EMC Recoverypoint

Has anyone used EMC Recovery with an Oracle database for Disaster Recovery purposes. Any gotchas or information that may be helpful for a new implementation? What can I do with recoverpoint that I can't do with data guard or another Oracle technology?

I'm not sure what you mean by DR in this case -- storage snapshots are a way to recover from logical problems, but don't help you when the SAN / data center have a problem. Data guard lets you have a remote standby database that is up to date and not dependent on the same storage device.
The database should be in hot backup mode when the snapshot is created to account for inconsistency in the scn / contents of a datafile.
Oracle has a white-paper on how to use storage snapshots:
http://www.oracle.com/technology/deploy/availability/pdf/oscp_snapshot_use.pdf
One quote (emphasis theirs):
"Storage Snapshots can also be used for implementing a *very limited* HA solution."
I'm not familiar with EMC Recovery, but NetApp has a tool that will interact with Oracle to get everything into hot backup mode as needed, so perhaps EMC does this as well.

Similar Messages

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

EMC Crash when i try to - reset client access virtual directory

Hi All,
I have one exchagne server 2010 sp3 rollup 7 installed on server 2012R2 Std.
When i try to reset client access virtual directory the MMC is crashing.
In the event viewer i can find 3 error after to crash:
1.
The program mmc.exe version 6.3.9600.17415 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 2360
Start Time: 01d04e7b531a4a0d
Termination Time: 4294967295
Application Path: C:\Windows\system32\mmc.exe
Report Id: 69db84d3-ba91-11e4-80c3-0050569b5787
Faulting package full name:
Faulting package-relative application ID:
2.
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.OnThreadException(Exception e)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
3.
Faulting application name: mmc.exe, version: 6.3.9600.17415, time stamp: 0x54504e26
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
Exception code: 0xe0434352
Fault offset: 0x0000000000008b9c
Faulting process id: 0x2014
Faulting application start time: 0x01d04e9e432feaef
Faulting application path: C:\Windows\system32\mmc.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: b8276755-ba91-11e4-80c3-0050569b5787
Faulting package full name:
Faulting package-relative application ID:
When i try to preform the task from EMC that installed on my PC (Win 7 SP1 x64) everything works fine
Thank you.

Hi Eliran,
Thank you for your question.
Are there any update recently?
We could refer to the following steps to troubleshoot:
1)disable A/V
2) Run: DISM.exe /Online /Cleanup-image /Restorehealth
http://support.microsoft.com/kb/947821/en-gb
3) follow http://support.microsoft.com/kb/929833/en-gb to upload %WinDir%\Logs\CBS\CBS.log
4) disable snap-ins exept DNS-snapin
5) run SDP
6) enable A/V
We could also re-install .Net 4.0 to check if the issue persist by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=17718
If the issue persist, we could install Exchange 2010 SP3 CU8 by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=45225
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

To whom it may concern Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E 2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in goo

To whom it may concern
Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E
2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in good shape I can prove it,the Apple support in Brazil doenst work like in USA.
I look forward to your reply and a resolution of this problem.
Thank you very much!!!

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Windows Server 2008 R2 Standard "Certificate Authority Service" / Exchange Server 2010 EMC not starting and no AD connectivity for authentication.

Hello,
I am a new IT Manager at this company and need assistance big time. Their environment looks as follows:
Server 1. Domain Controller Server (Windows Server 2008 R2 Standard) running active directory.
Server 2. Email Server (Windows Server 2008 R2 Standard) running Exchange Server 2010 .
* Note. No back ups to work with aside from whats mentioned below.
DC had a virus infection causing a lot of issues on the shared network drives 2 days ago locking up all the files with a crypto ransom virus. Running Avast suppressed the infection. Had to recover the file shares which luckily had a back up.
The issue is that the Exchange Server 2 post this lost connectivity with the AD Server 1. Exchange Server 2 when launching EMC could not launch the console stating the following:
"No Exchange servers are available in any Active Directory sites. You can’t connect to remote
Powershell on a computer that only has the Management Tools role installed."
Shortly after I found that it is possible the EMC launcher was corrupt and needed to be reinstalled following another blog post. I deleted the exchange management console.msc per instructions only to discover I couldnt relaunch it because there was
no way how. So I copied another msc file that happened to be on the DC Server 1 back to Exchange Server 2 and got it to launch again.
Another post said that it might be an issue with the Domain Account for the Computer, so to delete it in the AD Server 1 only to find that rejoining it from Exchange Server 2 using Computer>Properties> Chage Settings > Change is greyed out because
it is using the Certificate Authority Service.
I tried manually re-adding the computer in AD and modeling permissions after another server in group settings but no go. After this I was unable to login to the Exchange Server 2 with domain accounts but only local admin, receiving the following Alert:
"The Trust Relationship between this workstation and primary domain failed."
I tried running the Power Shell tools on Exchange Server 2 to rejoing and to reset passwords for domain accounts as noted in some other blogs but no luck as the Server 2 could not make the connection with Server1 or other errors it kept spitting out.
I also during the investigation found the DNS settings were all altered on both the Server 1 and Server 2 which I luckily was able to change back to original because of inventorying it in the beginning when I started.
I need help figuring out if I need to rejoin the Exchange Server 2 manually by disabling the Certificate Authority Service (or removing the CA as listed here:
https://social.technet.microsoft.com/Forums/exchange/en-US/fb23deab-0a12-410d-946c-517d5aea7fae/windows-server-2008-r2-with-certificate-authority-service-to-rejoin-domain?forum=winserversecurity
and getting exchange server to launch again. (Mind you I am relatively fresh to server managing) Please help E-Mail has been down for a whole day now!
Marty

