Embedding video to an embedded flash file
Hello people. I'm building a site with a flip book component.
The book is a movie and then I load the pages via an XML file. The
pages are SWF files. You can see the book at
http://www.thiez.com/evf/main.htm
Now, If I add a video on a particular page by embedding it in
the flash movie, I will be able to see it when I test that
particular page, but it wont show when I test the whole book. So
basically, my problem is: the video shows ok in the file where it
is embedded but not in the main SWF file that calls the SWF file
containing the video. Any idea will be appreciated.
Dani Szwarc
Thiez Multimedia
www.thiez.com
No they are not. The pages are withing a folder called
"Pages", and the FLV files too. The main book file that calls the
pages is on the root folder. I'm not at home now, so I will have to
wait until I can test this, but you think this might be the issue?
Thanks a lot for your input, I'll let you know as soon as I
check that out.
Similar Messages
-
Help required in embedding flash file object into Crystal Report file.
Hello,
I use the default version of Crystal Report (i.e.'Crystal Report Basic For Visual Studio 2008 - version 10.5' ) which is the part of 'Visual Studio 2008', to create and display the Report. Further, as a requirement, I have to show 'Event Video' into the Report. But, as this default version of Crystal Report does not support Flash File, I uninstalled it and downloaded and installed the 30 days trial version of the Crystal Report (i.e. Crystal Report 2008 - version 12.0).
Then, I created a new Crystal Report File using 'Crystal Report 2008 Designer', embedded the video as a Flash File(i.e. SWF file) into it. Now, when I add this newly created Crystal Report File into my sample application, which is created using VS 2008, it does not shows the embedded video.
So, can anybody please tell me, how can I embed the Flash File into Crystal Report, so that it will be visible in the sample application?
I would like to appreciate your help and support.
Thanks,
-Yogesh.Symptom :
When embedding a pdf document into a Crystal Report, only the one page shows.
Reproducing the Issue
Environment:
Crystal Reports OLE object
Cause
An OLE object only displays the first page.
Resolution
Embed multiple objects, one for each page
Or
Use a hyperlink to the object instead
Hope this helps!
Regards,
Vinay -
Synching Issues with Self-Paced Learning and Embedded Flash Files
Hi Everyone,
I'm having some issues with my files not properly synching or displaying when Self-Paced Learning is active.
Here is my set-up:
Captivate 5
5 separate Captivate files combined using the Aggregator
Each Captivate file is about 15 slides
Each slide contains an audio file (for closed-captioning) and a single SWF file - the content is all created with Flash and then inserted into Captivate using Insert > Animation
Each SWF file is back 1/10 of a second from the beginning of the Cap timeline (otherwise there are rewind issues when the user selects the slide they are currently viewing from the ToC)
Each embedded SWF has the beginning and ending fade built into it; Captivate is not doing any fading
Synch to Project is selected for each embedded SWF (although it doesn't seem to work all the time)
Self-Paced Learning is active, as well as, Enable Navigation
It is not being loaded to an LMS or using any built-in Captivate quiz features. These are instead custom built AS3 Flash files that are embedded.
Windows 7, 4GB RAM, 1GB Video Card, High-end Processor, etc... a beast.
The Issue:
When the user opens the course, views it for a while and then closes it and returns it will display the first slide of the course for a moment before jumping to the bookmarked slide. This slight timing misstep causes the bookmarked slide to get out of synch. It will sometimes not display the bookmarked slide at all or it will cut-off a small bit from the end of the slide (even with Synch to Project active). It sometimes works fine but randomly will break. The course is set to 100% preload and nothing is being loaded from an external location. It seems to work fine until Self-Paced Learning is activated.
I don't think this is a common development approach for Captivate but it has been very successful with some clients. Has anyone encounted similar issues or does anyone have some suggestions that might resolve this problem?
Thanks!
GregIt's been mentioned many times on this forum that nesting Captivate SWFs inside other Captivate SWFs gives rise to all kinds of strange issues. Captivate was not designed to work this way. If you choose to do it, and you encounter issues (as you have done) there's usually NOT a lot you can do. There are just too many ways the SWFs can get into bun fights over which one does what.
I suggest you rethink your approach to avoid nesting. -
Embeded Flash files stop loading part way through after update to 10.2
Hello, I am currently having an issue with Flash. After the last update to 10.2, flash files, both audio and video, stop loading part way through them and do not start up again. For instance, on youtube, about 2 minutes worth of video will load but load slowly and then stop completely. The only way to get it to advance is to click past the section that has loaded and it will load the next 2 minutes. On Myspace Music, a song plays about 40 seconds each time and stops completely and will not load anymore, even if I try to skip to another part of the song. I am running Windows 7 Ultimate 64bit edition with Firefox 4.0 Beta 12 64 bit edition as well. Also I have tried clearing my cache, cookings, temp files, removing and installing Flash countless times, including older versions, as well as tried Google Chrome and IE. All give me the exact same issue no matter what I do. It is really frustrating because I cannot watch or listen to anything embeded in Flash online without having to keep clicking the next section every little bit. If anyone can help, please do and I thank you.
