Embedded video causes slow page load

Hi,
I recently noticed that any flash content webpage loads real slow in Firefox or Safari. It takes about 6 seconds for a webpage to load if there is a little YouTube window on it. In those 6 seconds the browser is unresponsive.
Is there anything I can do to speed this up?
Thanks

I have cleared my cache in Safari and Firefox - nothing changed.
I installed Flash 10.1 RC - no difference
I installed the Flash blocking addons - when I then click on the video window it takes the same amount as before to load (not surprising). But why is so slow to begin with when it comes to YouTube embedded content?
here is the website of our kids soccer club - it takes 8 seconds for the World Cup YouTube content to be available - playback is fine, but until it loads it takes 8 seconds - and for that time the browser is unresponsive (spinning wheel)
I have 256MB VRAM on the card (Radeon 9800 Pro) and otherwise 4GB RAM!
Thanks

Similar Messages

  • Slow page loads over LAN with 500GB TC

    Hello,
    Forgive me if this has already been touched on, I tried to run through the first six pages and didn't see anything that I thought matched my problem. I saw that there were reports of slow wireless speeds, but I have been experiencing problems over the wired connection to my TC
    I have a MBP connected to the TC wirelessly and a Mac Pro with a wired connection to the TC. They both render similar speeds in a speed test ~4Mbits down, but on my Mac Pro, I get excruciatingly slow page loads. Pages often take, on average, 15-20 seconds to come up at all, and some more time to finish loading completely. Meanwhile, I can load the same pages in a few seconds with my MBP over the wireless network.
    My cable coming from the TC to my Mac Pro is brand new, its at least CAT5e, and should be able to handle my down speeds without a problem. So I'm at a loss for what could be causing this. Could it be something with the computer and not the TC at all?
    Thanks,
    Scott

    Well, creating a test user put me on the right path. Deleting the systemconfiguration folder did not help, but I deleted the following files out of the $user/library/preferences folder:
    com.apple.internetconfig.plist
    com.apple.internetconfigpriv.plist
    com.apple.internetconnect.plist
    com.apple.networkConnect.000a27b47970.plist
    com.apple.preference.internet.plist
    com.apple.PrefPane.Network.000a27b47970.plist
    Basically any preference with "Network" or "Internet" in it and everything sped up immediately. Thanks for the help.

  • Slow page loads only since 10.4 upgrades

    Hi folks,
    Has anyone seen a problem with pages hanging up after updating from earlier OS X's to 10.4? First my wife noticed it when she got her new Mac Book -- an upgrade from 10.2.8 on the old machine. A couple of items would load on a page, but then it hangs up and stalls for a while until finally fully loading. Ordinarily, I'd peg it as just being slow serving of ads to particular sites, but it's not always ad-rich sites. And more so, it's strange that this only started happening in conjunction with starting to use 10.4 to surf the same sites that weren't hanging up before.
    Further confirming my belief that it has to do with 10.4, is that upon my upgrading from 10.3 to 10.4 on my G5 a month or so later, I started to immediately notice slow, slow page loads on that machine, too. Particularly, again, on sites that loaded fine with 10.3 just before the upgrade.
    I'm also having more problems with mailboxes loading slowly and kicking off-line since the upgrade.
    Is there some trick to get 10.4 to behave with regard to requests across the web??
    Thanks!!!!
    G5 Dual 1.8   Mac OS X (10.4.7)   Focusrite Saffire Audio Interface

    me too. My mini is wired, but I have the same trouble. I have a PC on the same router, and it has no problem with internet. I've been looking around a while, and it seems like this is a common occurrence and I have not found a fix yet. This is very frustrating. Also, the network status in the network diagnostics window shows the internet failing alot, but even when it's "green" I still can't always load pages.

