Embedding more than one google map in a tabbed panel

Hi, I wonder if anyone knows if this is possible.  I am building google maps in  business catalyst and what I want to do is add multiple maps into my muse site.  For example, restaurants on one map, coffee shops on another, local produce on another.  Does anyone know if this is possible? Each time I try and enter the snippet of code I get to add to muse from business catalyst it is fine if I just enter on blank page, but when I try and enter the html in the tabbed panel it doesnt work.  Does anyone know of a solution ? I would really appreciate any feedback, Michele

Strange to be the first to reply to my own question but here goes, it may help someone with similar woes. I had been following the wiring colour code stringently. That being GREEN=FRONT, BLACK=REAR and ORANGE=SUBWOOF/CENTRE.
After clicking the Universal audio jack button on the realtek sound manager C.P and manually setting the blue port to be rear I took the Jack for my rear channels that had been in the BLACK port, and plugged it to the BLUE. I then tested all the speakers and "VOILA" every speaker channel works.
Im somewhere between NOOB and have to fix all my familys PC problems because they know even less than I do. Not sure what that makes me, a bit of a chancer probably, who gets lucky more than anything, anyway I can only guess that there is a problem with the onboard "BLACK" port. In saying that I have just came from a 2.1 setup for front and built in flat panel srs monitor speakers for rear, all this was setup as quadrophonic and as I recall the Black port worked fine whenever I used it as the rear channel. So anyway its working, Im not sweating too much about the whys and how comes. I am a little concerned about the 6700 reputation for a certain volume controller inner part burning out (TRANSISTOR)? I think is the culprit. Anyway I will deal with that if and when the time arises. Only 2 months left on my warranty and my speakers have been sat doing nothing for over 6 months maybe more so I should get some life out of them, fingers crossed.

Similar Messages

  • I want to view web sites in more than one open window instead of tabs. How do I change the settings to do that?

    I want to have more than one window open with firefox at the same time instead of having multiple web sites up using tabs. but every time I try to do this a tab opens instead. I am using windows 7.

    You can copy a bookmark from one folder and paste it in another folder to have a copy in more than one folder.

  • I have a new Palm Pre Plus - can I have more than one Google G-Mail Account on the phone?

    I have a general G-Mail account and it has started getting too busy with advertisements etc.  I'm thinking about changing to a different e-mail address but don't know what yet.
    I have an old Palm Centro I used to Synch with my laptop.  Now I need to do this with G-Mail.  So I created a unique g-mail account that would only contain my calendar and contact information - i called it "palm.last name" - made sense to me.
    When I try to add it to my Palm Pre Plus I am unable to sign in.  I'm wondering if you are limited to the number of Gmail e-mail accounts you can have on the phone.  If i can only have 1 then I don't want my e-mail to be "palm.last name" and give that out to people - that would not make sense to them. 
    I already have a Yahoo Account and I'm thinking about another Yahoo Account to keep some e-mails and instant messages separate from my personal Yahoo.  If I cannot add more than 1 account, this is going to be a problem.
    Thank you for any assistance you can provide.

    Hi, and welcome to the Palm Support Community.
    You should be able to add your second Gmail account without any problem...I have two Gmail accounts on my Pre and have no difficulties.
    When you say you are unable to "sign in", I assume you mean you are unable to sync the email and calendar on your new account?  Double-checking your user name and password are the only things that come to mind.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Syncing more than one Google Calendar with BB?

    Now that Google Sync for BB has been discontinued is there a way to sync my 'Other calendars' from Google Calendar to my BB 9900? It will only sync the main calendar (i.e. the one directly linked with my Gmail address).
    Q10 | Vodafone UK | London

    Do you mean a change to the mail box settings or a change to an e-mail? If the former, it won't change in Outlook if you change it on the iPhone. Whether a change to an e-mail (e.g. a deletion or a move to a folder) also changes in Outlook depends on whether you are using IMAP or POP to connect to your mailbox server. IMAP will keep the mailboxes synchronised all all times. POP will not. If you use POP for multiple mail clients (e.g. Outlook and your iPhone) make sure you choose to leave a copy of e-mails on the server or each message will only transfer to the first client to connect to your mail provider's server. IMAP is much better for the sort of set up you plan to have.

  • Can  you add more than one google calendar to ipad?

    Is it possible to add a second users google calendar to ipad and switch the default back and forth? I have set up a second google email address and can switch to which is the default but cant see how to do it with calendars? If not possible, then how can I remove/replace the default calendar set on it now?

