Embedding SWF into Powerpoint 2007....

I use this method to place a SWF in Powerpoint 2007. (see below).
My question is... how do I make the path relative and not absolute? So whatever path/destination I put in the "Movie" property is absolute and if and when I sent this PPTX file to someone (like in a folder) the SWF no longer plays. I wanted to make a path that is relative... so instead of putting "C:\Use\Profile\Desktop\Flash.swf" I wanted to know if I could do something like "Flash.swf" and then it'll play the SWF since it'd be in the root (or maybe a subfolder).
Place SWF in Powerpoint 2007:
1. Click Office Button.
2. Click “Powerpoint Options”
3. Under the “Popluar” tab check “Show Developer tab in the Ribbon”. Click OK
4. Click the “Developer” tab.
5. Click the “More Controls” button (wrench/hammer icon)
6. Choose “Shockwave Flash Object”. Click OK.
7. Cursor turns to crosshairs. Drag box to house the object.
8. In the “Properties” pop-up, find “Movie”.
9. Under “Movie”. Paste in the path of the file. (i.e. C:\Users\Profile\Desktop\flashAnimation.swf
a. Try to put the SWF in the same root location as the PPTX.

You can insert a .swf file into PowerPoint using the method you described with both an absolute and a relative path. But that will just insert it and play it as a linked file.
What you seem to want to do is to embed the file. That's tricker. The .pptx file extension apparently has a known and unfixed bug that won't let you embed a .swf. There's nothing out there, that I could find that may be of help. But you could try these two steps:
In the properties panel for the insered swf, find the EmbedMovie property and set it to "True".
Then Save As... your Presentation to the older file format (.ppt not .pptx). This may show up in the Save menu as "PowerPoint 97-2003 Presentation".
This may work, you should take note that the file size should increase significantly. If the Presentation's file size doesn't increase, then you know it hasn't been embedded and the animation will not play if you email the file (because it's not included).

Similar Messages

Cannot embed 3D PDF into powerpoint 2007

Hello:
I can't embed 3D model from .pdf file into powerpoint 2007.
Followed all instructions, the 3D model is captured from VMD program using acrobat 3d 8.0,
it is saved automatically as .pdf file,
it is able to open and rotate in the acrobat reader,
then in powerpoint 2007, when i want to embed it,
i click the embed 3D button, the add 3d data window appear,
but in the file selection, the .pdf file is not supported.
only those .u3d, .cad, ... are supported, and i tried these, they can be embeded.
but i am confused, how can i really embed the .pdf file to powerpoint?
Any help is appreciated. Thanks a lot.

Thanks for both of your help.
I am still not quite understand how the OCX means.
Does it mean the "embed 3D" button appeared in powerpoint or some other kind of software?
Currently what I did is export the 3d model in the .pdf to a .u3d file.
then I can choose the .u3d file and embed it since this format is supported. And I can rotate it in powerpoint. But the only problem is it's now in perspective view and I cannot change it to orthographic view inside the powerpoint.
Even in the .pdf I set the default view to orthographic, the exported and embeded is still perspective.
So is there any way to export it as orthographic model?

Insert SWF into PowerPoint 2010?

When I wanted to insert a SWF into a PowerPoint 2007 presentation, I would use the More Controls dialog in PowerPoint's Developer tab to insert a Shockwave/Flash object. But in PowerPoint 2010, that control is missing from the dialog. Where did it go? When I click the Register Custom DLL, there's no obvious file to choose, either.
Has anyone else run into this? I'm not looking for a way to convert a SWF into a video that can be embedded or using a 3rd-party plug-in or anything like that. I know how to do those things. I'm specifically looking to insert a SWF using only what's built into PowerPoint and Flash, so if anyone has info on it, please let me know!

