Emergency !! Major Power Failure - Publisher / Subscriber& Connection wont start...

We have had a major outage, after power restored Publisher services wont start.
In addition Unity connection has a corrupt database and another subscriber is screwed.
However - first things first - I desperately need to get my publisher live.
I have restarted it many times now -
The GUI doesnt work and at the command line when I type
utils services list -
they are all in [STARTING] -
Uptime is now 2 hours.
Any ideas ?? Hopefully someone is working on a saturday !

Thanks for all the feedback -
I contacted TAC and raised a P1. We lost one publisher and one subscriber - we only had one working subscriber
we went down the road of SUB to PUB recovery.
At the end I downloaded the missing COP files and we were good to go.
The only 'gotcha' seems to be dial-plans - there were causing me a little heart ache and needed to be re-installed. Also MoH - but I didnt have much of that to begin with.
Apparently the underling Linux OS doesn't like sudden power downs !

Similar Messages

MacBook Pro Power Failure After USB Connection

I purchased my MacBook Pro not even a few weeks ago. I've used an external hard disk drive with it fine.
Today however, I connected my iPad via USB and instantly the power failed, completely cut off!
Of course I removed the USB connection immediately and attempted to power on the MacBook Pro, but to no avail, I plugged the power cable and the status indicator on the power cable blinks between green and orange in no particular pattern and the battery level indicator on the MacBook Pro does not work (it did previously).
I realise that there is likely no hope with this situation other than to get a replacement, although my partner also has a MacBook Pro (2011) and this happened to his only yesterday, luckily his powered back on fine and seems to be working. Perhaps this is a software issue?
Although I'm doubtful, any help would be greatly appreciated!

I also have a similar problem. Even with a full battery charge, my 11 month old MBP 15" seems to randomly do an instant and complete power-off. Like your partner, mine will seem to work fine for a few days then abruptly just fail. I am still troubleshooting but it seems to happen more frequently when I have something connected to the USB - like my hard drive for backup. Please share any further info / Resolution. I am worried I may lose everything before I can get a complete backup.

Apple TV power failure - now no connection

After powering up the Apple TV (ver 3) again (the cat had jumped on the plug box and powered it down!) it asked for date and time and hung for a while. Then I restarted it through the Apple TV menu and all was well until I realised my Mac Mini would not connect to it. The icon appeared in the menu bar but on trying to connect would just sit there for ages and eventually turn to a black color again with no connection. Have tried a restart again on ATV and Mini still no luck. My iPad will mirror to it though!
These error messages were received after the second round of restarts.
"An error occured (200500) while connecting to Airplay device Apple TV " and also
"An error occured (-6722) while connecting to Airplay device Apple TV "
Any help and or advice on what to do next is much appreciated.

Hello, pfotoguy.
I see that you are having issues with your Apple TV. Below, I have provided a couple articles that will help you troubleshoot this issue.
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Troubleshooting Apple TV not recognized in iTunes
http://support.apple.com/kb/TS1453
Cheers,
Jason H.

Configuring a EVM-HDA-6FXO for power failure

I want to add a EVM-HDA-6FXO to an exsiting EVM-HDA-8FXS/DID so if power goes out I can still have the FXO ports provide dial tone to the FXS ports.
Two emergency lines NPA-NXX-1000 comes in as a FXO and goes out a FXS port.
Can this be done. And does it work if the power is off to the router.

The FXO expansion module supports a power failure port that connects directly to the central office (CO) in case of failure.

Satellite Pro 4220 wont start

dear users,
Ive got a problem with my old toshiba laptop it is an 4220 satellite pro pentium III. I have a problem with the power i guess, the computer wont start. If i press the power on button, with the adapter in the socket power nothing happens. Now the green led for power is on but the orange led is flashing on and of, but the laptop wont start. What must i do, buy a new accu? a new adapter or is internally wrong with the laptop?

Hi
Sorry but there is nothing to do. You must contact service partner. Let them check it. They can read this code and localize the defect.
I dont know in which country you live but please check the ASP list.

