EMC Symmetrix Installation and Administration on Solaris

Hi,
Could anyone tell me where i can get good documents on Installation and administration of EMC Symmetrix devices with a volume manager on a Solaris box.
Thanks.

On another note... is there a Sparc equivalent for the mod_wl_ohs.conf where we would place
<Location /<deployed app>>
SetHandler weblogic-handler
WebLogicHost <weblogichost>
WebLogicPort 7001
</Location>
It appears that this goes into the apache httpd.conf file, correct? Or does the mod_wl_ohs.conf equivalent exist?
We have just about completed everything in regard to being able to include a solaris host in our list of hosts that are tied to OAM. The webgate was created and software installed, the deployed app protected, etc... Everything that we have done for Linux and XP in the past we have done for this Sparc host.
When we try to access the Sparc's protected uri... nothing happens. The browser stays blank... the url does not change to display the oamsso login.html (as the other installs do)... nothing is returned... no error, no remarks, no logfile entries... just a blank browser.

Similar Messages

Exadata Database installation and administration documents please

I want to learn more about Exadata. Please anybody share the exadata database installation steps and administration documents.
Appreciate your reply.
Thanks in advance

Hi
you can find all the documentation for Exadata on the OTN site : http://www.oracle.com/technetwork/database/exadata/index.html
However sorry to disappoint you as of now Oracle does not allow any installation or configuration to be done by yourself on the Exadata box hence there is no document with regard to installing and configuring the Exadata. But creating or adding new instances you can do with the DBCA wizard.
Regards

SCM Installation and Administration.

Hi All,
My next project is to install SCM 7.0 and LiveCache and to administrate the same. I have already worked in ECC 6.0 and SRM 5.0. As a SAP Basis administrator, I need to know what are the activities i should know in regards to SCM & LiveCache administration.
Can somebody help me in thig regards and list down the activities which SAP Basis person should be knowing in SCM Environment.
Thanks

Hi ,
Thanks for reply
I am confused in SCM & Live cacache post installation activity. Please help me to clear out following doubts
1) As per SCM Inst. guide 7.0 SR1, post installation activity "5.13BI-Specific Post-Installation Steps", We need to do client copy and BI specific.
2) In the Same guide there is a activity "5.17Performing the Client Copy".
3) In Live 7.7 cache inst. guide, post installation activity "5.1.1Setting Up the Connection to the liveCache Instance".
I have gone through these two guides. Please clear out following doubts.
1) As per SCM Inst. guide , Do we need separate client for BI-Specific activity and one more client for other acivity. OR we should have only one client for BI-Specific and SCM Specific activyt. So DO we required two separate clients ?. OR there always only one Production client in SCM system ?
2) As per LiveCache inst. Guide, in the post installation activity we need to set up a connection. Is this connection to above mentioed BI-Specific client or other production client.?
I am little confused. Please reply.
Thanks

Installation and Administrative rights

If PPro CS5.5 is installed on a PC (actually Production Premium CS 5.5) and then administrative rights are taken away - how will this affect functionallity of the software? Our IT department is "standardizing" our laptops and they want to take away admin rights.

I guess that's about the most simple but yet most descriptive of an answer. I'm going to assume this applies to CS4 also. I can't wait to see their "answer" for this. This is the same bunch of knuckle heads that thought instead of getting a decent RAID on the editing PC, I could use network storage and a 10/100 connection.
Thanks for the info. I should have figured but then I never even considered of trying this in first place.

Oracle 10G installation problem, and errors on SOLARIS 10 x86

HI.
I installed the last version of oracle 10g on a x86 SOLARIS 10 system.
When the installer arrived at Configuration assistants, the window is stopping, and I can't see forward. But when I look at the installAction.log, the installation is checked as OK (?).
When I launch sqlplus, and startup inside, it is said the ora-00205 error (problem with control files), and in the end, I'm really suprised there's no the database I told the installer to create at the beginning. But should I be surprised? As I didn't see really the end of the installation, and the installer didn't propose me the PATH where to install the DB, well, I guess there's something wrong.
Could anybody tell me how to solve these problems, please?
Thank you :)

Two options:
1. Create database using DBCA - execute $ORACLE_HOME/bin/dbca
2. Create database manually (without DBCA)

I cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

i cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

I read a way on another forum to fix this problem. Right click on the setup.exe and select "Run as administrator" this should solve your problem.

