EMERGENCY-Please Reply ASAP.

Hi
We have production database(Oracle10g r2 (10.2.0.1.0)). we have following information on database.
NLS_LANGUAGE -AMERICAN
NLS_TERRITORY- AMERICA
NLS_CHARACTERSET- AL32UTF8
NLS_NCHAR_CHARACTERSET- AL16UTF16.
NLS_LENGTH_SEMANTICS-BYTE
Application group tells us that they are getting problem becuase of NLS_LENGTH_SEMANTICS. They told us to make it CHAR instead of BYTE.Please advise me. Can i go ahead with this change? If so, what are steps i need to perform.
Regards,
RJ.

alter system set nls_length_semantics=char scope=both
It says system is altered
Butstill it is showing BYTE. I'm really not sure about the opportunity to change this parameter, but to be taken in account, you need to bounce your database.
Once more, how your application team decide that's this parameter the cause of their trouble ?
Nicolas.

Similar Messages

Premiere CS5 Emergency - Please Reply ASAP

Hi everyone,
I'm in a real jam: I've been working on an hour long movie complete with special effects and many layers of audio, and just recently PP CS5 has frozen up. It's seemed to be gradual as I've added more and more clips, now when I open my project, it will just freeze. It seemed to get much worse after I rendered my movie in PP. I've been using 1920x1080 .mov clips straight from my DSLR and putting them into PP. I have no idea what the reason is for this; is it a random CS5 glitch? Is it a codec problem? Is my footage too big for my computer (i7 + 8GB RAM + very low end GPU)? Do I need a better computer for working with footage this big?
I would greatly appreciate any input.

Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size
Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0

How to put continuos (desired format) of dates in numbers spreadsheet and how to do it? please reply asap i need it..

how to put continuos (desired format) of dates in numbers spreadsheet and how to do it? please reply asap i need it..

This is the definition for "continuo" from Apple's dictionary:
continuo |kənˈtinyəˌwō | (also basso continuo) noun (pl. continuos) (in baroque music) an accompanying part that includes a bass line and harmonies, typically played on a keyboard instrument and with other instruments such as cello or bass viol.
Presumably you mean something else. Your chances of getting replies that can help you will improve with a clearly stated question.
SG

HT6533 Where can I find the third party app? I'm really in trouble that I can't record and check my blood glucose. Of cause I exported the data from app, but It's not readable for me. Please reply ASAP and give me other solution.

Where can I find the third party app?
I'm really in trouble that I can't record and check my blood glucose.
Of cause I exported the data from app, but It's not readable for me.
Please reply ASAP and give me other solution.

You find third-party apps in the App Store. What app are you looking for? Due to problems, Apple removed the ability to record that information in Health. You can always go back to whatever you used before three weeks Health was released. Why can you not check and record your blood glucose? I would assume you check it using blood samples and a glucose meter which has nothing to do with your phone. You should be able to record it in any number of apps, from Notes to purpose made third-party apps.

IMac G3 upgrade from os9 to osx 10.2 possible? Please reply asap

Hi, i have a apple iMac G3 DV strawberry machine currently running os9.0.4, it has 20gb hardrive and 256mb RAM.
Is is possible to upgrade the machine straight to OSX 10.2 with the original disks based on the specifications i have given?
Please reply asap, as i would like to get it up and running for my partner

If the iMac's CPU speed is 333MHz or below, you need to partition the drive so that the first partition is less than 8GB, and then install Mac OS X onto that partition.
If the iMac's CPU speed is 350MHz or above, you need to update to 9.1, and then run the iMac firmware updater.
(11483)

Why i can't sign in Twitter in my Mozilla Firefox? Please reply ASAP

I have latest version of Firefox. I can access twitter.com but each time i want to sign in, i can't. After fill username & password column, i always redirected to beginning page of Twitter. I can't sign in. Please reply ASAP.

Make sure you don't block cookies for twitter.com.

Please reply ASAP

Hi
I have Microsoft Windows Server 2003 R2 standard X64 Edition.I tried to install oracle 9i(9.2.0.1 32 bit for windows) on this server but installation was never successful. Do i need to go for a Oracle 9i(9.2.0.1 64bit for windows) or any other problem? Even i completely remove windows server and reinstall it completely but still problem is there. Please reply me ASAP as this is our production server.
Thanks.
Regards,
RJ.