Ecently, i intended to download but unfortunately it's already more than 5 attempts. Due to the slow connection and power failure, my download failed to complete. Would it be possible to download the application again? Regards

Recently, i intended to download but unfortunately it's already more
than 5 attempts. Due to the slow connection and power failure, my
download failed to complete.
Would it be possible to download the application again?
Regards

Which application does this concern? Alternative downloads are available thru the following pages...
Download and Installation Help -
https://helpx.adobe.com/download-install.html
You can also download trial versions of software thru the site linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
http://prodesigntools.com/tag/ddl

I had a power failure and for a number of websites why do I now get the message "This Connection is Untrusted."

After rebooting after the power failure when I go to new websites or even within some websites after clicking on a link the message box appears and I have to add a security exception to get past the message and see the link. I am using V4.0. I do not get that message on another computer using V 3.6.15.
What can I do to reset the browser?

John,
That did it! I no longer get that message. The clock was set to the wrong day and time. So far it is keeping time correctly, but per your suggestion I will also check the battery.
Thanks for the prompt and accurate help.
H Weiss

Imac wont start up after power failure

i moved the table my imac was on and i accidentally took off the power cable.the imac was on so when i took the cable off it shut off. then i put the cable back and tried to turn it on but nothing happened..it is like dead. any suggestions?

Also, there is a small battery or capacitor on the logic board that may need to be replaced, as this has been the cause of a similar issue over many generations of Mac computer hardware. Of course there are other causes of failure, and that is why the help of an expert to troubleshoot and diagnose issues to attempt to resolve them can take time.
And it may not be resolved after the first attempt if the actual problem is deeper than first best educated guess arrived by troubleshooting. Part of some repairs requires replacement of suspect parts, even if they may not be the cause, to eliminate their being within the realm of possibility. A good read is among the original Apple Technical Service Manuals, those aren't often available to the general public. I used one to self-troublehoot an iMac under AppleCare after the nearby 200+ miles one-way distant 'specialist' could not fix my new iMac, four times. So I am a bit cool on newer Macs; the way I see it one new headache lasting 10 months and requiring 3,000 miles travel, to not be resolved by experts (and under warranty, so I can't touch it!?!) is enough.
The best cure for main power failure, is to have a good high quality battery backup system in place with automatic voltage regulation, that also works as a power filter; and can step in to isolate the Mac from mains high-or-low power fluctuation. This can save many products from bad power sources; do not rely on these, either. Make copies of your work ahead of time. This saves your computer from issues you can prevent.
PS: my Macs seldom are shut off, for up to 11 months, some of mine only get to sleep when not in use. When the main power goes offline, during a storm or extended utility failure of their own making, I will have to shut them off as a choice. There is software in the UPS unit that can help shut down automatically, and that is a choice, too. I usually find their software problematic on occasion; and the battery backup is not very long in duration, so one with a few hours runtime and a method of rationing the power if you are present when the mains fail, is helpful in performing a normal shutdown after a power failure.
Good luck & happy computing!

After power failure iMac wont start up

I had an unexpected power outage yesterday and since that happened, I cannot get my iMac G5 to start up. I can only get as far as the gray screen. I've tried the command option P R and holding down the power button for 10 seconds and several other things, and I cant get beyond that gray screen. Im currently running Tiger on it and thought maybe I could reinstall the operating system? Ive had other power failures before and have never experienced anything like this that I couldnt start the computer. Any suggestions would be greatly appreciated! Thank you!

Hi Kelly,
Do you have your data backed up? If not, do this as soon as possible.
Have you disconnected your Mac from the wall plug and let it sit about 10 or 15 minutes?
Have you tried starting in safe mode?
Have you tried booting from your install disks and running DIsk Utility "Repair Disk"?
There is always the possibility of a power outage taking out a hard drive. Especially if it is writing at the time, I recently lost one the same way. Mine had bad blocks that could not be formatted out, so I had to replace it.
Hopefully your situation is not as bad. Let us know.

Wont power up without AC connection

Hi,
I have had my macbook since 2008 and it suddenly started with this problem - basically it won't start up without the adaptor connected... at all. It recognizes the AC is connected but is not charging. Must be a prob with the battery? Anything I can try to get it out of this funk?
Thanks!!!