Installer of Desktop and Administrator 11g for x64

Anybody knows if there are any plans to release an x64 installer for Discoverer Desktop and Discoverer Administrator(11g).
Edited by: user5629916 on 30-jun-2010 9:40

Hi
I have done some more investigation on your behalf and would like to point you to Oracle Support note *233047.1*. Here's the link to the website: https://support.oracle.com/CSP/ui/flash.html
In there are several useful questions and answers about Discoverer. The one that will be of interest in your situation is this one:
Q: Are Discoverer 11g Administrator and Desktop certified to install on 64-bit Windows clients?
A: No, at the time of this posting, the certification spreadsheet specifically only lists 32-bit Windows clients (XP, Vista, 7). At this time certification with Windows 64-bit client operating systems is being evaluated for a future patch set, post patchset 3. This document will be updated when the certification is announced.
If you try to install on Windows 64-bit operating systems, you will receive a warning like this when you run setup.exe from the /Disk1 directory.
You may workaround this by installing from ..\Disk1\install\win32 and running setup.exe from there; however, as stated at this point it is specifically not certified on 64bit Windows client operating systems; therefore, we cannot accept Service Requests for functional issues.
By the way, I did have one of my clients only yesterday successfully install Desktop and Administrator 11g onto Windows 7 64 bit. Here is one of their comments: I am running on Windows 7 64 bit. The 11.1.1.3.0 has both 32 bit and 64 bit available. It seems if you are running on 32 bit you would choose XP mode and the 64 bit by default compatible with Vista
Best wishes
Michael

Trying to download itunes and keep getting message 'the system administrator has set policies to prevent this installation' and therefore cant download - any ideas

trying to download itunes and keep getting message 'the system administrator has set policies to prevent this installation' and therefore cant download - any ideas

Let's try something relatively simple. Download and save a copy of the installer to your hard drive (don't run the install on line and don't start the install just yet):
http://www.apple.com/itunes/download/
Now right-click on the iTunesSetup.exe (or iTunes64Setup.exe) that you downloaded and select "Run as administrator".
Does that go through any better for you?

Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error

Hello,
I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
lf
WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
INFO: Framework waiting for Action to complete at 15:08:10.272
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
4.b_doDiscovery=false
5.AGENT_BASE_DIR=/users/ncgf/em_agent
6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
7.s_hostname=nsn175-89.us.oracle.com
8.OMS_HOST=nsn175-105.us.oracle.com
9.b_startAgent=false
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4904
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/users/ncgf/em_agent/agent_inst
2. agentBaseDir=/users/ncgf/em_agent
3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
1. Agent Registration Password was not passed.
2. b_secureAgent was passed as false
3. The flag -forceConfigure was assed from agentDeploy.sh
INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
INFO: oracle.sysman.top.agent:Plugin Homes found.
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
INFO: oracle.sysman.top.agent:Plugin command completed with status=0
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 15:08:10.272
Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
"Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output. Also if you can open an SR with oracle support to track this issue and its resolution. "
[ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
[ncgf@nsn175-105 bin]$ ./emcli verify_updates
Verifying updates. Starting validation...
Type       : Plug-in
Description: Demo Hostsample Test Plugin
Attributes
        Version: 1201000100
        Revision: 0
        OS Platform: Generic Platform
        Plug-in Name: Demo Host Sample Plugin
Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.

   Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this).

Why does it have to be this difficult? JES installation and a reboot

Hi,
I downloaded JES for Windows, and I went through the default installation and configuration process. Everything works fine. I can use the Access Manager screens to create users and I got one of the example programs working that allows me to test remote authentication via LDAP.
Horray!
However, when I shut my machine down and restart, I'm not able to remotely login as before. I'm starting the Webserver and Application Server using the start-menu buttons that were provided, but the sample remote login program won't work. I can't even get access to the web screens for the Access Manager, although I know that the app server is running on ports 8080 and 4849. I also managed to create a script to start the dsadm.exe process, but still no avail.
What else am I missing?
Thanks,
Bruce

Did you start cacaoadm ?? This is known to come into play for Remote administration/actions.
The sequence I'd follow would be:
1. Cacaoadm restart
2. DS restart
3. AppServer-domain1 restart.
Also if you are having any issues with the Console access after recycle you can look into the debug logs (path for debug logs is specified in the AMConfig.properties file) for traces on errors. If you dont see any relevant information there, you may want to turn on debugging in the AMConfig.properties, recycle Access Manager and try.
Attribute that enables (flood gates) debugging:
# error is default, whereas message is for debugging
#com.iplanet.services.debug.level=error
com.iplanet.services.debug.level=message
HTH
Dexthor.

Exch 2013 Installation and configuration from a SBS point of view?