I recommend that you open a ticket with Microsoft Support before you break things more.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Error when opening emc attachment in Thunderbird

When opening emc documents in Thunderbird after installing the Striata reader, I get an error message. See image for error message.

There is no image attached to your post.

Error occurs when running emcli add_target

Hello,
I created a simple plugin which contains only two target types for learning using JDeveloper (Build JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493). I then validated plugin distribution and created plugin archive on right-click project name.
plugin.xml content:
<?xml version="1.0" encoding="UTF-8" ?>
<Plugin xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="http://www.oracle.com/EnterpriseGridControl/plugin_metadata plugin_metadata.xsd"
        xmlns="http://www.oracle.com/EnterpriseGridControl/plugin_metadata">
<PluginId vendorId="z" productId="y" pluginTag="xxx"/>
<PluginVersion value="12.1.0.0.0"/>
<ShortDescription>Enterprise Manager for Second Target Type</ShortDescription>
<TargetTypeList>
    <TargetType name="z_y_xxx_Second Target Type"/>
    <TargetType name="z_y_xxx_Third Target Type"/>
</TargetTypeList>
<PluginAttributes Type="MP" Category="Engineered Systems"
                    DisplayName="Second Target Type"/>
</Plugin>
z_y_xxx_Second Target Type.xml
<TargetMetadata META_VER="1.0" TYPE="z_y_xxx_Second Target Type"
xmlns="http://www.oracle.com/EnterpriseGridControl/target_metadata">
<Display>
    <Label NLSID="Second Target Type_name">Basic Target Type</Label>
</Display>
<Metric NAME="Response" TYPE="TABLE">
    <Display>
      <Label NLSID="Second Target Type_response">Response</Label>
    </Display>
    <TableDescriptor>
    <ColumnDescriptor NAME="Timing" TYPE="NUMBER" IS_KEY="FALSE">
          <Display>
            <Label NLSID="Second Target Type_response_timing">Elapsed Time</Label>
          </Display>
        </ColumnDescriptor>
    <ColumnDescriptor NAME="Status" TYPE="NUMBER" IS_KEY="FALSE">
          <Display>
            <Label NLSID="Second Target Type_response_status">Status</Label>
          </Display>
        </ColumnDescriptor>
    </TableDescriptor>
    