    I wanted to create a sound effect of toy car hitting the wall. I just used the built in microphone and recorded my hand hitting the table. My hits were a bit out of sinc with the movie (the car hits the wall, backs up, then hits again and again. My slapping noises did not match up. I tried to go in and cut up the sounds so I could move them. This did not appear to be possible. I could "trim" it but not cut out individual sounds. Can this be done?
    Thanks

  • More than one summary column in cross tab reports

    Hi,
    I have a cross tab report.  The summary column is SUM. I want to add another summary column next to SUM which will be AVG(Average) column.
    Any ideas?
    Please see the attached image.
    Thanks,

    hi Anurag,
    my fault...i should have looked closer at your data.
    here's the easy way of showing two sets of summaries at the end of a crosstab, without having duplicate columns.
    1) copy your existing cross-tab and paste it to the right of your current cross-tab.
    2) now go to the cross-tab expert of the new cross-tab and remove the fields from the Column dialogue
    3) change the summary to an Average
    4) exit the cross-tab expert and go to the Section Expert for the section where both cross-tabs are...ensure that you check Relative Positions
    preview the report. now you'll have to move the 2nd cross-tab a bit so that it aligns properly with the first one.
    as a sample, see the attached report. extract the contents and change the .txt extension to .rpt.
    -jamie

  • Iweb'09 google map adding more than one address

    Is it possible to add more than one address to a single map. I am a gardener and wanted to show on one map where all my customers are.

    Wyodor wrote:
    Can you do it in Google Maps?
    Have you read the Google Maps Help?
    Go where the knowledge is.
    http://maps.google.com/support/
    http://maps.google.com/support/bin/topic.py?topic=23520
    [Add content to maps|http://maps.google.com/support/bin/answer.py?hl=en&answer=67842]
    After my less-than-satisfying experience with you in a thread I have noticed that you seem to make post after post with little putdowns of the users you are responding to. Would it be possible adjust your manner? It is especially annoying since your answers are not consistently correct or helpful.

  • Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?

    Form that is a map of Ohio. I created layers for each county so I can click and it highlights, but I need to be able to click more than one. How do I do that?

    Looks nice!
    I understand what you've done now. You used the "Set Layer Visibility" command which sets the on/off state of all the layers at once. What you need is a more subtle approach, one that will only change the state of the specific layer associated with the button, not the rest of them (so that you could have multiple layers enabled at the same time). The way to do that is by using a script.
    I wrote the script for you and applied it to the top-left counties (WILLIAMS and FULTON), in the attached file. You can now copy the actions I associated with those buttons to the rest of them, and it should work as you want it to.
    The file: MAP-HHA-Geographic(3)_edited.pdf - Google Drive

  • My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8.

    My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.

    2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
    I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that.

  • INDESIGN GLITCH: Creating an XML file from Indesign Layout - Issue "Using more than one line of GREP" & "Map Styles to Tags"

    I currently create XML from InDesign CC by Mapping Style to Tags.
    - The Paragraph Styles are manually apply to text. These styles include multiple lines of GREP to automatically apply character styles.
    - I map some of the paragraph and character styles to prebuilt tags that have the same name "Map Styles to Tags".
    I have found through trouble-shooting that InDesign is unable to "Map Styles to Tags" for more than one line of GREP. I therefore have to chose which line of GREP to automatically tag and which lines to manually tag.
    Please can anyone help, I need to automatically map tags to at least two character styles in one paragraph via GREP.
    Thanks,

    OK. The best I can suggest is running a Find/Change like this:
    Which will actually apply the character style to the italics (and I would do the bold as well just to make certain). Then run the Map Styles to Tags again, using the Apply by Name. Which will tag the italics.
    I don't know why ID can map to the bold and not the italic character style. It either should do them both (as in this instance) or none at all as the character styles are not actually applied by the grep, just the styling from the character styles.
    Mike

  • Maps - how to set up more than one destination

    In Mavericks 10.9.4, how do I use the system Maps application to set up more than one destination?  I saw no way to add a 2nd destination to my route.  I know I could set up several one-destination trips but that seems silly.

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • HT4968 Can I add subscriptions to more than one calendar?  I would like my google cal to be added to my main ical cal.      be to more than one calendar

    CAn I add more than one subscription to my main calendar in ical?  I have a google cal I use for work, plus a another schedule i subscribe to.  I would like both of those to fill my main ical cal.

