Embedding video imports in separate folders

hi
i have my videos as a mp4, webm and ogv but when i import them into my document it imports them as separate folders instead of one folder with the three formats in them
any ideas why?
emily

By "Folders" do you mean Symbols? Do you have the files named exactly the same? The only thing different should be the file extension. For instance, you need to make sure your video files are named similar to this:
"Video01.mp4" "Video01.ogv"
"Video02.mp4" "Video02.ogv"
NOT
"Video01mp4.mp4" "Video01ogv.ogv"
"Video02mp4.mp4" "Video02ogv.ogv"
That was a mistake I made early on.

Similar Messages

Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

It is a hard one.. laptops with small drives are a pain.
What you need is a home media server.
Some people use a PC running itunes for cost.. but that is nothing like as good as using a Mac mini.. they make great little HTPC device.. you can plug in large hard disks and store all your files and media. And share it with the network.. Read up apple's instructions on home sharing.
https://www.apple.com/au/support/homesharing/
For cost you can buy a mini from 2011 or 2012.. I would not recommend earlier ones.. the advantage of 2012 is they have USB3 ports. But you will pay more for them.. new mini is not as useful.. they have soldered in memory and you cannot upgrade.. the old mini was the most easily modified mac in the whole range. Uses little power and can be bought for a $300US for a good one second hand.. maybe less.

How do I import my (many) videos so iMovie separates them by the date they orig. were made?

How do I import my (many) videos so iMovie separates them by the date they orig. were made?
(Like iPhoto does with photos) But not one at a time! If that is not possible with IMovie, can iTunes do that?
I want to import my videos from an external drive to my Mac Book Pro 10.8.3. Thank you so much for your time and patience.

Hi Walter,
Welcome to the Support Communities!
The article below will give you some insight as to how iMovie organizes video:
iMovie '11: Organize your video
Organize the Event Library
When you import video from your camera into iMovie, you name the video (called an Event), and then by default iMovie lists it in the Event Library by the date it was recorded.
To separate clips in the Event browser by the days they were recorded, choose View > “Show Separate Days in Events.”
You might want to do this if you have any Events that contain video that was recorded on more than one day. For example, an Event could have video recorded on New Year’s Eve and on New Year’s Day. To find specific clips more easily, you could separate the footage by date.
I hope this information helps ...
- Judy

Playing hidden embedded videos in swf?

Hi all,
A plea for help with a problem encountered.
Firstly a big thank you for the help recieved in solving a previous problem, with animations not resetting themselves of frame reset!
My next issue is as follows:
The project I am working on involves a lot of video and Flash games that use video as part of the game. The current animation has 5 videos embedded and are set to .visible=false at the very start. The user is then asked to drag an object over various parts of an image. If they drag the object to the wrong part of the image, the video is set to visible.true and is played. On video completion it is set to .visible=false and the original image is displayed with the user given another attempt at dragging the object to the correct area of the image.
The game works perfectly when published in Flash, but on import to captivate, I get the dragable object and the image, but when the object is dragged to the incorrect sport, nothing happens and the video is not played. The whole animation just freezes :-(
So, does anyone else have any expereience with hiding/playing embedded videos in an animation with captivate? Any tips?
Thanks for any help!
Tristan

You've got to be kidding me.
One and a half years ago, the product manager (Dennis Griffin) almost sounds surprised to learn that people actually want to use some of the features of Acrobat within the Adobe Reader app. Fast forward to today, and nothing has changed. Adobe Reader still can't play videos, still doesn't offer most of the interactive features that the PDF format (wasn't that your baby, Adobe?) provides, and still is the most basic of apps. Granted, you can get a third-party app like "PDF Expert", but I find it hard to justify to my customers to stick with the PDF format if they need to purchase a separate app just to use their files, because Adobe hasn't managed for the last 18 months to get their own technology working.