  • Slow page loading / Time outs

    Hi guys,
    I am getting very slow page loading times. This only started to happen today, before this my connection has been solid.
    I have reset the router, all the other PCs in my house are having the same problem. I am not running any P2P/Downloading software.
    Speedtest says I am connected at 12MBPs. It takes me a very long time to load a page and most of the time they just time out.
    Router stats -
    ADSL settings
    VPI/VCI 0/38
    Type PPPoA
    Modulation ITU-T G.992.5
    Latency type Interleaved
    Noise margin (Down/Up) 3.6 dB / 5.7 dB
    Line attenuation (Down/Up) 29.5 dB / 12.7 dB
    Output power (Down/Up) 0.0 dBm / 12.9 dBm
    Cheers

    Keith_Beddoe wrote:
    There appears to be a problem with the BT DNS servers at the moment. They keep going offline.
    Hopefully someone is aware and dealing.
    Which ones are you using ?  BT have LOTS of machines providing DNS services
    I'm currently using:
    Primary: 194.72.9.38
    Secondary: 194.72.0.114
    ...and haven't really noticed anything untoward all day, and I've been online and active for most of the day. Not much longer though - soon finished, then it's beer
    I have seen quite a few reports of slow loading pages etc elsewhere though.

  • S4 slow page load and email wont receive auto

    I got the s4 1 week ago came from an iphone, so far not impressed! Slow page load time and email although set automatic wont load. phone is very slow! what should I do?

        Hello G433062,
    Have no fear Verizon is here! I am so sorry that you are having an issue with the Samsung S4 opening page slowly. We want you love your phone! Has this been an issue when you are using the Internet application? Or is it slow at opening any application? Have you tried to clear the history: http://vz.to/1g2WXjg Please keep us posted.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • Videos are SLOW to load

    I just downloaded the most recent version of safari (beta 3) and videos posted on websites are still EXTREMELY slow to load. Are there any updates that would help make the videos load quicker or is it caused by limited space on the hard drive? Any comments/answers would be helpful. Thanks!
    E

    Were you able to confirm any suspicions the browser could be at fault
    (or not) by trying to download the same video content through a different
    browser with current proper plugins, and etc?
    The speed of the internet connection is among prime things to confirm
    and consider when awaiting slow internet content downloads. Also, all
    system performance can be affected by insufficient hard drive freespace
    or flex-space for the applications and for use as virtual memory.
    The actual download speed of a file may vary through a combination of
    several influences or conditions within and from without the computer.

  • Shadow and gradients slow page load...why?

    I have read how shadows and gradients slow down a web site, and that you should replace them with (essentially) screen shots of the same (i.e. looks the same, but not using the shadow or gradient feature of iweb).
    I understand that larger photos (etc) slow down a page load, but I don't follow why these do. I am curious for an explaination. It would seem intuitive that the apple folks would publish a web site in a way that did not cause this (i.e. covert shadows and gradients to jpgs or something).
    thanks
    bob

    Shadows and gradients generally actually don't cause professional designers any issues, how you design it and what file format is important, most produce high quality images with a low impact to the web page load time. I have been designing for over 20 years and quite like iWeb challenges .
    iWeb however does something quite different, it adds to an existing image, mainly using javascript which slows the rendering and page loads. iWeb works great for non professionals as it's dreadfully poor from a site point of view, remember iweb is a toy in the software world of web design tools, so enjoy it for what it is..
    A simple way to prove is to design a single page in iWeb and the another using, say, Dreamwever, look at the rendering/load times.....

  • Why does embedded video cause audio sync issues?

    Greetings all,
       I have a question that is perhaps best answered by an Adobe developer or someone who knows the SWF file format and various audio/video standards fairly well. When one drags an FLV file into the library in flash authoring tool, a window appears. If you click "Embed FLV in SWF and play on timeline", an awful message appears, "WARNING: Embedded video is likely to cause audio synchronization issues...". My question is: why would there be any audio synchronization issue? Is this really just a bug/unimplemented feature? Or is there some fundamental shortcoming of current versions of the SWF file format that does not allow for the FLV audio/video signals to be properly encoded in the SWF file? Or is it that the flash player plays SWF and FLV data in fundamentally different ways and that even if the audio/video is perfected sync'd in the SWF file, the fact that it's a SWF file causes flash player to lose sync?
       I'm guessing only a Flash developer could answer this (and probably not just any Flash developer!), so if there are any out there, please spare some wisdom for a poor lost SWF surfer.
       Thanks!