Hi, Since your OS is a 64bit, are you using the 32bit browser for IE? I see you have the FF beta. Have they come out with a 64bit browser? I don't follow the FF beta so if that's true, it's news to me.
Let me know,
Thanks,
eidnolb -
Hello,
as far as I know, it is now possible to include flash movies in pdf files that can then be viewed with Adobe Reader.
I am more interested in controllable flash files with for instance, a slider that control a mathematical parameter of a curve for instance.
Let's simply imagine the function f(x)=sin(ax) where parameter could be controlled by a slider to graphically see how f(x) depends on a.
Is this possible with flash files? If yes, could then these files be embedded in pdf files?
thank youYou can embed any SWF file in a PDF using the tools in Acrobat Pro. There are security restrictions on local file access and shared storage of data, but in terms of graphical display and interaction with the user they can do whatever you want - it's a Flash programming question rather than a PDF question.
-
Problem with Embedding Flash Files
So I'm trying to embed a video I made in flash. I took the file and out and put it into my sites folder and copied some code to place it as an object in my web page via an html snippet. The strange thing is that when I view the video at its URL: http://web.mac.com/jlamb33/docs/success07.swf it looks fine, but when I put it into a page like: http://web.mac.com/jlamb33/AKPsi/Success.html it gets really small and I lose the controller bar. Anyone know what's going on?
Well, the reason I created it in flash was because a lot of my friends couldn't view the video with quicktime, because they don't have it. Anyway, I tried your setup and I can't seem to get it working properly. I copied the anplayer.swf file into my sites folder and copied the code into a snippet but nothings coming up. One thing I noticed is that the source file in the code was changed from the .swf file to .flv&. I didn't realize that was a valid extension, but I could be wrong. Any ideas on what's going on? I republished that page with a new snippet under the working movie and as you can see...there's nothing there. http://web.mac.com/jlamb33/AKPsi/Success.html
-
Embedding flash files -- using swfobjects ?
hi all .. i've been posting flash files on my site for a year or so now, using artotems code. i find that it plays back erratically, sometimes on (what else?) IE machines ... i've just been delving into the world of swfobject. does this help your flash files play back in a stable manner across all browsers ? and is there an easy way to use it, or does it require advanced code monkey work ? i've spent some time looking for a user-friendly site ... can't seem to find one, and i would appreciate any help.
thx.hi all .. i've been posting flash files on my site for a year or so now, using artotems code. i find that it plays back erratically, sometimes on (what else?) IE machines ... i've just been delving into the world of swfobject. does this help your flash files play back in a stable manner across all browsers ? and is there an easy way to use it, or does it require advanced code monkey work ? i've spent some time looking for a user-friendly site ... can't seem to find one, and i would appreciate any help.
thx. -
Embedding Flash Files on a Blog
Greetings to everyone. I tried this query on the Flash forum,
and it doesn't look like anyone's biting over there, so I figured
I'd try it here: I'm looking to embed flash files (swf & flv)
on a Movable Type blog, but I can't seem to figure it out. I do
this all the time with Dreamweaver, but never tried until today to
embed Flash stuff into blog entries. I know I'm missing something
obvious here, but I don't know what.
I know this isn't related to Dreamweaver per se, but I think
it must have something to do with HTML code (or else a plug-in I
don't know about). I don't know - I'm just confused about how to do
it!
Any help would be greatly appreciated - thanks.here is a forum that may help:
http://forums.sixapart.com/lofiversion/index.php/t15406.html -
Problem with embedded flash file
My flash file plays properly , when previewed in any
of 3 browsers via Dreamweaver 8.0.2 , but never appears at all when
I bring up the site as an anonymous viewer . I note that if I try
and reload the whole site using a client ftp instead of the
in-built "put" feature in DW , I get a message that "unable to
complete ,because of problem with a file or files" ( I paraphrase)
but that ftp program has no way of identifying which files are the
problem- and there are 600 or so in the site ( site is
www.OrchidsAndMore.org.uk - if it might help to see - the flash
file should be in the middle of the first page.well, you can 'label' some frames to link inside your flash to those as a 'page'..
But i've allready found it myself :-)
I just had to put 'anchors' in place of 'labels' and than put like: 'index.html#thepage'
super easy!
thanks anyways -
Opening a video in a seperate flash file
Hi i am currently designing a site for a client and i need to be able to have 2 seperate flash files one with a video playlist in it and the other as a video player in a seperate file. Is there a way to link the 2 files and make them interact with each other?