I have installed PowerPoint 2010 beta release on my machine. I was able to attach a SWF file to the presentation successfully. All options to insert a video are located on the Insert tab, in the Media group. Please refer to the link below on how to insert a flash movie to the presentation.
http://office.microsoft.com/en-us/powerpoint-help/embed-a-video-in-your-presentation-HA010 374729.aspx?CTT=5&origin=HA010338310
Also Microsoft have provided support for Flash in PowerPoint 2010. To find the list of supported formats please visit the following link:
http://office.microsoft.com/en-us/powerpoint-help/compatible-audio-and-video-file-formats- in-powerpoint-2010-HA010336709.aspx?CTT=1

Embedding Swf into to forum signature

Hi, i have been trying to find this everywhere but no good.
How can i embed swf into forum Posts and signatures ? Its my site s
o i change settings etc.....is there some mod that should be
installed on the forum ? Any help at all would be really
appreciated =)
J

No. I mean that the Flex framework makes certain assumptions about the environment it is running in -- like having a stage to work with. The Alert function, for example, works by creating a sprite and adding it to the Flash display list. Since your embedded SWF is not on a stage, there's no way for it to work.
You can can possibly use certain non-visual parts of the framework, such as the rpc package, but I can't guarantee it.

Embedding swf into HTML+JS AIR app

Hi
I'm trying to embed swf into HTML+JS AIR app with no luck.
First, I created flash library with this class in default package.
package
     import mx.controls.Alert;
     public class Utilities
          public function Utilities()
                         //asdfasdf
               Alert.show("asdasd","");
Then I compiled the project with Flash Builder and got library.swc as result. Then I extracted swf file.
After this is added required code into my html:
<html>
<head>
    <script type="text/javascript" src="AIRAliases.js"></script>
    <script type="text/javascript" src="AIRIntrospector.js"></script>
    <script type="text/javascript" src="jquery-1.6.2.js"></script>
    <script src="library.swf" type="application/x-shockwave-flash"></script>
    <script type="text/javascript">
        $(document).ready(function () {
            alert('loaded');
            air.Introspector.logError("aaa");
            var v = new runtime.Utilities();
    </script>
</head>
<body>
</body>
</html>
Then after I run application, I get error that result of expression is not constructor, function etc.
Could you help me please? Thanks in advance.
Here is sample code:
http://depositfiles.com/files/jztpnlb3a

No. I mean that the Flex framework makes certain assumptions about the environment it is running in -- like having a stage to work with. The Alert function, for example, works by creating a sprite and adding it to the Flash display list. Since your embedded SWF is not on a stage, there's no way for it to work.
You can can possibly use certain non-visual parts of the framework, such as the rpc package, but I can't guarantee it.

White box of death! Trouble embedding swf into Dreamweaver!

So close to being finished! I notice this question on alot of other forums but its never resolved!
here is the site now:
http://http://www.andrewweeksphotogr...m/index_8.html
you will notice a slight flash of a white box before the preloader starts, i'm trying everything to make it go away! this box seems to be the same size as my embedded swf. the site and preloader are all in one swf. all i need to do is make that white box the same color as the background so it is unnoticeable.
here is the code from dreamweaver (you'll notice im sticking in color values wherever i can!)
help a gal out! many thanks!
-nicole

oops! code / site link here!
http://www.andrewweeksphotography.com/index_8.html
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<style type="text/css">

</style>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
</head>
<body>
<table width="1150" border="0" align="center" cellpadding="10" cellspacing="0" bordercolor="#FBFCEB" bgcolor="#FBFCEB">
<tr>
    <td bordercolor="#FBFCEB" bgcolor="#FBFCEB"><script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','width','1150','height','768','src','Andrew Weeks Photography','quality','high','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','Andrew Weeks Photography' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="1150" height="768">
      <param name="movie" value="Andrew Weeks Photography.swf" />
      <param name="quality" value="high" />
      <param name="bgcolor" value="#FBFCEB" />
      <embed src="Andrew Weeks Photography.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="1150" height="768" bgcolor="#FBFCEB"></embed>
    </object></noscript></td>
</tr>
</table>
</body>
</html>

Re: embedding SWF into HTML

I don't seem to be able to add to the discussion! Hans wanted the url of the file that works: http://claudinegrandjean.com/Me.- html this is the one that doesn't please forget the placement of the SWF I could fix it if it worked; Cheers, Claudine

No. I mean that the Flex framework makes certain assumptions about the environment it is running in -- like having a stage to work with. The Alert function, for example, works by creating a sprite and adding it to the Flash display list. Since your embedded SWF is not on a stage, there's no way for it to work.
You can can possibly use certain non-visual parts of the framework, such as the rpc package, but I can't guarantee it.

Embedding swf into Flex Desktop Application size/scale problem.