    Hi:
    Welcome to discussions!
    From what I am reading, you are trying to use the audio that was in the original video-right? By that, I mean, you haven't added a voice over or music-just using the speaker's voice on the tape.
    If so, you might want to try using something like a Fade Out or Fade In instead of one of the transitions that add or subtract to the length of the video
    [Quoted from iMovie Help]
    Some transitions (for example, Cross Dissolve and Push) shorten your movie by a few seconds, depending on the speed of the transition. For example, if you add a transition with a speed of 2 seconds, iMovie overlaps 2 seconds from the first clip and 2 seconds from the second clip as it renders the transition. This shortens your movie by a total of 2 seconds.
    The Overlap transition freezes the last frame of the clip on its left and superimposes it over the next clip. Fade In/Fade Out blackens the last frames of the clip on the left and the first frames of the following clip.
    [End quote]
    Or you could try extracting the audio from the movie so that you could edit it and sync it that way.
    Sue

  • FAST Cable Internet -- SLOW page loading, both Safari & Firefox

    We switched from slow DSL (speed was about 2.5) to a fast Comcast cable service. Speed is now like 20 download with very low ping.
    Using Safari 4.1.1 and Firefox 3.5.11 --- I keep having pages load very slow, even when daily frequenting the same pages, and especially when visiting a couple forums, same forums I frequent almost daily.... Both browsers will take 40-50 seconds to load those boards...
    So, since both my browsers are acting the same, it might be something to adjust in both, or the issue is in one of my System Prefs. settings, and I'd like to find out which one and what can I check and change....
    Thanks!

    Gtreat might see this...
    What are question answers?
    When a community member posts a question as a topic starter, other members can post an answer in reply. Please note that not all replies actually answer the question.
    An answer can be just some hints or helpful information to help the poster solve an issue. The originator of the topic can mark such a reply as a "Helpful" post. A small yellow star will appear next to that reply and the person who posted the reply will be awarded 5 points. Here's what a reply marked as being "Helpful" looks like:
    If a community member posts a specific answer that provides a solution to the original poster's issue, the originator can mark this reply as a "Solved" post. A large green star will appear next to that reply and the person who posted the reply will be awarded 10 points. Here's what a "Solved" post looks like:
    http://discussions.apple.com/help.jspa
    God bless!

  • Slow page loads

    Hello,
    I created an application a while ago and have been looking into why the pages load so slowly. I thought maybe it was due to a function that I had on Page 0 so I made a copy of the application and removed the function on page 0 and put it in an application item/computation. I'm not sure if that was the reason behind the pages loading so slowly, but in my copy application the pages now load pretty darn quick. I made the exact same changes to the production application, but the pages still load slowly.
    When I look at the pages in Debug mode, I see that it starts to slow down when the "Fetch application meta data" is performed (from .01 to 1.51...I even saw 2.67 on one page load). When I look at the copied application in Debug mode, everything looks the same except the load times are quick.
    Does anyone have an idea as to why this is happening?
    Thank you,
    Tammy

    Assuming the department names aren't needed for your page, you could add a condition to the function that makes it only fire on specific pages.
    If they are needed, you're going to need to look at the query's performance and how the data is used on the page. I don't think we have enough information at this point to help.
    -David