    I'm not sure how you would merge them without dragging and dropping the events from your separate calendars into the one you want to hold the merged events.
    iCloud won't sync calendars from external account such as Google.  The easiest thing to do would be to add them to your iOS devices as explained here: https://support.google.com/calendar/answer/151674?hl=en&rd=1.  They will then appear alongside your iCloud calendar on your iOS devices just as they do on your Mac.

  • Mapping a CMP bean to more than one table

    Hello,
    I like to map a CMP bean to more than one table. I am using wlserver7.0 SP2. I
    have a VendorBean with a CMP field "comments" mapped to VENDOR_COMMENTS table.
    All other CMP fields in VendorBean are mapped to VENDOR table. Below is the snippet
    of weblogic-cmp-rdbms-jar.xml:
    <weblogic-rdbms-bean>
    <ejb-name>VendorBean</ejb-name>
    <data-source-name>sweepDataSource</data-source-name>
    <table-map>
    <table-name>VENDOR</table-name>
    <field-map>
    <cmp-field>expIndicator</cmp-field>
    <dbms-column>VENDOR_EXP_IND</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>vendorId</cmp-field>
    <dbms-column>VENDOR_SEQ_KEY</dbms-column>
    </field-map>
    </table-map>
    <table-map>
         <table-name>VENDOR_COMMENTS</table-name>
         <field-map>
    <cmp-field>vendorId</cmp-field>
    <dbms-column>VENDOR_SEQ_KEY</dbms-column>
    </field-map>
         <field-map>
    <cmp-field>comments</cmp-field>
    <dbms-column>VENDOR_COMMENT</dbms-column>
    </field-map>
    </table-map>
    As you can see, "vendorId" is the primary key cmp field mapped to VENDOR_SEQ_KEY
    column in both tables. The relationship between the table rows are 1 to 1. When
    I run ejbc, I get the exception below:
    [ejbc] weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Asserti
    on violated ]
    [ejbc] at weblogic.utils.Debug.assertion(Debug.java:74)
    [ejbc] at weblogic.ejb20.cmp.rdbms.RDBMSBean.processRole(RDBMSBean.java
    :1389)
    [ejbc] at weblogic.ejb20.cmp.rdbms.RDBMSBean.processDescriptors(RDBMSBe
    an.java:1105)
    [ejbc] at weblogic.ejb20.cmp.rdbms.Deployer.readTypeSpecificData(Deploy
    er.java:299)
    [ejbc] at weblogic.ejb20.persistence.PersistenceType.setTypeSpecificFil
    e(PersistenceType.java:490)
    [ejbc] at weblogic.ejb20.persistence.PersistenceType.setupDeployer(Pers
    istenceType.java:407)
    [ejbc] at weblogic.ejb20.deployer.CMPInfoImpl.setup(CMPInfoImpl.java:11
    4)
    [ejbc] at weblogic.ejb20.ejbc.EJB20CMPCompiler.generatePersistenceSourc
    es(EJB20CMPCompiler.java:64)
    [ejbc] at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:22
    3)
    [ejbc] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:3
    44)
    [ejbc] at weblogic.ejbc20.runBody(ejbc20.java:470)
    [ejbc] at weblogic.utils.compiler.Tool.run(Tool.java:126)
    [ejbc] at weblogic.ejbc20.main(ejbc20.java:711)
    But if I put the "comments" <field-map> inside the VENDOR <table-map> and get
    rid off the <table-map> for VENDOR_COMMENTS, I was able to run ejbc. Of course,
    I get the run time exception during deployment because, there is no column called
    "VENDOR_COMMENT" in VENDOR table. Please help me. Thanks a million.

