Embedding a google form into iWeb.

I am trying to embed a google form into iWeb and the full form does not show up. I used the HTML widget and copied and pasted the google link.
Thoughts?

Hi Ralph,
We can use fragments for such requirements but at the end when you add a fragment only the xfo is copied not the data.
so ideally this is not possible in Adobe forms atleast for now. so we need to have links to launch the child form.
Cheers,
Sai

Similar Messages

  • Embedding a google form into wiki

    I am using the xserve for a wiki site and I would like to be able to embed a google form into the wiki page. I can do this in wikispaces, but I would like to have it on our own wiki site. I would also like to embed a video that same way. Can this be done on the wiki site?

    Hi Ralph,
    We can use fragments for such requirements but at the end when you add a fragment only the xfo is copied not the data.
    so ideally this is not possible in Adobe forms atleast for now. so we need to have links to launch the child form.
    Cheers,
    Sai

  • Inserting Forms into iWeb

    Is there a way of inserting fill-in forms eg application forms into iWeb ?
    Or, can someone give me a solution for producing an application form, apart from having a pdf form to download ?
    Thanks
    Anton

    Yes. There are a couple of ways. 1 - use a 3rd party site like Wufoo to create the form and embed it into your iWeb page using the code from Wufoo and an HTML snippet. 2 - use Form Action code.
    The following demo page shows each method and the code used: Embedding Forms & Encoding Email Addresses.
    OT

  • Embedding web forms into iweb pages.

    I need for someone to answer the question on whether you can embed opt-in webforms into iweb pages and if so how do you get the code into the iweb code so it shows up on the page. Im using Aweber and need to put their opt-in form on my iweb page.
    imac G5   Mac OS X (10.4.9)  

    http://www.varkgirl.com/Varkgirl/Basic%20HTML%20Additions.html

  • Inserting Google map into iweb page

    Hello
    I have just bought iWeb 2, and used it to start a website at http://web.mac.com/peterdewit/toymaker/Home.html. (it comes up if you leave the end bit off!)
    I followed what seemed to be incredibly simple instructions to create a Google map. It looked so easy I thought it was too good to be true. Unfortunately that turned out to be the case!
    After more than one hour I gave up. A map of 1 Infinite Loop Cupertino California was determined to remain as the star attraction of my Location page. Even my wooden Royal Danish Life Guard and Grenadier Guards Drum Major couldn't remove it!
    Does anyone know what I am doing wrong?
    Any help gratefully accepted.
    toymaker1

    Here's a wild guess...
    Sometime ago, I read in this forum about somebody having problems with the default email address used by iWeb for the "email me" button. It seems to get this from your personal information in "Address Book" which you filled in when you first opened the application.
    If you didn't do this, it is probably still using the Apple Computer Inc. information.
    Try trashing the Apple entry and make sure your own "user" one is up to date with your correct address, email etc.
    I hope this helps - I DID say it was a wild guess!

  • Embedding form into html page

    I have embedded my adobe form into my website html page using the correct pixel width but it previews larger and is blowing out my webpage size - any thoughts?

    Hi,
    Please provide the link to your webpage or send it to [email protected]
    What browser are you using to view your webpage? are you viewing your webpage via mobile devices or laptop/desktop?
    Thanks,
    Lucia

  • Embedding a Google map

    where can I find documentation on embedding a Google map into a BC web page

    This also depends on what functionality you are hoping for to. Typically the simple embed gives you only the basic map. I use the API as it gives me tons of control.
    To see the difference in the methods and how to do it go to the Google Maps section Google Maps Web APIs — Google Developers

  • Inserting a Form Created in CoffeeCup Form Designer into iWeb...

    Hi all,
    I created a web form in CoffeeCup's Flash Form creator (on my PC). The end result is 7 files and a section of code. I presume that I can insert the code as a snippet (I have version '08) but I'm unsure as to where to put the 7 associated files. In addition, this site is hosted on Go Daddy, not .Mac. Any tips on where/how in the folder architecture on my Mac to place the 7 files generated by CoffeeCup and does anyone know if there's anything funky I need to do to post this all to Go Daddy... Thanks in advance for any advice...

    Yes, you can enter the Html code as a snippet, however, as far as I know you have wasted your time creating 7 pages with coffee cup as you will not be able to merge them into iWeb. Others have asked this same question and I don't think it is possible to merge web sites or pages created with other web site packages such as Dreamweaver into iWeb. You can't import in that way.
    You will either need to use iWeb or coffee cup, but not both.
    Use an ftp client to upload to GoDaddy. There are many - Fetch, Cyberduck or Transmit. You can do this in iWeb too.

  • Embedding Form into Outlook 2010 Email

    I wish to embed my form into an email (NOT a link) - like Google Docs provides.  My desire is for prospects to read my email message and have a small submission form at the bottom - all self contained in the body of the email.  Please explain how to do this.  Windows 7, Outlook 2010. 

