Embedding another website [was: Website]

I would like to know if embedding another persons blog or website is acceptable.
[Subject line was edited by moderator for clarity]

In general terms, no, it is not acceptable to embed another person's blog or website without their permission.
Everything published on the web is the copyright of the person who created it. Using another person's material without permission is likely to result in a demand to take down your website.
The exception is when the creator of the original site releases the content into the public domain, or publishes the material under a Creative Commons licence. Even when the material can be freely reproduced, it's normal to acknowledge the original creator.

Similar Messages

If I try and follow a link from another website to open another I get awclick.php (GIF Image 1x1) pixels in a new tab instead of the web page I want.

I was trying to open a website as a link from another website and I get a new tab that says
awclick.php(GIF Image 1x1 pixels)
I can open the website without clicking on a link to it by just typing in the address but as this is a cash back site I am linking from it doesn't help!

You're welcome

When i try to click on the website,why it will jump to another website?

when i try to click on something in safari,the mouse will open another website.something like advertisement website..

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

When search website,another website always appear when I try to click one place

Hi,
      I bought a new MacBook Air in China on August 26th,2014,and I brought this to Canada.I have some questions with my computer:
       1,Why there always have some sound when I press the bottom of the laptop,I don't know why.
        2, When I go through a website,there always appear another website when I click somewhere in the website----there is no any interlinkage!
        3,Whether my laptop has virus--because a product--mackeeper always appear when I use Internet
        4,Why can't I use Youtube;
         Wish give me feedback soon!
my laptop is:
1.4 Ghz Intel Core i5
4 GB 1600 MHz DDR3
OS X 10.9.5(13F34)
Thanks very much!
Best Regards,
Iris

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Publishing another website

hi-
i have used iWeb to create my first website, which i'm publishing through .mac. everything's working fine, nothing to report.
i'd like however to publish another website, not related to first and was wondering why it's not working... i've created the second website and whenever i hit 'publish' nothing seems to happen. it looks like it's not published anywhere. when i select to 'visit the site', i'm taken to my first site.
are we only allowed 1 site per .mac account? is this why my second account is not being published?
HELP!
thanks!!
macbook Mac OS X (10.4.9)

Try clearing Safari's caches (CommandOptionE) and try again.
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
I found that this method greatly increases my productivity as far as managing multiple sites.
Do you Twango?

How can I move photos from one website to another website?

I can't seem to get how to move my photos and pictures I find on the web to another website or my blog. Uupload, download ...it's all Greece to me. No offense intended.

Are your photos in iPhoto or are they stored in folder on your iMac?
Firstly, the two Macs need to be connected, either via ethernet or wirelessly, on the same network.
The same can be achieved by copying the photos from your iMac to an external hard drive and then to your MBP.
You can copy the entire iPhoto library over to your MacBook Pro and replace the existing iPhoto library in the Pictures folder. (Do you have photos in the iPhoto Library on your MBP?)
It is also possible to have more than one iPhoto Library, by giving the library on the iMac a new name, and then copying it over.

When i search for a website it takes me to another website. I will click on the link and it takes me to one ive never wanted? please help very frustrating! I am not very computer savy, is it my settings or something? Jen

When I search for a website it itakes me to another website. I will click on a link and it takes me to something completely different or yellow pages etc. Please help I am very frustrated and not very computer savy! Thanks! Jen

Hi Jeff I have uninstalled Muse from my applications and have tried to download the new version but it displays a message 'file not found'. I have included a screenshot.

Can I make another website using iWeb,then publish it to a different server through the SMTP panel on iWeb

Can I make another website using iWeb, and then publish it to a different server through the SMTP panel on iWeb, even though I have a website published on mobile me, can I just use the SMTP engine to publish a different site but to a different server, that's the question I'm asking. I'm hoping for a quick reply. Thank you for your time in reading this.

Yes. You can do it one of two ways:
1 - select FTP Server in the Publish To menu (click on the site folder to get to the options) and enter the FTP address, username and password and publish as you would if using MMe.
2 - select Publish to Folder and publish. Use a 3rd party FTP client like Cyberduck to upload the site files to there server using the FTP address, etc.
OT

How to access a page from another website in to the portlet

Hai,
I need this specific requirement. In a portlet that is written in jsp, i need to access another page which is running in another server.I will explain what is my requirement clearly.. In a portlet, i have to acess a page from another site, and i have to pass a parameter directly. If i use URL-Based Portlet with passing parameters, It ask the user to enter the parameter and submit the page.. But what my need is, i have to pass the parameter directly. what i am planning is in a new tab, i will add a portlet, where i need to access the another website page..when the user opens that tab, it directly shows that website..... How do i proceed...
Can anybody help me.. Its URGENT....
If possible send me the code..
my mail id: [email protected]
Thanks in advance
damodar

Damodar,
To include an existing JSP page as a portlet have a look in the PDK section http://portalcenter.oracle.com there is lots useful information. The two things you might find most relevant is a paper on creating java portlets. This paper has a section on turning an existing JSP page into a portlet
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/HOW.TO.BUILD.A.JAVA.PORTLET.USING.PDK.JAVA.V2.HTML
and to pass parameters and events
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/OVERVIEW.PARAMETERS.EVENTS.HTML
Hope this helps,
Candace

When I open a link from another website ForeFox puts a messagge at the top of the new link saying that it has blocked the websiste from transferring me to a new

When I open a link for another website Firefox opens a new tab but puts a line on the top of the new page saying that Firefox has blocked the website from transferring me to another page.
I have to press ALLOW before Firefox will open the new page.
How can I solve this problem.
Many thanks in advance.

hello betth007, in order to get effective help, please open a new question at https://support.mozilla.org/en-US/questions/new instead and include a bit more details about your issue (what kind of error message are you getting, etc.). thank you!

