Embedding a flash file in a another flash file

Very specific question: I have a file (http://www.flabell.com/flash/Simple-Flash-Mp3-Player-37) that I want to embed/insert/open/etc. in another .fla file that I have opened in a tab in Adobe Flash Professional CS4. The entire website is a decompiled .fla file, and I want the mp3 player to be completely interactive in the page. I want it to load when the page loads, and have the transport buttons all activated by being clicked. This works whenever I open the mp3 player .fla file in a separate window in Flash, but this is achieves nothing. I have gotten as far as converting the .fla mp3 player into an.flv file and embedding the file in the website .fla file, however it is as good a .jpeg file. How can I accomplish this?

The only ways to get a separate swf file to load into another swf file is to do it dynamically. If you import an external swf file it will lose all of its actionscript. You can try copying the timeline of the mp3 fla file into a movieclip in the other fla file if you want to combine the contents of the two and have the mp3 player work.

Similar Messages

Sequence of one sequence file called by another sequence file

Hi,
Is there any method by which we can call sequence of one sequence file from the another sequence file.
Please let me know in case you know.
Thanks in Advance,
Vivek

Hi,
Yes, look at the Computer Motherboard Test Sequence.seq in TestStand\Examples\Demo.
You have to use the SequenceCall Step Type and specify the path to the other sequence file, use the browse button. Then use the sequence control to select the sequence within that sequence file that you wish to invoke.
Hope this helps.
Regards
Ray Farmer
Regards
Ray Farmer

Frame file looking for another Frame File

Hi,
Working on a document which was created by someone else (who is no longer here). When I open the main Frame file it prompts me that there is a Missing File, which is not an art file, but another Frame file. I cannot figure out why this is happening and have never seen something like this. There is no information with the archived source files how or what the writer did when he created this.
I am attaching the pop-up window.
Thanks,
Mary

I wondered if it might be a missing text insert, but these give a different error message (at least in 9.0, and as far as I remember in earlier versions too)
Can you lay hands on a print-out or a .pdf of an earlier version, to give you an idea of what content might have gone missing?
N

How to run java file by using another applet file ??

how to compile and run java file by using another applet or japplet file .

how to understand what you are talking about.

Unable to display the Content of a data file from within another data file in Oracle webcenter portal.

We have a Content Presenter taskflow. This task flow is added to a jspx page. The taskflow fetches the content from the contributor data file. The contributor data file is having a WYSIWYG editor. The content of the WYSIWYG editor is being displayed correctly through the task flow.
We have some links in the WYSIWYG editor. These links again point to some data files. When we click on these links from within the portal, then we are getting a blank page(the url of this blank page is: http://localhost:7101/eWSIBPortal/faces/oracle/webcenter/sitestructure/render.jspx?datasource=UCM%23dDocName%3AWSIB_ARTICLE) and not displaying the content of the data file that we are pointing to from the WYSIWYG editor.
We want to display the content of these data files(which we have pointed from WYSIWYG editor) in-line within the portal.
Please help us to resolve this issue and let us know if any information is required from our end.

Thanks for reply. However, can I use XSQL to dump the formated text to a file? or just can display to client through web browsers?

Creating jar file including 2 another jar files

hi
My project has java files, properties files,batch files as well as two jar files,mail.jar & activation.jar(for importing packages).
I have to include these jar files while setting environment variables.
Now i want to make "MyPrj.jar" file for myproject ,can anyone pls help me how to include these all files into a single jar file. and how to make setup file
I have tried to extract out .class files of mail.jar & activation.jar & i ve created MyPrj.jar by including all class files(including class files of mail.jar & activation.jar) but manifest file(headers) are not added to MyPrj.jar.
i have also tried to give mail.jar & activation.jar in Class-Path of menifest file, but it is also not working.
Pls Help
Thanks a lot

[http://sourceforge.net/projects/one-jar]
"One-JAR(TM) is a simple solution to a vexing problem in Java: how to distribute an application as a single jar-file, when it depends on multiple other jar-files. One-JAR uses a custom classloader to discover library jar files inside the main jar. "

Please Help!!! Flash page linked do another flash page on server doesn't work

Hey,
I'm creating a website for a client that has a component
scroll on the main stage linked to a dynamic text box with some
buttons that when clicked will load an external file on Layer 1 of
the main timeline in Flash. When I tested it in Flash it worked,
when I previewed it in Dreamweaver it worked but when I uploaded it
to the server. The main swf loads but the files that are linked to
the main .swf don't
On the first frame of the main time line I have the code
below
loadMovieNum("movies/Thumbnail1_mc.swf",1);
On each of th buttons I have the code below
on (release) {
loadMovieNum("Movies/Thumbnail1_mc.swf", 1);
I have read some of the posts here but my main .swf file
plays so its not the "scripts" folder in the wrong place.
and I'm pretty sure that it can't find the files due to my
path to the file, but I'm not sure how to get the main .swf file to
look for the Thumbnail .swf files on the server. Please help.
Thank you

http://forums.adobe.com/thread/1195540

Parse exisitng xml file and recreate another xml file with different struct

Is it possible in java using dom parser to parse an exisiting xml file and recreate a new xml file from data obtained by parsing old xml file.
I checked on old forum threads and everywhere either parsing xml file has been explained or creating new xml file from scratch has been shown.
Any examples/guidance will be appreciated....

The general process is:
Document dom1 = ... // the parsed document
Document dom2 = ... // new document constructed on the fly
Node nD1 = ... // some random node found in dom1
// copy the node from dom1 and associate with dom2
Node nD2 = dom2.importNode(nD1, true);
// ... treat nD2 as a node which can now be inserted into dom2 ...
Node otherD2 = ... // some other node already in dom2
otherD2.appendChild(nD2);Note, in this example the nD1 node is copied (including any sub-nodes) into a new node, nD2. You can alternately move the node from one Document to another using Document.adoptNode(), however this may fail (see the javadoc).