Hi jesstar,
For something like this it comes down to component isolation.
1.) Are you able to run the computer with just A/C power and no battery connected?
2.) If you have access to a secondary power adapter, any change to the overall situation when that is introduced?
3.) Have you reset the SMC?
4.) If you put your battery into another machine, how does that machine perform? Any change?
5.) If you have access to another battery and put that into your machine, any change?
It's quite possible that your issue is battery related. But it's also quite possible that one of the two power flow connections in the machine are causing an issue (MagSafe board, Battery Connector/Sleep-Switch sensor).
The above steps can be performed without visiting a service provider, assuming you have access to a friend, neighbor, co-worker, etc. with a similar model machine. The process of determining if the issue is "under the hood" would require the service provider / retail store.

Restore/Repair Jabberd / iChat server after power failure

SLS 10.6.1 on Mac Mini.
I've had this happen twice, but in different ways. We've had some storms come through and knock the power out recently. Everything seems to come back online fine, except for iChat server (jabberd of course). The first time, I was getting errors about c2s and sm not being able to connect to, well, itself. I was never able to actually fix those, I have to reinstall the whole system.
This time I'm getting similar errors where the system isn't talking to itself properly. Here is the log from clicking "Start iChat" to trying to connect from client.
Nov 8 05:28:20 myserver jabberd/router[1156]: reopening log ...
Nov 8 05:28:20 myserver jabberd/resolver[1154]: reopening log ...
Nov 8 05:28:20 myserver jabberd/sm[1155]: HUP handled. reloading modules...
Nov 8 05:28:20 myserver jabberd/sm[1155]: reopening log ...
Nov 8 05:28:20 myserver jabberd/c2s[1157]: reopening log ...
Nov 8 05:28:20 myserver jabberd/s2s[1159]: reopening log ...
Nov 8 05:28:20 myserver jabberd/router[1156]: log started
Nov 8 05:28:20 myserver jabberd/router[1156]: reloading filter ...
Nov 8 05:28:20 myserver jabberd/router[1156]: couldn't open filter file /etc/jabberd/router-filter.xml: No such file or directory
Nov 8 05:28:20 myserver jabberd/c2s[1157]: log started
Nov 8 05:28:20 myserver jabberd/c2s[1157]: shutting down
Nov 8 05:28:20 myserver jabberd/router[1156]: shutting down
Nov 8 05:28:20 myserver jabberd/router[1156]: [127.0.0.1, port=49413] disconnect
Nov 8 05:28:20 myserver jabberd/router[1156]: [proxy65.myserver.com] offline
Nov 8 05:28:20 myserver jabberd/resolver[1154]: log started
Nov 8 05:28:20 myserver jabberd/resolver[1154]: shutting down
Nov 8 05:28:20 myserver jabberd/sm[1155]: log started
Nov 8 05:28:20 myserver jabberd/sm[1155]: shutting down
Nov 8 05:28:20 myserver jabberd/s2s[1159]: log started
Nov 8 05:28:20 myserver jabberd/s2s[1159]: shutting down
Nov 8 05:28:20 myserver jabberd/s2s[1159]: connection to router closed
Nov 8 05:28:21 myserver jabberd/router[1156]: [127.0.0.1, port=49415] disconnect
Nov 8 05:28:21 myserver jabberd/router[1156]: [conference.myserver.com] offline
Nov 8 05:28:22 myserver jabberd/router[1156]: [127.0.0.1, port=49417] disconnect
Nov 8 05:28:22 myserver jabberd/router[1156]: [pubsub.myserver.com] offline
Nov 8 05:28:22 myserver jabberd/router[1156]: [127.0.0.1, port=49420] disconnect
Nov 8 05:28:22 myserver jabberd/router[1156]: [resolver] offline
Nov 8 05:28:22 myserver jabberd/router[1156]: [127.0.0.1, port=49421] disconnect
Nov 8 05:28:22 myserver jabberd/router[1156]: [s2s] default route offline
Nov 8 05:28:22 myserver jabberd/router[1156]: [s2s] offline
Nov 8 05:28:22 myserver jabberd/router[1156]: [127.0.0.1, port=49408] disconnect
Nov 8 05:28:22 myserver jabberd/router[1156]: [myserver.local] offline
Nov 8 05:28:22 myserver jabberd/router[1156]: [127.0.0.1, port=49407] disconnect
Nov 8 05:28:22 myserver jabberd/router[1156]: [c2s] offline
Nov 8 05:28:25 myserver servermgrd[67]: servermgr_jabber[N]: waiting for jabberd to finish shutdown...
Nov 8 05:28:25 myserver servermgrd[67]: servermgr_jabber[N]: jabberd service shutdown completed.
