Embedding avi video clips into timeline of Flash Basic 8

Trying to add avi video to timeline along with jpeg files. In
doing so the video does not play back properly but instead slowly
progresses frame by frame at the same rate as the jpeg files. What
do I need to do in order to embed the video and have it play back
as a movie?

Thanks Rob for the quick feedback. I'll be traveling for a
week and will then try your suggestion when I return.
Butch Ray

Similar Messages

How do I insert a video clip into the timeline?

Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
I don't want to render the whole movie (convert it into a MPeg2) each time.

No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

How to insert a video clip into a timeline ?

Premier Pro CS7 how do I insert a video clip into the time line ?

Hi Chris Micha,
Welcome to the forums.
Please import the clip in the project panel, right click on the clip and select new sequence from clip option, you can also drag the clip to new item icon at the bottom of the project panel to create a sequence.
Regards,
Vinay

Importing video clips into slide shows

I often insert video clips into slide shows. They mix nicely with pan and zoom still photos. However, the type of video clips that can be inserted is very restricted. Why is this?
Elements can deal with a wide variety of video formats but, as far as I can see, only AVI and WMV videos can be imported into slide shows. Compact digital cameras typically use AVI, MOV and MP4 formats. My camera produces MPG videos, which I cannot import. I have to convert the clips into AVI format and reimport these into Organiser etc - which is very fiddly. I am considering buying a new camera that produces AVI video clips as standard.
Why is the choice of video formats so limited? I cannot find a list of allowable formats on the Adobe site.

Hi David
Thanks for this. I tried that, but again, Streamclip only imported content from the first clip, ignoring the rest...on further inspection, all the VOB files were sub-divisions of the the first item (in essence, the system had chopped up the first recording into sections and formatted them as VOB files, but failed to do that for the remaining content of the DVD).
I booked an appt with a Mac Genius today and he downloaded Handbrake and this appears to be the way forward - you can isolate any of the content from the DVD, and save into either avi or mp4 files. I currently don't need Streamclip, since after my selection's been saved unto the desktop it can be dragged into iMovie and edited from there. I'll be keeping Steamclip though...after all of the aggro, it seems to good to be true!
Thanks again for responding to my query. Really appreciated that you took the time.

Is there a way to copy referenced video clips into the iMovie library?

When I import video clips into an iMovie event it seems that iMovie uses only a reference to the file. When files are moved things get horrible broken soon. I noticed that iMovie does actually copy video clips into your library when you convert your library from iMovie'11 to iMovie'13. Is there a way to copy video clips into the iMovie library when importing them so that they don't get lost?

http://support.apple.com/kb/PH14747

Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the online.

Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the only one.

Use the search feature and type in Flash and there are like thousands of posts on this.
You seem to think you are addressing Apple with your post. This is a user forum and we are all users just like you.

Import video clip into Photoshop

Seems when I attended an Adobe NAB seminar they said that it is possible to import a video clip into Photoshop to use tools, like clone, to remove objects from the clip. Is this possible and if so, is there a tutorial outlining the process. Thanks,

Thanks Jim,
Went there and could not find a clip amoung the numerous ones available. Great resource by the way. I used many combinations so search words and nothing came up. Can you give me the search words I need or do you have a title for the clip? This will help me navigate that site and get to the meat of what I need. Thanks,

Please help: Why JMF does't play .avi video clip?

The player doesn't play .avi media file, or plays sound only, but it works fine when palying .mpg files, anything I need to pay attention to when using the following code to generate a player to play video clips?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import javax.media.*;
public class PlayClip extends JFrame {
//singliton design pattern
private static PlayClip instance;
protected Player player;
private File file= new File ("goal.avi");
private PlayClip () {
instance=null;
initComponents();
public static PlayClip getInstance(){
if (instance==null)
instance=new PlayClip ();
return instance;
private void initComponents() {
JButton OK = new JButton ("OK");
OK.addActionListener (
new ActionListener () {
public void actionPerformed (ActionEvent e) {
player.close ();
instance = null;
dispose();
getContentPane ().add (OK, BorderLayout.NORTH);
setSize (300, 300);
show ();
createPlayer ();
/** Creates new form PlayClip */
private void createPlayer () {
if (file == null) {
return;
removePreviousPlayer ();
try {
//create a new player and add listener
player = Manager.createPlayer (file.toURL () );
player.addControllerListener (new EventHandler () );
player.start (); //start player
catch (Exception e) {
JOptionPane.showMessageDialog (this, "Invalid file or location", "Error loading file", JOptionPane.ERROR_MESSAGE );
System.exit (1);
private void removePreviousPlayer () {
if (player == null )
return;
player.close ();
Component visual = player.getVisualComponent ();
Component control = player.getControlPanelComponent ();
Container c = getContentPane ();
if (visual != null)
c.remove (visual);
if (control !=null)
c.remove (control);
private class EventHandler implements ControllerListener {
public void controllerUpdate (ControllerEvent e) {
if (e instanceof RealizeCompleteEvent ) {
Container c = getContentPane ();
Component visualComponent = player.getVisualComponent ();
if (visualComponent != null)
c.add (visualComponent, BorderLayout.CENTER);
Component controlsComponent = player.getControlPanelComponent ();
if (controlsComponent != null)
c.add (controlsComponent, BorderLayout.SOUTH);
c.doLayout ();
}