  • Slow page loads, dropped connection

    Hi,
    Looking for some advice here. I write for the web for a living, and spend most of my day online. I'm not happy with the speed of my connection right now, and am considering upgrading to a faster package. I'm currently on the 768k to 1.5Mbps DSL package.
    The problem is, I don't get anywhere near the speed I'm paying for now. Page load times go from speedy to drop dead slow (20-30 secs), and often hang. I'm not sure what's going on, although I can say my mother has the same problems at her house (next town over, same DSL package). I can't see paying for a "faster" package when I don't even get the speed I should be now.
    Here are some stats. Hoping someone can take a look and give me some thoughts about whether a speed upgrade would be worth it.
    Verizon speed test:
    Analysis information:
    Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
    SendBufferSize set to [132480]
    running 10s outbound test (client to server) . . . . . 481.45Kb/s
    running 10s inbound test (server to client) . . . . . . 138.24kb/s
    ------ Client System Details ------
    OS data: Name = Mac OS X, Architecture = x86_64, Version = 10.6.8
    Java data: Vendor = Apple Inc., Version = 1.6.0_24
    ------ Web100 Detailed Analysis ------
    Client Receive Window detected at 524280 bytes.
    Cable modem/DSL/T1 link found.
    Link set to Full Duplex mode
    Information: throughput is limited by other network traffic.
    Good network cable(s) found
    Normal duplex operation found.
    Web100 reports the Round trip time = 155.6 msec; the Packet size = 1440 Bytes; and
    There were 40 packets retransmitted, 2 duplicate acks received, and 0 SACK blocks received
    The connection stalled 2 times due to packet loss
    The connection was idle 1.05 seconds (8.07%) of the time
    This connection is sender limited 22.57% of the time.
    This connection is network limited 77.42% of the time.
    Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch
    Web100 reports TCP negotiated the optional Performance Settings to:
    RFC 2018 Selective Acknowledgment: ON
    RFC 896 Nagle Algorithm: ON
    RFC 3168 Explicit Congestion Notification: OFF
    RFC 1323 Time Stamping: ON
    RFC 1323 Window Scaling: ON
    Information: Network Middlebox is modifying MSS variable
    Server IP addresses are preserved End-to-End
    Information: Network Address Translation (NAT) box is modifying the Client's IP address
    Server says [72.68.84.139] but Client says [192.168.0.4]
    Broadband Speed Reports tests:
    Parsippanny, NJ (closest server) -
    Download 210 kbps
    Upload 367 kbps
    latency 40 ms
    Washington, DC -
    Download 794 kbps
    Upload 347 kbps
    latency 24 ms
    Los Angeles -
    Download 423 kbps
    Upload 333 kbps
    latency 124 ms
    Router stats:
    ADSL Link Downstream Upstream
    Connection Speed 1792 kbps 448 kbps
    Line Attenuation 17.0 db 7.5 db
    Noise Margin 30.3 db 21.0 db
    I think my transceiver stats look good for higher speeds, but I'm wondering why I get such inconsistent and generally slow download speeds now.
    Thanks for your help.
    Debbie

    Has the line been performing any better since the last post? If not, find a time where it is working poorly and register an account over at DSLReports.com if you don't already have one. Fron there, visit their Tools section of their site and perform the Line Quality/Ping test. Be sure that before you start the test, your router/modem is not blocking Pings since this will result in the test having less data. Also, ensure nothing is using your connection before and during the time of the test being ran. Post up the results of the test once it has been completed.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Why are YouTube videos so slow to load?

    Hi Gang,
    I've been greatly enjoying the Pismo I totally revamped with help from JPL and Cornelius. It's now faster than my G4 12". But Youtube videos are painfully slow to load. If they finally do load, the motion is usually quite jerky and out of sync. Just tried three different videos on the Salon site and none of them would load. This is not the case with other videos (QuickTime or RealPlayer). Is this a hardware, software or site problem, and is there anything I can do about it? Thanks for any insight you can give.