Nov 8 05:28:25 myserver servermgrd[67]: servermgr_jabber: STARTING UP iChat Server.
Nov 8 05:28:25 myserver servermgrd[67]: servermgr_jabber[N]: waiting for jabberd to finish startup...
Nov 8 05:28:25 myserver jabberd/c2s[9720]: starting up
Nov 8 05:28:25 myserver jabberd/resolver[9717]: starting up
Nov 8 05:28:25 myserver jabberd/s2s[9722]: starting up (interval=60, queue=60, keepalive=0, idle=86400)
Nov 8 05:28:25 myserver jabberd/c2s[9720]: modules search path: /var/jabberd/modules/jabberd2
Nov 8 05:28:25 myserver jabberd/router[9719]: starting up
Nov 8 05:28:25 myserver jabberd/c2s[9720]: initialized auth module 'sqlite'
Nov 8 05:28:25 myserver jabberd/s2s[9722]: failed to load local SSL pemfile, SSL will not be available to peers
Nov 8 05:28:25 myserver jabberd/resolver[9717]: attempting connection to router at 127.0.0.1, port=5347
Nov 8 05:28:25 myserver jabberd/resolver[9717]: [4] [router] write error: Broken pipe (32)
Nov 8 05:28:25 myserver jabberd/resolver[9717]: connection to router closed
Nov 8 05:28:25 myserver jabberd/resolver[9717]: attempting reconnect (3 left)
Nov 8 05:28:25 myserver jabberd/sm[9718]: starting up
Nov 8 05:28:25 myserver jabberd/sm[9718]: id: myserver.local
Nov 8 05:28:25 myserver jabberd/router[9719]: loaded user table (1 users)
Nov 8 05:28:25 myserver jabberd/router[9719]: couldn't open filter file /etc/jabberd/router-filter.xml: No such file or directory
Nov 8 05:28:25 myserver jabberd/sm[9718]: initialised storage driver 'sqlite'
Nov 8 05:28:25 myserver jabberd/sm[9718]: modules search path: /var/jabberd/modules/jabberd2
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-last' added to chain 'sess-end' (order 0 index 0 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'validate' added to chain 'in-sess' (order 0 index 1 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'privacy' added to chain 'in-sess' (order 1 index 2 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'roster' added to chain 'in-sess' (order 2 index 3 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'vacation' added to chain 'in-sess' (order 3 index 4 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-vcard' added to chain 'in-sess' (order 4 index 5 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-ping' added to chain 'in-sess' (order 5 index 6 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-private' added to chain 'in-sess' (order 6 index 7 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'disco' added to chain 'in-sess' (order 7 index 8 seq 0)
Nov 8 05:28:25 myserver jabberd/router[9719]: [127.0.0.1, port=5347] listening for incoming connections
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'amp' added to chain 'in-sess' (order 8 index 9 seq 0)
Nov 8 05:28:25 myserver jabberd/s2s[9722]: attempting connection to router at 127.0.0.1, port=5347
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'offline' added to chain 'in-sess' (order 9 index 10 seq 0)
Nov 8 05:28:25 myserver jabberd/router[9719]: [127.0.0.1, port=63455] connect
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'announce' added to chain 'in-sess' (order 10 index 11 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'presence' added to chain 'in-sess' (order 11 index 12 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'deliver' added to chain 'in-sess' (order 12 index 13 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'session' added to chain 'in-router' (order 0 index 14 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'validate' added to chain 'in-router' (order 1 index 1 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'presence' added to chain 'in-router' (order 2 index 12 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'privacy' added to chain 'in-router' (order 3 index 2 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'privacy' added to chain 'out-router' (order 0 index 2 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-last' added to chain 'pkt-sm' (order 0 index 0 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-ping' added to chain 'pkt-sm' (order 1 index 6 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-time' added to chain 'pkt-sm' (order 