Embeded text problem

I'm using Flash CS3 with AS3. I have now tried to make a
datagrid full of information and put it behind a mask so it can be
showed when told to. Anyway, the only text that has appeard is the
static text. So is there anyone that can explain this to me and
show me how to embed fonts to a datagrid object.
//Mario

just enable the html property of your textfield. if you're
having trouble, post your code.

Similar Messages

How to extract Chinese text from font embedded text PDF?

This is actually font embedded text PDF (Used: type 1 fonts & custom encoding) and not scanned PDF, however I am unable to extract the "Chinese language" text properly and found only the garbled text when "Copy & Paste" (or save as RTF). Kindly refer the sample PDF attached for your reference.
Kindly advise how could I solve this problem.
Thanks in advance for your better solution.

As I was unable to upload the sample page PDF in my original thread, I have shared now in the following path. Kindly look into this and guide me how to extract the chinese text as UNICODE text.
Downloading: Chinese_Text_Extraction.pdf - Uploadingit

Why are equally layouted embedded texts in an eps-file saved differently?

Hi everyone!
I have a problem with the LaTex package "PSfrag" which is supposed to filter out any specific embedded text of an eps-file in order to re-layout it. Obviously the programm only recognises text-tags in the output eps-file that are formatted like:
(text-tag1)sh
whereas the other text-tags are followed by further strange information like
(text-tag2)
[3.74512 3.74463 0 ]xsh
I've created the eps-files via Adobe Illustrator and I've set all texts the same way only to find that Illustrator has saved some texts in the first and others in the latter way. I would be most happy to know why that is so and how I could accomplish the )sh-ending throughout the whole eps-file for every text event so that "PSfrag" can work out well. I'd appreciate it if anyone can give help...
Christian Klaessen
here's an excerpt from the eps-file. The (100) is recognised, the (10) not.
.85547 .84766 .78516 1 cmyk
ITHHBA+ArialMT*1 [5.61461 0 0 -5.61461 0 0 ]msf
1.85693 132.332 mo
(10)
[3.12256 0 ]xsh
10.9219 23.1924 mo
19.8354 23.1924 li
.855469 .847656 .785156 1 cmyk
.85547 .84766 .78516 1 cmyk
ITHHBA+ArialMT*1 [5.61461 0 0 -5.61461 0 0 ]msf
.29541 23.1924 mo
(100)sh

I guess it's the old gag of "appearance over structure" which also makes AI's SVG files so unworkable at times... What might be causing those differences is impossible to say without seeing the files, but it would appear you have a custom line height in your non-working example, causing it to be required to be written differently. I'm sure Gernot Hoffman can answer this more specifically...
Mylenium

Not all chinese characters display correctly with non-embedded text

Hi all,
I've updated to the last beta 2 of Flash Player 10.1 (10,1,51,66) and compiled this simple Flex application to illustrate the fact that not all chinese characters can be displayed correctly with non-embedded text (device font).
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/halo"
               minWidth="1024" minHeight="768"
               creationComplete="resourceManager.localeChain = ['zh_CN'];"
               layout="{new VerticalLayout()}">
    <fx:Script>
        <![CDATA[
            import spark.layouts.VerticalLayout;
        ]]>
    </fx:Script>
    <s:Label text="伜-伞伟传伡伢伣伤伥伦伧伨伩伪伫伬伭-伝">
    </s:Label>
    <mx:Label text="伜-伞伟传伡伢伣伤伥伦伧伨伩伪伫伬伭-伝"/>
</s:Application>
Notice that characters from the Unicode range 0x4F1E .. 0x4А2D are not displayed within <s:Label> component that uses Flash Text Engine (FTE) by default to display the text, but at the same time those characters display just fine within older <mx:Label> component that relies on flash.text.TextField instance to render the text.

    OK, did not know that "Arial Unicode MS" font is only distributed with Microsoft Office, was looking into relying on this font in case if "simsun.ttc" font is not available at the user's system, by using the following:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx"
               minWidth="1024" minHeight="768"
               creationComplete="resourceManager.localeChain = ['zh_CN']"
               layout="{new VerticalLayout()}">
    <fx:Style>
        @namespace s "library://ns.adobe.com/flex/spark";
        @namespace mx "library://ns.adobe.com/flex/halo";
        s|Label {
            fontFamily: "Arial Unicode MS, SimSun, Arial";
    </fx:Style>
    <fx:Script>
        <![CDATA[
            import spark.layouts.VerticalLayout;
        ]]>
    </fx:Script>
    <s:Label id="sparkLabel" text="伜-伞伟传伡伢伣伤伥伦伧伨伩伪伫伬伭-伝"/>
</s:Application>
Tough decision ahead, but accordingly to the survey at codestyle.org (2000 participants from 2007 year and onwards), Arial Unicode MS is present at 62.53%% system surveyed.
ps
   My current install of Windows XP already includes the install of Microsoft Office 2007 and I've also enabled/disabled the support of East Asian languages, thus the content of my "fonts" folder differs now significantly from "clean" Windows XP install version.
Nevertheless I found the page with comprehensive lists of standard fonts installed with different releases of Windows that looks viable here: http://www.kayskreations.net/fonts/fonttb.html