Using File Share creates another .motn file.

Whenever I use the share feature under File to save out a H.264 file it also creates a Motion project file in the directory with the render. Is there a reason for this? I end up with tons of these duplicate files I have to clean up.

Maybe Compressor is supposed to delete them when it's done? Does it have rights to the directory?
Patrick

Dropping a song file brings up another song file already in my library

I have a bunch of files with the exact same "Titles", of various duration, but with different file names.
When drop one of these files into the iTunes library. It pops up as a different file that's already in my library.
Just to be on the safe side, I created a new blank playlist, then droppped the song again on that playlist. But the bug is till there and it brings up that other file.
The only relation I can see between the two is that they have the same ID3 Title and the same timing...
How can I avoid this bug ?

Louis,
Interesting. I more or less reproduced that behavior, on Win 7 running iTunes 10.6.0. For the same song with 2 different filenames, iTunes did not create a second library entry.
It might be bug, or more likely a "feature" to help people avoid unintentionally creating duplicate entries.
When I edited (outside iTunes) the ID3 title of the 2nd file, and re-added, iTunes then treated them as 2 different tracks. (The MP3 audio was identical for both.)
In your case, you might want to add some unique descriptor to each ID3 title tag. That will probably be enough for iTunes to correctly distinguish them.
Let us know how you make out.
Ed

A web service that returns a xml file and gets another xml file as input?

Hi,
I want to create a web service which gets an xml document as input then returns again an xml document.How can I create this kind of web service?
Is this kind of implementation is possible?
public Document mywebservice(Document input){
Document d;
return d;
or do I have to use serialization processes which I don't know very much.
I am waiting for your help.Thank you...

If you want to deal directly with the Document and not want the SOAP engine to serialize/deserialize the XML into Java objects, then you can easliy implement this using Axis. Look at the Axis documentation (http://ws.apache.org/axis/java/user-guide.html#ServiceStylesRPCDocumentWrappedAndMessage) under the heading "Message Services". One of the provided API methods that Axis provides is in the form you want: public Document method(Document body). Hope that helps. As for how to implement the service using Axis, that is beyond the scope of this forum. Check the Axis docs for more help on that.

Flash AS3, Need script for .exe to open another .exe file

Hi all,
Has anyone got a script to allow an .exe file to open another .exe file? If so, I could sure use the help.
many thank in advance.
HD superglide

You can use fscommand("exec") to run a batch file to open an exe - but exe is a Windows executable, not for Mac OS
Kenneth Kawamoto
http://www.materiaprima.co.uk/

I need to access/pass variables'(s) of a .swf file into another .swf file.

Hi all,
I have basic knowledge of Flash and AS3.0.
Suppose i have a flash swf file(main.swf). In this main.swf
file, i loaded another swf file(sub.swf) by writing the following
code snippet in main.swf file as shown in Attach Code:
Now, how to acess the data present in main.swf into sub.swf.
Note: Here data represents values/data stored in
variables/objects of main.swf file.

Does this actually work -- assigning variables directly on the loader? I'm interested in setting flash variables on the loaded SWF, but I get a compilation error when trying something similar:
Error: Access of possibly undefined property x through a reference with static type flash.display:Loader.
[exec]
[exec] textLdr.x = 50;
I also tried casting the loader to Object, which compiles but then fails at runtime.
-Dave

Using Actionscript 3, how do I code a button in a parent file to load at a specific frame in another swf file?

Using Actionscript 3, how do I code a button in a parent file to load another swf file at a specific frame?

You can either place the loading code in the desired frame of the parent file, or continuously monitor the currentFrame proiperty of the parent file and do the loading when the value matches the desired frame number.

Insert an swf file into another Flash file

Hi,
I'm a newbie to flash trying to insert an SWF flash file (a game) into another Flash file. However, when I import the swf file into the library and drag it onto the frame (and insert the stop(); command onto the frame action to stop it playing the whole movie), the SWF file plays constantly, ignoring all the actionscript and button commands in the game SWF file.
When I try inserting it using the Window component, the game SWF refuses to play at all - it just stops (clicking buttons in the game work, but it goes-to-and-stops instead of go-to-and-play like it's supposed to do). The only other component I could find was called "Loader". Using this doesn't work either, it won't play any of the animation, just like using the "Window" component
When the game SWF is played by itself (by just double-clicking to open it from Windows Explorer or embedding it in a web page), it works fine.
Any help how to do this would be appreciated.
Thanks.

Hi,
I'm posting in this thread because my problem seems similar but may be not...
In my first swf, I'm loading a second swf via loadClip().
My second swf works well alone but when I try to integrate itself in my first swf I'm losing my events. My events only works on my first swf.
I'v tried your trick with _lockroot but he doesn't work for me too.
Is someone have an idea to help me ?
Thx
My code is really basic
First swf:
        var mcloader:MovieClipLoader = new MovieClipLoader();
        var listener:Object = new Object();
        listener.onLoadInit = function (mc:MovieClip){
            main_obj.__preloader.die();
            obj[funct](target_mc, param);
        mcloader.addListener(listener);
        mcloader.loadClip(file_name, __loader);
Second swf:
    var box:MovieClip = this.createEmptyMovieClip("box"+depth, this.getNextHighestDepth());
    //Draw box
    drawBox(...);
    // Event on Box, Change Alpha and show arrow or not
    box.onRollOver = function() {
        drawBox(...);

Embedding a flash file in a another flash file

Similar Messages

Maybe you are looking for