2 index 15 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-version' added to chain 'pkt-sm' (order 3 index 16 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'amp' added to chain 'pkt-sm' (order 4 index 9 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'disco' added to chain 'pkt-sm' (order 5 index 8 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'announce' added to chain 'pkt-sm' (order 6 index 11 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'help' added to chain 'pkt-sm' (order 7 index 17 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'echo' added to chain 'pkt-sm' (order 8 index 18 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'roster' added to chain 'pkt-user' (order 0 index 3 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'presence' added to chain 'pkt-user' (order 1 index 12 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-vcard' added to chain 'pkt-user' (order 2 index 5 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'amp' added to chain 'pkt-user' (order 3 index 9 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'deliver' added to chain 'pkt-user' (order 4 index 13 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'vacation' added to chain 'pkt-user' (order 5 index 4 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'offline' added to chain 'pkt-user' (order 6 index 10 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'disco-publish' added to chain 'pkt-user' (order 7 index 19 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-last' added to chain 'pkt-user' (order 8 index 0 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'session' added to chain 'pkt-router' (order 0 index 14 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'disco' added to chain 'pkt-router' (order 1 index 8 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'active' added to chain 'user-load' (order 0 index 20 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'roster' added to chain 'user-load' (order 1 index 3 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'roster-publish' added to chain 'user-load' (order 2 index 21 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'privacy' added to chain 'user-load' (order 3 index 2 seq 3)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'disco-publish' added to chain 'user-load' (order 4 index 19 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'active' added to chain 'user-create' (order 0 index 20 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'active' added to chain 'user-delete' (order 0 index 20 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'disco-publish' added to chain 'user-delete' (order 2 index 19 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'offline' added to chain 'user-delete' (order 3 index 10 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'privacy' added to chain 'user-delete' (order 4 index 2 seq 4)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'roster' added to chain 'user-delete' (order 5 index 3 seq 3)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'vacation' added to chain 'user-delete' (order 6 index 4 seq 3)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-last' added to chain 'user-delete' (order 7 index 0 seq 3)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-private' added to chain 'user-delete' (order 8 index 7 seq 1)
Nov 8 05:28:25 myserver jabberd/sm[9718]: module 'iq-vcard' added to chain 'user-delete' (order 9 index 5 seq 2)
Nov 8 05:28:25 myserver jabberd/sm[9718]: version: jabberd sm 2.1.24.1-326
Nov 8 05:28:25 myserver jabberd/c2s[9720]: [myserver.com] configured; realm=myserver.com, registration disabled
Nov 8 05:28:25 myserver jabberd/c2s[9720]: attempting connection to router at 127.0.0.1, port=5347
Nov 8 05:28:25 myserver jabberd/router[9719]: [127.0.0.1, port=63456] connect
Nov 8 05:28:25 myserver jabberd/sm[9718]: attempting connection to router at 127.0.0.1, port=5347
Nov 8 05:28:25 myserver jabberd/router[9719]: [127.0.0.1, port=63457] connect
Nov 8 05:28:25 myserver jabberd/router[9719]: [127.0.0.1, port=63457] authenticated as jabberd
Nov 8 05:28:25 myserver jabberd/router[9719]: [127.0.0.1, port=63455] authenticated as jabberd