Lines around type and other type/text problems in Dreamweaver CS3

Dear Dreamweaver forum:
Good news/bad news,
First the good news…
My thanks to a forum member by the name of Mylenium. With Mylenium's advice I have improved my halo problem by including a black background when I save type in Illustrator CS3 as part of importing it into Dreamweaver CS3.
However, the bad news, is that I’m still having type and text problems.
Problem area 1
Now, in Dreamweaver, I’m getting lines appearing around the type.
I am dragging and dropping the .gif type file into a Dreamweaver Div Tag.
How do I get rid of the lines around the type so that they do not show up in the Safari browser?
(Please see below)
Problem area 2
I cannot drag and drop text from a Word .doc file into a Dreamweaver div tag.
I also cannot copy and paste Word .doc text into a div tag.
How do I include text on my webpage without having to manually type it in?
(Please see below)
Any help would be appreciated. Thanks!
From within Dreamweaver CS3, how do I place text? Dragging and droppign the file does not work.
This is screenshot of what I see so far when I use Safari to test what I have made so far in Dreamweaver CS3.
I get lines around type.........not usually a good thing.........How do I fix it?
The way I created the portfolio type in IllustratorCS3 using the File > Save for Web and Devices. I then imported the resulting .gif file so that it was within my root folder within the Files panel within Dreamweaver CS3.
Am I doing this right?

Hi
The problems you are experiencing with the image text, (why are you using image text, these days?) is probably cause by the image having a border when created in illustrator, or the image size being set incorrectly.
As for the word text if you are using windows, see http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ce6.html.
On the mac it is a little more complex, save your word doc as html, then apply the 'clean up word html files', (see - http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ef5.html) copy the relevant text and mark-up from the word html file, and paste into your html document in the required position.
PZ
www.pziecina.com

Export H264 pass-through movie with embedded text track QuickTime Pro 7 Windows?

Using QuickTime Pro 7 for Windows, I add a text track with closed captions to my H264 .mp4 videos.
The text track works great until I try to export it. After I've added the text track, the text track is displayed as long as the track is selected to be active using the Movie Inspector track GUI.
My movies are encoded as H264 for cross-platform compatibility, and need to remain in this format. The only way to save them in QuickTimePro 7 for Windows is to Export Movie to MPEG-4. I select Pass-Through mode to retain the resolution and bandwidth parameters that I initially encoded the video with.
Unfortunately, after I export to MPEG-4, the caption track is lost. It disappears. When I open the newly exported MPEG-4 caption file, and select Movie Inspector, the caption track is missing. Inspector only shows video and audio tracks.
If QuickTime Pro 7 for Windows correctly exported my text track with the video and audio tracks, then users would be able to view the closed captions upon playback in QuickTime Player by selecting View--> Show Closed Captioning (Ctrl+Alt+T).
Anyone been able to export to MPEG-4 pass-through movie with embedded text track QuickTime Pro 7 Windows?
Thank you!

Sorry here is the code
<body>
div id="myAlternativeContent"
a href="videofolder/video.mov"
img src="videofolder/video-poster.jpg"
/a
/div
</body>
videofolder/video
Message was edited by: SFlocation
Message was edited by: SFlocation

Workaround for the Fade/Appear blocky text problem in IE

Just wanted to share with folks a workaround for the IE
"blocky text" problem that you see when using Fade effects like the
one used in this example:
http://labs.adobe.com/technologies/spry/samples/data_region/DetailRegionEffectsSample.html
It turns out if you set the 'background' CSS property on the
element you are fading, that IE properly renders the text. So to
fix the effects sample above, all you would have to do is modify
this CSS rule in the file to place a background color on the
description region to get things to look good in IE:
#description {
opacity: 0;
filter: alpha(opacity=0);
background: white;
So if folks have been avoiding the use of effects because it
makes things look terrible in IE, you now have a workaround.
--== Kin ==--

I was using spry's AppearFade effect to transition between
"slides" in what equates to a viewstack that I created.
Then I noticed that it would take bold text in IE and make it
look all smudgy or blurry.
Well, after working on it for a while, I got to thinking,
"This problem is specific to text rendered in MicroSofts
browser"... "Hmmm, I wonder".
So, I tried using this style rule: [ font-family:"MS Sans
Serif",Arial, Geneva, sans-serif; ].
Lo and behold, feed the stupid MS browser an MS font and it
does not blur the text.
I just wanted to get this our there. Because someone might
want to solve this in a way where they don't have to set a
background color...

