Embeded flash error message

Not sure if this is where to post this but here goes. I have
a C# app that uses a web browser control to open a swf file located
either on a local hard drive or on a network drive. The local hd
file opens fine, the same file on the network sends an invalid
character error for lines 1 and 0. since the error is not in the C#
code I get no debug information and therefore believe this to be a
plash player incident. Anybody here with any like this?

Hi Mitch
From simple experience and experimentation I've determined
that this message means the following:
This error manifests under the following conditions:
You used the MenuBuilder application to create output that
exists as a .EXE file and the output contains a link to a .SWF that
cannot be found.
When this happens, a very generic error of $ is not a valid
integer value will display inside a dialog titled "FlashPlayer".
I suppose this could also happen if you were linking from a
Captivate created .EXE file. Not sure. Perhaps you will be able to
confirm or deny that.
Cheers... Rick

Similar Messages

When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected."

When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected." iPhoto eventually launches but iTunes will not launch iTunes. iPad will not charge. Restarted iMac and rebooted iPad and no difference.

Hi GJ374,
Thanks for using Apple Support Communities. This article has steps you can take for issues with your iPad not being correctly recognized in iTunes:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Ari

NEC 3540A Flashing Error Message

Forum Members and Adobe Staff,
I know this isn't an Encore issue. My luck is poor today. I tried to upgrade the firmware in my NEC 3540A drive to firmware 1.04 and received a flashing error message in the beginning of the process. I waited and finally cancelled the update after the process stopped. My drive is the master drive and I disabled the secondary hard drive as suggested. No other programs were open. After the flashing error message I rebooted my computer and tried the burner. The burner still lists the older firmware version 1.03 yet. I just burned a DVD image using ImgBurn and it burned the DVD okay. How do I know if it's burning DVD's correctly now after I received the flashing error? I have updated firmware in drives many times and I have never had a problem until now. I followed the NEC instruction but something went wrong. Any suggestion on how I can tell if the burner is working correctly? Do I need a new burner as a result of the error?
With Appreciation,
Don

Ruud,
Thanks for the suggestions. I checked out the burner and it's an NEC. I purchased it from Newegg.com. I read the notice. I just tried updating the firmware with version 1.04 again with the same error message. Then I tried the burner and it still shows the last version 1.03 but it still works and burns fine. I've updated this burner before so I'm stumped. I'm wondering if I should move the burner to my main computer and update it there. It has a newer P-4 processor, etc. I can always move it back again. This has me real puzzled. Any more ideas?
With Appreciation,
Don

Get the "cannot extract embedded fonts" error message

I get the "Cannot extract embedded font 'UZNVZW+HElveticaNeueLTStd-Hv-Identity-H'. Some characters may not display or print correctly." error message when I generate a PDF from MadCap Flare or Frame Maker. I am on Windows 8 64-bit / Adobe Acrobat 11 / FrameMaker 9 / MAdCap Flare 9.
When I do the same task on a Windows 7 system, works like a whistle.
I am looking at a solution and no workarounds.
Regards,
AxDe

Hi hartmanja14,
Please let me know if this is happening with all PDFs or any specific document?
Also, tell me if that document has been created by any third party or not.
Regards,
Anubha

Flash error message

Since downloading the latest version of the Flash player, I
continue to get an error message that pops up on my desktop. The
window reads "Error (in the header) Could not find the Macromedia
Flash." When I push OK it goes away for about 5 minutes, but then
it comes back and it also comes up every time I turn on my
computer. It appears that some program or what not is looking for
the Flash player, but the Flash player program is not where it
should be or the program is looking in the wrong place. How do I
find out what program is looking for the Flash player and tell it
to either look somewhere else or just stop looking? Or do I need to
do something else? I'd appreciate any help.

Hi Mitch
From simple experience and experimentation I've determined
that this message means the following:
This error manifests under the following conditions:
You used the MenuBuilder application to create output that
exists as a .EXE file and the output contains a link to a .SWF that
cannot be found.
When this happens, a very generic error of $ is not a valid
integer value will display inside a dialog titled "FlashPlayer".
I suppose this could also happen if you were linking from a
Captivate created .EXE file. Not sure. Perhaps you will be able to
confirm or deny that.
Cheers... Rick

Flash error messages

I'm using Flash .SWFs that incorporate the Flash zoom and pan component. When I import the .SWF into Captivate, I get an error message (Error #2044: Unhandled ioError:. text=Error #2035: URL Not Found. URL: file:///C:\Documents and Settings\Desktop\Testing\ILS13L.jpg).
However, the .SWF imports without a problem. Every time I click on the slide in the Captivate project, I have to "dismiss" the error to continue.
It all works fine in the published Captivate .SWF. It's only during editing that it is a problem.

I've branched this into a new discussion. The other thread wasn't really manageable, and I wanted to make sure we tracked and responded to this.
Were you able to get this issue resolved?
If not, what's the error message that you keep getting?

Flash error message appears since Windows 8 install

Ever since I installed Windows 8, Flash does not work properly in Firefox. If I visit a page which has Flash elements, I repeatedly get the error message:
"The instruction at 0x718e0000 referenced memory at 0x718e0000. The memory could not be written. Click OK to terminate the program."
This message keeps reappearing countless times when I press OK. I have tried updating Flash, uninstalling and reinstalling, reinitialising the plugin database etc.
Any help would be appreciated, thank you.

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Incomprehensible Flash Error Message?

