Embedding Fonts into a PDF file - Best Solution/s
Good day
What is the best solution or solutions to Embedding Fonts into a PDF file?
Kind Regards
Amplifing on what Test Screen Name posted.
--| Use a Distiller Job Option that embeds fonts.
--| Use Acrobat Pro's (starting with 9.x) Preflight that embeds fonts (if they are present and installed on the local machine).
--| Untick "Rely on system fonts only; do not use document fonts" in the Adobe PDF Document Properties dialog.
Be well...
Similar Messages
-
Rename embedded fonts in a .pdf file
Is it is possible to rename the embedded fonts of a .pdf file?
You can safely removed the system times and helvetica.
http://www.jklstudios.com/misc/osxfonts.html
If you use iCal, Mail and a few other Apple programs that use badges on the dock icon you will get a substitute font on the icon, but having another helvetica will fix that. You need 1 Helvetica of any type or Photoshop will not launch.
The only fonts you NEED in OS X are Lucida Grand (used in menus), Last Resort, and Keyboard. The rest can be deleted. Apple says you have to keep Kana, but if you aren't working in any Asian languages you can remove it without system instability. To be safe and follow Apple's guidelines you can keep it.
http://support.apple.com/kb/ht1642 -
Hi There,
I'm having trouble sending my files to the printers, my fonts is jumping...
How do i make sure that my fonts are embedded into my PDF file,
I'm using indesign cs5.5 Please can someone help me, I have distiller as well.
Thank You
Kind RegardsCan you check one of your problematic PDFs with Acrobat? Go to the Document Properties dialog and check the "Fonts" tab. That way you can verify if your fonts are embedded.
It's really straightforward: where Acrobat does *not* tell you a font is "(Embedded)" or "(Embedded subset)", that font is missing.
If you find you are creating files without embedding all fonts, you need to review your workflow. As I said above, you might have switched off InDesign's warnings for this.
Bear in mind it's also possible your PDFs are fine and it's your printer that needs to update. -
Embedding Postscript into a pdf file
I've been looking for a while for a solution to a problem I have. I want to be able to embed postscript code into pdf file. Is it possible to do this within acrobat or even some other solution?
Thanks!By "embed PostScript code", do you mean add a .ps file as an attachment?
You can do this with the Doc.importDataObject() method. -
Embedding files into a .pdf file
How do I embed files into a .pdf file? It worked in word but when I converted to .pdf format, I lost the ability to open the embedded file with a click...
Challenge no. 2 below Pat. Thanks!
Dave Janzow
Director, Business Development, Life Sciences
UNITRANS INTERNATIONAL CORPORATION
peace of mind > every time
[private information removed by moderator]
All business transactions are based on Unitrans Intl Corporation's terms and conditions, available on request.
Unitrans Intl Corp. is a certified member of C-TPAT (Customs Trade Partnership against Terrorism).
Our SVI number for Customs House Brokerage is: unibro00850.
Please refer to our website for further information on the C-TPAT program. -
Embedding extended XMP metadata into a PDF file
Hello.
I am preparing a thesis for submission into our library repository. They keep some additional information about the paper in a separate XML file which looks like: http://naca.central.cranfield.ac.uk/ethos-oai/2.0/uketd.xml
The metadata can be then easily harvested by other libraries etc.
Because the papers are downloadable and can freely circulate over the Internet I would like to also include the metadata into the PDF itself.
I've managed to extend the PDFX (MiKTeX) package such that it writes custom metadata in addition to the default fields (Author, Title, Subject, Keywords) into the PDF.
The problem is that the library metadata (see above) makes use of XSI schema which is apparently not compatible with RDF format of XMP.
Is there a way to get such rich metadata sets into a PDF file in a portable and accessible (thinking about search engines) way or should I stick with plain Simple Dublin Core?
Thanks for recommendations.You may want to repost this in the XMP SDK forum: http://forums.adobe.com/community/design_development/xmp_sdk
-
Cannot Embed font into InDesign PDF
I am on ID CS5 Win7 and when exporting to PDF smallest file size get this message. I bought the font form Comicraft and used it before In Ilustrator without probolem, but this is my first time using the font in InDesign.