From Oracle:
32-bit Information
Currently this platform is ONLY certified 32-bit Oracle on a 32-bit operating system.
There is only 32bit 9i available for 32bit OS on this platform, even if hardware architecture is 64bit. So you need either Windows 32bit or you have to go for 10g.
Werner

Wether to use NTFS for mac osx???? please reply ASAP

I just bought a seagate 1tb hd..nd it has mac installer o. It..which uses NTFS for mac osx software go make it mac and windows compatible. .
After I installed it hd ws working gr8 ..bt mu machine started showing "no bootable disk--insert boot disk and press any key" on a black screen..now I hav started the mac somehow bt dunno whether to use the software again or not...
Please help asap. .

iamjaycee, greetings; Please note this extract from Wikipedia. Now there is software available that will allow NFTS to operate in a Mac environment, but it has had mixed reviews.
If there is something that I may have overlooked, please do advise. I am one who believes that the learning process should never cease.
Ciao.

Database and application getting hange (urgent please reply asap)

hi,
in alerlt log i found
Process q003 died, see its trace file
Thu Nov 24 10:50:36 IST 2011
ksvcreate: Process(q003) creation failed
Thu Nov 24 10:56:21 IST 2011
ksvcreate: Process(m000) creation failed
Thu Nov 24 11:03:30 IST 2011
kkjcre1p: unable to spawn jobq slave process
Thu Nov 24 11:03:30 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/bdump/prod_cjq0_13539.trc:
Thu Nov 24 11:04:21 IST 2011
Beginning log switch checkpoint up to RBA [0x25b4.2.10], SCN: 14824976075
Thu Nov 24 11:04:21 IST 2011
Thread 1 advanced to log sequence 9652 (LGWR switch)
Current log# 8 seq# 9652 mem# 0: /log1/PROD/log08a.dbf
Current log# 8 seq# 9652 mem# 1: /log1/PROD/log08b.dbf
Thu Nov 24 11:06:40 IST 2011
ksvcreate: Process(m000) creation failed
Thu Nov 24 11:10:00 IST 2011
Completed checkpoint up to RBA [0x25b4.2.10], SCN: 14824976075
Thu Nov 24 11:10:34 IST 2011
kkjcre1p: unable to spawn jobq slave process
Thu Nov 24 11:10:34 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/bdump/prod_cjq0_13539.trc:
Thu Nov 24 11:12:55 IST 2011
ksvcreate: Process(q000) creation failed
Thu Nov 24 11:15:12 IST 2011
kkjcre1p: unable to spawn jobq slave process
Thu Nov 24 11:15:12 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/bdump/prod_cjq0_13539.trc:
Thu Nov 24 11:17:14 IST 2011
ksvcreate: Process(m000) creation failed
please reply it urgent..
in trc file
$ cat prod_cjq0_13539.trc
Dump file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/bdump/prod_cjq0_13539.
trc
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /appl2/oracle2/proddb/10.2.0
System name: SunOS
Node name: devserver
Release: 5.9
Version: Generic_118558-06
Machine: sun4u
Instance name: PROD
Redo thread mounted by this instance: 1
Oracle process number: 10
Unix process pid: 13539, image: oracle@devserver (CJQ0)
*** 2011-11-24 10:57:22.769
*** SERVICE NAME:(SYS$BACKGROUND) 2011-11-24 10:57:22.430
*** SESSION ID:(392.1) 2011-11-24 10:57:22.430
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 10:57:32.840
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 10:57:42.940
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 10:57:53.030
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 10:58:03.120
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 10:58:13.200
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:03:30.801
*** 2011-11-24 11:07:41.160
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:07:51.240
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:08:01.320
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:08:11.390
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:08:21.480
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:08:31.580
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:10:34.930
*** 2011-11-24 11:13:56.060
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:14:06.150
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:14:16.250
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:14:26.330
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:14:36.410
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:14:46.480
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:15:12.996
*** 2011-11-24 11:18:15.140
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:18:25.240
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:18:35.340
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:18:53.340
Waited for process J000 to initialize for 90 seconds
*** 2011-11-24 11:18:53.340
Process diagnostic dump for J000, OS id=3356
*** 2011-11-24 11:19:29.960
loadavg : 0.08 0.25 0.78
swap info: free_mem = 91.27M rsv = 10468.67M
alloc = 9840.79M avail = 291.52 swap_free = 919.41M