After updating to Flash version 11.6.602.171 - can no longer play any embedded videos..and worse

To begin with, I'm running a clean AMD 64 Bit Windows 7 System. Never any problems with any of my video playing scenarios - until now - with this version 11.6.602.171.
After downloading and installing both versions - both for Firefox (other browsers) and IE, none of my browsers can play videos unless they are at their lowest resolution of 240.
So I used the Adobe Flash Uninstaller and ensured that the last vestages of Flash Player were removed - and reinstalled - all to no avail.
Then I downloaded the archived version of 10.3 to see if a previous version would work. But that wouldn't work either. None of my browsers will play videos now and I'm talking:
IE 10
Firefox 19.01
Avant Browser
Google Chrome
Google Chromium
Commodo Dragon
Commodo Ice Dragon
Opera
Waterfox
Pale Moon
None will play the video.
What you get is the video screen but unless you have a 240 option (lowest resolution), all you get is a green screen. You hear the talking/music, but there is no picture and all the green screen does is flash. Here's a JPG of the screen. If you put your cursor anywhere on the progress meter (arrow) it will show you a small image of what's supposed to be playing (see below), but the screen remains green and flashes while playing.
Now here is where it gets interesting. When I completely uninstall Adobe Flash Player and then go to a You Tube embedded video (on any site), there first appears a screen that tells you that you need a plug-in - but then within seconds (without downloading anything), the movie starts playing normally.
I then checked my Firewall (Zone Alarm) - turned it off temporarily - that wasn't the problem. Then checked my latest version of Avast AntiVirus software and temporarily turned it off - that was not the problem either. The videos still won't work and remain green unless you use the lowest resolution.
So this new version 11.6.602.171 has become a nightmare - but I'm afraid it messed up my system big time and I don't know what to do to alleviate this.
Crying HELP!!!!!!!!!!   Is there something I'm overlooking. I'm now screwed - way to go Adobe for releasing such a faulty software product.
Ben Herrmann
North Carolina

It sounds like we've got a number of *different* problems on this thread. I'll try and respond to a few of them.
@filter 2.5 and everyone else running into a green screen issue. Please try the solution outlined in the post below to see if it will allow you to use hardware acceleration. The other alternative is to try a different ATI driver.
http://forums.adobe.com/message/4865912#4865912#4865912#4865912
@pipseer - Somehow Internet Explorer's activex filtering was enabled on your system. This troubleshooting is also described in this FAQ: ActiveX Filtering in Internet Explorer
@Sahloknir - For the sound issue, we're going to want your system specs. Please start a new thread with:
Operating   system
Browser
Flash   Player version
Dxdiag Report Instructions
Sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video
@mem2013 - The Flash Player update service will not impact Flash Player's performance. This is a separate service that runs for just an instant on your system once an hour (if you have automatic updates enabled.) Changing it from manual to automatic shouldn't make any difference.

HT1386 I deleted all my photos in the Camera Roll folder,I created separate folders containing all my pisctures. When I sync my iPhone it shows that all the pictures are loaded. But nothing displays on my phone?

Hey Guys,
I need some advice. I had about 9000 pitures and photos in my camera roll folder.
I wanted to manage all these pictures into separate folders for easier access.
I imported all the pictures onto my pc, and created and managed the pics.
I synced the phone and excluded the photos,as advised on the site.
The I disconnected the phone, connected again and included the pictures.
On the coclour tab it indicates that all the pictures are there, after syncing,
but on my phone, nothing appears.
Am I doing something wrong? Is there another way of importing my pictures
onto the phone and keeping the separate folders?
Thanks,

If you don't find an iTunes backup as suggested above, another possibility is that the phone was setup to automatically back up to iCloud. You can go to Settings > iCloud > Storage & Backup > Manage Storage to see if your device name is listed there. If it is, the section titled "How do I restore an iCloud Backup if my device is already set up for use?" in the following link gives directions on how to resore it: http://support.apple.com/kb/TS4036
Also, I'm sorry to hear you lost 5 years of pictures. Having them in one place (as you unfortunately found out) is not a good idea as all kinds of things can happen including loss of the phone. If you have a computer it is a good idea to periodically import them to the computer where you can see that they have successfully transferred to a second location. Following is instructions on how to do that if you want to in the future: http://support.apple.com/kb/ht4083