Now I am just trying to send a pdf for client review, and can probably find a way to bitmap the pages font. My main concern will be how can I make a pdf-X for final printing?Mike Gondek2 wrote:
Comicraft replied back sayng that their fonts can be embedded. I believe my problem is that I converted the font to PC and Fontlab turned that option on by default for a .ttf font. Unfortunately looking into their liscening agreements I cannot convert their fonts to another platform, so will have to convert this ID file over to mac and work on my slower older mac system to finish off this client approved job.
I was surprised to find out that Comicraft allows
Once a design is approved for release I need to send this to a printer to print.
Can I?
Send a copy of a font to a printer only so they can image the file? This is what most all printers request, only very few accept PDF-X.
Embed the font into a PDF, and send the PDF?
Outline the font and send this legally (hate to do this cause file size gets so large, and occasionally I have them do small type changes).
RESPONSE: Any of those options are fine. If you send the fonts, please remind them to delete them when the job is finished.
thanks!
This probably differs per vendor, but wanted to share what I found out.
That's seems in direct contradiction to the information on the FAQ page. I did see on the site that they would sell you a version for the new platform for 20% of your original cost -- I'd opt to get an OpenType version. -
How do i convert a word file into a pdf file?
How do I convert a word document into a .pdf file?
Hi wertheca,
If you have Acrobat, (full version), you can convert a file to PDF by choosing File > Create > PDF from File. Then you choose your Word document, and click Open to convert the file to PDF.
If you don't have Acrobat, you can use an Acrobat online services subscription to convert almost any format of file to a PDF with just a click or two. For more information, see Acrobat Plus, PDF Pack, Export PDF & More | Acrobat Document Solutions
I hope this helps.
Best,
Sara -
How to embed the needed fonts in a pdf file
Dear Sir/Mam,
We had purchased licenced version of adobe acrobat x pro
We are facing issues while embedding the font in the pdf file
Please find the below mentioned requirement
Requirement:
We have a pdf file (template) with some static images and static text in it
We need to populate dynamic data in the pdf file for this we may use text boxes
We need to set the font name for the text box and embed that font in the pdf template (Eg:Font to be used in textboxes is "RotisSansSerif-Bold")
Queries
Please let us know how to embed the needed fonts in the pdf file?
Once user exports the pdf file, even if user doesnot have the fonts installed in his system the text need to be displayed in the same fonts,how to acheive this?Eg:if we define "RotisSansSerif-Bold" as font in the textboxes,after exporting the data the text need to be in the same font.
Note:
Fonts will only installed in the application server and not in the client system
The mentioned requirement need to work on below mentioned specifications
OS:Windiows-XP, Browser:IE
OS:Mac osx, Browser:Safari
Regards,
S.N.PrasadThere is a similar post just a few away from yours. I will suggest what I would try. Open your job settings file (press or print preferred to get all fonts) and then select the properties and the font tab. At your font to the always embed list and you will likely need to uncheck the subset box. Then save your job settings (give it a name that is meaningful to you, you can not use the settings file you started with as they are read only and I do not recommend changing that). Maybe that will do the job. Of course that is for the creation of the PDF, I forgot you were talking about a form. You might check the form field properties, but I suspect you have already tried that. Guess I don't play with forms enough. Others may be by to answer.
-
I recently received a PIXMA MG7520 for a gift. It works great with my lenovo laptop/tablet running on Windos 8.0. The one drawback to the HP all-in-one that it replaced is it does not have an ADF. That being said, there must be some way to scan multiple pages into one pdf file. I need help figuring thing out. Thanks in advance!
Solved!
Go to Solution.Hi mdtolbert54,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single PDF document. To do this, please follow these steps:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. Once all settings have been selected, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
7. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned items are saved in previously selected folder location specified in the SETTINGS... window.
If you find that you need advanced scanning options such as adjusting resolution, brightness, contrast, saturation, color balance, etc. in addition to the options selected above, please click on the SCANGEAR button on the IJ Scan Utility Main screen, then adjust the items as necessary.
Once the items above are set for document scanning, in the future, you will only need to launch the IJ Scan Utility, then press the DOCUMENT button to perform the scan (unless you want to make changes to the settings).
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
How to embed font into generated PDF?