I was just wondering if anyone has stumbled upon any good "how-to" sites for those of us that (up to now) have been used to using SBS servers but now find ourselves needing to go the manual route with separate new servers (domain controller and
Exchange 2013 server)?
I'm trudging along with my first Server 2012 R2 and Exchange 2013 SP1 installation and configuration, but since I'm used to things configuring themselves in SBS, the piecemeal approach to 2013 is presenting challenges for me.
Considering the market for SBS is small business (and for me, typical 20 users), I'm looking for some direction and help in configuring these new servers to act like SBS 2011 replacement servers, with similar capabilites, etc...from the viewpoint of an SBS
administrator, per se.
Maybe nothing exists and we have to start from scratch, but I was hoping with as big as the SBS market was, there would be some useful info out there with the realization that we're coming from SBS.
Thanks.

Hello,
It seems you have installed the Exchange Server and preparing to move mailboxes to the new host. You can check the application log to check whether the new installed Exchange works
fine.
If there are any error ID/reports, you can post them here for our referernce.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

OEM 10.2.0.1 installation and upgrade to 10.2.0.3

Dear all,
I want to install the latest version of OEM 10.2.0.3 on Linux RedHat 4. However, after downloading the OEM 10.2.0.3 and reading the release note, I realized that the download is just the 10.2.0.3 upgrade patchset. I have to do a fresh base installation of OEM 10.2.0.1 first. Is this correct?
After installing OEM 10.2.0.1 with an existing 10.2.0.1 database, I need to upgrade OEM 10.2.0.1 to OEM 10.2.0.3 using the patchset I downloaded. Because both OMS and AGENT will be upgraded, I am not sure what installation destination I shoud supply? OMS_HOME, or AGENT_HOME, or just a new home for upgrade? What are the required steps to upgrade OEM 10.2.0.1 to OEM 10.2.0.3?
Are there any documentation or articles that I can follow to do the upgrade?
Thanks a lot in advanced.
Xiaoping

There is a README.txt file in the 10.2.0.3 patchset zip file that has the instructions for upgrading 10.2.0.1 OEM to 10.2.0.3.
You download 10.2.0.1 separately which delivers a 10.1.0.4 database. Apply the one-off database patch to the db10g 10.1.0.4 Oracle Home via opatch, then use runInstaller to upgrade to 10.2.0.3 via 3731593. You can optionally create a db10gr2 10.2.0.1 Oracle Home, apply the 10.2.0.3 patchset then run dbua to upgrade the 10.1.0.4 repository database to 10.2.0.3.
You probably would have had fast response posting to the Enterprise Manager Grid Control forum:
Enterprise Manager
2. Fresh Installation of Enterprise Manger 10g Grid Control Release 2 and upgrading it to Release 3
In order to install Enterprise Manager 10g Grid Control Release 3, you must install either 10.2.0.1.0 or 10.2.0.2.0 Grid Control environment. This section describes steps to install Enterprise Manager 10g Grid Control Release 3 environment starting with 10.2.0.1.0 (10.2.0.2.0 for Windows) install
2.1 Install Oracle Enterprise Manager 10g Release 2
Installing 10g Grid Control Release 3 requires any previous releases of Grid Control, that is any 10.2.x.x.x installation, and upgrade to 10.2.0.3.0 release. If you do not have a previous release, but want to have a 10.2.0.3.0 Grid Control environment, then first install 10.2.0.1.0 Grid Control (10.2.0.2.0 for Windows), and then upgrade it to 10.2.0.3.0. Start with the Oracle Enterprise Manager 10g Release 2 Grid Control media pack (DVD) and install 10.2.0.1.0 (10.2.0.2.0 for Windows)
- Insert DVD into your computer (note: It is better to copy the DVD contents to local hard disk for faster performance)
- Run runInstaller (setup.exe for Windows) to start installation
- When asked for "install type" option, choose "Enterprise Manager using New Database" option
- Complete installation as per install guide
Important: For information about installing 10.2.0.1.0 and 10.2.0.2.0, refer to the installation guides available at:
http://www.oracle.com/technology/documentation/oem.html
2.2 Apply required patches
In the case of Grid Control environment installed via "Enterprise Manager using New Database" option, repository database version is 10.1.0.4.0. Before upgrading to 10.2.0.3, apply the patch for bug 4329444 on the Database Home. In order to apply this patch for the Solaris platform:
- Copy the p4329444_10104_<platform>.zip file from the DVD to any directory on the host which has the repository database running on.
- Unzip the file using following command:
$ unzip p4329444_10104_<platform>.zip
- Follow the instruction in 4329444/README.txt to apply the patch
For more detail on this, refer to the release note.
2.3 Install Oracle Enterprise Manager 10g Release 3
2.3.1 Copy the p3731593_102030_<platform name>.zip patch set installation archive from the DVD to any directory on the host which has the Oracle Management Service running on it.
2.3.2 Perform the installation
- Enter the following command to unzip and extract the installation files from the downloaded image described in section 1.2:
$ unzip p3731593_102030_<platform name>.zip
This extracts the files to the "3731593" directory.
- Navigate to the 3731593/Disk1 subdirectory
$ cd 3731593/Disk1
- Set the ORACLE_HOME variable to the Oracle Management Service(OMS) oracle home.
- Execute the runInstaller (setup.exe for Windows)
$ ./runInstaller
The upgrades process then upgrades the Oracle Management Service (OMS), Oracle Management Repository and the Management Agent on the same host as the OMS to the latest Enterprise Manager 10g release 3 version.
Important: The same Patch Set can be used for patching OMS,Repository, and Management Agent. For more detail on installing the patchset, refer to the release note.
2.4 Optional: Upgrading Repository Database to 10.2.0.3
If you installed Grid Control 10.2.0.1.0 (10.2.0.2.0 for Windows) via "Enterprise Manager using New Database" option, your repository database version is 10.1.0.4. In order to upgrade your repository database to 10.2.0.3, follow the steps below after upgrading your Grid Control environment to Enterprise Manager 10g release 3.
a. Upgrade the database to 10.2.0.1
b. Install 10.2.0.3 database patchset