E6 Big Texting Problem

Can anybody help me out with this problem?
My E6 has developed a texting problem, whenever I send a text none of the text appears in the conversation speech bubble, just the date or time when it was sent and the character "0". Does anyone know why?
Thanks
Solved!
Go to Solution.
Attachments:
Text.jpg ‏1560 KB

Would suggest that you backup E6-00 using Nokia Suite, then reset device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user). Perhaps restore contacts only and try out texting/conversations before restoring device any further.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Nokia C3-00 texting problem.

Hello everyone, this is my frist post on here. So i bought the nokia c3 and unlocked it from the vodafone network. I use my 02 sim now. I just discovered something that annoys me and need help getting rid of it.
My problem is that after every text send the phone virbates letting me know that i have sent the text and my balance comes up. how do i change the settings so that this doesn't come up. Really annoying as i've just got a new number and sent out a mass text to everyone. The phone vibrated for like 2 minutes straight!!
Any help greatly appreciated. Thank you.

At the phone store where I bought the Nokia C3 they removed the Vodaphone presets ( since I have another provider ) and they also updated my phone with the latest software available ( see below ).
But now I have a serious texting problem!
If you type the Q you get an A , a=q , z=w and w=z .
Also after you typed something and you delete the text and reopen the textbox again this word will reappear on a blue underscore?? Anyone any idea what's happened or had the same problem??
The phone's update info:
C3-00
V04.45
04-08-10
RM-614
Variant: 00.00
Vitual variant: No Virt. Var.

My book was rejected for containing images with embedded text. Does Apple not make exceptions for graphic novels, etc.?

I created my first book with iBooks Author, and am trying to publish it as a paid book in the iBookstore. It is a book of writing and photography, and each page contains one or more photographs. Some of the photographs are of handwritten notebook pages, and these are an essential and expressive part of the book. The handwritten notes were written when taking the photographs, and the book is a thoughtful visual journal about walking and photography. Replacing the handwriting with typewritten text would not work at all.
However, Apple rejected my book because "Embedding text in images creates issues that cause a large number of customer complaints."
I understand the reasoning behind this requirement, and certainly it is appropriate for most books. But does Apple make exceptions for books that need to present text visually? I would call my book an "artist's book", but it could be thought of as a graphic novel. Surely there are other books besides mine that require text embedded in images.

This sounds like something you have to take up with Apple directly rather than here in the user/user forums. You might want to try the contacts listed at the bottom of the FAQ:
http://www.apple.com/itunes/content-providers/book-faq.html
It might be helpful to find some things in the store yourself that demonstrate such exceptions, so you can ask for equal treatment.

Text Problems in Safari 4

Just this morning I started to experience bad text rendering problems in Safari 4. I am seeing text that overlaps on other text, text that leaves a button and crosses over into the space next to it, text that is truncated on buttons, image alignment problems, and more. Typing in text boxes is a problem, too -- the cursor doesn't display at the point where text is actually being inserted, but several characters off.
It doesn't affect every site -- Google and Netflix look OK, while Apple and Facebook are strongly affected to the point of being almost unusable. Firefox and Chrome on the same laptop are working fine. Other programs on the system, like TextEdit, are fine, too. I have tried changing the default font preferences in Safari, but while the text size changes on certain pages, the overlapping text problem isn't helped.
I have screenshots of the issue -- how do I post them?
Does anyone else see this issue? Many thanks for your opinions and advice?
Safari Version 4.0.3 (6531.9)

Where did you get 67 errors? http://jigsaw.w3.org/css-validator/validator?uri=http%3A%2F%2Fwww.totallybarbado s.com%2F shows the only error is the "pre" tag which are necessary hacks for formatting the "pre" tag. The other "warnings" are no different than checking apple.com http://jigsaw.w3.org/css-validator/validator?profile=css2&warning=2&uri=http://w ww.apple.com
They also do not assign background-color to "every" css element. Why would you (to bloat CSS)? So, there is exactly "one" error which is well documented and is supported in CSS2.1 when released.
The problem is that Safari does not adhere to white-space or "pre" tags (preformatted text). This has been an ongoing problem since it's incarnation. All other browsers (FireFox, Netscape, IE, Opera, Mozilla..etc) do. http://www.w3.org/TR/1998/REC-html40-19980424/struct/text.html#h-9.3.4
edited: Sorry, had to edit as this forum software actually rendered the <"> tags (without quotes)

