[Emergency] SBS a320 speker system working full volume

Hi. I have Creative SBS a320 speaker system. Tomorrow we have a party. That speaker system will work on full volume about 2-3 hours. Can that make a problem with my speaker system?
Note: My english is bad sorry.

Hi,
It would be advisable not to have the speakers at full blast for long hours. Turn it to around 80% to 90%. If it's still not loud enough, adjust the volume on your computer instead.

Similar Messages

After Yosemite install, sound button on MacBook Pro doesn't work-stuck at full volume or Mute. Can't adjust slider in preferences, or use volume button on keyboard.

Just installed Yosemite on my MacBook Pro 15", Retina display, early 2013 build. After installation, I cannot adjust volume for speakers. It is either completely off (muted) or on a FULL VOLUME. Neither the speaker volume buttons on the keyboard or the Sound Output slider on the Systems Preferences works. The slider does not move from full volume and the speaker buttons do nothing. This is just awful--can't get any sound except at full volume which is ear-splitting.

Talked to Apple Support. The support person took a bit, but figured out that Yosemite changes the sound output default to the installed HDMI display speakers--and the Mac does not control those speakers. This recurs every time there's a restart. The Solution is to go to System Prefs>Sound and change the OUTPUT device to the Internal Speakers on the Mac. Then sound controls work perfectly. This has to be done every time the system restarts, at least until Apple sends out a fix for this bug.
If you have an external device attached with speakers, apparently the Mac wants to make that default output device. Note that in my system on the list of output devices, the Internal Speakers are the first in the list...that generally is the "default" output device--but Yosemite doesn't recognize that and makes the HDMI device default output.
Not perfect, but now that I know the fix, I can live with it until there's a permanent fix from Apple.

I don't have any volume. When I push the mute button or try to increase the volume up or down nothing happens. The volume shows up as if it were at full volume but no sound. I am so frustrated.

I need some help with the volume on my macbook pro. I am getting absolutely no sound no matter if I push the volume increase or decrease button. Nothing changes. The volume bar shows up as if it were at full volume but no sound and the mute button doesn't do anything either.
Please help.

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers.
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port or not, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so,uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

When using full volume on my iphone 4s the sounds cuts out but if I blow air into the speaker it comes back on is this a hardware issue or a software issue?

Just recently my iphone 4s speakers started acting up. I have restored it twice once to a back up and the other time as a new phone. The speakers get really staticy on full volume and then it cuts out but if I turn down the volume and blow air into the speakers it goes back to play fine until I turn up the volume again. I'm going to try to clean it out with a toothbrush and see if that helps. But I'm curious does this seem more like a hardware problem or is it a problem with the operating system and I should try to hold out until ios 6 comes out and see if that helps. I've read all the problems with this so I'm hesitant to send it in since there is no apple store around here and find out I have to pay to get it fixed. Tried to talk to them on the phone but since it's a week past ninety days I would have to purchase apple care in order to get any help but yet that's only available for 30 days after your purchase so I'm not sure how come they can offer that over the phone. Thanks for any help.

Thanks for the help. The problem just started suddenly. The problem I have is the closest Apple Store is 3 hours away so I would have to send it in and I don't want to send it to them and then be told I'd have to pay for it. Would they just send the phone back if you decide not to have it fixed. I will probably just get used to it or maybe it will fix itself one day.

