Embedding remote swf not working

I am using Acrobat X Pro.I am Unable to embed https swf in pdf by specifying the url in the f;ash tool.If I use http url it works.
The Pdf is blank

First things first, to eliminate the silly stuff, you have a typo in the code you have there which would break things - addChild(_Splash1); should be addChild(_splash1); (capital S). Is this a copy error or is it in your actual code?
G

Similar Messages

My Apple TV remote is not working.

My Apple TV remote is not working. It was fine this morning, but now ATV is not responding to it. It still access iTunes on my Mac so I don't think it's a battery issue. The white light flashes on ATV, but nothing happens. I have restarted ATV several times from the mains, but no change. Please help!

Hey Punkmonk1,
Thanks for the question. I understand that you are experiencing issues with your Apple TV remote. The following resource may provide a solution:
Apple TV (2nd and 3rd generation): Resolve issues with Apple Remote
http://support.apple.com/kb/TS5157
Thanks,
Matt M.

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

HT1619 my remote is not working with the new imac 27" :(

my remote is not working with the new imac 27" i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

<http://store.apple.com/us/product/MC377LL/A/apple-remote>
"Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
<http://www.iospirit.com/products/remotebuddy/>

Embedded Youtube videos not working on Chrome 23 / Flash player 11.5.31.2

For the past couple of weeks, I've not been able to play any Youtube videos that appear as embedded videos on other websites. The small player appears with the still frame from the video and all the controls, but on pressing play, the video goes blank and won't play (the slider stays stuck at 0:00). Nor does the full screen button work - the player just stays where it is within the third party website. This problem has occurred across more than one website, but all sites still work in Internet Explorer.
The main Youtube site is still working.
I have tried all relevant steps here, to no avail (except increasing memory for a particular website, since not just one website is affected):
http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html
Details:
Windows 7 Home Premium 32-bit
Google Chrome 23.0.1271.64 m
Flash Player 11,5,31,2
Any suggestions please?
John

Thank your for your reply, Chris.
I installed the newest version of Chrome, and the videos I have
embedded on my blog are now working.
Regards,
Frank
2012/11/30, Chris Campbell <[email protected]>:
Chris Campbell http://forums.adobe.com/people/chris.campbell created the
discussion
"Re: Embedded Youtube videos not working on Chrome 23 / Flash player
11.5.31.2"
To view the discussion, visit:
http://forums.adobe.com/message/4885375#4885375

I bought a EarPods October last year in USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can lisence music but can not adjust the volume and answer the phone, can I get a new one or what can I get?

I bought a EarPods October last year in the USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can listen music but can not adjust the volume and answer the phone, can I get a new one or what can I get based on the one year product warrant?

Now I am live in Baoding city, China, what I can do, it seems there is no apple store in my city??

SWF Not Working...Help Please :(

Hi all,
So I've been having an issue with a SWF not work on a page and this is what I can seem to come up with after hours of messing with Dreamweaver and Flash trying to understand why it won't work. When i test the movie from the working Flash file, it works no problem. Something is going wrong when I export or publish the movie and it no longer works. Is this something that happens?
Your help is much appreciated...this site needs to go up in the next day or so and the SWF was working and then stopped working and I'm honestly not a Flash gal so I really have no business messing with it, but it was a specific request. Thanks!

One thing that might be an issue as far as the web page goes it that the html specifies a file named carousel2.swf which does not appear to exist on the server and is not the same name as the file you are calling the swf in your swf link (*carousel3.swf).
Without knowing what goes on inside carousel3, or carousel 2 for that matter, it's hard to say if it is missing the xml file that it might need. But for either case, are you certain that you have uploaded the xml file that is needed?

Apple remote contra not working with Lion

I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
Is there any solution for that?
Thanks

It's not working for me either.
I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
Please somebody help us!