HT3481 Panasonic TZ40 camera, single video import problem

Connecting my new Panasonic TZ40 camera by cable to my iMac (lion OS- iMovie 11) uploads stills OK but video is a problem, the camera format is AVCHD. A single video uploads 9 separate files - see below - and without the audio sound track.
.MTS .CPI .CPI .MPL .TDT .TID .BDM .BDM .DAT
The .MTS has a big memory (the others are very small) and will play in VLC player I have on my Mac, but without sound. I tried running it through a video convertor software which converts it successfully to AVI without audio, as you would expect because the original has no sound in the .MTS file.
I was aware that Mac did not readily support AVCHD in the past but was assured by the Camera shop that it was now OK - which it plainly is not. Is there an easy workaround without losing the HD quality, or would I be wise to take it back to the camera shop and choose another camera manufacturer that is more compatible with a Mac, if so what make would other members recommend.
My previous camera was a Samsung which recorded AVI files which I uploaded and was able to import into iMovie without any problems.

I have sorted the sound issue, it was an unrelated problem to the Panasonic TZ40 recording.
However, I think there may be a misunderstanding of the importing of the video/movie from the camera. I import the camera stills and video/movies directly into a computer folder through the Adobe Bridge 'Get images from camera' icon. I do not want to import video/movies directly into iMovie as I do not always need to edit them imediatly (if at all sometimes) and I prefer the originals to be in a folder. I have tried settings of 50 and 50i but still get the same results.
I have converted the .MTS file to a .AVI (and other formats) which iMovie successfully opens, but the .MTS file at 100MB is reduced to 50MB in .AVI and others. My concern is that one of the reasons I bought this camera was for its HD1920 video/movie, if the pre edited conversion is going to reduce the quality then the camera does not do what I asked of the seller.
Basically if I cannot make use of the HD1920 facility in this camera then I need another make which will import an HD1920 video/movie in a format that Mac can hold in a folder and iMovie can import at that quality. If anyone has any recommendations I would be glad to hear them.

Embedding video in an embeded SWF

Hello people. I'm building a site with a flip book component.
The book is a movie and then I load the pages via an XML file. The
pages are SWF files. You can see the book at
http://www.thiez.com/evf/main.htm
Now, If I add a video on a particular page by embedding it in
the flash movie, I will be able to see it when I test that
particular page, but it wont show when I test the whole book. So
basically, my problem is: the video shows ok in the file where it
is embedded but not in the main SWF file that calls the SWF file
containing the video. Any idea will be appreciated.
Dani Szwarc
Thiez Multimedia
www.thiez.com

there sure are a lot of angry peeps on this forum lately.
Hard to tell exactly what you are doing -
allow me to quote you:
"I am importing Mpeg2 into an embeded video in SWF and play
timeline"
not exactly sure what that means - are you importing an mpeg
into flash to the timeline?
you cant import into an embeded video - that sounds like you
already have a video file in your FLA
and are trying to import another video "into" it - cant be
true and must be a typo.
Make it easier for us to help you by explaining in detail
what you are doing.
Also - this is a volunteer based peer to peer forum - it is
not official adobe support - you need to
contact them directly if the issue can not be solved here.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
RichKrose wrote:
> It is obvious to me that developer do NOT look at these
forums? A crash is
> ridiculous and I find NO help from Adobe. How simple can
this be? Importing
> Mpeg1 or 2 into Flash (only 7M) as a progressive
download. I cannot believe it
> is a codec problem. Is there anyone at Adobe with a
conscious that is willing
> to help? I spent 800$ for this package? I must be crazy.
>