Would i be better doing this entirely in HTML?
Any help would be greatly appreciated.
OGBYou can talk between movies using javascript as the middleman. Here's a link that provides some information on that...
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15683 -
Embedding flash files for an ebook
Hello,
I would like to embed 50 one minute flash videos into a 100 page ebook. Each video is about 5MB. I was told I should use Acrobat 9 to do this. Does this mean the ebook will be more than 250MB (50 x 5MB) or is there a way to compress the entire ebook?
Thanks in advance,
Kidd in ParisNot sure as I've never had that many flv's in a PDF. There is a trial available; Might as well test it yourself.
-
Embeded Flash file .. need to center
After creating a dynamic site via Flash, I'm experiencing
issues with centering it on the html page. I've tried all of the
regular fixes of <align = center>...but it's not reading it.
Someone told me that it takes a bunch of code to do..but I don't
recall entering a great deal of code previously.. Could someone
please help me out on this one?? THANK you!!Hi Jacob,
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Interactive Site</title>
</head>
<body>
<table width="900" border="0" align="center"
cellpadding="0" cellspacing="0">
<tr>
<td><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
width="900" height="600" title="Interactive Site">
<param name="movie" value="flashfile.swf" />
<param name="quality" value="high" />
<embed src="flashfile..swf" width="900" height="600"
quality="high" pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash"></embed>
</object></td>
</tr>
</table>
</body>
</html>
Try this .
I hope this helps.
Regards,
Shanthi -
Working with Muliptle videos in the same flash file
I am trying to figure out the best way (steps) to put 3
videos into one file and allow the user to select whcih one they
want to play at any point. Can someone please tell me if I have
this basically correct... . (And please correct any terminolgy
mishaps b/c I am still confused when I hear flash movie versus
movie clip vs video vs flash video.)
1. Convert original .wmv files to flash video files (.flv)
2. Create individual swf files that each contain one flv with
it's corresponding playback controls
3. Create video 'player' that contain movie symbol instances
that are controllable from this file.
4. Create user control buttons to allow the user to select a
different active movie symbol
Does this make sense?
Please help before I have to outsource this just to get it
done.
Thanks,
ChrisThanks for the leading David,
I actually do have specific questions but I am testing the
theory from this
[L=[L=http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=194&threadid=117 2529&enterthread=y">post...]http://<B[/L]]http://www.adobe.com/cfusion/webforums/forum/mes sageview.cfm?catid=194&threadid=1172529&enterthread=y[/L][/L]
I just confirmed that the file works on another server. But
Now I am need of killing the choppy viewing. Any ideas why it would
view like this? [L=http://centerforathletes.com/flash/[/L]
You can see alla the source files at
http://centerforathletes.com/flash/gotoandlearn.fla ( The
name of the individual files are in the actions layer and the files
are all in the same directory.
ANy help is appreciated.
Chris -
Embedded Flash in PHP - Need help!
Hello everyone!
We're having problems embedding Flash-files into our .php-files, so I thought the best place to ask for help would be the official Flash-forums :-) First of all, I'll let you know what exactly we're doing....
We have a few flash-files which you should only be allowed to view once you're logged in and authenticated to our "portal". You can only view those files over some sort of JavaScript-Popup-Flashplayer thing (personally not too much into JS). The JS-Player requires the flash-files to be available over an exisiting URL (such as http://page.domain/flash/file.swf) - And this is where the whole problem begins...
After hours of research and conversing with my collegues and the project-management, we decided to use the following technique to still keep those URLs for the JS-Player while preventing the user from simply accessing our "top secret flash movies" by typing in the URL in their browser...
We move the Flash-folder to a location outside of our document root -> Flash-files can't be randomly accessed or downloaded via the URL.
We use an Apache-plugin called "mod_rewrite" to rewrite/redirect URLs that look similar to http://page.domain/flash/*.swf to a PHP-file -> We can work with REQUEST_URI to see which flash-file the user wanted to view. Now, inside that PHP file we check wether the user is authenticated or not and either embed the flash-file into the PHP-file or redirect him to an error-page. In theory, the user could still view the flash-file over the URL (without even noticing PHP, since the URL stays http://page.domain/flash/file.swf, hence a perfect fake, no? ;-) ) and everything actually works exactly the way we wanted..........IN FIREFOX!
Now we went live with our application and we had to realise that one of the only things we haven't tested in other browsers (this being one of them) don't work the way we want and instead of viewing/playing the film, we get to see a white window in the JS-Player, while it's trying to download a file called "filename_swf" (underscore instead of dot?) when you access the movie over the URL (http://page.domain/flash/file.swf).