Embedded SWFs not working with Flash 9

Hello,
I am also plagued with the Flash Player 9 issue. None of my
embedded SWF files work if I publish with this version of the
player installed. I ran the uninstaller and I'm now using version
8. However, each time I open a PPT file I get an error saying "some
controls on this presentation can't be activated. they might not be
registered on this computer". This is very irritating. So, my SWFs
still don't work. I found that if I register the v9 ocx and
re-insert the SWFs, they will publish properly (while the Player 8
is installed). However, I have about 50 existing PPTs with anywhere
from 10-30 SWFs per presentation. I'd like to avoid this method if
possible. Does anyone know of an easier solution? Thank you.

good morning DocDVM and Supermercado Gato,
I have the same issue with embedding SWF files into Breeze. I
have been doing some searching the last two weeks and i found an
tech note that you might want to read. It seems that Breeze is not
really set up for Flash player 9 so Adobe came up with a work
around. Read the technote.
http://www.adobe.com/go/f9204eb8
I am having my IT Department update Breeze for me so i will
let you know if it works or if you update your Breeze let me know
if this fixes the issue.

Preloader in external swf not working

I have several external SWFs that are loaded into my site and
each one has a preloader. When I run them by themselves the
preloader works fine, but when it is embeded into the main SWF the
preloaders do not work. Any ideas?
here is my actionscript -
lBytes = _root.getBytesLoaded();
tBytes = _root.getBytesTotal();
percentLoaded = Math.floor((lBytes/tBytes)*100);
loader.bar._xscale = percentLoaded;
loader.percent.text = percentLoaded + "% of " +
Math.floor(tBytes/1024) + "K loaded.";
if (lBytes>=tBytes && tBytes>0) {
if (count>=12) {
gotoAndPlay("enter");
} else {
count++;
gotoAndPlay("preload");
} else {
gotoAndPlay("preload");
}

I am experiencing the exact same problem on my site -
www.expansiondesign.com
It works in flash player but not when live (tested safari and
firefox)
I don't know if you are using the same script as I am paul.
I execute the following when each image button is pressed:
button1.onRelease = function () {
startLoading("image1.jpg");
which runs this:
function startLoading(whichImage) {
loadMovie(whichImage, "_root.image_holder");
_root.onEnterFrame = function() {
infoLoaded = _root.image_holder.getBytesLoaded();
infoTotal = _root.image_holder.getBytesTotal();
percentage = (infoLoaded/infoTotal*100);
_root.loader._yscale = percentage;
_root.loader._visible = true;
if (percentage>=100) {
delete this.onEnterFrame;
_root.loader._visible = false;
Thanks,
Barton

Swf not working when moved to other folder....

Hi all...
i have created a simple flex project that does not use any server technology... i have then used acitonscript to dynamically set up my end points and channels for a simple remote object which calls a java class on a tomcat local server.
all works as it should.
the folder that contains my swf in on my desktop. If i was to copy the folder and move it to another location... the program does not work.?
I want to able to create a swf that can work anywhere on the local machine.
and to be extra awkward... i dont want to use air
any ideas?

Hi greg..
thanks for your help...
ive tried it with -use-network=true. but i am not having any luck.
when i tried -use-network=false i get an error :
SecurityError: Error #2010: Local-with-filesystem SWF files are not permitted to use sockets.
at flash.net::Socket/internalConnect()
at flash.net::Socket/connect()
at mx.netmon::NetworkMonitorImpl()[/ndepot/ide_builder/ActionscriptProjects/src/mx/netmon/Ne tworkMonitorImpl.as:79]
at mx.netmon::NetworkMonitorImpl$/init()[/ndepot/ide_builder/ActionscriptProjects/src/mx/net mon/NetworkMonitorImpl.as:30]
at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::docFrameHandler()[E:\dev\beta1\frameworks\proj ects\framework\src\mx\managers\SystemManager.as:3394]
at mx.managers::SystemManager/docFrameListener()[E:\dev\beta1\frameworks\projects\framework\ src\mx\managers\SystemManager.as:3258]

Embeded Flash component not working

I have createdf a Flash movie using the Drag & Drop
Learning Interactions Component using Flash MX 2004. The
interaction works fine as standalone Flash movie but when embedded
in an Adobe Presenter presentation, the drag works ok but it will
not drop the object. I have had the Breeze control the Flash movie
and also Breeze not control the movie.
Any ideas?

