EMMA Not Working for Billing & Invoicing Cases

Hi
I have configured case type and case category for Billing Block - Message type AJ063. Cases are not getting created through EMMA. Where as in ECC 6.0 EHP 0 the same was working. Is there any Note required for ECC 6.0 EHP 2. To be precise Current version is SAPK-60202INISUT. Also to add this we see message that jobs preapred. But when we looked into EMMA executed with Radio button Prepared Jobs enabled then No relavant jobs shown. Same thing happened with AJ098 also.

Hi PRESII,
This problem is generally observed in ECC 6.02 support level 03 and below. after you upgrade it from ECC 6.0. SAP has done the chnages and incorporated the same in ECC 6.02 support level 04. I suggest that you upgrade your support level 4 or later and your problem should be solved.
Cheers,
Amin

Similar Messages

EXIT_SAPLV50E_001 User Exit is not working for multiple plants case

Hi,
I have to update foreign trade data in Invoice during invoice creation using VF11. For that, I have written code in EXIT_SAPLV50E_001 and updated segal value. This functionality is working fine, if I have a single plant in an invoice. But customer has scenario where they can have multipl plants in an invoice.
For multiple plants in an invoice, this EXIT_SAPLV50E_001 is not called.
I am unable to find another better place where in I could place my code. Please help. Remember, case in multiple plants.
Will be rewarded.
Regards
Arpit

Hi Arpit,
               Please use below mentioned user exit in T-code VF11
he following user exits are available for tcode VF11
Exit Name           Description
SDVFX001            User exit header line in delivery to accounting
SDVFX002            User exit for A/R line in transfer to accounting
SDVFX003            User exit cash clearing in transfer to accounting
SDVFX004            User exit G/L line in transfer to accounting
SDVFX005            User exit reserves in transfer to accounting
SDVFX006            User exit tax line in transfer to accounting
SDVFX007            User exit: Billing plan during transfer to Accounting
SDVFX008            User exit: Processing of transfer structures SD-FI
SDVFX009            Billing doc. processing KIDONO (payment reference number)
SDVFX010            User exit item table for the customer lines
SDVFX011            Userexit for the komkcv- and kompcv-structures
V05I0001            User exits for billing index
V05N0001            User Exits for Printing Billing Docs. using POR Procedure
V60A0001            Customer functions in the billing document
V60P0001            Data provision for additional fields for display in lists
V61A0001            Customer enhancement: Pricing
J_3RSINV            Customer enhancement: Pricing
or You can use BADI
BADI_SD_SALES_BASIC
BADI_SD_TO_FM
BADI_SD_BILLING
Regards,
    Thangam.P

ON CHANGE OF is not working for the below case

Hi,
I had a problem with ON CHANGE OF as below
select * from vbap into gt_vbap where vbeln in s_vbeln.
loop at gt_vbap into ls_vbap where posnr ne '00010'.
   on change of posnr.
   endon.
endloop.
in gt_vbap i have only items 10 & 20 for a Sales Order No so in loop on change of is not triggering because remain line item
is only 20.
can anyone explain me how to solve it

You need not use ON CHANGE OF....
Try using this code:
SORT gt_vbap by posnr.
Get the index of record
READ TABLE gt_vbap into ls_vbap with key posnr = '00010'
             transporting no fields binary search.
if sy-subrc eq 0.
l_index = sy-index.
Read from next line
add 1 to l_index.
Loop at internal table from next line after posnr = '00010'....
loop at gt_vbap into ls_vbap from l_index.
Write your logic in this loop
endloop.
endif.
Regards,
Santosh

Deliveries Showing as 'not relevant for billing' after Invoice Cancellation

Hi,
We have a plants abroad scenario, where the billing document (plants abroad invoice) had to be cancelled because of wrong profit centres. After correction of data, when we are trying to invoice these deliveries, the system shows these as 'not relevant for billing'. Any idea what could have caused this and/ or how to correct this?
Thanks in advance for the help,
Regards,
alok