</Metric>

</TargetMetadata>
Running Plugin validation ....
Validating Plug-in metadata ..                Passed
Validating Plug-in metadata semantics ..      Passed with warnings
Validating Staging Directory ..               Passed
Validating MRS Syntax ..                      Passed
Validating MRS Semantics ..                   Passed
Validating Metadata embedded SQL ..           Skipped
Validating Object Names ..                    Passed
Plugin validation Passed with warnings
Validation Report generated to: /tmp/xxxProject/dist/plugin_validation_report_131023.txt
Plugin validation completed.
Running Plugin archive creation ....
Validating Plug-in metadata ..                Passed
Validating Plug-in metadata semantics ..      Passed with warnings
Validating Staging Directory ..               Passed
Validating MRS Syntax ..                      Passed
Validating MRS Semantics ..                   Passed
Validating Metadata embedded SQL ..           Skipped
Validating Object Names ..                    Passed
Plugin validation Passed with warnings
Validation Report generated to: /tmp/xxxProject/dist/plugin_validation_report_131023.xml
Creating the opar file......
Plug-in validation has revealed some warnings. You must fix all these issues before releasing plug-in to production.
Successfully created the plugin archive . The opar file is /tmp/xxxProject/dist/12.1.0.0.0_z.y.xxx_2000_0.opar
Plugin archive creation completed.
Then I executed these commands:
./emcli setup -url=https://abc.com:7803/em -username=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserved.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in the help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
$ ./emcli import_update -file=/export/em_install/mid_home_loc/oms/bin/12.1.0.0.0_z.y.xxx_2000_0.opar -omslocal
Processing update: Plug-in - Enterprise Manager for Second Target Type
Successfully uploaded the update to Enterprise Manager. Use the Self Update Console to manage this update.
$ ./emcli deploy_plugin_on_server -plugin=z.y.xxx:12.1.0.0.0 -sys_password=*****
Performing pre-requisites check... This will take a while.
./emcli get_plugin_deployment_status -plugin_id=z.y.xxx
Plug-in Deployment/Undeployment Status
Destination          : Management Server - abc.com:4890_Management_Service
Plug-in Name         : Second Target Type
Version              : 12.1.0.0.0
ID                   : z.y.xxx
Content              : Plug-in
Action               : Deployment
Status               : Success
Steps Info:
Step                                     Start Time                End Time                  Status
Submit job for deployment                10/23/13 2:41:47 PM PDT   10/23/13 2:41:47 PM PDT   Success
Initialize                               10/23/13 2:41:49 PM PDT   10/23/13 2:41:54 PM PDT   Success
Install software                         10/23/13 2:41:55 PM PDT   10/23/13 2:41:55 PM PDT   Success
Validate plug-in home                    10/23/13 2:41:56 PM PDT   10/23/13 2:41:56 PM PDT   Success
Perform custom preconfiguration          10/23/13 2:41:56 PM PDT   10/23/13 2:41:56 PM PDT   Success
Check mandatory patches                  10/23/13 2:41:56 PM PDT   10/23/13 2:41:56 PM PDT   Success
Generate metadata SQL                    10/23/13 2:41:56 PM PDT   10/23/13 2:41:56 PM PDT   Success
Preconfigure Management Repository       10/23/13 2:41:56 PM PDT   10/23/13 2:41:56 PM PDT   Success
Configure Management Repository          10/23/13 2:41:57 PM PDT   10/23/13 2:42:39 PM PDT   Success
OPSS jazn policy migration               10/23/13 2:41:57 PM PDT   10/23/13 2:41:57 PM PDT   Success
Register metadata                        10/23/13 2:42:39 PM PDT   10/23/13 2:42:41 PM PDT   Success
Perform custom postconfiguration         10/23/13 2:42:41 PM PDT   10/23/13 2:42:41 PM PDT   Success
Update inventory                         10/23/13 2:42:41 PM PDT   10/23/13 2:42:42 PM PDT   Success
$ ./emcli deploy_plugin_on_agent -agent_names=abc.com:3872 -plugin=z.y.xxx:12.1.0.0.0
Agent side plug-in deployment is in progress
Use "emcli get_plugin_deployment_status -plugin_id=z.y.xxx" to track the plug-in deployment status.
$ ./emcli get_plugin_deployment_status -plugin_id=z.y.xxx
Plug-in Deployment/Undeployment Status
Destination          : Management Agent - abc.com:3872
Plug-in Name         : Second Target Type
Version              : 12.1.0.0.0
ID                   : z.y.xxx
Content              : Plug-in
Action               : Deployment
Status               : Deploying
Steps Info:
Step                                     Start Time                End Time                  Status
Submit job for deployment                10/23/13 2:43:44 PM PDT   10/23/13 2:43:44 PM PDT   Success
Initialize                               10/23/13 2:43:47 PM PDT   10/23/13 2:43:47 PM PDT   Success
Copy archives                            10/23/13 2:43:47 PM PDT   10/23/13 2:43:47 PM PDT   Success
$ ./emcli add_target -name="z_y_xxx_Second Target Type" -type="z_y_xxx_Second Target Type" -host=abc.com -prop="UseGeneratedData:false"
Error: Target type specified does not exist on this agent
This execution fails, but we see the plugin in the agent. The type we have is obtained from the plugin.xml,
<TargetTypeList>
    <TargetType name="z_y_xxx_Second Target Type"/>
    <TargetType name="z_y_xxx_Third Target Type"/>
</TargetTypeList>
Thank you for your help in advance!
Message was edited by: user13475271
I would like to mention that we also tried to add using Oracle Enterprise Manager (Version 12.1.0.3.0). Setup->Add target->Add Targets Manually. But under Add Targets Manually, there are three choices (radio buttons). We have tried all, but we didn't get it to add a target.

Why you need to run this report in R12?
Please see these docs.
Master Note for Diagnosing OS Memory Problems and ORA-4030 [ID 1088267.1]
Getting Started with ORA-4030 Diagnostics [ID 863562.1]
Diagnosing and Resolving ORA-4030 errors [ID 233869.1]
Thanks,
Hussein