2x LabVIEW Systems Engineer Full Time Positions – Sheffield and Bristol, UK

2x LabVIEW Systems Engineer - Full Time Positions – Sheffield and Bristol, UK
1.0      Description:
As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architecture primarily in the LabVIEW Programming Language and National Instruments Hardware Platforms. You will help customers from all kinds of industries on various issues, from getting started with LabVIEW software, to help with programming, debugging and onsite commissioning of complex systems including distributed embedded systems. There will also be items such as creating demos and working on proof of concepts. You must exhibit strong problem solving, communication and business acumen skills alongside a passion for technology. You will get the privilege of an insight into the engineering practices from a range of industries and be providing a consultancy on their system requirements.
2.0      Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦     Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦     Developing intuitive GUIs.
◦     Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦     Providing timely, accurate and effective solutions to technical problems.
◦     Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦     Reproducing and troubleshooting problems and incompatibilities in both software and hardware.
◦     Delivering professional and high quality, customer education courses.
◦     Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦     Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦     Working with the business development team to develop proof of concepts for customers.
◦     Travel 50% of the time.
3.0      Qualifications & Requirements:
◦     Minimum 2.1 honours degree in engineering or science related field, such as Electrical/electronic engineering, physics, mechatronics or computer science.
◦     Firm understanding and knowledge of National Instruments LabVIEW and TestStand, including LabVIEW FPGA and LabVIEW Embedded.
◦     Understanding of object oriented principles.
◦     Ability to pass CLA exam within the year.
◦     Knowledge and experience in instrumentation & control, and industrial automation is required.
◦     Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI, SCXI and cFP.
◦     Practical electrical debug experience.
◦     Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦     Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦     Must be able to handle multiple tasks and enjoy working with people.
◦     Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦     Excellent written, oral and presentation skills are key.
◦     Ability to deal effectively with customers to make them successful is essential.
◦     Ability to get along with others and function as a team player as well as work effectively alone.
◦     A proactive/can do attitude is vital and a happy view on life.
◦     Legal right to live and work in the UK. Sponsorship is not available.
◦     Must hold a full clean and valid UK driving license.
4.0      Location:
There are two positions for this role, one in Sheffield, South Yorkshire, UK and one in Bristol, UK
5.0      Reporting:
Systems Engineers will report to the Technical Director.
6.0      Salary:
Competitive salary based on level of experience.
7.0      Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Systems Engineer and the location for which you are applying in the email subject.

Hello,
I Aravindu.P completed M.Sc(Electronics & Instrumentation).I have one year experience working with Labview and embedded systems programming(Software and Hardware).I am very hardworking and sincerity.I want to working with industries like this.So please reply me.
Attachments:
Aravind_Resume (1).docx ‏18 KB

How do i get f10/f11 to work as volume buttons

how do i get f10/f11 to work as volume buttons,

Hold the FN key as you press F11 and F12 for volume up and down. If you'd like to have that as the default without the FN key then go to System Preferences > Keyboard > Keyboard tab > uncheck "use all F1, F2, etc. keys as standard function keys"

Z1 always on full volume with earphones

Hi,
After the Lollypop upgrade, the earphone always remains on full volume no matter even if I reduce the volume, it remains at full.
However if I go into Walkman->Sound effects, and switch off both clear audio+ and dynamic equaliser, it starts working as expected..
Looks like a bug in the new upgrade..
Is there any permanent fix for this?

Kindly try this:
- Go to Settings -> Apps -> Smart Connect -> Force stop, Unistall updates, Clear data.
- Go to Settings -> Apps -> All -> Audio settings -> Clear data and restart your phone.
- Then go to your Play Store and update Smart Connect again
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

All 8 cores working full power

In my video editing software I can set it in such way, that all my 8 cores work full power.
I have the activation monitor enabled and can see the processing. Since all 8 cores are running at full power (all bars are up to the top) for a quite some time, I wonder, if the CPUs could overhead? Since I have no more warranty, I don't want to take the risk of needing the logic board replaced because of that.
But on the other hand, I need to get my videos out as fast as possible.
Dorian

Unless you already have a hardware fault, there's no danger of overheating. If the fans can't keep the CPU temperatures within the safe range, then the SMC will throttle them back and eventually shut down the system, if necessary.

I have a iPad 1 (first one) I downloaded some movies from iTunes and with full volume I can barely hear them, but the apps I have downloaded are much louder. Any suggestions

I have a iPad 1 (first one) I downloaded some movies from iTunes and with full volume I can barely hear them, but the apps I have downloaded are much louder. Any suggestions

She must have signed into her own Apple ID on your iPad in order to sync her content from iTunes so try this and see if it works.
Settings>Store>Apple ID. See if your ID is showing in there and if it isn't - tap on her ID, sign out and then sign in with yours.
You should not be syncing to to different iTunes libraries. The iPad can only sync with one iTunes library without erasing the the content on it if you decide to sync to another iTunes library.