HI Alok,
Could you please recheck the delivery document flow again, its only Billing document is cancelled or PGI reversal is also done or not.
As per my knowledge G/L correction is nothing to do with 'not relevant for billing' or "relevant for billing".
Try again there might be a case where delivery might have been reversed or billing document has not been cancelled or Document might have been blocked.
Regards,
Nagesh

I have an Iphone 4 and my internet has not worked for a good 10 months, why wont it work? my dad pays for my data plan, so its not that i dont pay my bill. I've even tried to reset my net work settings, and that did not work

i have an iphone 4 and my internet has not worked for a good 10 months, why wont it work? My dad pays for my data plan, so its not that i dont pay the bill. I've even tried to rest my net work settings, and that did not work. I went to AT&T and they said that the only way to fix it was to buy a new phone, and im not going to buy a new phone with out my upgrade. someone, please help!

Hey lilmissindian!
I have an article for you here that will help you troubleshoot this issue:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

Warranty and support is only valid in the country of origin. The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
Warranty is determined by device (serial number), no documentation required.
Apple does not repair devices, they replace them. For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service.

Error while SO Invoice 'The Item Is Not Relevant For Billing'

Hi Colleagues,
I have created a Time and Material Project and when I am trying to Invoice the SO related to particular Project request getting below Error.
Errro Description :-
"The item is not relevant for billing"
Schedule Line Number 0044
Counter in Control Tables 00
Message Identification VF
System Message Number 044
Output Type I
Message Variable 01
Message Variable 02
Message Variable 03
Message Variable 04
Group Type F
Background :-
I created a Project
Entered the time sheet
Run CATS :- Transfer to Project system
Display actual cost line items
Run RRB and created billing request
In the time of Invoicing SO getting error.
I have checked all the configuration but unable to sort out the problem.
Please suggest me if I missed something or need to change the configuration.
Thanks in Advance
Regards
Manoj Bansal

Hi Venu,
Thanks for you reply..
1. I have maintained Billing Relevance "C"
2. Copy Control Setting is sound good.
3. There is no billing block on SO.
4. We have CndType line item :- EKO2 and Billing Type :- 02.
Please let me know if any further setting is required.
Regards
Amitesh

Document is not relevant for billing

Dear All,
We are implementing ECC 6 in one of our client.
Our client manufacturer of x finished product, they want monitor the production process through Project system and deliver should be through project system,
We did the complete configuration from Production order till delivery in PS is working fine.
But when we try to post billing document from the delivery document, the system is showing the following error,
Document is not relevant for billing: LP is not relevant for F2.
Our doubt is in this process, whether excise invoice will be generated or not?
this LP is hard coded in SAP, We are unable to rectify the error,
our GO-LIVE date is 1st March
can any one help us to solve this issue?
Thanks in advance
regards
Elango

LP is not relevant for F2
What is LP ?? Is it Delivery type or Item Category ?? Nevertheless, copy control is missing in VTFL.
whether excise invoice will be generated or not?
If physical material movement is there from a manufacturing plant to outside, then definitely, you should generate an excise invoice
thanks
G. Lakshmipathi

Item not relevant for billing - Batch Management

Dear Experts,
I'm testing the Batch Management with the configuration detalied on the Building Block - J19 from SAP. So I've created a new item position called YG05 which is working for the batch spliting.
But now the problem is that when I'm billing with Tx VF04 or VF01 it gives me the following error and doesn't create the invoice.
VF 044 The item is not relevant for billing
Now, the problem fixes when I go to Tx VTFL and change the position TAN in the field Copying Requirements from 004 Delivery - Related Item to 003 Header / Dlv. - Related. I can do the billing, but when the system print the invoices it print for each position type, I mean this.
"Before the system printed 3 copies of the invoice, but now not only print the 3 copies, now it send printing the 3 copies and also 3 blank pages (i assume that those are por the YG05 position"
If anyone have and advice if the fix i did first is correct.... And also have a solution for this last problem. Please reply...
Thanks
Javier Sandoval Vera
Universal Sweet Industries
Edited by: Javier Sandoval on Feb 12, 2009 4:46 PM