    Hi,
      Currently FormsCentral does not support this.  If you like please vote/submit a feature request at
    http://forums.adobe.com/community/formscentral  select "Submit Feature Request" link on your right.
    Thanks,
    Lucia

  • Embedding an existing Adobe Form into a Webdynpro Application

    Hi Everyone,
    I have an existing adobe form created thro transaction SFP and its working well.
    I need to launch the form with a Webdynpro application now. I was able to embed the adobe form into the Webdynpro View. The View's context is supposed to pick up the context of the adobe form automatically.
    However I am getting the following error - Either your Interactive form UI element is not bound to a context or a corresponding context does not exist.
    I am not sure how to proceed coz the I executed the Adobe from in SFP and its working perfectly and obviously its bound to a context/ interface.
    Any Ideas?
    thanks for your suggestions in advance !
    Liz

    Pradeep,
    You are right. This time I could bind the context from my interface (even though it was ABAP based).
    I have one quick one for you - you mentioned earlier that when we embed an existing form into Web. View, we cannot have an Interactive form even when we check the 'enabled' property. Can you throw more light onto this pls?
    The runtime error that i am encountering now says :
    Adobe Processing Exception: PDF is not interactive. Data can be only imported into Interactive forms.
    the source text of error is:
    get result
    m_pdf_object->get_document ( importing pdfdata = pdf ).
    catch cx_fp_exception into lr_fpexc.
    raise exception type cx_wd_general
    exporting
    previous = lr_fpexc
    and this exception is not caught ! I am still lost
    thanks again for your help!
    Liz

  • Is there a way to take the code form my iweb site and put in into iweb on a different mac?

    I had built my website on an old laptop - the hard drive shattered - and yes i was bad and didnt back up.....
    I want to update my site - but i dont want to start all over  - i just want to make some changes and re publish -
    Can i get the current code off ther website- put it back into iweb make my changes and republish???
    THEN ILL BACK UP!!!!! lol

    THat would be a much better question for the iWeb support forum - thie is the iPhoto forum
    LN

  • Creating forms for Iweb sites

    MY question is about creating forms for iweb sites.
    How do you do it?
    I think I read somewere that you can't do this with iweb,
    so I downloaded a free trial of rapidweaver, which will give me 3 pages for
    the free trial, but it says you need php.
    Which I don't know if I have php on my computer, my mac5 os x,
    and I am not sure what php is.
    If any one could explain how I can create forms on my iweb site
    in a easy to understand point form.
    That would be great!

    Well I am certainly willing to try, if you could
    explain how to do this
    Thanks for your reply.
    blueform,
    If you found my first post to you helpful, please mark it as such. That way people will have an easier time searching for/with a similar question about this topic.
    Okay, I can't go into all the dynamics of the process as each ISP may vary enough to make my description unusable. In other words, what works with my ISP may not work with yours. You'll need to check out your ISPes position and requirements as far as this goes.
    The first and most important thing to check out is does your ISP allow you to use CGI scripting such as PERL or PHP. Many small locally based ISPes allow this feature. Some large ISPes in Canada such as Bell's Sympatico give you Web space but do not allow scripting.
    Next, unless you are an accomplished programmer you need to find (ideally) a free script that allows you to e-mail a form. I generally recommend something from Matt's Script Archive The scripts are are simple, come with instructions and work fairly well. There is also PHP Junkyard. I use one of their scripts for a message board I have.
    Be forewarned, there is a learning curve. Also, if your ISP permits these scripts, you will need an FTP client application to upload them once you have made any necessary modifications.
    As an afterthought, you might Google around and see if anyone provides a service that might suit your needs. Usually in those cases all you need to do is enter some HTML code into your iWeb page. This is not a drag-n-drop process and requires some "under the hood" work. One last point. Most of the scripts that I've dealt with will require an e-mail address to send the completed forms. If all is done according to instructions, Spammers will never see the address (you set the permissions for the file that contains your e-mail address so that only the owner can read that particular file; the owner being you). Does this give you an idea of what is involved?
    Dual 867 MHz G4, iBook G4, PowerBook G3, Beige G3/266, Newton MessagePad 2000   Mac OS X (10.4.6)   FutureBasic 4 Programmer

  • ICal into iWeb?

    is there a way to import an iCal calendar into a website using iWeb? I've searched the support sites and have tinkered around with both programs but can't find out how to get my calendar on my website. Thanks for any help.

    Hi
    Check out the following link http://iwebfaq.org/site/iWeb_Calendar.html for info concerning the addition of iCal or Google calendars using iWeb
    Hope this helps
    FlatE

  • Embed iCal into iWeb through HTML snippet after Lion OSX update

    How do I embed my published iCal calendar into iWeb through an HTML snippet AFTER the Lion OSX update last month? I use iWeb to create my classroom website but it no longer has my interactive calendar for my students. Help!

    I am curious about this too, does anyone know how to embed a Lion iCal Calendar into iWeb?
    I found an old walkthrough of how to do it, but on the published site it just opens ical and offers a subscription, you cannot actually see the calendar on the web page it is embedded on.
    Thanks!

  • Create .kml based google map in iWeb

    Using iWeb 08, I can easily and successfully insert google maps into my pages using the web widget. I am then limited to an address though for the base map.
    Does anyone know whether it is possible to insert a google earth based .kml file in iWeb so that when a user opens the page, the desired placemarks etc... are displayed and available?
    If so, how might I go about accomplishing this?
    any pointers are very much appreciated!

    furban wrote:
    Using iWeb 08, I can easily and successfully insert google maps into my pages using the web widget. I am then limited to an address though for the base map.
    Don't use iweb2 google map widget.
    Instead, go to google map, enter the GPS coordinates, then add it using HTML Snippet. See this thread:
    http://discussions.apple.com/thread.jspa?threadID=1399683&tstart=0

Maybe you are looking for