Hi Conrad!
As you have no doubt already realized, using the Learning
Interaction templates that are available in Flash MX / MX2004 and 8
will not work at all in Presenter content.
The coding methods conflict while playing back within the
Breeze environment and I
think it has to do with the _dropTarget property as part of
the interaction's codebase. The _dropTarget method is NOT supported
in Breeze, but the hitTest() method IS!
I have written a few drag and drop exercises that do work
within Breeze content, and you have to use the hitTest() method to
accomplish it.
As you already have discovered, the bottom line is that the
learning components were intended to be "stand alone" objects that
could be incorporated into a web page (or even a CD as these
objects are nothing more than swf files). Aside from the fact that
the prebuilt/preconfigured learning objects in flash don't always
work in Breeze, in my mind, the bigger question here is the ability
(or more accurately) the inability to connect these SCO's to an LMS
for tracking. As stand alone objects, they're actually pretty
handy...but not in Breeze.
I realize this doesn't help much with what you're trying to
do, but from my perspective, you're better off creating your own
drag n' drops.
I've got a bunch of examples to share if you'd like to take a
look...just send me a PM or email if you're interested.
Rob
[email protected]

IPhone 4 Remote App Not working

Hello,
Sorry for posting another 'not working' thread, but having searched the forum I cannot find my answer.
I am not very technical, but I have iTunes and an iPhone 4.
I have the remote app and the app has worked perfectly up until recently.
I have upgraded iTunes to 10 and also my antivirus.
Now I know alot of these things could be caused by the firewall, but I have allowed iTunes to be let through the firewall and I have switched off the firewall in the past to ensure it was not this.
When I switch on the computer and open iTunes then go to the remote app it works. It is when the iPhone 'sleeps' that the library wont re connect, OR if i have been using iTunes and then try and start the remote that it will not work.
Any ideas at all as it is so frustrating. I am not technically minded, so switching router channels etc and proxy settings/DHCP etc dont really make sense to me.
I have tried rebooting everything including the router, but believe it is something simple as it was working prior to iTunes 10.
I am running a PC on Vista
Thanks
Steve

no I use both ipad2 iphone4 with remote app and have no issues with ios
try removing the setup and start over

LaserJet Pro MFP M125nw - Scan to app All-in-One Remote does not work

Hi gurus,
Basically I have pruchased that super-printer and I am now trying to achieve scan to my mobile devices.
I have one iPad 2 on iOS 7, on 2 Android devices (smaller tablet and phone) both running Kitkat 4.4.2
I am trying to submit a scan from all these devices and retrieve the output within my mobile devices, actually this is fairly described here and concerns accurately my printer model : http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02486319&tmp_task=useCategory&cc=us&destPage=pr...
Unfortunately, What happens :
- From my iPad, the AiO app states that my printer is not compatible with the application !!
- From my 2 Android devices, the All-in-One Remote app will work fine, except the scan feature as nothing happens (well, when tapping either 'Preview' or 'Scan' button in the Scan section, I see a 'Cancel' button during 0,1 second and I am back to that scan section)
Any one could help please ???
This question was solved.
View Solution.

Hello,
Can no one help ?
Is the product description misleading ? Is the AiO app not really reasy to support this printer ?

Remote control not working on Touchsmart 610-1030uk

Had been working fine for long time. Now out of warranty. Battery fine. Indicator on remote and on PC (white LED on front panel) both show IR is working. Mouse and keyboard still work fine. I have tried uninstalling and reinstalling drivers for Microsoft eHome infrared transceiver but still can't get the machine to respond to remote control.
Any thoughts?
This question was solved.
View Solution.

Hello frrw. Sorry to waste your time. I changed the batteries and it works fine. It seems the red LED on the remote and the white LED on the PC that flashes when I press a button on the remote do not mean that the batteries are strong enough.
Meanwhile I have that recurring problem with blu-ray players. I will post a new question and maybe you can help.
Many thanks.

Embedding remote swf not working

Similar Messages

Maybe you are looking for