Hello,
I am embedding an swf animation into my desktop Flex desktop application. I am using SDK 4.6.0. I use the SWFLoader to embed the animation:
<s:SWFLoader source="img/mch_anim_1.swf"/>
When I run the application, the animation is loaded and is working, but when I try to maximize the window there is a size/scale bug that happens. The screen stays half-side maximized (maximized to the top, bottom and stays until the middle of the screen by side).
I've published the SWF for Flash Player 8 and Actionscript 2 just to test and there was no problem with the size/scale, but I need to use Actionscript 3.
Any suggestions?
Thanks in advance,
Stefan

I found the problem!
There was a line of code that was auto-generated from using a template out of Flash CS6. The line of code that caused it is:
stage.scaleMode = StageScaleMode.SHOW_ALL;
After deleting it, everything is now working properly.
Greetings!

Problems with embedding swfs into Director 11.5

Hello everyone,
I am hoping someone can help me and please bear with me - I don't know a lot about director - I can do some Lingo and get around in the program to make things work.
Right now I am working on an interactive presentation where the user can click a button to view an animation. I am using Director 11.5 for my presentation and have made my animations in After Effects CS3 -- from there I converted my .mov files to .flv files using the Adobe Media Encoder CS4... then I took my .flv file into Flash and published it as a swf file.
The problem that I am having is that when I play the presentation (within Director and after publishing the .app/projector file) the swf files are playing - but there is all this glitchy-artifact stuff all over them. Does anyone know why this would be happening? When I play the swf files in the flash player they look great. Before, when I was using Flash MX and Director MX, I never had any problems with embedding my swf animation files - and they played great - without any artifact. Any and all help would be much appreciated as this project is due in the next few days and I would prefer to figure out a solution rather than uninstalling Flash CS4 and Director 11.5 - and going back to MX.
I toyed with the thought that my video card isn't good enough but I tested the .app file on another machine and the glitchy-artifacts were still there. I have attached a jpg showing the artifact that appears.
I am running Mac OS X 10.5.7
Dual 2 GHz G5 PowerPC
ATI Radeon X800 XT
Thank you!

Sorry... here is the image again and I think the problem might be my machine -- it is very old (~4+ years) and when I tested my .app on a newer intel mac here it worked fine... but maybe I am missing something -- it seems odd that I can see the swf fine in flash player but it is glitchy when played through director or the .app projector file

Embedding SWF into HTML

Hi. I am trying to make a SWF open a new browser window when
it is clicked, acting as a Splash page that opens the main page. I
want the main page to open in a new window 800 x 600 with none of
the address bar, toolbars etc. I've managed this but there are
three problems:
1. The little grey strip at the bottom that says "Done",
"Internet" etc, I think its called 'Status' still appears even
though I've set status to no.
2. The code I've used in flash to spawn the new browser
window works with Firefox but not with Internet Explorer.
3. The SWF's play slower in a browser.
I have included the code I've used below. Can anybody help?

Hello Claudine,
to .ste (I tried to translate from my German library): The file extension ".ste" characterizes the site definition files of DW. A ste file is an XML-based text file which contains information about a DW made site. These include the site name, the site address and the server model.
ste files can be imported and exported by using (translated from my German DW: 'Site -> Sites verwalten' ) 'Site > Manage Sites'. Please note it's a settings file and not a backup.
What concerns the embedding problem: Please send a link to your website in question, no matter how it looks like , so we can better analyze.
Hans-Günter

Help for PowerPoint 2007 crash when running embedded SWF file with latest Flash Player?

I have developed in Xcelsius 2008 SP4 a dashboard with only Excel as the source. I output to PowerPoint and then save it as a PowerPoint 2003 PPS file. On more than a few machines that have PowerPoint 2007, PowerPoint crashes when I attempt to run the presentation. This happens only with later versions of Flash Player. I have tried uninstalling/reinstalling the latest Flash Player but it still crashes. However, when I revert back to Flash Player 10.1.159..., in PP 2007 the presentation runs perfectly.
With regard to the error I receive in PowerPoint 2007, it is as follows:
Error Signature:
AppName: powerpnt.exe AppVer: 12.0.6500.5000 AppStamp:49a68f9d
ModName: flash10u.ocx ModVer: 10.3.181.34 ModStamp:4e011a1d
fDebug: 0 Offset: 003a893c
Of note is that this behavior does not happen in PowerPoint 2003 nor does it happen when the file is saved as a SWF and launched directly in the browser on the problem machines.
I have to assume that this has happened to others so any help you could provide would be VERY appreciated.
Thank you