Nov 8 05:28:25 myserver jabberd/router[9719]: [127.0.0.1, port=63456] authenticated as jabberd
Nov 8 05:28:25 myserver jabberd/sm[9718]: connection to router established
Nov 8 05:28:25 myserver jabberd/router[9719]: [myserver.local] online (bound to 127.0.0.1, port 63457)
Nov 8 05:28:25 myserver jabberd/sm[9718]: ready for sessions
Nov 8 05:28:25 myserver jabberd/s2s[9722]: connection to router established
Nov 8 05:28:25 myserver jabberd/router[9719]: [s2s] set as default route
Nov 8 05:28:25 myserver jabberd/router[9719]: [s2s] online (bound to 127.0.0.1, port 63455)
Nov 8 05:28:25 myserver jabberd/s2s[9722]: [::, port=5269] listening for connections
Nov 8 05:28:25 myserver jabberd/s2s[9722]: ready for connections
Nov 8 05:28:25 myserver jabberd/c2s[9720]: connection to router established
Nov 8 05:28:25 myserver jabberd/router[9719]: [c2s] online (bound to 127.0.0.1, port 63456)
Nov 8 05:28:25 myserver jabberd/c2s[9720]: [::, port=5222] listening for connections
Nov 8 05:28:25 myserver jabberd/c2s[9720]: ready for connections
Nov 8 05:28:25 myserver servermgrd[67]: servermgr_jabber[N]: jabberd service startup completed.
Nov 8 05:28:25 myserver servermgrd[67]: portmaplist: synch needed /private/etc/nat/autoportmap.plist
Nov 8 05:28:25 myserver org.jabber.proxy65[9726]: /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/twis ted/persisted/sob.py:12: DeprecationWarning: the md5 module is deprecated; use hashlib instead
Nov 8 05:28:25 myserver org.jabber.proxy65[9726]: import os, md5, sys
Nov 8 05:28:25 myserver org.jabber.proxy65[9726]: /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/twis ted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
Nov 8 05:28:25 myserver org.jabber.proxy65[9726]: import sha
Nov 8 05:28:26 myserver jabberd/router[9719]: [127.0.0.1, port=63461] connect
Nov 8 05:28:26 myserver jabberd/router[9719]: [127.0.0.1, port=63461] authenticated as proxy65.myserver.com
Nov 8 05:28:26 myserver jabberd/router[9719]: [proxy65.myserver.com] online (bound to 127.0.0.1, port 63461)
Nov 8 05:28:26 myserver jabberd/router[9719]: [127.0.0.1, port=63462] connect
Nov 8 05:28:26 myserver jabberd/router[9719]: [127.0.0.1, port=63462] authenticated as conference.myserver.com
Nov 8 05:28:26 myserver jabberd/router[9719]: [conference.myserver.com] online (bound to 127.0.0.1, port 63462)
Nov 8 05:28:27 myserver jabberd/resolver[9717]: attempting connection to router at 127.0.0.1, port=5347
Nov 8 05:28:27 myserver jabberd/router[9719]: [127.0.0.1, port=63467] connect
Nov 8 05:28:27 myserver jabberd/router[9719]: [127.0.0.1, port=63467] authenticated as jabberd
Nov 8 05:28:27 myserver jabberd/resolver[9717]: connection to router established
Nov 8 05:28:27 myserver jabberd/router[9719]: [resolver] online (bound to 127.0.0.1, port 63467)
Nov 8 05:28:27 myserver jabberd/resolver[9717]: ready to resolve
Nov 8 05:28:33 myserver jabberd/router[9719]: [127.0.0.1, port=63475] connect
Nov 8 05:28:33 myserver jabberd/router[9719]: [127.0.0.1, port=63475] authenticated as pubsub.myserver.com
Nov 8 05:28:33 myserver jabberd/router[9719]: [pubsub.myserver.com] online (bound to 127.0.0.1, port 63475)
This is what it does when I try to connect from a client. The client just keeps getting a username/password prompts over and over. (12.34.56.78 is of course a made up IP) It will do this repeatedly with a different port number, going higher and higher. In some cases it will add "is being rate limited" This will just loop and loop until I shut iChat and Push Notifications down.
Nov 8 05:32:02 myserver jabberd/c2s[9720]: [7] [::ffff:12.34.56.78, port=50830] connect
Nov 8 05:32:02 myserver jabberd/c2s[9720]: [7] [::ffff:12.34.56.78, port=50830] disconnect jid=unbound, packets: 0
Is all of that supposed to bind to 127.0.0.1? Another posting on here said to try and reinstall just the serveressentials.pkg from the disc. I tried that on a previous install and it didn't seem to do anything. Is there any kind of repair or restore script that can be run in situations like power failures where the thing doesn't shut down gracefully? jabberd seems pretty delicate.
Thanks in advance