How we embed Flash into PHP:
Headers + outputting the flash-files content....
header('Content-Type: application/x-shockwave-flash');
header('Expires: Thu, 01 Jan 1970 00:00:00 GMT, -1');
header('Cache-Control: no-cache, no-store, must-revalidate');
header('Pragma: no-cache');
echo file_get_contents($request);
As I said, this works just fine in Firefox, however we're sure most of our users will be using IE, in which it doesn't work at all. I personally believe we're missing some sort of header or we have to set a different header depending on the browser...so I thought the best place to ask about Flash Headers would be the actual flash forums. Maybe I'm even totally wrong and missing out something crucial and someone can point me in the right direction...
Thanks!Thank you for your help.
I have uploaded the skin to the same directory as the video.
It's now showing. Do I have to reference it on the code?
http://www.custommlmleads.com/test.html
skin :
http://www.custommlmleads.com/VIDEO/SkinUnderPlaySeekStop.swf
Thank you -
I am trying to find out if there is any way to have the HTML
send informaion to the embedded FLASH file. I need to change 2
peices of information on the FLASH file when it loads on the page
(based on the page it comes up on.) Is there a way to have the HTML
send a message to FLASH that says use "pic_2.jpg" or a way for
Flash to look into the HTML to find its directive. Better yet, is
there a way to let flash know what file it is within, and search
the XML file based on the parameter of location? Please
help.Hi adjourney,
External images should work in the same way (via flashvars).
You can do
this in a two step process as you suggested, or directly via
the
embedding variables. I'll assume you want the simpler of the
two so you
would do something like this:
The HTML embedding code would look like this:
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0"
width="354" height="63" id="myFlashThing" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="flashvars" value="imageFile=myImage.jpg"
/>
<param name="movie" value="flashFile.swf" /><param
name="quality"
value="high" /><param name="bgcolor" value="#cccccc"
/> <embed
src="flashFile.swf" quality="high" bgcolor="#cccccc"
width="354"
height="63" name="forumLogo" align="middle"
allowScriptAccess="sameDomain" allowFullScreen="false"
flashvars="imageFile=myImage.jpg"
type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
Notice that you need to include the file name two...once as a
"param"
and then again in the "embed" tag. This is done to compensate
for
differences between FireFox/Mozilla browsers and
InternetExplorer-style
browsers.
In Flash, getting the image file name couldn't be easier. In
ActionScript 2.0, this is simply available as:
_level0.imageFile
In ActionScript 3.0, this is available as:
this.loaderInfo.parameters.imageFile from the class that's
associated
with the main movie clip (the Document class).
Now you simply take this value and use a loadMovie or Loader
instance to
get your image.
If you wanted to specify an XML file and then some identified
within it,
the flashvar would look something like this:
xmlFile=data.xml&offset=5
And this would be received as two separate values in Flash:
_level0.xmlFile and _level0.offset (and the associated ones
for AS 3).
Of course this is a bit of overkill...if you're specifying a
file and
then hardcoding a link within that file...you might as well
specify the
file right off the top. But I guess that's up to you.
Good luck,
Patrick
adjourney wrote:
> It seems that through this I can change the text
contents, but what if I wish
> to point to an external image, and want to load that jpg
into an empty movie
> clip within Flash. How do I do that? I suppose I could
assign a value to a
> variable (say "image" = 5) and then look up the XML to
pull the variable (grabs
> image definition 5, and pulls the referenced image). Am
I on the right track,
> or am I shooting beyond capability (of my own I am sure
- but what of Flash)?
>
http://www.baynewmedia.com
Faster, easier, better...ActionScript development taken to
new heights.
Download the BNMAPI today. You'll wonder how you ever did
without it!
Available for ActionScript 2.0/3.0.
Maybe you are looking for
-
OK... I've read several threads, and there doesn't seem to an answer out there... The other night while updating my Nano (the second day I had it) it disappeared from the source list and hasn't reappeared. About half of my MP3s updated to it before i
-
Any certification for wd abap?
Hi experts, I like to know whether there is any certification particularly for webdynpro abap. If yes, then wat is the preferred book or material for that one and the eligibility criteria for that one. If possible explain me abt the certification
-
URGENT: Parse Logical Operator.
Hi there: I'm having some difficulties to parse some conditoional operator. My requirements is: Constants value: int a=1,b=2,c=3 Input/Given value: 2 conditional operator expression: d=(a|b|c)&d Expected result method:false Summary: I like to receive
-
Workflow Canceled Error in Sharepoint 2013
A new SP 2013 installation, one server with SP, WF, etc and the other is simply SQL Server. Went through the installation steps for Workflow including the powershell bits. In designer, I am able to create a simple workflow and select 2013 as the type
-
How to save mac compatible ai eps and pdf on windows
how to save mac compatible ai eps and pdf on windows