Video Import problems

Hi Everyone,
I wonder if someone could advise about a problem? We have a
number of video clips from a client in WMV format and wish to
import into Flash 8. We did this without any problems and created
the flv files using the video import wizard. The client however
wanted us not to include the audio as is was really just background
factory noise. During the video import steps - Encoding, I selected
'Show Advanced Settings' and unticked 'Encode Audio'
Now however the video doesn't import at all and an empty
SWF/flv file is produced. Am I doing something incorrectly or is
there a better way to 'remove' the audio?
Any advice greatly appreciated
Many thanks
Dave

Hi christopher,
If the video is large, iPhoto has a problem importing it sometimes.
My camera can take large size videos so I import all my images and video clips with Image Capture. I put all the images in a dated folder ready for backup and also import them into iPhoto.
I put all my video clips in dated folders and keep them in my Movies folder to use for projects in iMovie and iDVD and they are also easier to backup this way.
Lori

Video imported all on one clip..

Video did not import into separate clips. Its all on one clip. How can I get imovie to make separate clips for editing? Original video is gone. Its on imovie6.

Hi Dixie
Where Do Your material originate from ?
• miniDV tape Camera (recorde with this live)
• from VHS/VCR via miniDV Camera or A/D box
If the latter - there are no Time & Date code that gives info to iMovie where to cut.
There is no function in iMovie that can produce couts from variations in picture or audio. (either in FinalCut Express/pro as I'm aware of)
It has been reported that it can be done on PC-Window platform and by programs like
Pinnacle, Adobe Premiere etc. NEVER Confirmed though.
If timecode not present - Manual cutting up only way. (As I know of)
Yours Bengt W

Embedded Video Audio Sync Problem

I have been exporting Flash Video from Adobe Premiere
Elements 3.0. I import the .FLV into Flash 8 as embedded video. The
published .SWF works fine, audio and video start in sync and stay
in sync, but about 3/4 through the video, audio stops.
This occurs no matter how short or long the exported clip.
I did my best searching through these forums, looking for an
answer to this issue, but have had no success.

Do you need to embed the FLV file in the SWF file? I would
recommend playing the FLV as an external file. If you need to use
embedded video, make sure the frame rates are identical (SWF and
FLV). I can't remember if Premiere Elements enables you to output
with Raw audio for FLV files, but Flash 8 (or CS3) will recompress
an embedded video's audio track on publish/export--so, try to use
Raw if you can to avoid recompression. This might have something to
do with your problem too, the recompression of the MP3 audio track
in your original FLV when re-exporting as embedded video in the
SWF. (Your audio stream setttings in the Publish Settings control
the quality/recompression of your FLV output when embedded in the
SWF.)
HTH.

Flash Video Import Skins

I've noticed that many of the flash skin players won't work
with the File-Video-Import option. I can get the skins that are
titled "Over " to work fine. But the "External" skins that wrap
around the actual flv. won't show up on export. All files located
in proper place. I've used several skins to double check. For
example ArcticOverNoVol works, while MojaveExternalAll wont show.
Size setting is 400 x 276. I'm wondering if there is a bug in this
section, I've noticed a lot of people dealing with this. Anyone
know the answer to this?

Click on whatever your using to display the video, whether it
be actual video footage embedded or your using an Adobe video
player component to display it while the footage is hosted
remotely.
Then go to the top toolbar dropdown Window > Component
Inspector.
If your video object is embedded on the stage, look in the
Component Inspector window, on the Parameters tab, there will be
options, one of them is autoPlay, set that to False.
If you are using one of Adobe's pre-built components to
display your video, click your player, and in the Component
Inspector there will be a checkbox labelled "Automatically Play",
uncheck that.

Embedded video only plays once

I have created a PDF from a Word document. I am now at embedding videos (MP4). I am using the advanced option to play the videos in a floating window. When I play them back on the host computer it works fine. I can start a video, activate the controls and close the window, then restart and the video and it re-runs OK. However when I save the file and try and run it on another computer (without the full Acrobat) the video runs fine the first time, but when you rerun it it pops up in a blank window. If you click on the window boundary and drag it the video suddenly appears, but it will not appear as it should just by clicking the link on the PDF. Any suggestions?
PS I have just noticed that another large PDF file was open in a separate window, closing this appaers to have fixed it, but I dont think this behavior should happen.