EAS Startup issue after OEPM 11 Installation and Configuration

Hi All,
EAS server is not starting up after the successfull installation and configuration of OEPM 11.1.1.2
Provider Services and Shared Services started fine and i was able to login to Shared Services console
During eas startup individually from the startup script i see this catalina.out file with some errors..
By this i understand that there is some problem in selecting the required JRE as i see both JRE and JRE-64 under the
common folder. Anybody has come across this issue while startup of EAS 11.1.1.2
Any help would be accepted...
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
Thanks,

Hi,
1. I assume your system is 64 bit.
2. I think you are installing the 64 bit application. In that case you would get both the folders i.e JRE and JRE-64.
3. Seconldy, I would like to set the permissions of the folders to everyone and give full control and test again. ( to do this, right cick ->security ->add 'everyone' -> give him full control and test).
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

LAST REMINDER: WLS Management and Administration Survey

The WebLogic Server team needs your input. We are working to improve the
experience of WebLogic application development and deployment, with an
emphasis on configuration management, monitoring, and problem diagnosis of
both the server and your deployed business logic. To do this, we are looking
to you, our users, for input about the processes and tools your team uses to
deploy and manage reliable J2EE applications on the WebLogic Application
Server.
In order to hear from you, we are asking for your participation in a short,
online survey. This survey is targeted to WebLogic Server operators and
application administrators. It includes questions that ask you to discuss
your development and administration team, your current applications and
projects, the practices and policies you employ to insure application
reliability and manageability, and the tools you use or need in your
production and test environments.
If you are willing to participate, the survey is available online by
visiting:
http://www.surveymonkey.com/s.asp?u=85377130222
Please be sure to complete the section desscribing yourself and your role in
the organization you represent so that we can use your data to improve
WebLogic Server.
Thank you, in advance, for your input,
BEA WebLogic Server Development Team

At first sight it seems your webcenter installation does not match the version of your WLS.
Your WLS installations seems to be 10.33 and not 10.3.2
If you are using WLS 10.3.3 you MUST also install webcenter 11.1.3
That could be the cause of your problems.

REMINDER: WLS Management and Administration Survey

The WebLogic Server team needs your input. We are working to improve the
experience of WebLogic application development and deployment, with an
emphasis on configuration management, monitoring, and problem diagnosis of
both the server and your deployed business logic. To do this, we are looking
to you, our users, for input about the processes and tools your team uses to
deploy and manage reliable J2EE applications on the WebLogic Application
Server.
In order to hear from you, we are asking for your participation in a short,
online survey. This survey is targeted to WebLogic Server operators and
application administrators. It includes questions that ask you to discuss
your development and administration team, your current applications and
projects, the practices and policies you employ to insure application
reliability and manageability, and the tools you use or need in your
production and test environments.
If you are willing to participate, the survey is available online by
visiting:
http://www.surveymonkey.com/s.asp?u=85377130222
Please be sure to complete the section desscribing yourself and your role in
the organization you represent so that we can use your data to improve
WebLogic Server.
Thank you, in advance, for your input,
BEA WebLogic Server Development Team

At first sight it seems your webcenter installation does not match the version of your WLS.
Your WLS installations seems to be 10.33 and not 10.3.2
If you are using WLS 10.3.3 you MUST also install webcenter 11.1.3
That could be the cause of your problems.

EMC Symmetrix Installation and Administration on Solaris

Similar Messages

Maybe you are looking for