    Wrong newsgroup, needs to go to one of the ejb newsgroups.
    mbg
    "Sai S Prasad" <[email protected]> wrote in message
    news:[email protected]...
    >
    Hello,
    I like to map a CMP bean to more than one table. I am using wlserver7.0SP2. I
    have a VendorBean with a CMP field "comments" mapped to VENDOR_COMMENTStable.
    All other CMP fields in VendorBean are mapped to VENDOR table. Below isthe snippet
    of weblogic-cmp-rdbms-jar.xml:
    <weblogic-rdbms-bean>
    <ejb-name>VendorBean</ejb-name>
    <data-source-name>sweepDataSource</data-source-name>
    <table-map>
    <table-name>VENDOR</table-name>
    <field-map>
    <cmp-field>expIndicator</cmp-field>
    <dbms-column>VENDOR_EXP_IND</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>vendorId</cmp-field>
    <dbms-column>VENDOR_SEQ_KEY</dbms-column>
    </field-map>
    </table-map>
    <table-map>
    <table-name>VENDOR_COMMENTS</table-name>
    <field-map>
    <cmp-field>vendorId</cmp-field>
    <dbms-column>VENDOR_SEQ_KEY</dbms-column>
    </field-map>
    <field-map>
    <cmp-field>comments</cmp-field>
    <dbms-column>VENDOR_COMMENT</dbms-column>
    </field-map>
    </table-map>
    As you can see, "vendorId" is the primary key cmp field mapped toVENDOR_SEQ_KEY
    column in both tables. The relationship between the table rows are 1 to 1.When
    I run ejbc, I get the exception below:
    [ejbc] weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[Asserti
    on violated ]
    [ejbc] at weblogic.utils.Debug.assertion(Debug.java:74)
    [ejbc] atweblogic.ejb20.cmp.rdbms.RDBMSBean.processRole(RDBMSBean.java
    :1389)
    [ejbc] atweblogic.ejb20.cmp.rdbms.RDBMSBean.processDescriptors(RDBMSBe
    an.java:1105)
    [ejbc] atweblogic.ejb20.cmp.rdbms.Deployer.readTypeSpecificData(Deploy
    er.java:299)
    [ejbc] atweblogic.ejb20.persistence.PersistenceType.setTypeSpecificFil
    e(PersistenceType.java:490)
    [ejbc] atweblogic.ejb20.persistence.PersistenceType.setupDeployer(Pers
    istenceType.java:407)
    [ejbc] atweblogic.ejb20.deployer.CMPInfoImpl.setup(CMPInfoImpl.java:11
    4)
    [ejbc] atweblogic.ejb20.ejbc.EJB20CMPCompiler.generatePersistenceSourc
    es(EJB20CMPCompiler.java:64)
    [ejbc] atweblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:22
    3)
    [ejbc] atweblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:3
    44)
    [ejbc] at weblogic.ejbc20.runBody(ejbc20.java:470)
    [ejbc] at weblogic.utils.compiler.Tool.run(Tool.java:126)
    [ejbc] at weblogic.ejbc20.main(ejbc20.java:711)
    But if I put the "comments" <field-map> inside the VENDOR <table-map> andget
    rid off the <table-map> for VENDOR_COMMENTS, I was able to run ejbc. Ofcourse,
    I get the run time exception during deployment because, there is no columncalled
    "VENDOR_COMMENT" in VENDOR table. Please help me. Thanks a million.

  • How to map more than one xml element with some Paragraph in a Text Frame

    Hi friends,
    I am new in InDesign Java Scripting and I have to place or map, more than one xml elements of different parents, into one textbox. Is it possible through JavaScript? Can anyone help me in this because I have no idea how it should work and it urgently required.
    Thanks in Advance

    I had answered to you already in your first post: the short answer is that it's not possible on the same text box unless you assign a common ancestor of these two "parents" item. That's not a question of scripting, it's the way Indesign handle the XML with the layout. Import a xml in Indesign and drop tags to page item. What you can do manually is quite representative of what can be done through scripting.
    If you assign this anscestor to the text frame, you have to expect that all text child items will be displayed in the text frame (including the text of all the child of the two "parents" and all the other parents/childs that could be under the common ancestor). Having a XML that is designed for Indesign usage is pretty much inevitable if you are doing anything "serious".

  • Cisco ACE loadbalancing matching more than one header in L7 class map

    Dear All,
    This is regarding Cisco ACE loadbalancing matching more than one header in L7 class map. I have a small setup with ACE 30 module in Cisco6500. I have got three webservers. Presently I have following configuration where I am mathing one url header.
    class-map type http loadbalance match-all L7_WEB_HEADER_MATCH
    description MATCH THE HOST HEADER OF HTTP REQUEST
    2 match http header Host header-value ".*abhisar.com*"
    So for above configuration, when traffic is coming for abhisar.com, it is working fine.
    Now, I have following headers and DNS entry is pointing to same virtual IP for all http url header same as abhisar.com
    abhisarindia.com
    indiaabhi.com
    So new configuration will be
    class-map type http loadbalance match-any L7_WEB_HEADER_MATCH
    description MATCH THE HOST HEADER OF HTTP REQUEST
    2 match http header Host header-value ".*abhisar.com*"
    4 match http header Host header-value ".*abhisarindia.com*"
    6 match http header Host header-value ".*indiaabhi.com*"
    So just want to confirm if this is fine.
    Thank You,
    Abhisar.

    Dear Rajesh,
    Thank you for reply. I will let you know once I carry out this activity.
    Thank You,
    Abhisar.

Maybe you are looking for