Hi,
I have an issue with cyrillic fonts in PDF-file, generated from smartform using the following mechanism:
1. Run FM for smartform with ==> getotf = 'X'
2. Perform CONVERT_OTF retrieving result into a XSTRING.
3. Converting xstring content into a table using "cl_document_bcs=>xstring_to_solix).
4. Creating mail to an external internet user with attached pdf ==> using "cl_document_bcs=>create_document..."
Smartform contains cyrillic content, based on HELVCYR (Helvetica cyrillic) font. Application server is based on Windows.
Everything worked well (for months!) for allmost all of the clients of our customer. Of course, some of clients have different OS-es (such as Linux, Mac OS, etc.), and then the problem starts - they doens't view properly the cyrillic content. English content (even numbers, etc.) are properly displayed. We found what fonts are used in the PDF, but my questions are:
1. Is it possible to embed the font into generated PDF-content?
2. If no, is it possible to generate PDF-content non-selectable (i.e. in some image mode) ?
If yes, how to do this?
Or is there any other way to workarround this issue - to be able to display mail with attached PDF-content with cyrillic on different OS-es? It would be better if it is possible without calling external converter...
Any help would be highly appreciated.
Thanks in advance.
Regards,
Ivaylo MutafchievHello Ivaylo Mutafchiev,
There is no way we can control the fonts in the created PDF / while creating the PDF using the class cl_document_bcs in your PDF creation logic.
You can try some other approach of creating PDF from the Smartforms OTF stream data .
Try using the follosing FM for the PDF creation and sending email:
CONVERT_OTF_2_PDF
CONVERT_OTF_AND_MAIL
SO_OBJECT_SEND
CONVERT_OTF_AND_MAIL_NEW (Try this but this FM still uses the class that you are using currently. But give it a try and see the results)
Hope this answers your question.
Thanks,
Greetson -
HI,
I have a problem. I don´t know change a font in a PDF File.
I work with VB.Net.
I need replace a text that has a font by other font.
Could anyone help me?
I need to use the SDK examples in vb.net
Thanks.Hi,
Thanks for your help.
My problem is that I want to add multiple pdfs into one, and all individual pdfs have the same fonts but different subsets.
I want to embed full fonts and remove subsets to only refer to the embed fonts.
Regards,
Darío. -
How [Insert|Add] Image into Opening PDF file with Acrobat SDK.
Hi Guys,
I'm trying to insert|add image file into opening PDF file with specified location (X|Y) and scale (Width|Hight) but got many of troubles
If use third party like iTextSharp or something else thing become simple but i want to use Acrobat SDK to do this
Any suggestion or idea?
Any help appreciated.Thank for your interested.
I use VB.NET and Acrobat
Here is some my code:
Try
If File.Exists(T(0)) Then
Dim AcroAVDoc As AcroAVDoc = Ap.GetActiveDoc
Dim AcroPDDoc As AcroPDDoc = AcroAVDoc.GetPDDoc
Dim AcroPDPage As Acrobat.AcroPDPage = AcroPDDoc.AcquirePage(Integer.Parse(T(3)))
Dim data() As String = T(1).Split("^")
Dim imgX = data(0)
Dim imgY = data(1)
Dim imgWidth = data(3)
Dim imgHight = data(4)
'TODO: insert into opening PDF file
Return 1
End If
Catch ex As Exception
End Try
I don not know what to do next to insert an image (JPEG, PNG, ..) into PDF file.
Can you show me or suggest some solution, idea?
Thank in advance. -
I can't add chinese font into a pdf
I have scanned a book and OCR it into an PDF file. I want do some translation work that change the English to Chinese. I only use the Touchup tool, It's so hard to do, I have to right-click-properties-change the font to Simsun(It's the only Chinese font I can find in the font list), and when I type one word, the font set back to the original Arial, I can't do it in this way
Anyone have a good way to help me? I'll really appreciate your helpYou don't understand our thrust. PDF files are really not meant for
editing! Only the most minor of changes can be made and even if you can
change a single letter, you cannot expect the text on the page to follow
its previous course. It might, but all to often it will not. I have
seen changing one letter ruin several lines of text! It is always,
always, ALWAYS better to create the document anew rather than try any
serious editing. Even with minor editing it is better to recreate the
document if possible.
Mike -
Getting Canon 4770 to scan multipages into a PDF file while using the document feeder
Hi All
I'm new to this forum. So if I break any rules with my questions below, kindly forgive me.