skgpgcmdout: read() for cmd /bin/ps -elf | /bin/egrep 'PID | 3356' | /bin/grep -
v grep timed out after 15.000 seconds
Skipping stack dump because max dump time exceeded.
Process diagnostic dump actual duration=36.292000 sec
(max dump time=30.000000 sec)
*** 2011-11-24 11:19:29.960
*** 2011-11-24 11:19:40.060
Waited for process J000 to initialize for 100 seconds
*** 2011-11-24 11:19:40.060
Process diagnostic dump for J000, OS id=3356
*** 2011-11-24 11:20:08.770
loadavg : 0.27 0.28 0.77
swap info: free_mem = 92.57M rsv = 10465.16M
alloc = 9837.60M avail = 297.86 swap_free = 925.42M
skgpgcmdout: read() for cmd /bin/ps -elf | /bin/egrep 'PID | 3356' | /bin/grep -
v grep timed out after 15.000 seconds
*** 2011-11-24 11:20:51.830
Stack:
skgpgcmdout: read() for cmd /bin/sh -c '/usr/proc/bin/pstack 3356 2>&1' timed ou
t after 1.290 seconds
Process diagnostic dump actual duration=1 min 11 sec
(max dump time=30.000000 sec)
*** 2011-11-24 11:20:51.830
*** 2011-11-24 11:21:01.930
Waited for process J000 to initialize for 110 seconds
*** 2011-11-24 11:21:01.930
Process diagnostic dump for J000, OS id=3356
loadavg : 0.12 0.24 0.71
swap info: free_mem = 91.25M rsv = 10487.99M
alloc = 9844.82M avail = 272.81 swap_free = 915.98M
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY T
IME CMD
8 Z oracle2 3356 1 0 0 0
:00 <defunct>
*** 2011-11-24 11:22:36.567
Skipping stack dump because max dump time exceeded.
Process diagnostic dump actual duration=1 min 34 sec
(max dump time=30.000000 sec)
*** 2011-11-24 11:22:36.567
Killing process (ospid 3356): (reason=x4 error=0)
... and the process is still alive after kill!
*** 2011-11-24 11:28:16.400
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:28:26.470
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:28:36.560
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:28:46.640
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:28:56.730
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:29:06.810
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:29:48.503
*** 2011-11-24 11:35:26.030
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:35:36.130
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:35:46.210
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:35:56.310
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:36:06.390
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:36:16.490
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:38:51.157
*** 2011-11-24 11:47:42.830
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:47:52.910
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:48:03.000
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:48:13.060
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:48:23.140
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:48:33.230
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:49:12.586
*** 2011-11-24 11:52:35.420
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:52:45.520
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:52:55.610
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:53:05.700
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:53:15.790
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:53:25.890
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:53:59.129
*** 2011-11-24 11:57:08.260
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:57:18.350
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:57:28.450
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:57:38.540
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:57:48.640
Waited for process J000 to initialize for 100 seconds
*** 2011-11-24 11:57:48.640
Process diagnostic dump for J000, OS id=4205
loadavg : 0.22 0.33 0.67
swap info: free_mem = 91.70M rsv = 10505.02M
alloc = 9858.01M avail = 251.46 swap_free = 898.47M
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY T
IME CMD
8 S oracle2 4205 1 0 39 20 ? 410092 ? 11:57:12 ? 0
:00 ora_j000_PROD
*** 2011-11-24 11:58:28.337
Skipping stack dump because max dump time exceeded.
Process diagnostic dump actual duration=39.697000 sec
(max dump time=30.000000 sec)
*** 2011-11-24 11:58:28.337
*** 2011-11-24 11:58:38.430
Waited for process J000 to initialize for 110 seconds
*** 2011-11-24 11:58:38.430
Process diagnostic dump for J000, OS id=4205
*** 2011-11-24 11:59:10.850
loadavg : 0.59 0.40 0.68
swap info: free_mem = 91.31M rsv = 10505.02M
alloc = 9858.01M avail = 251.19 swap_free = 898.20M
skgpgcmdout: read() for cmd /bin/ps -elf | /bin/egrep 'PID | 4205' | /bin/grep -
v grep timed out after 15.000 seconds
Skipping stack dump because max dump time exceeded.
Process diagnostic dump actual duration=32.420000 sec
(max dump time=30.000000 sec)
*** 2011-11-24 11:59:10.850
Killing process (ospid 4205): (reason=x4 error=0)
... and the process is still alive after kill!
$
now i am not able to connect database