    GB:
    I am able to watch streaming video on my Pismo, but I can't be doing much else on the computer. However, I don't do YouTube and I don't know how that will work. But I do watch news clips or streaming video from CNN, for example. I watch it the default size, and it is fine, with a little problem with video/sound synchronization. Streaming video works a lot better for me with Real Play, though. Almost perfect even with their max size. That is true even on my wife's Pismo with a regular 500 MHz processor and 640 MB of RAM.
    I agree with Jon and jpl on the video card limitation. To the best of my knowledge it can not be upgraded.
    Cheers
    cornelius

  • Very slow page loading on Safari

    I am having problems with my Mac. I am not sure if it is the Safari software or something else. For the past several weeks my computer has been very slow at loading pages, going to the next page, going back to a previous page etc. Can anyone tell me what I need to do or check to make it run faster. It used to run very fast. Thanks Vickie

    I had a similar problem with Safari (or any browser) taking a very long time to load pages. Downloading files is fast (6 Mbit/s) so I knew my network speed was OK. I usually run wirelessly both at work and home and the problem was the same no matter where I was working. When I directly connected to an Ethernet line, browsing was fast again so I looked into the network setting for my airport connection and found I had switched the "Location" from "Automatic" to a specific DHCP setting. I don't know why but when I switched back to "Automatic" everything was fine again (super fast as before). Specifically, I just went to the "Apple" menu icon (top left and hit "Location->Automatic". That's all.

  • Slow Page Loads: Is It Just Me?

    I have a 30mbs connection and recently—past few months—page loads have become painfully slow, or in most cases never completes.
    I have tested via my providers speed test and several online speed test sites and my connection is in excellent shape.
    I can load pages without 'ad' type content and all is fast, but going to any popular news site, or any site that has lots of ads and flash content, I get painfully slow response or in most cases the page never completes loading.
    Has anyone else noticed a slow down recently? Is this simply that websites have become so filled with ad clutter that they will not load?
    Just wondering if it is just me and if I should start the provider-support-**** route or learn to live with it.
    Thanks...

    Which browsers is it on?
    For Safari
    Reset Safari
    Run these commands in terminal
         defaults write com.apple.Safari WebKitInitialTimedLayoutDelay 0.25
         defaults write com.apple.Safari WebKitResourceTimedLayoutDelay 0.0001
    For Chrome
         1. Open chrome
         2. Preferences > Under the Hood
         3. Under the privacy section, uncheck the first 2 boxes and also the last box.    

  • Slow page loading even though speed test is fine

    Hi all, I have noticed that pages and content are very slow to load over the last few days. I ran the speed test and the results are fine (37mb down 8mb up). I thought it may have been Firefox because it can play up. After testing with Chrome and IE9 I can confirm it is definitely not right.
    Anyone else having problems? I am on the Macclesfield exchange. Connected via ethernet directly to the HH3.

    Infinity fitted Tuesday. 37.8mb down, 1.8mb up. Pages are slower to load than before my upgrade ! As a non techy with computers, you must excuse any embarrassing blunders with technical issues, but, I have found if I use AltaVista instead of Google, everything is fine. If I type fast into the search bar on Google it can't keep up with me ! If I try to deleate the www entry a character at a time, it goes in fits and starts as it receeds back across the screen. I had no problems with the site till the upgrade. Is it just a problem with Google and the increased speeds or is that too simple an answer !!
    RAYH
    RAYH

Maybe you are looking for

  • "Could not complete your request because of a program error" when applying text layer style

    This just started happening recently after opening up an Illustrator file in Photoshop. Any clue?

  • Garbage characters when using CR XI R1 with Sharp M350 printer PCL5e driver

    My application uses CR XI R1. We have a customer who has a Sharp M350 printer. When printing or previewing a report from my application with this printer set as the default, the text is garbled - the characters look like gibberish. If they change the

  • ALV Object : how to manage two grid in one screen ?

    Hello, I would like to print in a same screen two ALV grid with different command for each. The two grid will be linked. One is the header of the datas and the second represent the items of the selected data in the the header grid. Is it possible to

  • Advanced Photoshop Action Needed

    Hey guys, I would like to make an image resize action that will take any size image and re-size it to 200px X 200px without over cropping the image or distorting the proportions? Is this possible or am reaching for the heavens? Thanks

  • File system block size?

    I'm getting a result of 8192 on my iPhone 3GS, I thought it was 4096? It's also telling my app it has over 3GB of space to play in, I thought it was limited to 2GB. Have things changed with the 3GS? Just making sure I'm reading the right information.