Hi Javier,
for correct settings please check sap note 77414, choose your process and change your settings accordingly.
Balazs

VF06 not working for drop ship orders

Hi All,
We use VF06 for creating billing docs. Interesting it works good for all order/delivery types but does not create any billing document for third party sales orders. I have flagged both - order related and delivery realted document indicators and leaving all the selection inputs blank except for the sales org. When we try to create the invoice for a drop ship order, it gets created but surprisingly does not get picked up in VF04 or VF06.
Any help would be appreciated.
Thanks & Regards,
Vidya

Hi,
I did go through some notes and could find out the problem. In copy controls we have set the billing quantity to F to enable billing even if GR is done for the PO and need nt have the Vendor Invoice Recipet to be done. SAP says in some notes that if this is set, then the billing due list will not have the order displayed even if it can be manually invoices. But I dont have any idea how to overcome this. SAP has provided standard reports but somehow these reports are not working for me.
Thanks & Regards,
Vidya

The Item Is not relevent for billing

Hi gurus
while I am trying to create a billing document with VF01 respect to particular billing document, it is showing in the log "The Item Is not relevent for billing" afert processing.
I want to know what what are the cases in which you will find this error and what should i do to overcome this error??
regards
Saifur Rahaman

select ur Item category using path
IMG -> Sales --> Sales documents --> sales document item --> define item categories
and check in basic data whether u have marked this ITEM Category as Billing Relevance or not
A     Delivery-related billing document
B     Relevant for order-related billing - status acc.to order qty
C     Relevant for ord.-related billing - status acc.to target qty
D     Relevant for pro forma
F     Order-related billing doc. - status according to invoice qty
G     Order-related billing of the delivery quantity
H     Delivery-related billing - no zero quantities
I     Order-relevant billing - billing plan
J     Relevant for deliveries across EU countries
K     Delivery-related invoices for partial quantity
L     Pro forma - no zero quantities
M     Delivery-related invoices-no zero qtys (incl main batch itm)
N     Pro forma - no zero quantities (including main batch items)
P     Delivery-related invoices for CSFG - No batch split items
Q     Delivery-related invoices for CRM
R     Delivery-related invoices for CRM - No zero quantities
S     IBS-DI: Order-Related Bill. Doc. with DP w/o Billing Plan
T     Delivery-related invoices for CRM with IV in CRM
U     Delivery-rel. invoices for CRM with IV in CRM - No zero qtys
V     Delivery-related IV of stock transport orders in CRM

The document is not relevant for billing

Hi Experts,
I have a problem while doing STO from plant to depot. I am not able to generate Proforma Invoice. I am using following steps:
ME21N, VL10B, VF01.
I have check all my setting of STO. And I have set Billing Relevance-D (Relevant for proforma) to Item Category NLN.
I am getting the following error in vf01:-
0080015463 000000 The document is not relevant for billing.
Please reply and thanx in advance.

Hi,
Can you check if both the Plants used are belonging to two different Company Codes?
If both Plants are from the same Company Code, you would not be able to create Billing document in this case.
After that, could you also confirm the type of STO type that you are using? Is it UB or NB?
Where inter-company is concern, when you use STO Type = NB, then inter-company billing should be able to be created without any problem.
For intra-company, you may use STO type = UB.
If all the checking is OK, you may want to check also the copy controls in VTFL.
Hope the above helps.
Thanks.
Rgds.

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
I came home, banged the phone against the wall and it worked.
Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

EMMA Not Working for Billing & Invoicing Cases

Similar Messages

Maybe you are looking for