Weird texting problem

I have a Z1s running 5.0.2 and I'm not a big texter. I'm using the stock apps for texting and contacts. I was trying to send a text to someone I had never texted before. I brought up their contact page and pressed the little text icon and I got a texting screen except that it was covered by a menu that had options like 'add video', 'add picture' and a bunch of others that prevented me from actually being able to text. The options did nothing and the back arrow also did nothing, so I was prevented from composing and sending a text. I sent the text I needed to from my desktop using mighty text. When I received a reply, I was prevented from reading it by the same menu which still did nothing. That was yesterday. Today, the menu was gone and I could read the return text. For a while though, I was prevented from reading any other text I had received. I would press on one and the first one I looked at came up instead. Then that went away after a while and things seemed to have returned to 'normal'. I really don't understand what is going on with my phone. I like the phone and I love the battery life, but this bit of weirdness and the fact that some apps that worked just fine on my N4, don't seem to work at all on the Z1s. I have an app named Move that counts your steps during your day. It worked just fine on my N4, but on the Z1s it's only counting maybe 1-3% of my steps. It says I walked 89 steps yesterday and that is absurd. I assume that the app uses the accellerometer to do its work. I have another app that uses the gps for tracking and it's not registering anything even though the gps seems to be functioning. And the phone doesn't have as good a connection during calls as my N4. I get a lot of static and breaking up during calls that I never got on my N4. 99% of my calls are made and received at my home, so that is what I'm comparing. Anyone have any clues as to what is going on here? The update to lollipop was done through the pc connection. Any additional updates have been done OTA. I haven't rebooted in a while and I think I'll try that first. TIALT

The texting problem has gone away for a while, so I can't take a screen shot. I loaded the suggested messaging and google fit. I don't like changing apps if what I had worked under lollipop on my N4 and now that I have the Z1s also running lollipop they don't. It seems to me that Sony must have something to do with this problem. Either the hardware or the software (os) is significantly different (inferior). The gps tracking app I'm using is called Bubbler. I tested it today and it only registered my location a handful of times instead of the every 5 or 10 minutes like it's supposed to. To me this indicates that the gps is not functioning properly. The phone and the sim card are about a month old and it came as a micro sim. I don't mean to be a whiner, I'm just confused and disappointed that things are not functioning as I expected. And on top of all that, the call quality is less than stellar. SorryLT

Firefox pdf viewer garbles embedded text on some of our pdfs (on Mac OS Mavericks). They're fine in Safari or when downloaded. This is a major problem.

Firefox pdf viewer messes up text on pdfs and makes them unreadable. These fonts are embedded, so there shouldn't be a problem. The pdfs are fine when viewed in Safari or Chrome browsers. Also fine when viewed through Acrobat. Telling me to change my default browser isn't good enough. Visitors to our web site won't know this.

The latest stable and latest development versions of the built-in PDF viewer are available as an extension and these version can possibly perform better than the version shipped with the current Firefox release.
Latest development version of the PDF Viewer (pdfjs) extension:
*http://mozilla.github.io/pdf.js/extensions/firefox/pdf.js.xpi
Latest stable version of the PDF Viewer (pdfjs) extension:
*https://addons.mozilla.org/firefox/addon/pdfjs/

Embedded Text - Animation problem

Hi All,
I'm having a strange problem with animated text and embedded fonts. The best way to explain is to show you...
When I don't embed the font, the problem goes away. It happens in both IE and Firefox and on multiple machines. I've also tried different fonts with the same results. I've also tried recreating the FLA from scratch with no luck. Also, after the page loads, the "streaking" effect goes away if I resize the page.
I am using CS4/AS3. Any ideas what is going on here?
Thanks.
- Adam

then there wouldn't be any problem. you must be doing something else.
to confirm, create a new project that contains just your timeline tweened text. retest.

Selecting Embedded Bitmap Text - Problem

I tried to create a Flash TextField, containing Text with
maximum sharpness.
So i embedded Verdana Font Size 8 as Bitmap Text, and set
sharpness and thickness to my benefits.
Now the Text ist displayed cleary, but if you try to select
or write into the text box it really suxs:
The Cursor position gets a higher distance to the text while
the text line gets larger.
Anyone know this problem, i searched this forum but i didnt
find a solution about this prob.

I assume you opened a new Gateway session after you have added that parameter and that you see it in the trace file....
There's a trial ODBC driver from DataDirect (www.datadirect.com) available for download and which you can test. Check if that driver works. If yes, make sure you have the latest ODBC driver release applied to your env that matches your configuration and if needed ask the ODBC vendor for help.
- Klaus

Embeded text problem

Similar Messages

Maybe you are looking for