Solaris 10connectivity to EMC: failed to configure ANY device on FCA port

I'm connecting a E2900 server with a EMC symmetrix storage with fiber channel.
But I'm getting the following errors, and I'm not able to see the external disks. Any help is really appreciated.
bash-3.00# cfgadm -al
c3 fc-fabric connected unconfigured unknown
c3::5006048c52a5b746 unavailable connected unconfigured failed
c4 fc-fabric connected unconfigured unknown
c4::5006048c52a5b749 unavailable connected unconfigured failed
bash-3.00# cfgadm -c configure c3
cfgadm: Library error: report LUNs failed: 5006048c52a5b746
failed to configure ANY device on FCA port
bash-3.00# tail -f /var/adm/messages
Nov 27 16:42:12 cosemm1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Nov 27 16:42:12 cosemm1 Unsupported LUN Addressing method 40 in response to REPORT_LUN
bash-3.00#
SO is Solaris 10 and I have installed recommended pathes:
118833-36 SunOS 5.10: Kernel patch
125100-10 SunOS 5.10: Kernel patch
120011-14 SunOS 5.10: Kernel patch
127111-01 SunOS 5.10: Kernel patch
119130-33 SunOS 5.10: Sun Fibre Channel Device Drivers (only necessary for Leadville Stack driver)
125184-04 SunOS 5.10: Sun Fibre Channel Device Drivers.
120222-21 SunOS 5.10: Emulex-Sun LightPulse fibre channel adapter driver v2.20k (only required for Emulex HBAs running Leadville)
125166-06 SunOS 5.10: Qlogic ISP fibre channel device driver v2.22 (only required for Qlogic HBAs running Leadville)
122640-05 SunOS 5.10: zfs genesis patch (require for zfs)
120473-12 SunOS 5.10: lib nss ldap PAM zfs patch (require for zfs)
119090-24 SunOS 5.10: iSCSI device driver and utilities
Also I have modified /etc/system adding those lines:
set ssd:ssd_max_throttle=20
forceload: drv/ssd
bash-3.00# modinfo |grep qlc
66 7ba7e000 ce1f8 282 1 qlc (SunFC Qlogic FCA v20070717-2.22)
bash-3.00# luxadm -e port
/devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
bash-3.00# luxadm qlgc
Found Path to 2 FC100/P, ISP2200, ISP23xx Devices
Opening Device: /devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:devctl
Detected FCode Version: QLA2460 Host Adapter FCode(SPARC): 1.26 05/17/07
Opening Device: /devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:devctl
Detected FCode Version: QLA2460 Host Adapter FCode(SPARC): 1.26 05/17/07
Complete
bash-3.00# luxadm -e port
/devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
bash-3.00# luxadm -e dump_map /devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:
devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 610f13 0 5006048c52a5b746 5006048c52a5b746 0x0 (Disk device)
1 617613 0 2100001b320122b7 2000001b320122b7 0x1f (Unknown Type,Host Bus Adapter)
bash-3.00# luxadm -e dump_map /devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:
devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 620f13 0 5006048c52a5b749 5006048c52a5b749 0x0 (Disk device)
1 627613 0 2100001b32014eb8 2000001b32014eb8 0x1f (Unknown Type,Host Bus Adapter)

Check the configuration on the EMC side. This error message is the heart of the problem:
"Unsupported LUN Addressing method 40 in response to REPORT_LUN"
A quick Googling leads me to believe this means you're trying to assign a LUN ID higher than 255 to the host.
Best of luck!