JDunlop,
thanks for your quick reply to my java.sun.com forum posting! i just got back from vacation, so i didn't get a chance to try your method til now. i pulled your email address off the website to update you on my problem playing an avi file in JMStudio (JMF).
as per your instructions, i downloaded the divx player at www.divx.com and tried to play the avi file. this is the error the divx player gives:
Divx Player 2.1
The file contains unknown video data
The file contains the following type of data:
Video data: FOURCC code "MP42"
You may need to install a new video codec on your computer to watch this video
Some quick questions:
1. Where could I find the "MP42" codec to play my avi file in JMStudio (JMF)? Does java.sun.com have video codecs?
2. You mentioned in your posting "If you don't have the one that was used in the encoding, your out of luck." Does this mean that I need to know how the avi file was originally coded and have the original codec to decode (play) it?
Thanks,
lac410
P.S. If you need more Duke Dollars for your help, I'd be happy to award them to you.
Re: Please help: Why JMF does't play .avi video clip?
Author: JDunlop Jun 5, 2003 5:00 AM
sounds to me like you are missing a video codecs. If you don't have the one that was used in the encoding, your out of luck. Download the player from divx.com, it will tell you which codecs the video needs (if it won't play). You can then search the net for that particular codecs.

Can`t left click and drag clip into timeline..Need advice

Can`t left click and drag clip into timeline, or drag clips around in timeline.
Can insert into timeline from Source Window but can't drag from source window.
Can cut and paste within timeline.
Restarting cs5 doesn`t help, but restarting computer solves problem for a while.
Tried many mouses, but that didn`t help.
Have no idea how I got the name OLD PRO, must have been drinking champagne years ago, because I am a bumbler par excellence!
Message was edited by: old pro

Thank you so much for asking
In the Project Panel a left click highlights the asset but ignores the drag.
In the timeline, a left click highlights the panel and when I try to drag it gives a flicker but that's all.
I can cut and paste in the timeline.
A restart of CS5 has no effect. Restarting the computer solves the problem for a while.
Four different mouses--same problem.
Doug

I can not drag clips into timeline with adobe premiere CC

I can not drag clips into timeline with adobe premiere CC, I created a sequence and still does not work

See if this works... 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153

When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other. This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

How do i put Video clips into Imovie, Without Iphoto?

Im using Imovie for a school project, and i need to put video clips into it. But for some reason my mac doesnt have Iphoto, and i've read online that the only way to do this, is through Iphoto??? Does anybody know otherwise?? please help!!

If you have a supported camcorder or camera you should be able to import your video directly to imovie from the camera. If the video is already on you computer, select the imovie File menu, then select import to library and navigate to the movie files you want to import. The article below should help you
http://support.apple.com/kb/PH2114

How to combine video clips into one video clip using FCPX

I typed this into the search engine but could not come up with anything. How do you combine Video clips into one Video clip using FCPX? Thanks in advance.
Gar

The simple answer is to put the clips together in a project in the desired order and export (oops, the new word is share [YUK!]) a master file.
But maybe you should say a little more about the clips to determine whether the answer I've given is relevant to yor situation.

How do I get video clips into Organizer from Elements?

I have broken my raw video into pieces in elements but can't get it to import into organizer.
I am using Elements 11 Trial.