Please see these docs.
Ksvcreate: Process(M001) Creation Failed , Database hang [ID 1233079.1]
ORA-00610 And/Or "unable to spawn jobq slave process " And/Or "Process(<>) creation failed" In The Alert Log And/Or TNS-12518/ TNS-12500 In Listener Log [ID 416244.1]
DATABASE CRASH WITH SGA_TARGET [ID 747812.1]
ORA-27300 ORA-27301 ORA-27302 ORA-27303 skgpspawn5 [ID 1125188.1]
Database Crashes With Ora-00449 and Ora-00601 [ID 730287.1]
If this is your production database, please log a severity 1 SR!
Thanks,
Hussein

I bought an iPad Mini on States 2 Months ago and yesterday i saw that the LCD have a black line in the middle can i use the warranty here on Power Mac Philippines ? Please Reply ASAP

I bought an iPad Mini on States 2 Months ago and yesterday i saw that the LCD have a black line in the middle can i use the warranty here on Power Mac Philippines ? Please Reply ASAP

Hi
You should ask your relative to physically take the iPhone to the store rather than shipping it because as diesel vdub has said:
"No Apple store will accept an iPhone shipped to them"
All you have to do is safely pack and ship your iPhone from the Philppines to your California-based relative.
HTH?
Tony

Trigger Mutating Probelm...Please reply ASAP.

Dear all,
I have a table Hdr which is Header table for all tran tables i want to update
a field update_date in Hdr every time update (DML) is fired,
i can't enforce this at form level because i want to keep track even at sql prompt changes.
there is other option DBA Auditing but if sys updates the table it does n't changes
and i can't get the value in update_date field
if i write database trigger to update the field it is giving mutating error.
please find a right solution and reply
thanks for every effort u put to solve this.
thank u once agin.
Raj
mail : [email protected]

You are probably getting the mutating table error because you are trying to use an actual update statement inside the trigger. You cannot do any DML on the table that the trigger is on. You can access the fileds of the table using the :new.column_name syntax. So, the correct way to write your auditing trigger is something like:
CREATE TRIGGER my_audit
BEFORE INSERT OR UPDATE ON hdr
FOR EACH ROW
upd_date DATE;
BEGIN
SELECT sysdate INTO upd_date FROM dual;
:new.update_date := upd_date;
END;TTFN
John

Live Scenario Please Reply ASAP

Dear Gurus
There is a live scenario. As you all must be knowing that the exchange rate changes every day.
I will explain the whole scenario.
The sales order was prepared on an exchange rate of Rs 46 for one Dollar. But when i am billling the exchage rate has changed to Rs 48 for one Dollar. How can it be changed automatically with out updation in the T Code 0B08 i.e. T Curr
Please guide and any further clarifications please revert back
Satish Kullu

