Embedding fonts in an existing pdf that does not have the fonts embedded

Hi,
I have an existing pdf that fails to open on my ereader.
So I opened in acrobat x pro to see what might be the cause.
Selecting "file"--> "properties" -->"font" ( fonts used in this document) I can see that this pdf uses multiple windows trueType fonts and that none of them are embedded in the pdf document.
Now my ereader is linux bases, so I am guessing this might be a problem.
Being an ereader I didn' give me much to go on.
So i would like to embed all the fonts listed in this list into the pdf file and save it again with the fonts embedded.
I went to "file"-->"save as optimized pdf" -->"font"
But there both lists embedded and unembedded fonts are empty.
Why is this and how can I embed the fonts shown in the document properties into the pdf?
They seem standard windows fonts like e.g.  ArialNarrow

I just looked a bit furder and actually checked wether the fonts existed and found the following:
I am using windows vista.
The fonts mentioned in the properties of the pdf actually exist in the windows installed fonts but
in windows they are no longer TrueType but OpenType.
So I am guessing this might be the reason they are not in the list of unembedded fonts in the optimizer window.
Is there an easy way to say to acrobat to replace one font ( not found on this computer) with another font that does exist and also to embed that font in the pdf document?

Similar Messages

  • HT4623 how can i update my iphone 4 that does not have the update option in the settings?

    How can i update my iphone 4 that does not have the update option in the settings?

    From the article you linked, scroll down to the section "Update your device using iTunes"

  • HT4623 I have an Iphone 3 that does not have the software updates how can I update it?

    I have an IPhone 3 that does not have the software updates in my settings how can I update it cause I can not download any apps or games?

    The 3G can not be upgraded beyond 4.2.1, but if the phone isn't there yet, see below.
    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • How do you delete a picture that does not have the trash can icon to do so.

    I Am trying to delete a picture and it does not have the trash can icon. 

    You have to sync it off of the device using iTunes. That is likely how it got there in the first place.
    See:
    http://support.apple.com/kb/HT4236

  • Creating a copy of an existing JTable that does not have source code.

    Hi
    I am working on a java swing based application. We used a third party API for JTable for showing some data in a table format and also for printing function. As of now print button is printing the whole table being shown in the application. Our new requirement of printing is �Users don�t want to print all the columns being shown in the application and they wanted to have print of columns whatever they would like to see�.
    The above requirement can be fulfilled if I can have a copy of the existing table. Unfortunately we don�t have the source code of the table being shown in the application as we are using 3rd party libraries. Had the source code been there I could have implemented cloneable interface or proto type pattern.
    Can some body help me how can I create a copy of the existing table? Basically the high level approach I thought of is create a new object of the table class and copy the properties/attributes of the existing table to the new table object. But I don�t know what attributes should be copied so that I can have the copy of the original table and how to construct (code) this new table.
    I would be very grateful if some one could help me with this.
    Thanks & Regards
    Srini

    I understood your suggestion. But it would be very difficult to migrate as it requires lot of changes across different tabs of the existing application. This application was developed around 6 years ago. And this change would require lot of regression testing too.
    Do you have any idea of creating the copy of the available JTable object?

  • SKYPE INSTANT MESSENGER FROM AN ANDROID THAT DOES NOT HAVE THE SKYPE APP

    I HAVE A LENOVO HARD-WIRED TOWER & WINDOWS 8.1 OPERATING SYSTEM. MY FRIEND, DAVE, HAS AN ANDROID PHONE - HIS PHONE DOES NOT HAVE SKYPE INSTANT MESSENGER, BUT ANOTHER INSTANT MESSENGER THAT SHOWS A LIGHTNING BOLT. DAVE IS ONE OF MY SKYPE CONTACTS. WHEN I SEND DAVE MESSAGES VIA SKYPE INSTANT MESSENGER, HE CAN SEE MY MESSAGES, BUT I CAN NOT SEE HIS. ANY SUGGESTIONS, ADVICE? THANK YOU. SIGNED, GINA

    Hi! The obvious solution to this would be having your friend download skype from google play store. that way you're both on Skype, and it's free aswell. https://play.google.com/store/apps/details?id=com.skype.raider  

  • Unlock a FM file that does not have the Read-only attribute?

    I have FrameMaker 8.0p277. I was trying to import formats from a file on my network. Everything froze. I had to reboot. When I reopened my FM book file and the individual chapter files, I got the lock message that prompted me to reset the lock and open each file. I did that--opened each file and reset the lock in each file. However, when I go to update my files, I get a message that one of my files is read-only. The attribute settings does not say this. I also can't even click in this file any more. I tried removing it from my book file and adding it back in. But that didn't change anything. Is there a way to get this file unlocked again?

    This happened to us once.
    Be sure you are pressing the keys sequentially, except for F, that is:
    Esc
    Shift+F
    l
    c
    Except for Shift+F, do not press all the keys at the same time.