The video is actually a football highlight film for our son and came to us as a single mp4 file with about 60 plays of video on it.
What I am trying to do is
1) Cut it down into 60 individual videos (which I did and currently have in my project).
2) Save the pieces off as individual video clips.
3) Get the ability to rank/rate each video and select the 25 or so that will make up the final video.
4) Polish/edit those that make the grade.
5) Organize and assemble.
Does this make sense?
t
Date: Mon, 19 Nov 2012 14:44:31 -0700
From: [email protected]
To: [email protected]
Subject: How do I get video clips into Organizer from Elements?
    Re: How do I get video clips into Organizer from Elements?
    created by whsprague in Premiere Elements - View the full discussion
karaannmbb wrote: I have broken my raw video into pieces in elements but can't get it to import into organizer. I am using Elements 11 Trial.Place the "Work Area Bars" (located on the time line) so that only a "piece" is covered. Then "Share" to a computer file. Pick a file type that suits your needs. Be sure to check the box titled "Share WorkArea Bar Only". Unfortunately, the clip piece will be re-encoded. PrE11 will do that well, but not perfect because any encoding always seems to loose a little. You did not say what camera you are using. The software that came with my Sony and Panasonic camcorders is much better for splitting clips into smaller clips. Some sort of magic is in them where re-encoding does not take place. The pieces have the same picture quality as the original.   So, when I do what you want, I break it into pieces with the camcorder software, the put the video together in PrE with all the creative tools it offers. Bill
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4859754#4859754
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4859754#4859754
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4859754#4859754. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Assembling still photos and video clips into one video presentation.

This is partly a Photoshop Elements and Premiere Elements (both version 7) question, so hopefully not posting to the wrong group (there doesn't seem to be a Premiere Elements forum anyway)!
I am currently putting together a video/slideshow presentation, initially for display directly from a computer (to data projector) and then ultimately to end up on a DVD. The presentation consists of digital and scanned photographs (prints and transparencies) and video clips. I successfully put together a slideshow of all the stills with Photoshop Elements, inlcuding music etc. I then output the slideshow to Premiere Elements, so that I could merge it with my already edited video clips.
The output process works smoothly enough, but as soon as I run the completed presentation, the quality of the imported slideshow is nothing short of woeful! Each image is badly pixellated and all the transition effects are mangled - in short, it is unwatchable. As it turns out, simply adding a single, still image to Premiere Elements results in a very poor final image. Drop the exact same video clips and still images into Windows Movie Maker and the quality is spot on (as is playing the slideshow after outputting it as a WMV file and playing via any player capable of playing WMVs).
Trying to go the other way, ie importing video clips into Photoshop Elements, pretty much always results in it crashing!
The two products are marketed to "work together", but they are an abject failure in this regard!
OS is 64 bit Vista Ultimate.
I've tried searching the manuals and online help, but could find nothing of any help. I've sent an e-mail to Adobe support, but have received no response from them (after three weeks).
I'm hoping that someone may be able to point out something that I may have missed, or offer some tips and tricks.
Thanks.

There is a separate forum for Premiere Elements at
http://forums.adobe.com/community/premiere/premiere_elements
Also, my favorite place for Premiere Elements questions (including slideshows) is a site started by some Adobe Premiere Elements forum regulars at http://muvipix.com/phpBB3/index.php Forum signup is free. There are multiple subforums at that site and because most of your questions are Premiere elements, I suggest that you post under the "PE version 7" subforum.
Wherever you decide to post, I suggest that you include in your post my comments and the answers to the questions that I asked here.
1 -- It has FAQs over to the right of the thread listing on the Adobe Premiere Elements forum. One of those FAQs that is relevant to your current workflow is
What resolution should my photos be in Premiere Elements?
http://forums.adobe.com/thread/431851?tstart=0
2 -- Also, I suspect that you used Pan and/or Zoom on some of your photos when creating the Slide Show withinn Photoshop Elements.
For those photos, you want the Premiere Elements setting of Scale to Framesize set OFF.
3- There are also other considerations such as
-- which Project Setting you are using in Premiere Elements?
-- what dimensions are you using when you export from Premiere Elements to the WMV file?
-- what is the resolution for the projector on which this video will initially be displayed?
4 -- I do agree with your approach of adding the video in Premiere Elements.
5 -- The mangled transitions needs more detailed info in order to discuss.
Tthe timing of transitions is definitely different between the Photoshop Elements slideshow editor playback and the Premiere Elements output: this gives some people serious problems and for others it is not significant. I don't know yet if that is your problem.

Embedding avi video clips into timeline of Flash Basic 8

Similar Messages

Maybe you are looking for