the overall OS, the iTunes application, or maybe network settings that block access to the iTunes Store.
Either way, you'll be able better focus additional troubleshooting.

Safari won't display pdf in browser

Posted before in wrong forum.
I am really sorry if this has been posted before, but I have been searching the forums and can't find an answer to it. I was also looking for the FAQ article about this that Apple says is an answer, but can't find that either.
Anyway, using 10.4.11 and Safari 3.0.4. Safari won't display pdfs in the browser. It is gray with the Acrobat logo.
I remember reading that the solution is to uninstall (delete) Safari and reinstall 3.0.4. However, I cannot find an install for 3.0.4 for Mac, and then do something with Acrobat. I am using 3.0.4 because it was part of a bundled OS update. I can't go back and downgrade my OS...
What do I do?

Hi,
You probably won't have to reinstall Safari. Two things you can try. If you open Adobe Reader and go into the 'Internet' section of its preferences, you should be able to disable the browser plug-in. Some times that alone isn't enough, in which case, browse to HD/Library/Internet Plug-ins/ and move the Adobe plugin out of the folder. Restart Safari for the changes to take effect.
Yang

Embedded pdf in a tab - won't display in ie and crashes Foxfire

Similar Messages

Maybe you are looking for