Five Phases of ASAP methodlogy.
Phase 1: Project Preparation - The purpose of this phase is to provide initial planning and preparation for your SAP project.
Phase 2: Business Blueprint - The purpose of this phase is to achieve a common understanding of how the company intends to run its business within the SAP System. The result is the Business Blueprint, a detailed documentation of the results gathered during requirements workshops. The Business Blueprint document represents the business process requirements of the company. It is the agreed statement of how the company intends to run its business within the SAP System.
Phase 3: Realization - The purpose of this phase is to implement all the business process requirements based on the Business Blueprint. The system configuration methodology is provided in two work packages: Baseline (major scope); and Final configuration (remaining scope).
Phase 4: Final Preparation - The purpose of this phase is to complete the final preparation (including testing, end user training, system management and cutover activities) to finalize your readiness to go live. The Final Preparation phase also serves to resolve all critical open issues. On successful completion of this phase, you are ready to run your business in your live SAP System.
Phase 5: Go Live & Support - The purpose of this phase is to move from a project-oriented, pre-production environment to live production operation.
Additionally:
Some additional Infomation on ASAP methodology:
Phase 1 - Project Preparation
Change Charter - Goals and objectives of Organizational Change Management
Project Plan - This is a first cut focusing on milestones and Work Packages; details to come.
Scope - Sets the initial definition of the project; input from sales cycle.
Project Team Organization - Sets the who of the project: Standards & Procedures - Sets the why and how of the project.
Phase 2 - Business Blueprint - Requirements reviewed for each SAP Reference Structure item and defined using CI Templates (in the Q&Adb). Business Blueprint - This is the output of the Q&Adb and is the key document for Phase 3.
Phase 3 - Realization - Master Lists - Define business scenarios and R/3 transactions to be realized in the system. BPP - Business Process Procedures representing R/3 transactions; used for unit testing & documentation. Planning - Defines how the configuration will be done and how it will be tested. Development Programs - Provides details of the external programming requirements. EU Training Material - End User training material and process documentation.
Phase 4 - Final Preparation Stress & Volume Tests - Plans for confirming the production hardwares capabilities
Cutover Plan - The details of how to move to the production environment and go live
Conduct End User Training - Delivery of the necessary levels of R/3 End User training prior to going live
Phase 5 - Go Live & Support: Ensuring system performance through SAP monitoring and feedback.
Reward points if helpful.
Regards,
Rajesh Banka

PLEASE REPLY ASAP.Unbale to connect to oracle data base using JSP.

hi,
I am not able to connect to oracle data base using JSP. PFB the code and out put.
<html>

<%@ page import = "java.sql.*" %>
<body>
<%
try
out.println("hi<br>");
Connection conn = DriverManager.getConnection("jdbc:oracle:oci:@xxx.xxx.xx.xxx:xxxx:flstr800","user","paswordd");
out.println("connected<br>");
catch (SQLException e)
out.println("ERROR: failed to connect!");
out.println("ERROR: " + e.getMessage());
e.printStackTrace();
return;
%>
</body>
</html>
OUTPUT:
hi
ERROR: failed to connect! ERROR: No suitable driver found for jdbc:oracle:oci:@host:port
Please guide me on this issue.
Edited by: user10997061 on Apr 10, 2009 4:27 AM

I definitely do not know much about JSP but
http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.html
indicates
<quote>
This URL connects to the same database using the the OCI driver and the SID inst1 without specifying the username or password.
jdbc:oracle:oci:@myhost:1521:inst1
<quote>
I do not see the port information in your connect string. Is that an issue?

Please reply ASAP-Discoverer and BI Publisher

Hi,
Could some one please list the pros and cons from switching from Discoverer to BI Publisher?
I know it seems kinda vague but anything you have experienced would be helpful.
New to both tools at this moment.
Thanks so much!

Hi,
BI Publisher targets formal reporting, call it "document" reporting if you like. Oracle Discoverer targets adhoc interactive reporting. Ie. With BI Publisher developers create reports, users run the the reports. With Discoverer developers create views of objects, and users create their own reports on those objects with a lot of the background complexity taken out.
So both can happily co-exist and its not a choice of one or the other, or a case of moving from one to the other - it depends on your business requirements.
Gareth
http://garethroberts.blogspot.com

Vendor compliance codes fail to write off - can any please reply ASAP

Hi All,
Vendor compliance reason codes are failing to write off. Changes were made to the GL's and material. Codes involved in change-VCA,VCB,VCP, WVC. Does anyone know why this is happening and if you do let me know what has to be done about it.
Thanks

can you please make your question more clear?

EMERGENCY-Please Reply ASAP.

Similar Messages

Maybe you are looking for