Embedding fonts in Keynote file for use on iPad

Is there any way to embed fonts into a Keynote file so they're usable/displayable on Keynote on iPad?
Or, is there a way to download fonts to the iPad?
I'd hate to have to recreate all my presentations with "stock" fonts.
Thanks in advance!
t

Is there any way to embed fonts into a Keynote file so they're usable/displayable on Keynote on iPad?
No.
Or, is there a way to download fonts to the iPad?
No.
You can tell Apple what you need here:
http://www.apple.com/feedback/keynote.html
http://www.apple.com/feedback/keynote_ipad.html

Similar Messages

Converting .avi files for use on ipad without using a laptop

Hi, I have a head cam (for use on the slopes and on my bike) that records .avi files to an sd card. I was wanting to know before I buy the sd connector for the ipad if there is any easy way (I appreciate that there are some complicated ways) to convert then edit the video with a movie editor. I was thinking about buying iMovie but I understand it doesn't recognise .avi files so would need to convert them beforehand - I don't intend to take my laptop though so need to do it all on the ipad - qu therefore is can it be done, in a simple straightforward way, with full knowledge that I am not a techie ?

Here is an article that will help you and has links to some software to help convert your wma files to a usable format.
http://www.everymac.com/systems/apple/consumerelectronics/ipodfaq/ipod-supported-music-formats-good-sound-quality.html

Embeding Fonts from TTF File

Hi,
I had a very basic question on using Embeded Fonts in SWF files.
I have to use a Italic effect on a Arail Font text, for this should I use ARIAL.TTF and apply the italic effect on it or Should I go for ARIALI.TTF file?
What is the difference and which is the correct way of doing it?
I am acutally working on a PPT to SWF converter and I am not able to match the look at feel of the Italic or Bold fonts in PPT and SWF, any suggestions where I should look for help on understanding how fonts are used?

Hi Peter,
     Thanks for your reply.
     I did some experimentation and found that I can embed the Arail.ttf file and apply FontStyle=Italic property in my MXML tag and it shows me a italic form of Arail font. But when I try to use the same embeded font using FontRange and specify FontStyle = Italic in font range the italic font is not shown on the UI. Why is there a difference in MXML and Font Range ?
     I understand that I should use ARIALI.TTF file for Italic fonts but the problem is that it increases the size of my SWF. And even if somebody has used a italic style for couple of words it increases the size significantly. I want to avoid that.
     Can you tell me why FontStyle on normal Embede font work from MXML and not from FontRange?
-Saurabh.

Converting M-peg 2 files for use in i-movie

What is the best (easiest and cheapest) to use programme when trying to convert M-peg 2 files for use in i-movie? I have just bought my i-mac and was assured by seller in Apple store that it would be 'really easy' to upload files from existing camcorder. How wrong he was!
Help appreciated. Thanks.

Never had to do this myself. However, if your Windows PC and the Mac have the same version of PM such as PM7.xx, then you should be okay. You'll need to sort out your fonts though as I think the Mac can open PC TrueType founts but Windows cannot handle Mac TrueType. OpenType are cross platform. Hope this helps.
Ian

Problem exporting FXG file for use in Flash

I have a simple rectangle with a 3D-bevel effect built in Illustrator that I need to export as an FXG file for use in Flash.
When I export from Illustrator to an FXG format, it creates bitmaps and embeds those in the FXG file.
if i import directly into Flash CS5 there are transparent gaps (and the symbols created are very complex), and it warns me that the objects aren't compatible with flash and they should be converted to bitmaps first.
Is there a way to export the object to an FXG file and keep it in a vector format?
if not, and this may be an Illustrator question, is there a way to create the same kind of effect so that I can get an end FXG object that will work in Flash?
An example of what I am seeing is posted here: http://idg-partners.com/flash_issue.html
Thanks in advance.

Is there a way to export the object to an FXG file and keep it in a vector format?
Create the bevel edges as separate objects with gradient fills. not sure why you need AI, though. You can do that jsut the same directly in Flash...
Mylenium

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

___ How do I convert an Ai logo to a .dst file for use in embroidery?

___ How do I convert an Ai logo to a .dst file for use in embroidery?
Is there an easy way?
Thanks,
Hugh

Like so perhaps:
http://www.embroideryi2.com/adobe
Took 5 seconds to search on Google.
Mylenium

How do I share an iMovie file for use on 1st or 2nd generation Apple TV

How do I share an finished imovie file for use on 1st or 2nd generation apple TV?

I shared my finished movie in I Tunes but it doesnt show up on my Gen 1 apple tv or my gen 2 Apple TV. The sharing process indicates that the movie is compatable with gen 3 Apple TV.
Carl

Jar files for using BRM API's

Hello,
I am not able to locate the Jar files for using BRM API's. I have tried searching the forum and did not find the name or location from where I can get them. If they are available on the server I could ask the basis team to give me a copy. Any help would be greatly appreciated.
Regards
Preetam

Hi Adam,
I have created a New EJB Project for my proxy development. This is the usual way I develop proxies for any given service interface created in ESR. Now i am not sure how to create a dependency with the BRMS facade. If i find the jars i can add it as an external library when compiling.
Can you explain a bit more about what you ment by "developing the java proxy in a development component", how did you accomplish this when creating a proxy for a service interface?
http://help.sap.com/saphelp_nw73ehp1/helpdata/en/e2/3620cef55842cca4632664212f31b1/content.htm?frameset=%2Fen%2F81%2F097529e0e545e58bb2d7a34e4d0a2a%2Fframeset.htm

How do you convert .AVI files for using in iMovie without losing the original clip time and date

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Could someone please recommend the best program to convert AVI and MPEG files for use (and exporting) into IMovie 11?