Restore to a different node with RMAN and EMC Networker

Please, really need help :)
I took hotbackup using RMAN catalog which went to tape. Here is the script for that:
connect target sys/****@PROD;*
connect rcvcat rman/***@catalog;*
*run {*
allocate channel t1 type 'SBT_TAPE';
send 'NSR_ENV=(NSR_SERVER="**",NSR_DATA_VOLUME_POOL=Oracle)';*
*backup database plus archivelog;*
*release channel t1;*
My settings include control file autobackup as follows:
*RMAN> show all;*
*RMAN configuration parameters are:*
*CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 10 DAYS;*
*CONFIGURE BACKUP OPTIMIZATION OFF; # default*
*CONFIGURE DEFAULT DEVICE TYPE TO DISK;*
*CONFIGURE CONTROLFILE AUTOBACKUP ON;*
*CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '/NMO_%F/';*
*CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default*
*CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default*
*CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default*
*CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default*
*CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/data/backups/PROD/ora_df%t_s%s_s%p';*
*CONFIGURE MAXSETSIZE TO UNLIMITED; # default*
*CONFIGURE ENCRYPTION FOR DATABASE OFF; # default*
*CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default*
*CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default*
*CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/data/backups/PROD/hotbkp/snapcf_PROD.f';*
I am trying to restore this backup that is on tape (EMC Networker) to a different node. I can do this outside of Networker without any problems. However, when I try to get the backup from tape I have this issue:
1. initPROD.ora is created and modified accordingly on a new server
2. Export sid, startup nomount on new server
export ORACLE_SID=PROD (on this new server)
*rman target /*
*startup nomount*
3. I then run the following and get this error:
*RMAN> run {*
*2> allocate channel t1 type 'SBT_TAPE'*
*3> send 'NSR_ENV=(NSR_SERVER="***",NSR_CLIENT="********")';*
*4> restore controlfile from autobackup;*
*5> sql 'alter database mount';*
*6> sql 'alter database rename file "/data/dbf/PROD/redo01.log" to "/data/scratch/dbf/PROD/redo01.log"';*
*7> sql 'alter database rename file "/data/dbf/PROD/redo02.log to "/data/scratch/dbf/PROD/redo02.log"';*
*8> sql 'alter database rename file "/data/dbf/PROD/redo03.log to "/data/scratch/dbf/PROD/redo03.log"';*
*9> set until sequence 22; (I get this from archive logs)*
*10> set newname for datafile 1 to '/data/scratch/dbf/PROD/system01.dbf';*
*11> set newname for datafile 2 to '/data/scratch/dbf/PROD/undotbs01.dbf';*
*12> set newname for datafile 3 to '/data/scratch/dbf/PROD/sysaux01.dbf';*
*13> set newname for datafile 4 to '/data/scratch/dbf/PROD/users01.dbf';*
*14> restore database;*
*15> switch datafile all;*
*16> recover database;*
*17> alter database open resetlogs;*
*18> }*
*allocated channel: t1*
*channel t1: sid=149 devtype=SBT_TAPE*
*channel t1: NMO v4.5.0.0*
*Starting restore at 27-FEB-09*
*released channel: t1*
*RMAN-00571: ===========================================================*
*RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============*
*RMAN-00571: ===========================================================*
*RMAN-03002: failure of restore command at 02/27/2009 22:10:43*
*RMAN-06495: must explicitly specify DBID with SET DBID command*
I cannot seem to pass this error. This error indicates that the db has to be either mounted or DBID set before the restore of teh controlfile. Mounting db before the restore of the controlfile does not work. Setting db id 1) does not make sense because if the primary db is down then I cannot get it, right? My primary is up now, so I was able to get db id, but setting it made the restore hang with the following:
*RMAN> run {*
*connect target*
*set dbid=466048808*
*2> allocate channel t1 type 'SBT_TAPE'*
*3> send 'NSR_ENV=(NSR_SERVER="***",NSR_CLIENT="********")';*
*4> restore controlfile from autobackup;*
*5> sql 'alter database mount';*
*6> sql 'alter database rename file "/data/dbf/PROD/redo01.log" to "/data/scratch/dbf/PROD/redo01.log"';*
*7> sql 'alter database rename file "/data/dbf/PROD/redo02.log to "/data/scratch/dbf/PROD/redo02.log"';*
*8> sql 'alter database rename file "/data/dbf/PROD/redo03.log to "/data/scratch/dbf/PROD/redo03.log"';*
*9> set until sequence 22; (I get this from archive logs)*
*10> set newname for datafile 1 to '/data/scratch/dbf/PROD/system01.dbf';*
*11> set newname for datafile 2 to '/data/scratch/dbf/PROD/undotbs01.dbf';*
*12> set newname for datafile 3 to '/data/scratch/dbf/PROD/sysaux01.dbf';*
*13> set newname for datafile 4 to '/data/scratch/dbf/PROD/users01.dbf';*
*14> restore database;*
*15> switch datafile all;*
*16> recover database;*
*17> alter database open resetlogs;*
*18> }*
*connected to target database: PROD (not mounted)*
*executing command: SET DBID*
*using target database control file instead of recovery catalog*
*allocated channel: t1*
*channel t1: sid=152 devtype=SBT_TAPE*
*channel t1: NMO v4.5.0.0*
*Starting restore at 27-FEB-09*
*channel t1: looking for autobackup on day: 20090227*
*channel t1: looking for autobackup on day: 20090226*
*channel t1: looking for autobackup on day: 20090225*
It looks like it cannot find the autbackup of controlfile? But when I list backup while connected to the target db and rman catalog, I see that autobackup is included in every hot backup that we do:
*BS Key Type LV Size Device Type Elapsed Time Completion Time*
*4639 Full 7.00M SBT_TAPE 00:00:04 27-FEB-09*
*BP Key: 4641 Status: AVAILABLE Compressed: NO Tag: TAG20090227T150141*
*Handle: /NMO_c-466048808-20090227-01/ Media:*
*Control File Included: Ckp SCN: 23352682865 Ckp time: 27-FEB-09*
*SPFILE Included: Modification time: 26-FEB-09*
I am stuck What I am doing wrong? Thank you!
Edited by: rysalka on Feb 28, 2009 8:35 AM

Do a list command to see if the controlfile backup is on tape.
RMAN> list backup of controlfile;
I suggest you to read the manual of EMC Networker or call EMC on how to restore the database to another node. I am using Veritas Netbackup, it may be similar to EMC Networke for your reference. There are a few things that need to be followed when you restore database to another node:
1) set DB_ID, which you have done
2) set NB_CLIENT (in your case NSR_CLIENT) to the primary node from where backup was taken
3) configure the backup server to allow redirect restore between the two nodes.
Hope this helps.

EMC - Certificate status could not be determined because revocation check failed.