  • Anyone on T-Mobile UK that does NOT have the iPhone 4S battery drain

    Hi,
    Just wondered if anyone is out there who is on the T-Mobile network, and is not having battery issues with the iPhone 4S?
    Every SIM card from T-Mobile I tried in my phone gives me the drain.
    SIMs from other providers (so far, O2 and Three) appear to be fine (i.e. they FIX the battery drain problem).
    Even had T-Mobile replace my SIM, to no avail.
    Just wondering if it is the type of SIM they use?
    Please leave a note if you are on T-Mobile, and whether you have the problem or not.

    I thought it wouldn't be that, but I don't understand why when I put a SIM from another provider in, the drain immediately stops, and the phone works normally.
    I have tried completely factory restoring my phone, and not putting anything onto it, just using it on its own, with the SIM in it.
    The drain is still there, which suggests it isn't a problem with the settings for me.
    Flight mode doesn't help - drain still there. Removing SIM fixes it instantly, or, as I say, using a SIM from a different provider. This is really strange.
    Unfortunately I am tied to a contract, and can't switch providers at the moment...

  • How do I create a stand-alon​e execute out of my teststand sequence? I need to run the execute on a computer that does not have the tesstand applicatio​n installed on it.

    I would also like to use the teststand basic gui window wich asks for the serial number and then runs the tests without seeing the teststand environment in the background
    ie I would like the test to look simple to the user without building a new gui.
    Sincerely
    Aik Lewin

    Hi,
    You will need to use the Run Engine Installation Wizard found on the Tools menu. In addition you need to create a installation set for the operator interface.
    Look at Chapter 16 Distrubuting TestStand ( chapter 17 for version 2).
    Once you have created your installation, install is on your new system.
    The serial number etc is part of the process model. When you run the entry point 'Test UUTs' the PreUUT callback is executed which asks the user for the serial number.
    Hope this helps
    Ray Farmer
    Regards
    Ray Farmer

  • How to import iDVD app from Time Capsule to my new iMac 21" that does not have iDVD?  I can find the iDVD app in the Time Capsule, then what?

    I have a new 21" iMac to replace a 6-year old iMac 24.  My Time Capsule has the iDVD app saved (?) and I can find it, but I can't figure out how to move it to my new iMac that does not have the app.  How to do this?

    You are probably better to install it from ilife disk.
    Can't Find a update or latest Version of iDVD to Download or a Compatibility to Yosemite

  • How do I install photoshop CS5 on my imac that does not have a DVD drive

    I have photoshop CS5 and just got new iMac that does not have the DVD drive. I would like to avoid having to purchase the external DVD drive. Does Adobe offer options that I can still download CS5 that I have purchased on my new machine?

    Marin bortnem you can download the installation files for Photoshop CS5 at Download CS5 products.

  • How do I create an executable for a computer that does not have IVI drivers

    I'm creating an executable driver (based on the NI drivers) for a TDS 3054 intended for a computer that does not have the IVI engine. I would prefer to install as little software on this computer as possible. Is it possible for me to build the driver with the appropriate support DLL's without installing IVI on the user's computer? How do I do this?
    Thank you,
    Zach Oberman

    Zach,
    Since the tkds30xx driver you are using is IVI based, you will not be able to use it without the IVI Engine.
    If you must build an executable that does not require the IVI Engine, then you will need to use a traditional LabVIEW driver or convert a VXIpnp driver into LabVIEW. Neither of those drivers would require the IVI Engine.
    At this time the only TDS 3054 driver on NI's IDNet website is the IVI-based tkds30xx driver.
    You may be able to obtain a traditional LabVIEW driver from
    Tektronix
    Developer Exchange
    Requesting a
    driver
    Other Resources
    Thanks,
    --Bankim

  • HT4519 how do i delete an email account? The one i want to delete is the only account that does not have a "delete" red bar??

    I have 6 email accounts on my iPhone 6 and want to delete one that is set up incorrectly. It is the only account that does not have the red DELETE bar...what do i need to do to delete it?
    It is hosted by GoDaddy, is this the problem?

    Thank you so very much! That was just what I needed to do, problem solved.

  • Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

    Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
    - Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
    System: PC Windows 7 using Acrobat X Prof. - Thank you!

    Hi ,
    There is an option of embedding index for faster search while converting email to a PDF .
    However I am not sure that will serve your purpose or not .
    I would recommend you to get in touch with Microsoft support as well .
    Meanwhile I'll work on it and get back to you in case I get a desired solution .
    Regards
    Sukrit Dhingra

  • Since I have Yosemite on my iMac I can't view PDF files in Safari anymore.  It keeps telling me to upgrade my Adobe Reader, but it is the latest version.  Please help?  I don't have this problem on my Macbook that does not have Yosemite installed.

    Since I have Yosemite on my iMac I can't view PDF files in Safari anymore.  It keeps telling me to upgrade my Adobe Reader, but it is the latest version.  Please help?  I don't have this problem on my Macbook that does not have Yosemite installed.

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
              Safari ▹ Preferences... ▹ Security
    and check the box marked
              Allow Plug-ins
    Then click
              Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
              Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Maybe you are looking for