Hi, this tiny window appears on top of Flash (I think) videos in Safari 6.0, running in Lion 10.7.4. When I click on the "don't" symbol, it disappears. I can't read it, I'm not even sure it's English. Anyone know what it is?
This is actual size, by the way. It's tiny.
Thanks in advance!

I have some more info, it's a Macromedia error message. Clicking on the question mark takes me here:
http://www.macromedia.com/support/documentation/en/flashplayer/help/help06.html
So it's an error from Flash saying I don't have enough local storage.
However, their version of the error message is clearly in English.
Anyone have any thoughts about why mine is gibberish?

Update Adobe Flash error message

Hello,
Whenever I am using standard search function in Safari I am getting "Update Above Flash plugin" error message. ***?
I use iPhone 4 with ios 6.0
Thank you.

iphone does not have flash installed read https://discussions.apple.com/message/19605280#19605280

Embedded font error message

PDF file in Telugu language will open on computer but the same PDF file will not open from a web site. Error message about embedded fonts that only displays numbers or English words. The web link is www.labiblefacon.com file is under Message of reconciliation any suggestions?

Thanks for your reply
Google search finds the site but Yahoo displays what appears to be French.
I failed to provide the complete link information. It should be
http://www.labiblefacon.com. After selected from browser listing, on the
left side box click on The Message of Reconciliation and when opened
click on lesson 2. ఆది మానవుడు
<http://www.labiblefacon.com/PDF/MOR/2.%20Ealry_Man-Telugu2.pdf>, this
is a PDF file
Only a few pages are available as the site is in the process of being
translated
The page appears to have been written in the Gautami font which is one
of the fonts on MS Word. Adobe reader shows 4 pages but very little is
displayed mainly periods, commas and numbers. To me this implies Adobe
does not recognize the Gautami font.
Randolph

Vista-switched from Explorer to FF 3.6- can't download versions/updates like Adobe Flash-error message: INSTALLER WILL CONTINUE AFTER CONFLICTING MOZILLA FF IS CLOSED-Most pics blocked on sites/programs-can't open some programs that Explorer opens- Help?

I have Vista, recently switched from Internet Explorer to FireFox 3.6-. Since switching over, it can't download alot of versions/updates like Adobe Flash: It error messages: "INSTALLER WILL CONTINUE AFTER CONFLICTING MOZILLA FIREFFOX IS CLOSED".
Most pics blocked on sites/programs. I can't open some programs that Explorer opens. I would sure appreciate any help!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases. Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Flash error message MX 7.2

On launching Flash MX 7.2 I receive this error :
Flash MX 2004 has encountered a problem and needs to close
along with other information relevant to the message.
It is an intermittent error, however when it occurs I
essentially cannot use Flash and so cannot open any files.

"unimelb" <[email protected]> wrote in
message news:e7qj9e$j46$[email protected]..
> On launching Flash MX 7.2 I receive this error :
>
> Flash MX 2004 has encountered a problem and needs to
close along with other
> information relevant to the message.
>
> It is an intermittent error, however when it occurs I
essentially cannot use
> Flash and so cannot open any files.
It can be caused by a bad font on your computer. (it happens)
tralfaz

Downloading Flash - error message

While downloading a newer version of flash, I get a message to shut down Internet Explorer. I shut down the sessions that were open, but cannot clear this message. How do I resolve this?

Download the Adobe Flash Player installer directly by right clicking the following link and selecting "Save target as".
Flash Player for ActiveX (Internet Explorer)
Save it to your downloads folder and close Internet Explorer. Reboot your system, so NOTHING is running but Windows. THEN run the installer.
Then check the following:
Enabling Flash Player in Internet Explorer
ActiveX Filtering in Internet Explorer

"Could not load Shockwave Flash" error not solved from common fix.

I am using Google Chrome as my web browser and I am getting the, "Could not load Shockwave Flash" error message. I have googled it and followed the common fix, however it does not fix anything. If I disable the plug-in then it prompts me to install Flash Player when I view videos and if I try to install Flash Player it tells me that I already have it installed, but it is disabled and to re-enable it. I've done about all I can think to do, please help?

You cannot:
-download
-install
-repair
-update
Flash Player for Chrome from here. Chrome uses a proprietary build called PepperFlash. It's modified by Google before they embed it and Adobe doesn't have downloads for it.
You can try the following:
1. Exit chrome, make sure it is not running
2. Using Windows explorer go to C:\users\[user name]\AppData\local\Google\Chrome\User data\Pepperflash
3. Delete the folders you see there
4. Start chrome again.
Notes:
[user name] is your logon name.
In order to access the AppData folder, you need to "Show Hidden Files and Folders" in your Folder Options.
If those steps fail, the ONLY way to repair it is to uninstall and reinstall Chrome.

Why do I get a "script error" message from Adobe flash player? It is installed as a part of my browser.IE 11

Why do I get a "script error" from flash player when it is not installed separately? It is part of my browser--IE 11

Same error message, I disabled tab mix and made sure I only have the newest version of Java, restarted firefox, now it seems to be fine no error yet on Pogo games or pictures upload to ebay which were the biggest problems besides hanging. I had also had disabled AVG secure search yesterday but that did not solve the issue. Now I will try to add back in AVG search...I have very few adds ons, also the note embedded about re- installing a toolbar went away, my old one did not work with FF4, so I installed Yahoo toolbar but the message still did not go away until I applied this fix. Hopes this helps someone..

Embeded flash error message

Similar Messages

Maybe you are looking for