I've exhausted my resources on this issue and am reaching out for some assistance. I have setup Server 2008 R2 Enterprise SP1, running Exchange 2010 SP1. In EMC I have successfully imported a GoDaddy SSL certificate. Although I am receiving the message -
"The certificate status could not be determined because the revocation check failed."
Here are the steps I've taken to troubleshoot this so far:
[PS] C:\Users\Administrator\Desktop>netsh winhttp show proxy
Current WinHTTP proxy settings:
Direct access (no proxy server).
As you can see, direct access. Which is true, no proxy's on this network.
For good measure, I'll dump the urlcache.
certutil -urlcache ocsp delete
certutil -urlcache crl delete
Both return 0, reboot server.
Comes back up, same message in EMC.
From PS, I test exactly what its getting from GoDaddy.
[PS] C:\Users\Administrator\Desktop>certutil -f -urlfetch -verify mail.fluxlabs.net.crt
Issuer:
SERIALNUMBER=07969287
CN=Go Daddy Secure Certification Authority
OU=http://certificates.godaddy.com/repository
O=GoDaddy.com, Inc.
L=Scottsdale
S=Arizona
C=US
Subject:
CN=mail.fluxlabs.net
OU=Domain Control Validated
O=mail.fluxlabs.net
Cert Serial Number: 27b60918638e0d
dwFlags = CA_VERIFY_FLAGS_ALLOW_UNTRUSTED_ROOT (0x1)
dwFlags = CA_VERIFY_FLAGS_IGNORE_OFFLINE (0x2)
dwFlags = CA_VERIFY_FLAGS_FULL_CHAIN_REVOCATION (0x8)
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN (0x20000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
ChainContext.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
SimpleChain.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=1000040
Issuer: SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy.com, Inc.", L=S
cottsdale, S=Arizona, C=US
NotBefore: 8/20/2011 7:49 PM
NotAfter: 8/20/2012 7:16 PM
Subject: CN=mail.fluxlabs.net, OU=Domain Control Validated, O=mail.fluxlabs.net
Serial: 27b60918638e0d
SubjectAltName: DNS Name=mail.fluxlabs.net, DNS Name=www.mail.fluxlabs.net
33 49 57 5d 6e d8 6b aa b9 61 73 95 44 07 c9 2e 55 6e 47 10
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
Element.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
Element.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 4
[0.0] http://certificates.godaddy.com/repository/gd_intermediate.crt
---------------- Certificate CDP ----------------
Expired "Base CRL (05)" Time: 4
[0.0] http://crl.godaddy.com/gds1-55.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
Expired "OCSP" Time: 4
[0.0] http://ocsp.godaddy.com/
CRL (null):
Issuer: CN=Go Daddy Validation Authority, OU=http://certs.godaddy.com/repository/, O="GoDaddy.com, Inc.", L=Scottsdale, S=Arizona, C=US
e5 53 19 6c 54 87 8c 62 23 1b b9 11 e1 d8 3d 3f b2 04 77 3f
Issuance[0] = 2.16.840.1.114413.1.7.23.1
Application[0] = 1.3.6.1.5.5.7.3.1 Server Authentication
Application[1] = 1.3.6.1.5.5.7.3.2 Client Authentication
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
NotBefore: 11/15/2006 8:54 PM
NotAfter: 11/15/2026 8:54 PM
Subject: SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy.com, Inc.", L=
Scottsdale, S=Arizona, C=US
Serial: 0301
7c 46 56 c3 06 1f 7f 4c 0d 67 b3 19 a8 55 f6 0e bc 11 fc 44
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
Verified "Base CRL" Time: 4
[0.0] http://certificates.godaddy.com/repository/gdroot.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
Expired "OCSP" Time: 4
[0.0] http://ocsp.godaddy.com
CRL (null):
Issuer: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
da 1e d5 63 5c 05 58 50 4e db d2 4e e8 9d 28 9d c4 36 b3 1e
Application[0] = 1.3.6.1.5.5.7.3.1 Server Authentication
Application[1] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[2] = 1.3.6.1.5.5.7.3.4 Secure Email
Application[3] = 1.3.6.1.5.5.7.3.3 Code Signing
CertContext[0][2]: dwInfoStatus=109 dwErrorStatus=0
Issuer: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
NotBefore: 6/29/2004 12:06 PM
NotAfter: 6/29/2034 12:06 PM
Subject: OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
Serial: 00
27 96 ba e6 3f 18 01 e2 77 26 1b a0 d7 77 70 02 8f 20 ee e4
Element.dwInfoStatus = CERT_TRUST_HAS_EXACT_MATCH_ISSUER (0x1)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
Application[0] = 1.3.6.1.5.5.7.3.1 Server Authentication
Application[1] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[2] = 1.3.6.1.5.5.7.3.4 Secure Email
Application[3] = 1.3.6.1.5.5.7.3.3 Code Signing
Exclude leaf cert:
b1 04 4b 90 a1 d3 48 de 46 bd d7 50 20 e3 44 b8 3f 68 39 f7
Full chain:
68 36 4d 37 2e 96 bd d2 aa 77 3f d0 e8 78 a9 e6 68 bd 7d 71
Verified Issuance Policies:
2.16.840.1.114413.1.7.23.1
Verified Application Policies:
1.3.6.1.5.5.7.3.1 Server Authentication
1.3.6.1.5.5.7.3.2 Client Authentication
Cert is an End Entity certificate
ERROR: Verifying leaf certificate revocation status returned The revocation function was unable to check revocation because the revocation server was
offline. 0x80092013 (-2146885613)
CertUtil: The revocation function was unable to check revocation because the revocation server was offline.
CertUtil: -verify command completed successfully.
As you can see, the "revocation server is offline."
So I run the same test from another server on the LAN.
Verified Issuance Policies:
2.16.840.1.114413.1.7.23.1
Verified Application Policies:
1.3.6.1.5.5.7.3.1 Server Authentication
1.3.6.1.5.5.7.3.2 Client Authentication
Cert is an End Entity certificate
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.
It passes. The server's firewall has been disabled. DNS cache has been cleared. I have verified everything I can, and still failing to verify.