Sure, Tim
changeip -checkhostname
Primary address = 10.0.1.10
Current HostName = myserver.com
DNS HostName = myserver.com
The names match. There is nothing to change.
dirserv:success = "success"
sudo serveradmin settings jabber
jabber:s2sRestrictDomains = no
jabber:authLevel = "ANYMETHOD"
jabber:savedChatsLocation = "/var/jabberd/message_archives"
jabber:dataLocation = ""
jabber:enableAutoBuddy = yes
jabber:enableXMPP = yes
jabber:sslKeyFile = ""
jabber:initialized = yes
jabber:logLevel = "ALL"
jabber:sslCAFile = ""
jabber:requireSecureS2S = no
jabber:serviceMode = "ALL"
jabber:savedChatsArchiveInterval = 7
jabber:jabberdDatabasePath = "/private/var/jabberd/sqlite/jabberd2.db"
jabber:hosts:arrayindex:0 = "myserver.com"
jabber:eventLogArchiveInterval = 7
jabber:enableSavedChats = yes
jabber:s2sAllowedDomains = emptyarray
It was working perfect before two things - power outage, and I had turned on the Firewall service because I wanted to see how it worked, but it's turned off and not even an active service.
Thanks in advance for the attempt!

I had a power failure 2 days ago, have power now, but cannot send email from my iPad. Everything was fine before that. The box says cannot send mail, the user name or password for Gmail is incorrect. I haven't changed anything. I need help. Thanks

Hi
I had a power failure 2 days ago, my computer is running again, but now I cannot send email from my iPad using Cox or my gmail account. I am receiving mail in my Cox account but not my gmail account.It was working fine until the power failure. It keeps telling me, the user name or password for Gmail is incorrect. I have not changed anything. I don't know what is wrong. Can anyone help me? Thanks

I agree, unplug and replug your router, then reset your iPad by holding down the sleep and home buttons, ignore the red power down slider, and wait til you see the silver apple. let it reboot and then try your connection.
Chances are rebooting the router will help. You may also need to talk to cox. They may need to reset something on their end.

I'm trying to connect through the FTP client Filezilla. When I try to login with the wizard, it gives me a "503 Failure of Data Connection" reply; when I attempt to login myself, it gives me a "530 Login Authentication Failed." HELP!!!

My current softward is: Mac OS X Lion 10.7.5 (11G63)
When I attempt to use the Filezilla connection wizard I get the following message:
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.7.1.1
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP 27.0.19.56 ch-a-bj-fg
Response: 200 OK
PREP 52470
Response: 200 Using port 52470, data token 1871898076
PORT 27,0,19,56,204,246
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
When I attempt to login Host/Username/Password myself I get the following message:
Status:          Resolving address of amyhoney.com
Status:          Connecting to 184.168.54.1:21...
Status:          Connection established, waiting for welcome message...
Response:          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response:          220-You are user number 12 of 500 allowed.
Response:          220-Local time is now 04:05. Server port: 21.
Response:          220-This is a private system - No anonymous login
Response:          220 You will be disconnected after 3 minutes of inactivity.
Command:          USER 5475****
Response:          331 User 5475**** OK. Password required
Command:          PASS ********************
Response:          530 Login authentication failed
Error:          Critical error
Error:          Could not connect to server
Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
HELP!!

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Unable to Load Windows 7 after a power failure

My windows 7 workstation was in a sleep mode when a power failure happened. after trying to power up the machine it tries to resume windows session but stucks after displaying an error unable to find saved session. it gives an option to either delete saved
session and boot or locate the session, but none of the periferal devices are responding, so I am unable to select either option.
I have a standard 102 logitech keyboard connected to that workstation. it works wen I select to enter a bios on the start up, but does not respond to any other prompts.
Any advice?

In addition, try to boot into safe mode and check the results.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Mag Safe power cord sparks when connected or disconnected--whereupon the MacBook Pro 13'' dumps date and time, and all passwords, plus any/all unsaved information.