But my questions are about my Canon MF4770 printer.
1. Why can't I used the document feeder to scan multiple pages into one PDF file?
2. Why do I have to constantly select the remote scanner option when the printer is connected to my computer?
Any help I can get will be very appreciated.
StarleneHi Starlene and welcome to the Canon forum,
The ability to scan multi-page documents can depend on your operating system and version, and if the scanning software being used supports the feature. However, the MF Toolbox application that accompanies your laser product offers this option when scanning via a USB connection to your computer.
For example, if you are using Windows, below are the steps that would be performed:
1. Place documents.
Note: Up to 35 documents can be loaded in the feeder. Be sure to fan the stack, place it face up, and align the document guides to the width of document.
2. Press [SCAN].
3. Press [^] or [v] to highlight <Remote Scanner>, and then press [OK].
The machine is now waiting to be scanned.
4. Double-click the [Canon MF Toolbox 4.9] icon on the desktop.
The MF Toolbox starts.
5. Click [PDF].
Select [PDF (Multiple Pages)] in [Save as Type].
7. Specify the required settings as needed and click [PDF Settings].
The [PDF Settings] dialog box appears.
8. Specify the required settings as needed and click [OK]:
[Create Searchable PDF] Converts the characters in the document to text data and makes the PDF document searchable with keywords.
[Text Language] Select the language of the text to be scanned. The characters may be recognized more accurately if you select [English] from the drop-down list and set [Image Quality] to [300 dpi] or higher in [Scanner Settings].
[PDF Compression] Select [High] for color images such as photos or illustrations to reduce file sizes.
9. Click [Start].
Note:
A folder with the scanning date will be created in the [MY PICTURES] folder in the [MY DOCUMENTS] folder, and your document will be saved in this folder. If there is no [MY PICTURES] folder, the folder with the scanning date will be created in the [MY DOCUMENTS] folder and your document saved in this folder.
For text documents or black-and-white documents, it is recommended you select either [BLACK and WHITE] or [GRAYSCALE] in [SCAN MODE].
If making a Multiple PDF with color documents ([IMAGE QUALITY] set to [300 dpi]), it is recommended that the PDF have fewer than 20 pages.
The MF toolbox can be loaded from your software CD or downloaded here from the "Drivers & Software" tab on the Canon USA website.
I can understand some confusion on having to select "Remote Scanner" when you have a direct computer connection to your product. The reason for this is that first, the "Remote Scanner" mode refers to seeing your computer as a stand alone, or remote, device; however, the "Computer" scanning mode option allows you to select which computer will be performing a scan when doing so over a network (Max: up to 10 computers).
Another reason for having to select the scan mode is that the selection is not programmed but selected based on the type of scan you will be performing at the time.
If this does not answer your questions or we can offer further assistance, please feel free to Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Maybe you are looking for
-
I am annoyed at how the Verizon site gets my hopes up
Ok so my wifes birthday is coming up in 2 weeks and I have heard her over and over how she wished she had a better phone and better camera. Now she has an old Iphone 4 and I have decided I would check and see if I could upgrade her phone. She is in c
-
Error : -2145124329 Installing Microsoft Azure Recovery Services Agent on SBS Standard 2011
When installing the Microsoft Azure Recovery Services Agent on Windows SBS 2011 Standard I receive error code - Error : -2145124329. When looking at the file OBManagedlog.LOGCurr.errlog located here: C:\Windows\Temp extract below it appears to be fai
-
Unable to view You tube videos due to version of Adobe flash player
I have installed teh latest Flash Player version from Adobe and also checked for the plugins which are installed. However when opeining You Tube for certain videos, I get a message " ADOBE flash player is required for playback. Get the latest Ado
-
Do I go with the MacBook pro or the MacBook air? I'm going into 8th grade and were required to have labtop. I Also edit videos for my YouTube chanel. Which should I get 13 inch model.
-
64 gb Ipad 2 now only has 13 gb available. Help Me.
I have a 64 gb ipad 2 on 5.0.1 firmware. When i plug it into itunes it only recognizes 13 gbs. My computer only recognizes 13gb. I restored it multipole times but still it only has that much space. I have no idea whats going on. Please help me before