Hello,
on the first glance I see these: data="file:///Macintosh HD/Users/user/Documents/Website/Working.swf", what means the path to your swf file is pointing to your local hard drive which nobody can see except you. Please replace all thes pathes with the correct ones and load up your file(s) again.
If the problem remains, please send a link to your website in question, no matter how it looks like..
Hans-Günter

Can't embed a Captivate video (swf) into Power Point 2007

I am trying to embed an Adobe Captivate video (swf) into power Point 2007. I very carefully followed all the steps outlined from a search I did on the web and it is not working.
These are the steps I followed:
1. Create a simulation using Adobe Captivate and publish it as a SWF file.
2. Open the PowerPoint presentation and insert a blank slide for adding simulation.
3. We need to work with the Developer tab now. If you can't see it in the ribbon, follow these steps to make it visible.
(steps to get developer)
4.On the developer tab, in the Controls group, click More Controls
5. In the list of controls, click Shockwave Flash Object and click OK.
6. Drag diagonally to create a box in which the simulation would appear. Don't worry about sizing it accurately; you can adjust it later as well.
7. Right click the Shockwave Flash Object, and then click Properties.
8. On the Alphbetic tab, click the Movie property. In the value columnm type the full drive path, including the file name.
9. Set the Playing property to true, Loop to false and Embed Movie to true.
10. Close the Properties dialog and test the movie.
The simulation will now play in your PowerPoint presentation.
Note: If during the slideshow,t he simulation doesn't play automatically, right-click and select Play.
I followed these steps, and it is just not working. I go to play my power point presentation and set it to play from the beginning, and when it gets to the slide with the swf file, I just get a faded out still picture of the video, and it will not play. If someone has had luck with embedding swf files from Captivate into Power Point, please let me know how you did it. Thanks.

Thanks, I really appreciate the information. The only problem is that I have to keep it as a power point presentation. I convert from ppt to a video, so I need to keep it as power point.
I found these steps on the internet and followed them exactly, and went through the steps 3 times, to make sure I wasn't leaving anything out, and it just didn't work. I have a tech guy who's supposed to call me today regarding this issue, and hopefully he'll be able to go through it with me step by step to try and work it out.
Ultimately, these are going to be training videos that are going to be set up on a website, so they ultimately have to be saved as videos.
I'm keep trying to figure it out though.
Thanks.
Ariane

Embedding a PDF file into PowerPoint 2010, clickable in SlideShow mode

If you embed a PDF file into PowerPoint slide by both draging and dropping or instering it as an object, only the first page of the PDF is embedded as a picture or you can change it to a PDF icon.
When in design mode, the embedded PDF is clickable and is opened in Adobe Reader (either from the PowerPoint slide if directly insterted or from its physical path if linked depending on the configuration).
But in slide show mode, the picture or the icon is not clickable.
The only workaround is to assign a hyperlink to the picture or the icon (the insterted object).
Is there any other way in opening a PDF file from PowerPoint Slide Show without assigning a hyperlink ??

Hi,
Assign a hyperlink is the only way to accomplish Open file (.pdf, .docx, .xlsx) from PowerPoint Slide Show.
From PowerPoint slide show, it only identify the file with hyperlink.
Best Regards.
William Zhou
TechNet Community Support

Flash Player Plugin 14.0.0.145 can't view swf embedded in the powerpoint anymore?

Flash Player Plugin 14.0.0.145 can't view swf embedded in the powerpoint anymore?

Hello,
There is a known issue with Flash not working in Power Point in Flash Player 14.0.0.145. It will be fixed in the next release. In the mean time, you can download a beta build containing the fix at http://www.adobe.com/go/flashplayerbeta.
If you have comments on the beta build, please post them at Flash Player Beta Channel, instead of here on the 'Using Flash Player forums.
Maria

Embedding YouTube video into PowerPoint for Mac

How can one embed a YouTube video into PowerPoint for Mac 2010? The video tutorials do not show the same Power Point (for Mac) that I'm using. Even if I can just save (and retrieve) the file I just might be able to convert it to an MP4 for YouTube. I've tried keepvid and it wants a valid file format. The default is a text which doesn't work. I've spent about 8 hours over the past 2 days trying to figure it out. HELP!!!!!!

Mac Office Powerpoint

Embedding SWF into Powerpoint 2007....

Similar Messages

Maybe you are looking for