I purchased my MacBook Pro 13" from the Apple Store in Tucson, AZ, in mid-January. Since then, every time the Mag-Safe cord is jostled, not even disconnected, sparks fly from the power terminal on the computer, the computer shuts down, and dumps its passwords, as well as the date and time.
Any work in progress is also lost.
I work overseas, and Apple's advice was to give them my credit card number, await shipment of a new power supply and cord, and then, when I return the old power supply and cord, i'd receive a credit. That won't work, as packages from the US to my location take weeks if they arrive at all. There is no Apple Store within a reasonable distance. Or, Apple suggests, when I'm home on leave in mid-June, I should bring the computer to the Apple Store for repair--I have only days in which to do that, but I suppose I'll need to try. My concern is that I'll need to return overseas without my computer and won't be able to retrieve it for months, until my next leave.
This issue shows up elsewhere online. Is there a short in the power terminal in the computer, or on the Mag-Safe power cord, or within the computer itself? It's a known issue, thus I wonder why it hasn't been fixed.

Odd, but here's a copy of Page 1 of the links I got:
Apple Portables: Troubleshooting MagSafe adapters26 May 2011 ... If the spark comes from somewhere other than the blades of the plug, .... Apple Portables: Reducing cable strain on your MagSafe power ...
support.apple.com › Support - Cached
Apple - Support - Discussions - Magsafe sparked when plugging into ...
2 posts - 2 authors - Last post: 22 FebI plugged my magsafe adapter into my macbook pro (mid 2010 model i think ...
discussions.apple.com › ... › Power and Batteries on a MacBook Pro - Cached
Mag Safe power cord sparks when...: Apple Support Communities6 Jun 2011 ... Mag Safe power cord sparks when connected or disconnected ...
https://discussions.apple.com/message/15350172
Show more results from apple.com
Apple power brick sparks lawsuit • The Register
- 4:52am6 May 2009 ... Apple power brick sparks lawsuit ... Apple, for its part, made the MagSafe one of the featured, um, features of the MacBook Pro when it ...
www.theregister.co.uk/2009/05/06/apple_magsafe_lawsuit/ - Cached - Similar
My MagSafe sparks everytime - Philippine Mac Users Group
10 posts - 6 authors - Last post: 31 Mar 2008Guys, I seem to have a problem, well you see my MagSafe sparks everytime I plug it into a power source. I'm experiencing this problem at ...
www.philmug.ph › ... › Mobile Macs › Archives - Cached - Similar
@apple MagSafe failure sparking all over the place, not recalled ...1 Jan 2011 ... ryanol: @apple MagSafe failure sparking all over the place, not recalled? Not repairable 79 bucks later #applefail another design fail for ...
constantlycomplaining.com/.../@apple-magsafe-failure-sparking-all-over-place,-not-recalled%3F-not-repairable-79-bucks-later- - Cached
Great Northern Insurance Company sues Apple over fire-causing MagSafe2 Dec 2010 ... Over the past few years, Apple has been on the receiving end of more ... indicating that Apple's MagSafe adapters were prone to sparking and ...
www.edibleapple.com/great-northern-insurance-company-sues-apple-over-fire-causing-magsafe-adapter/ - Cached
Amazon.com: Apple MagSafe 60W Power Adapter for MacBook MA538LL/A ...Genuine Apple 60W MagSafe Power Adapter for MacBook A1184 · 3.9 out of 5 stars (11) .... like it was burning.. the covering on the cord melted off.. sparked ...
www.amazon.com › ... › Laptop Battery Chargers - Cached - Similar
Insurance company claims Apple's 'dangerous' MagSafe started fire ...
40 posts - 29 authors - Last post: 30 Nov 2010A newly filed lawsuit claims that Apple's MagSafe charger, ... Apple to heating, burning and sparking problems with its MagSafe adapters," ...
forums.appleinsider.com › Future Apple Hardware - Cached
Spark it up!!! "Apple announces Magsafe out of warranty ...
3 posts - 3 authors - Last post: 19 Aug 2008Info.: "This one concerns faulty Magsafe power adaptors that shipped with MacBook (13-inch Late 2006), MacBook (13-inch), ...
forums.macresource.com/read.php?1,546534,546743 - Cached

Emergency !! Major Power Failure - Publisher / Subscriber& Connection wont start...

Similar Messages

Maybe you are looking for