How to create hyperlink in a page with another website

like we can link email links and hyperlinks (with other
files) how do i make link with another website like
in my home page i say www.indiatoday.com and i want that when
one clicks on www.indiatoday.com this site opens
how do i create a link using dreamweaver without having to
code manually.

"pandeya" <[email protected]> wrote in
message
news:f66jl8$72b$[email protected]..
> like we can link email links and hyperlinks (with other
files) how do i
> make
> link with another website like
> in my home page i say www.indiatoday.com and i want that
when one clicks
> on
> www.indiatoday.com this site opens
> how do i create a link using dreamweaver without having
to code manually.
Select the text www.indiatoday.com. In the Property
Inspector, in the Link
field, type the full URL -
http://www.indiatoday.com.
Click OK.
You might want to use the Help documentation for really basic
questions like
this..
Patty Ayers | Adobe Community Expert
www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Can you link to another website in iWeb?

Hi everyone,
Is there a way in iWeb to use a page to navigate to another website i.e. Blogger?
Many thanks!

I'm sure it can be done in iWeb :
Add a link to the navbar
<script language="JavaScript" type="text/javascript">

</script>
Or use the method on this page :
     http://www.wyodor.net/mfi/global/
Or use this code :
<script language="JavaScript" type="text/javascript">

</script>
See it here :
     http://www.wyodor.net/mfi/ipad/Welcome.html
More custom menus here :
     http://www.wyodor.net/mfi/

Redirect to another website when I share my Network

Hi,
When I am with my friends, I often share my network for they can connect to my 4G.
But I have not an unlimited data. So, when they go on Youtube for exemple, I wish they are redirected to an another website.
I have thinked to modify the hosts file in /etc/hosts but it is not working.
How can I do that ?
Thanks

It won't work. You just have to pay your wireless carrier for tethering.

Display from another website

Hello all,
I need to display a page from another website in my jsp. I'm using Sitemesh to build the header, footer and layout of the page, but I need to bring a page from another website to display in the body. I have searched the internet and haven't found any good posts/articles/tutorials/ect. on the subject. Could someone please point me in the right directions.
Thanks,

Use a tool that gets data from a URL then sets a JSTL tag. You can use the tag then to place the new content. Please only do this if the site belongs to you. This will be frowned at if not.
Simple class to get a URL
package uk.co.classfinance.curl;
import java.io.DataInputStream;
import java.io.DataOutputStream;
import java.io.IOException;
import java.io.UnsupportedEncodingException;
import java.net.URL;
import java.net.URLConnection;
import java.net.URLEncoder;
* Grabs data from an URL after passing parameters in a POST or GET request
* @author Garry Taylor
public class WebFetch {
     private String Url;
     private String Method;
     private String Response;
     private String PostData;
     public WebFetch() {
          this.PostData = "";
          this.Method = "POST";
     public void setUrl( String value) {
          this.Url = value;
     public void setMethod( String value) {
          this.Method = value;
     public String getUrl() {
          return this.Url;
     public String getMethod() {
          return this.Method;
     public String getResponse() {
          return this.Response;
     public void setPost(String name, String value) {
          String prefix = "";
          if( this.PostData.equals("") ){
               prefix = "";
          } else {
               prefix = "&";
          try {
               this.PostData += prefix + name + "=" + URLEncoder.encode (value, "UTF-8" );
          } catch (UnsupportedEncodingException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
     public String getRequest() throws IOException {
          URL url;
          URLConnection urlConn;
          DataOutputStream printout;
          DataInputStream input;
          // URL of CGI-Bin script.
          url = new URL (this.Url);
          // URL connection channel.
          urlConn = url.openConnection();
          // Let the run-time system (RTS) know that we want input.
          urlConn.setDoInput (true);
          // Let the RTS know that we want to do output.
          urlConn.setDoOutput (true);
          // No caching, we want the real thing.
          urlConn.setUseCaches (false);
          // Specify the content type.
          urlConn.setRequestProperty
          ("Content-Type", "application/x-www-form-urlencoded");
          // Send POST output.
          printout = new DataOutputStream (urlConn.getOutputStream ());
          String content = this.PostData;
          printout.writeBytes (content);
          printout.flush ();
          printout.close ();
          // Get response data.
          input = new DataInputStream (urlConn.getInputStream ());
          String str = "";
          String result = "";
          while (null != ((str = input.readLine()))) {
          System.out.println (str);
          //textArea.appendText (str + "\n");
               result += str + System.getProperty ( "line.separator" );
          input.close ();
          return result;
}

My computer is clean, bug-free, with the most current updates on AdBlock & Firefox, yet I still get rollover ads and "fake" links embedded into websites:( Help!

I have Firefox 18.0, AdBlock 2.2.1, am up-to-date on my Windows 7, have no bugs nor viruses, but still there are "fake" hyperlinks embedded in websites. Also, rollover ads are making a presence again. Any suggestions? Tweaking the Java settings doesn't help. I haven't done Flashblock it blocks a lot of my work crud, but would be willing to deal with that annoyance if someone feels that it would be the resolution to my problem.

There are a lot of IntelliTXT like ''ad'' pop-ups possible.
If your current Adblock Plus filter settings aren't blocking some pop-ups then it is best to take this to the Adblock Plus forum.
* https://adblockplus.org/forum/
* http://en.wikipedia.org/wiki/Category:Internet_advertising_services_and_affiliate_networks
* http://en.wikipedia.org/wiki/IntelliTXT

Embedding another website [was: Website]

Similar Messages

Maybe you are looking for