Issues getting the full volume from my iphone 5

Hi,
I am having issues getting full volume from my iphone 5 when playing iTunes or videos online.
I have checked that the volume on all my apps is turned up.
The ringer works fine and is loud. But iTunes says it is at full volume (on speaker) but it is clearly playing at around 50% or less.
Has anyone seen this before or got a solution?
Thanks!

Day 3 an still not activated. Called VZW back and they still have not taken care of this issue. They told me to insert the sim card in repeatedly or take the phone back to apple. Then they called Apple while I was om the phone and then told me to get a new sim card. I went into the VZW store and was treated like crap where they told me that there is absolutely no one that can help me because the problem is apple sold me the wrong phone. Funny thing is both VZW and Apple on 2 separate con calls said that the phone should work and this is already the second phone apple reissued!!!
VZW your service sucks. The people in your stores are rude and I am so very disappointing to be a VZW customer. The phones that are up for renewal will not be renewed with Verizon wireless.

Volume keys: F10, F11, F12 stopped working as volume keys. How to reset?

On the MacBook, 13 inch OS X Version 10.8.2, Volume keys: F10, F11, F12 stopped working as Volume keys. How do I reset them back to functio as the Volume keys?

System Preferences>Keyboard:
- this is from Snow Leopard so Mountain Lion may be slightly different but the principle should be the same. If it isn't you need to ask in the Mountain Lion forum.

Sound volume low full volume can't hardly hear it hp g71 notebook

I cannot get volume loud enough to hear with full volume. volume slides seem to work but very low volume when turned full up.

To go a few steps further on what Peter has provided on the Speaker Icon, right-click and choose "Playback devices", then highlight "Speakers", which should be selected as the "default" for playback, then select "Properties", then choose the "Enhancements" tab and check-mark the "Loudness Equalization" for a possible audio boost. Hope this provides some joy.

Creative Zen 16gb goes crazy when FULL volume - 25 (with UE 5 P

I dunno if anyone in here have this problem!!! My zen goes crazy when i pump up the volume FULL. It has problem with MP3, AAC (Nero AAC) works fine. My mp3s are all LAME 3.97 vbr V0. And its surprising, when i use custom EQ setting even the MP3 works fine with FULL volume but once I change it to preset ROCK or anything else the sound goes cracking. My UE 5 pro's sound goes ON and OFF and the CRACKING sound is killing me. BTW I am using latest firmware version
(Creative ZEN Firmware .2.0). Any Idea! Thanks in Adv.

Just want to comment on the sound quality. With my player it's the opposite direction; sounds for videos are not as good as with my mp3 and wma files, but it's nowhere near bad either. With my set of Koss PortaPro the?sound is outstanding with the music.

Laptop Freezing, when Listening Music with full volume (Very Loud)

1. Product Name and Number
Product Name: HP Pavilion g6 Notebook Pc
Product Number: LQ283EA#ABE
2. Operating System installed
Windows 7 64-bit
3. Error message (if any)
None
4. Any changes made to your system before the issue occurred
None
5. Problem Description:
As I sad Laptop Freezing, when Listening Music with full volume (Very Loud),
exactly : When I start Playing music after some time , the problem occurs. It does not responds anymore and
very loud and strange voice comes from laptop speakers ,I have to turn off laptop with long power button press;
solution : the only one solution i found is to listen to music only with low volume funny is not it ?
It seem´s to be an hdd problem , may loud music vibration couses Hdd To Freez , hdd indicator bulb is nod lighting during freez , I am Programmer , so I Tested HDD for errors , thre is None ....
Anyone has this kindo of problem or Knows any solution ? (May I am wrong , and this is not HDD)
Thanks , all

Can't answer the query, since I don't use thumb drives and my volume's very responsive. That said, please don't post using ALL CAPS. That's considered shouting and is very disconcerting.

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

[Emergency] SBS a320 speker system working full volume

Similar Messages

Maybe you are looking for