[PS] C:\Users\Administrator\Desktop>Get-ExchangeCertificate |fl
AccessRules : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAccessRule, System.Security.Acces
trol.CryptoKeyAccessRule}
CertificateDomains : {mail.fluxlabs.net, www.mail.fluxlabs.net}
HasPrivateKey : True
IsSelfSigned : False
Issuer : SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy
, Inc.", L=Scottsdale, S=Arizona, C=US
NotAfter : 8/20/2012 7:16:57 PM
NotBefore : 8/20/2011 7:49:30 PM
PublicKeySize : 2048
RootCAType : ThirdParty
SerialNumber : 27B60918638E0D
Services : IMAP, POP, IIS, SMTP
Status : RevocationCheckFailure
Subject : CN=mail.fluxlabs.net, OU=Domain Control Validated, O=mail.fluxlabs.net
Thumbprint : 3349575D6ED86BAAB96173954407C92E556E4710
[PS] C:\Users\Administrator\Desktop>Enable-ExchangeCertificate -Thumbprint 3349575D6ED86BAAB96173954407C92E556E4710 -Services POP,IMAP,SMTP,IIS
The command has already been executed. Yes, I have seen those sites. Neither have worked. Like I said, it is directly connected; and no proxies are set.
-- Jeremy MCSpadden Flux Labs

Creation of EMCS Document

Dear all,
i have not found a clear instruction how to create a customs document for EMCS. I know that there is a function call "/SAPSLL/API_6800_EMC_CREATE". But i don't know how and where it is triggered in ECC?
Must i call this function call on my own? Eg. within BadI for creation of invoice or within BadI for post goods issue of outbound delivery?
Or is there a standard programm or include which calls the function call in GTS?
Thanks!
Regards Tobias

Hi,
please consider note 1478717. It also talks about the integration with the feeder system. You have to call the integration processes via direct calls of the interface. It is described in the last part of the note.
In the attachment of the note you will also find a PDF: AppHelp_ExciseDutyMonditoring_EN.pdf
Hope that will help.
Best regards, Christin

SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

Hyper-V Host Server 2012 R2 x64 drive c:
All VMs, including SBS 2011 Standard x64 are on drive d:
I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:. My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64. I had to redefine the Hyper-V machines on
the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
Now the SBS Exchange 2010 is not receiving mail. In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data". The Server
Config is no longer on the EMC. The Recipient Config looks fine.
Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared. There were just a few older messages that came in since the last time I opened Outlook. My public DNS on GoDaddy was not changed. I did not change sending mail
through my ISP Sonic.net. The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
I tried restoring to an earlier Image Copy, but that made no difference. I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
- Michael Faklis

Hi Michael,
à
After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
Based on your description, it seems that you have find the cause of this issue. On current situation, I still
suggest that you should run
SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
Meanwhile, please refer to following articles and check if can help you.
Apply
missing Exchange 2010 RBAC Management Roles and Policies
RBAC Manager
(Exchange 2010 SP2)
Hope this helps.
Best regards,
Justin Gu