Sounds like an issue with your display driver - video playback targets the driver directly, and some combinations of graphics card and display driver don't like more than one application hooking the video buffer at the same time.
Please log a bug report with complete information about your hardware (graphics card, display setup, driver versions, OS, etc.) - although I don't believe it's an Acrobat bug, it will help engineering to nail down what's causing it.

Keynote - problem with playback of embedded video

Hi All - I have embedded a .m4v movie in to my slide show (I 'dropped' it in). I check it - all looks fine as I want it to and I then record it. I export it as a Quick Time Movie.
But on playing the movie of the Keynote slide show after it has recorded, the embedded video just appears as a black square with no image and a few seconds of faint speech.
I have searched forums but a clear answer has not appeared.
Please advise me on what to do!
Thank You!

Hi Gary, well, things have now become a bit more complicated....... For some reason I can not locate the original project in iMovie...... (If you have any light to shed any light on that too - that would be great as I did nothing after Exporting. Assumed I'd saved it - though it automatically saves anyway - I thought.....)
So, I have had to import the already converted m4v back in to iMovie as an Event and then re Export as per your suggested H264.
Dropped back in to Keynote. Played the Slide Show. All fine. Recorded it.
Played it back and all there is, again, is a muffled sound track and a black box with nothing happening at all!
So, the glitch seems to be in the interface with the recording. It does, at ground level play within Keynote but the exporting and sharing is what I am requiring it for.
I really do need this film to work. Any further suggestions please?
Thank You.

How to import 2 separate audio tracks and keep them separate?

I need advice about importing two separate simultaneous audio tracks and keeping them separate. I am importing footage from my Sony PDX-10 DV Cam.
In the field I had wireless microphones on two people, a man and woman. I interviewed them separately. The man was on channel 1 and the woman was on channel 2.
While shooting the man, for example, I could also hear the open mic of the woman who was maybe a block away talking to some friends. But her distracting sound was on CH 2 and in playback on the camera, if I dial down the volume of CH 2, I no longer hear the woman and I have a clean audio track, Ch 1, of the man who is being filmed.
I'm trying to import the interviews into iMovies with only the relevant track turned up and the distracting track turned down. When I listen to the audio from the camera on my headsets, I can get clean sound of just the person who is on camera. But the FIREWIRE seems to grab both tracks, even though in playback i'm listening only to the clean track.
Does anyone know how I can send just one audio track to IMovie? Any way to prevent the Firewire from importing both Ch 1 and Ch 2 at the same time?
I only want the sound that's relevant to the person who is on camera. And I know that in the camera, it's possible to listen to just the track from one channel. I'm hearing just one track through the headsets, because I can sucessfully dial down the other track. That's the way I want to import the footage to iMovie. But the FIrewire seems to grab all the sound it can find and carry over both CH 1 and CH 2, which means I'm left with a jumble of sound that is not useful.
And finally, if the firewire needs to grab both tracks, is there a way to assign them to two separate tracks in iMovie, so I can then simply turn one of the tracks off?
iMacG5 Mac OS X (10.3.9)
iMacG5 Mac OS X (10.3.9)
iMacG5 Mac OS X (10.3.9)

welcome finecut to the  boards of discssions ...
nope.
iM handles the two stereo-channels as "one track", and offers 3 tracks of stereo.. (the one inside the video, 2 additional tracks...)
I would... :
* export clip(s) share/Quicktime/Expert Settings/aiff..
* in a designated audio processor (Garageband, Audacity, ...) seperate the two channels, creating two "new" ones, stereo, where one channel is located in the stereo middle..
* import these two "stereo" files into iM, into Track2 and Track 3 ...
.. boom!done

Embedding video imports in separate folders

Similar Messages

Maybe you are looking for