Hi - I understand I need to convert AVI and MPEG files for use within IMovie 11. I have one particular file that has a watermark stating "Created with Flip4Mac WMV Demo". Can someone please recommend the best program for a novice? Thanks!

Hi Susan,
It is no simpler converting vobs to mp4 than mpg (mpeg2).
There is *always* a loss of quality converting video from one lossy-compressed format to another, e.g. mpeg2 to mp4.
So, if you want to not lose any quality, then converting vobs to mpeg2 (mpg) is the thing to do (since there will be no video/audio re-compression), assuming Lr5 will accept them (sorry, but I do not know). example commands:
Mac: ffmpeg -i myvideo.vob -sameq myvideo.mpg
Win: ffmbc -i myvideo.vob -sameq myvideo.mpg
If Lr5 won't accept them, then you can convert to mp4 with minimal quality loss using a command like:
Mac: ffmpeg -i myvideo.vob -sameq myvideo.mp4
Win: ffmbc -i myvideo.vob -sameq myvideo.mp4
You may need variations of these commands depending on encoding of vob.
Note: -i means -input-file; -sameq means -same-quality, as much as possible.
ffm... is smart enough to avoid re-encoding, if possible, when -sameq is used, and makes reasonable choices for audio/video codecs based on extension of output file.
Of course, you'll need to download/install ffm... program if not already on your machine, and execute commands in a terminal or command window.
Do keep us posted please .
Cheers,
Rob

How to import WMV file for use in adobe programs, especially After Effects and/or Premier?

How to import WMV file for use in adobe programs, especially After Effects and/or Premier?

I have the latest adobe creative cloud and i'm using Mac 10.8.2
My client gave me a wmv file that she wants some people blurred out in the background but when I go to import the media, it's greyed out. I'm assuming that After Effects will be the best solution for this, but maybe there is another way.
I can purchase a video converter and convert it to .mov but that costs extra money that I don't want to spend just to do this one project.

Converting VOB Files For use in FCP

Hello,
I have a large FCP project using VOB files shot on a DVD Recorder.
I have been been using a freeware called MPEG Streamclip to convert them into Quicktime Files for use with FCP7. The resulting QT files have all been very choppy when used in the FCP Timeline etc.
I have options with this freeware to convert to MPEG, TS or export to Quicktime, DV, AVI, MPEG4 or other formats.
Any suggestions on how to bring these VOB files into Final Cut Pro so that they work well.
Thanks,
Marc

Nick's tutorial is good. Read it.
I had been using Cinematize for this but would always have trouble with the aspect ratio.
With MPEG Streamclip I have no problems if I do it this way:
Export to QuickTime
Change Compression to: Apple DV/DVCPro-NTSC
Quality: 100%
Frame Size: 720x480 (DV-NTSC)
Sound: Uncompressed (the default)
Make Movie
I do a preset of the above.
Now, when you take that resultant file into FCP:
In FCP make sure your sequence set-up is DV anamorphic (if footage is anamorphic/16:9). When you bring that file into FCP it will not be flagged as anamorphic. In the browser scroll over and check mark it as anamorphic. NOW drag into the timeline. Aspect ratio is good if you do it this way.
Sharon

Convert vob files for use in FCP X

I need to convert VOB files for use in FCP X on my macbookpro in OS X Lion (10.7.5) I use Clipwrap to convert other formats, but it does not seem to accept VOB for conversion (or if it does, I have not figured out how). In searching the web, I've come across several products that tout themselves as the best, fastest, easiest VOB to Prores converters etc., some that advertise as "free" when actually only a watermarked trial version is free. I have no idea of the actual quality of any of these (some examples are Brorsoft video converter for Mac, and Acrok HD Video Converter...), and would like some input from folks w/ experience in these things before dropping $ on the problem.
In another thread on this site I read something about MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing and I couldn't tell if it applied to my situation or not...
Thanks in advance for any light anyone can shed.

Midnighttrain wrote:
… MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing …
MpegStremclip is THE Swiss Army Knife, when it comes to conversion, a 100% reliable, it IS absolutely free (any download a dollar = Stefano would be a millionaire!), I dare to say it is THE most recommended 3d party tool in the editor community ....
How & why you need to install the mp2 plug-in does Signore Cinque explain in simple words on his website:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html

Can an InDesign page be saved as a jpg file for use in Photoshop CS5 ?

Can an InDesign page be saved as a jpg file for use in Photoshop CS5 ?

mckayk_777 wrote:
Just wondering peter what you think, instead of output to pdf you copy and then create create new file in photoshop and paste into that file. Is that sort of the same thing?
Seems to be ok especially if you enlarge the object before you copy it into photoshop.
I think what you are pasting (never bothered to try this) is just the screen preview, hence the need to enlarge. Why would you waste your time doing that instead of exporting to a high-res PDF?
If you want only part of the page, check out http://indesignsecrets.com/free-layout-zones-add-on-is-incredible-productivity-tool.php

Embedding fonts in Keynote file for use on iPad

Similar Messages

Maybe you are looking for