Cannot open EMC or EMS

I am stuck. I cannot open the EMC or EMS on either the Exchange 2010 server (all roles are on a single server) or on another server that I have the management tools installed on, both of which are Server 2012 R2. I keep getting Access Denied,
though at times it was Internal Server error (see below).
What I have tried already:
EMTshooter - could not determine the problem "Could not connect to any Exchange server in the current site. problem found: looking for error... unknown error"
Verified that kerbauth is registered on the PowerShell virtual directory and only the PowerShell virtual directory (Native/Local)
Ensured that SSL is not required on the root (Default Web Site), that it is required on the various virtual directories, except PowerShell, which it is NOT required on
Ensured that there is no redirection going on with any virtual directory or the root site
Verified the account is a member of the Organization Management Exchange Security Group and that that group is in the correct AD OU
Tried adding another Domain Admin account to the Org Mgmt group, and connecting as that user but same results
Tried resetting the Administrator profile and clearing all the cache files
Ensured the permissions on the physical directory grant my user (administrator, the account used to install exchange in the first place) access to it
Ensured it is pointing to the correct directory (C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\PowerShell"
Gone through the web.config file at that location and replaced instances of %ExchangeInstallDir% with the actual path (C:\Program Files\Microsoft\Exchange Server\V14\)
Verified there is no web.config found at C:\inetpub\wwwroot
Verified in ApplicationHost.config the entry for WSMan (image="C:\Windows\system32\wsmsvc.dll")
Verified in ApplicationHost.config the entry for kerbauth (image="C:\Program Files\Microsoft\Exchange Server\V14\Bin\kerbauth.dll")
Verified no duplicate SPNs exist on the machine
Verified the account has remotepowershellenabled:$true
Ran WinRM quickconfig which returned the expected results
Went through the steps provided by David Strome in his EMC Permissions Part Deux posting up to step 6, where I ended up getting Access Denied as well
Checked with ADSIEdit and it appears the management rolls are as they should be
Get-ManagementRollAssignment also appears to return expected values (when run from a PowerShell session that has had the microsoft.exchange.managment.powershell.e2010 snap-in added); however, cannot run Get-ExCommand in that same PowerShell session
Ensured that Outlook is not and has not previously been installed on this machine (* as best I could... do not have entire history of the machine available)
The configuration of the machine is as so:
Exchange 2010 SP3 with Update Rollup 6 on Windows Server 2012 R2 fully patched and updated. It is utilizing a certificate issued by the Enterprise Root CA which is also on the same server. This certificate has the subject name of owa.domain.com
with an SAN of autodiscover.domain.com. The internal domain is the same thing, but .local, however, the virtual directories have been configured with both internal and external URLs that are identical and use the external name. DNS has been configured
the resolve the external names to the internal IP address for internal clients. It is the server replacing a 2003 Exchange server (different machine, obviously) which is still online.
The issue reared its ugly head because there was one user still on the 2003 machine that needed to be moved to the 2010 machine and when trying to open the console to create a move request, that's when it was found we could not get into the console.
During the above troubleshooting, there was a time when it was instead returning "cannot determine the content type of the HTTP response" and when I analyzed a Network Monitor capture of the conversation it was actually receiving a 500 - Internal
Server error response instead, but this was only for a short while and it has returned to the Access Denied messages.
I get the message whether or not I access via the Exchange Shell or Console. However, I can open PowerShell, add the exchange snap-in and run commands against the server. I cannot, however, create a new-pssession.
Enabling failure tracing on IIS for the PowerShell directory, the trace indicates the problem is that a parameter is incorrect:
Message
Failed to establish a secure encrypted connection.
Context
DoAuthentication
ErrorCode
The parameter is incorrect. (0x80070057)
However, what that parameter is, I have no clue since the request headers looked like this:
Connection: Keep-Alive Content-Length: 0 Content-Type: application/soap+xml;charset=UTF-8 Authorization: Kerberos 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
Host: tps03.domain.local User-Agent: Microsoft WinRM Client
I would have liked to uninstall and reinstall Windows Management Framework and/or Windows Remote Management, but being Server 2012 R2, that is not an option.
Interestingly enough, users currently have no problems accessing their mailboxes, via Outlook or OWA - it's just we cannot manage the server. Any help on what to try next is greatly appreciated...
-Michael.

Two things I can think of to check. In IIS, under Default Web Site, PowerShell virtual directory, ensure that in SSL, Require SSL is not selected. In the HTTP Redirect virtual directory, ensure that there is no HTTP redirection selected.
These can be set wrong when you incorrectly configure HTTP Redirect.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
Note where I said above:
Ensured that SSL is not required on the root (Default Web Site), that it is required on the various virtual directories, except PowerShell, which it is NOT required on
Ensured that there is no redirection going on with any virtual directory or the root site

Can not install emcli on Debian

Hi,
I try to install emcli on debian, but without success. I log in as me (dap) but setup show errors... Any ideas why it do not work?
Thanks for any help
dap
11:27:31 dap@sezam ~/emcli $ ./emcli setup -url=http://xxx:4889/em/ -username=system
Oracle Enterprise Manager 10g Release 10.2.0.0.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Enter password: Error: Cannot acquire password. "setup" must be run as the logged in user. "su" or "msu" are not allowed.
11:29:51 dap@sezam ~ $ uname -a
Linux sezam 2.6.18-4-686 #1 SMP Wed Feb 21 16:06:54 UTC 2007 i686 GNU/Linux
11:29:52 dap@sezam ~ $ java -version
java version "1.5.0_10"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_10-b03)
Java HotSpot(TM) Client VM (build 1.5.0_10-b03, mixed mode, sharing)
Message was edited by:
dap

Enter password: Error: Cannot acquire password. "setup" must be run as the logged in user. "su" or "msu" are not allowed.Did you check the above message? Is (dap) the software owner? Try using the software owner(installer).

EMC Recoverypoint

Similar Messages

Maybe you are looking for